aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-11-30 19:04:23 +0900
committerMathias Kresin <dev@kresin.me>2018-12-06 20:26:57 +0100
commit3358cae5238d66c73b0328b007a1cbb073bc8275 (patch)
tree65011b51cf01491bfed2d6f61c5187eafa22bb23 /target/linux/ath79/base-files/etc
parent9dd7147f6bce44a49fef594f55b120253baf5556 (diff)
downloadupstream-3358cae5238d66c73b0328b007a1cbb073bc8275.tar.gz
upstream-3358cae5238d66c73b0328b007a1cbb073bc8275.tar.bz2
upstream-3358cae5238d66c73b0328b007a1cbb073bc8275.zip
ath79: add support for I-O DATA WN-AG300DGR
I-O DATA WN-AG300DGR is a 2T2R 2.4/5 GHz 11n router, based on Atheros AR1022. WN-AG300DGR does not have an LED to indicates power or system status, I set "router" LED as OpenWrt status LED. There is no eeprom data for 5 GHz wlan in "art" partition. Specification: - Atheros AR1022 - 64 MB of RAM (DDR2) - 8 MB of Flash (SPI-NOR) - 2T2R 2.4/5GHz wifi - 2.4 GHz: SoC internal - 5 GHz: Atheros AR93x2 - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 6x keys (4x buttons, 1x slide switch) - 1x USB 2.0 Type-A - UART through-hole on PCB - Vcc, GND, TX, RX from ethernet port side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port on WN-AG300DGR 2. Connect power cable to WN-AG300DGR and turn it 3. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac6
3 files changed, 11 insertions, 2 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 266a18791a..fa7a618909 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -82,6 +82,7 @@ ath79_setup_interfaces()
iodata,etg3-r|\
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2|\
+ iodata,wn-ag300dgr|\
pcs,cr5000)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
@@ -223,7 +224,8 @@ ath79_setup_macs()
wan_mac=$(macaddr_add "$lan_mac" -1)
;;
iodata,wn-ac1167dgr|\
- iodata,wn-ac1600dgr2)
+ iodata,wn-ac1600dgr2|\
+ iodata,wn-ag300dgr)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index c5cbac7514..e4d4a597a9 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -101,7 +101,8 @@ case "$FIRMWARE" in
ath9k_eeprom_extract_reverse "urlader" 5441 1088
;;
iodata,wn-ac1167dgr|\
- iodata,wn-ac1600dgr2)
+ iodata,wn-ac1600dgr2|\
+ iodata,wn-ag300dgr)
ath9k_eeprom_extract "art" 4096 1088
ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index fe5aa64a19..bb55b1c11c 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -13,6 +13,12 @@ PHYNBR=${DEVPATH##*/phy}
board=$(board_name)
case "$board" in
+ iodata,wn-ag300dgr)
+ # There is no eeprom data for 5 GHz wlan in "art" partition
+ # which would allow to patch the macaddress
+ [ "$PHYNBR" -eq 1 ] && \
+ echo $(macaddr_add "$(mtd_get_mac_ascii u-boot-env ethaddr)" 1) > /sys${DEVPATH}/macaddress
+ ;;
phicomm,k2t)
# The K2T factory firmware does use LAN mac address as the 2.4G wifi mac address
[ "$PHYNBR" -eq 1 ] && \