diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-03-25 18:46:26 +0100 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2019-04-02 02:10:59 +0200 |
| commit | 141698ce8fbc52d253c9207ef46b3630a0870567 (patch) | |
| tree | 8226c8567b438f718199ed4c416d06945b8fd672 /target/linux/ath79/base-files/etc | |
| parent | 5ec205d7ac00de89510a6e71055d45aa57b705e1 (diff) | |
| download | upstream-141698ce8fbc52d253c9207ef46b3630a0870567.tar.gz upstream-141698ce8fbc52d253c9207ef46b3630a0870567.tar.bz2 upstream-141698ce8fbc52d253c9207ef46b3630a0870567.zip | |
ath79: Add support for TP-Link CPE210 v2
This PR adds support for a popular low-cost 2.4GHz N based AP
Specifications:
- SoC: Qualcomm Atheros QCA9533 (650MHz)
- RAM: 64MB
- Storage: 8 MB SPI NOR
- Wireless: 2.4GHz N based built into SoC 2x2
- Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on
for around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
This is based on the support patch for the identical CPE210 v3
by Mario Schroen <m.schroen@web.de>.
Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[renamed dtsi filename]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/01_leds | 1 | ||||
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 1 |
2 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 47fac18281..af26425da2 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -123,6 +123,7 @@ tplink,archer-c6-v2) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C" ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02" ;; +tplink,cpe210-v2|\ tplink,cpe210-v3) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 1041af561e..fbf15e4ed8 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -19,6 +19,7 @@ ath79_setup_interfaces() pcs,cap324|\ pisen,wmm003n|\ pqi,air-pen|\ + tplink,cpe210-v2|\ tplink,cpe210-v3|\ tplink,re350k-v1|\ tplink,re450-v2|\ |