aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-05-06 15:29:16 +0200
committerChristian Lamparter <chunkeey@gmail.com>2019-05-18 16:38:18 +0200
commitd4b89b7170ab82530cfaf21e5f00bee7088432e2 (patch)
treed03aab5ed32694c3230857e30c6d0ebe1b84c9a2 /target/linux/ath79/base-files/etc
parent78ea648a3a4efef6b953b6c5958dc569e59d94df (diff)
downloadupstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.tar.gz
upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.tar.bz2
upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.zip
ath79: Add support for TP-Link TL-WR1043N v5
Specifications: - QCA9563 at 775 MHz - 64 MB RAM Zentel A3R12E40CBF-8E - 16 MB flash Winbond W25Q128FVSG - 3 (non-detachable) Antennas / 450 Mbit - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) - reset and Wi-Fi buttons TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, except that the USB port has been removed and there is no longer a removable antenna option. It also has different partitioning scheme. The software is more in line with the Archer series in that it uses a nested bootloader scheme. (This has been adapted from the OpenWrt Wiki page) <https://openwrt.org/toh/tp-link/tl-wr1043nd> Installation on HW rev.5: Factory firmware can be installed via the WEB interface. Alternatively, it is also possible to use a TFTP server for recovery purposes: - Rename OpenWRT or original firmware to WR1043v5_tp_recovery.bin - Set static IP of your PC to *192.168.0.66* - Router will obtain IP 192.168.0.86 for a few seconds while loading, when reset button pressed at power On. And finally, there's always u-boot access through the UART. For information visit the wiki. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworked commit message]
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network6
2 files changed, 6 insertions, 3 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 40aacab331..9bcfbb2b0a 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -110,7 +110,8 @@ tplink,archer-c7-v5)
ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20"
;;
tplink,archer-c2-v3|\
-tplink,tl-wr1043nd-v4)
+tplink,tl-wr1043nd-v4|\
+tplink,tl-wr1043n-v5)
ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 25f6f5bead..5892baca80 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -96,7 +96,8 @@ ath79_setup_interfaces()
dlink,dir-859-a1|\
engenius,epg5000|\
tplink,archer-c2-v3|\
- tplink,tl-wr1043nd-v4)
+ tplink,tl-wr1043nd-v4|\
+ tplink,tl-wr1043n-v5)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
@@ -343,7 +344,8 @@ ath79_setup_macs()
base_mac=$(mtd_get_mac_binary config 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
- tplink,tl-wr1043nd-v4)
+ tplink,tl-wr1043nd-v4|\
+ tplink,tl-wr1043n-v5)
base_mac=$(mtd_get_mac_binary product-info 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;