aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-01-01 19:17:23 +0100
committerChristian Lamparter <chunkeey@gmail.com>2019-01-05 21:55:22 +0100
commitc8115167f946be85f812f3c94d6294b67ac8944c (patch)
tree5eecd280d999a0081af4bd015f980a933147db26 /target/linux/ath79/base-files/etc
parent8d68be8057d6c689025cc236d20b96b77a6ccf30 (diff)
downloadupstream-c8115167f946be85f812f3c94d6294b67ac8944c.tar.gz
upstream-c8115167f946be85f812f3c94d6294b67ac8944c.tar.bz2
upstream-c8115167f946be85f812f3c94d6294b67ac8944c.zip
ath79: add support for devolo WiFi pro 1200i
Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) WiFi2: QCA9558 2T2R WiFi5: QCA9880 2T2R BTN: 1x Reset LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to reset-button Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
2 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 0b1a5f39a1..3eb0e413f3 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -10,6 +10,7 @@ ath79_setup_interfaces()
case "$board" in
avm,fritz300e|\
+ devolo,dvl1200i|\
devolo,dvl1750c|\
devolo,dvl1750i|\
ocedo,koala|\
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 9fc0f80569..76efa24b52 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -88,6 +88,7 @@ case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
devolo,dvl1200e|\
+ devolo,dvl1200i|\
devolo,dvl1750c|\
devolo,dvl1750i)
ath10kcal_extract "art" 20480 2116