diff options
| author | Joan Moreau <jom@grosjo.net> | 2019-03-31 04:26:22 +0000 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2019-08-09 17:07:07 +0200 |
| commit | 9ed272fe950029c88189ba24d4b3594cd52c176c (patch) | |
| tree | 67d0fdd37fa144b586ca01ae60592475b32e1d1d /target/linux/ath79/base-files/etc | |
| parent | d8c62c40297feabb6bfd2c091588070a2e3fc11c (diff) | |
| download | upstream-9ed272fe950029c88189ba24d4b3594cd52c176c.tar.gz upstream-9ed272fe950029c88189ba24d4b3594cd52c176c.tar.bz2 upstream-9ed272fe950029c88189ba24d4b3594cd52c176c.zip | |
ath79: add support for Comfast WR650AC v1/v2
This is a dual band 11a/11n router with 1x wan and 4x gig lan ports.
There are two versions of this router which can be identified through
the factory web interface, v1 has 128mb ram and a uboot size of 128k,
v2 has 256mb ram and a uboot size of 256k, the remaining hardware and
PCB markings are the same.
Short specification:
SoC: Qualcomm Atheros QCA9558 - 720 MHz
Switch: Atheros AR8327
Second radio : Qualcomm Atheros QCA9880 802.11ac
4 LAN/1 WAN 1000Mps Ethernet
256 MB of RAM (DDR2)
16 MB of FLASH
3x2.4 GHz, 3x5GHz antennas
Steps to install :
Option A : Use vendor UI
Option B (if A is not working) :
(a) Download 'backup' from vendor UI and rename it backup.tar.gz
(b) Open the archive, and update the root password in /etc/shadow by
'$1$9wX3HGfB$X5Sb3kqzzBLdKRUR2kfFd0'
(c) 'Restore' from the archive using the vendor UI. Root password is now
'aaa'
(d) Scp the firwmware to the device:
$ scp <openwrt-sysupgrade>.bin root@192.168.1.1:/
(d) ssh to the device and flash the firmware:
$ cd /
$ mtd -e firmware -r write <openwrt-sysupgrade>.bin firmware
Signed-off-by: Gareth Parker <gareth41@orcon.net.nz>
Signed-off-by: Ding Tengfei <dtf@comfast.cn>
Signed-off-by: Joan Moreau <jom@grosjo.net>
[reformatted commit message]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 6 | ||||
| -rw-r--r-- | target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 8 |
2 files changed, 11 insertions, 3 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index dd9fa3c36b..466a0ee684 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -111,6 +111,12 @@ ath79_setup_interfaces() ubnt,routerstation) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + comfast,cf-wr650ac-v1|\ + comfast,cf-wr650ac-v2) + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1" + ;; devolo,dvl1200e|\ devolo,dvl1750e|\ ocedo,ursus) diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 501053e9d7..6f50a47271 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -87,6 +87,11 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in + comfast,cf-wr650ac-v1|\ + comfast,cf-wr650ac-v2|\ + yuncore,a770) + ath10kcal_extract "art" 20480 2116 + ;; devolo,dvl1200e|\ devolo,dvl1200i|\ devolo,dvl1750c|\ @@ -182,9 +187,6 @@ case "$FIRMWARE" in ubnt,unifiac-pro) ath10kcal_extract "EEPROM" 20480 2116 ;; - yuncore,a770) - ath10kcal_extract "art" 20480 2116 - ;; esac ;; "ath10k/pre-cal-pci-0000:00:00.0.bin") |