diff options
| author | Sven Roederer <devel-sven@geroedel.de> | 2019-03-25 00:03:19 +0100 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-04-13 14:39:59 +0200 |
| commit | e0d98e120a94b75f63066d7abc6a392996ccb284 (patch) | |
| tree | 9cbc153a69460881da2777d44592b4a81718efe9 /target/linux/ath79/base-files/etc | |
| parent | 9385ff654e4d9ef1270b2cbb411be3754513c9ed (diff) | |
| download | upstream-e0d98e120a94b75f63066d7abc6a392996ccb284.tar.gz upstream-e0d98e120a94b75f63066d7abc6a392996ccb284.tar.bz2 upstream-e0d98e120a94b75f63066d7abc6a392996ccb284.zip | |
ath79: add TP-Link WR842N v3
This adds support for the TP-Link WR842N v3 which is already supported on ar71xx
target (0b45bec22c59cc6e6b2fa71dc9a88386c5587132).
Specification:
* SoC: QCA9533 ver 2 rev 0
* 16 MB Flash (gd25q128)
* 64 MB RAM
* 1 WAN 10/100 MBit/s (blue connector)
* 4 LAN 10/100 MBit/s (AR8229; 4 ports; yellow connectors)
* Atheros AR9531 (2,4GHz, two fixed antennas)
* USB
* Reset / WPS button
* WiFi button (rf kill)
* 8 green leds; 1 red/green led
* serial console (115200 8N1, according to the OpenWrt-wiki some soldering is needed)
Installation:
* flash via vendor WebUI (the filename must not exceed certain length)
* sysupgrade from installed OpenWrt (also ar71xx)
Thanks to Holger Drefs for providing the hardware
Tested-by: @kofec (github)
Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 1 |
2 files changed, 3 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index af26425da2..9c353baabe 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -163,7 +163,8 @@ tplink,tl-wr842n-v2) ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" ;; tplink,tl-wr841-v9|\ -tplink,tl-wr841-v11) +tplink,tl-wr841-v11|\ +tplink,tl-wr842n-v3) ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 2f4fb62a5f..f877669f98 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -180,6 +180,7 @@ ath79_setup_interfaces() tplink,tl-mr3420-v1|\ tplink,tl-wr841-v9|\ tplink,tl-wr841-v11|\ + tplink,tl-wr842n-v3|\ ubnt,airrouter) ucidef_set_interface_wan "eth0" ucidef_add_switch "switch0" \ |