aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc
diff options
context:
space:
mode:
authorKeith Maika <keithm@aoeex.com>2019-09-16 12:45:02 -0400
committerDavid Bauer <mail@david-bauer.net>2019-09-16 21:40:06 +0200
commit4cb5f296255889dd5e6bf0124badd414e85d27f5 (patch)
treec26e51af0053ce94faf8545beab6706f48c81812 /target/linux/ath79/base-files/etc
parent38ccacf99b77bc3f10dd672e693ced598036ae7d (diff)
downloadupstream-4cb5f296255889dd5e6bf0124badd414e85d27f5.tar.gz
upstream-4cb5f296255889dd5e6bf0124badd414e85d27f5.tar.bz2
upstream-4cb5f296255889dd5e6bf0124badd414e85d27f5.zip
ath79: add support for TP-Link Archer C59v2
Add ath79 support for Archer C59v2, previously supported by ar71xx. TP-Link Archer C59v2 is a dual-band AC1350 router based on Qualcomm/Atheros QCA9561+QCA9886 chips. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - UART header on PCB Flash instruction: - via web UI: 1. Download openwrt-ath79-generic-tplink_archer-c59-v2-squashfs-factory.bin 2. Login to router and open the Advanced tab 3. Navigate to System Tools -> Firmware Upgrade 4. Upload firmware using the Manual Upgrade form - via TFTP: 1. Set PC to fixed ip address 192.168.0.66 2. Download openwrt-ath79-generic-tplink_archer-c59-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Keith Maika <keithm@aoeex.com>
Diffstat (limited to 'target/linux/ath79/base-files/etc')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
3 files changed, 4 insertions, 1 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index e317ce26e1..778316e450 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -157,6 +157,7 @@ tplink,tl-wr842n-v3)
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
+tplink,archer-c59-v2|\
tplink,archer-c60-v1|\
tplink,archer-c60-v2)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 7d5f288536..5b47af8ef7 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -59,7 +59,8 @@ ath79_setup_interfaces()
avm,fritz4020|\
pcs,cr3000|\
tplink,archer-c58-v1|\
- tplink,archer-c59-v1)
+ tplink,archer-c59-v1|\
+ tplink,archer-c59-v2)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index ed3432273c..446b729a2b 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -214,6 +214,7 @@ case "$FIRMWARE" in
;;
tplink,archer-c58-v1|\
tplink,archer-c59-v1|\
+ tplink,archer-c59-v2|\
tplink,archer-c60-v1|\
tplink,archer-c60-v2|\
tplink,archer-c6-v2)