diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2018-11-06 22:37:43 +0900 |
|---|---|---|
| committer | John Crispin <john@phrozen.org> | 2018-11-26 12:28:17 +0100 |
| commit | 879f2ef7c0720c49f0911a6a3a7f8fe4111c2acb (patch) | |
| tree | 32df454ec54dcb2f9df409963fdea85ed9f9ff4e /target/linux/ath79/base-files/lib | |
| parent | d6e92b18d9ab853a34313a0f78f98b763dc9eba4 (diff) | |
| download | upstream-879f2ef7c0720c49f0911a6a3a7f8fe4111c2acb.tar.gz upstream-879f2ef7c0720c49f0911a6a3a7f8fe4111c2acb.tar.bz2 upstream-879f2ef7c0720c49f0911a6a3a7f8fe4111c2acb.zip | |
ath79: modify mtd partitions for Buffalo BHR-4GRV2
This commit modifies mtd partitions define for Buffalo BHR-4GRV2 and
move it to generic subtarget.
In Buffalo BHR-4GRV2, "kernel" partition is located behined "rootfs"
partition in the stock firmware. This causes the size of the kernel
to be limited by the fixed value.
0x50000 0xe80000 0xff0000
+-------------------------------+--------------+
| rootfs | kernel |
| (14528k) | (1472k) |
+-------------------------------+--------------+
After ar71xx was updated to Kernel 4.14, the kernel size of BHR-4GRV2
exceeded the limit, and it breaks builds on official buildbot.
Since this issue was also confirmed in ath79, I modified the mtd
partitions to get rid of that limitation.
0x50000 0xff0000
+----------------------------------------------+
| firmware |
| (16000k) |
+----------------------------------------------+
However, this commit breaks compatibility with ar71xx firmware, so I
dropped "SUPPORTED_DEVICES += bhr-4grv2".
This commit requires new flash instruction instead of the old one.
Flash instruction using initramfs image:
1. Connect the computer to the LAN port of BHR-4GRV2
2. Set the IP address of the computer to 192.168.12.10
3. Rename the OpenWrt initramfs image to
"bhr4grv2-uImage-initramfs-gzip.bin" and place it into the TFTP
directory
4. Start the tftp server on the computer
5. While holding down the "ECO" button, connect power cable to
BHR-4GRV2 and turn on it
6. Flashing (orange) diag LED and release the finger from the button,
BHR-4GRV2 downloads the intiramfs image from TFTP server and boot
with it
7. On the initramfs image, create "/etc/fw_env.config" file with
following contents
/dev/mtd1 0x0 0x10000 0x10000
8. Execute following commands to add environment variables for
u-boot
fw_setenv ipaddr 192.168.12.1
fw_setenv serverip 192.168.12.10
fw_setenv ethaddr 00:aa:bb:cc:dd:ee
fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
9. Perform sysupgrade with squashfs-sysupgrade image
10. Wait ~150 seconds to complete flashing
And this commit includes small fix; BHR-4GRV2 has QCA9557 as a SoC,
not QCA9558.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/base-files/lib')
| -rw-r--r-- | target/linux/ath79/base-files/lib/upgrade/platform.sh | 4 |
1 files changed, 0 insertions, 4 deletions
diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh index 806b3f0787..a7cb455b8e 100644 --- a/target/linux/ath79/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh @@ -22,10 +22,6 @@ platform_do_upgrade() { local board=$(board_name) case "$board" in - buffalo,bhr-4grv2) - PART_NAME="rootfs:kernel" - default_do_upgrade "$ARGV" - ;; ubnt,routerstation|\ ubnt,routerstation-pro) routerstation_do_upgrade "$ARGV" |