ath79: split base-files into subtargets

While most of the target's contents are split into subtargets, the
base-files are maintained for the target as a whole.

However, OpenWrt already implements a mechanism that will use (and
even prefer) files in the subtargets' directories. This can be
exploited to make several scripts subtarget-specific and thus save
some space (especially helpful for the tiny devices).

The only script remaining in parent base-files is
/etc/hotplug.d/ieee80211/00-wifi-migration, everything else is
moved/split.

Note that this will increase overall code lines, but reduce code
per subtarget.

base-files ipk size reduction:
master (generic)   49135 B
split (generic)    48533 B (- 0.6 kiB)
split (tiny)       43337 B (- 5.7 kiB)
split (nand)       44423 B (- 4.6 kiB)

Tested on TL-WR1043ND v4 (generic) and TL-WR841N v12 (tiny).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 161 deletions

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
deleted file mode 100644
index 14cfe64a41..0000000000
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ /dev/null
@@ -1,161 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath9k-eeprom-ahb-18100000.wmac.bin")
-	case $board in
-	avm,fritz4020)
-		caldata_extract_reverse "urlader" 0x1541 0x440
-		;;
-	dlink,dir-825-c1|\
-	dlink,dir-835-a1)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_text "mac" 0x4)
-		;;
-	dlink,dir-842-c1|\
-	dlink,dir-842-c2|\
-	dlink,dir-842-c3|\
-	dlink,dir-859-a1|\
-	nec,wg1200cr|\
-	wd,mynet-n750)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
-		;;
-	engenius,ecb1750)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1)
-		;;
-	engenius,epg5000|\
-	iodata,wn-ac1167dgr|\
-	iodata,wn-ac1600dgr|\
-	iodata,wn-ac1600dgr2|\
-	iodata,wn-ag300dgr|\
-	sitecom,wlr-7100)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
-		;;
-	nec,wg800hp)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
-		;;
-	qihoo,c301)
-		caldata_extract "radiocfg" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan24mac")
-		;;
-	zyxel,nbg6716)
-		caldata_extract "art" 0x1000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
-		;;
-	*)
-		caldata_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"ath9k-eeprom-pci-0000:00:00.0.bin")
-	case $board in
-	avm,fritz300e)
-		caldata_extract_reverse "urloader" 0x1541 0x440
-		;;
-	buffalo,whr-g301n|\
-	buffalo,wzr-hp-g302h-a1a0|\
-	tplink,tl-wr841-v5|\
-	tplink,tl-wr941-v4)
-		caldata_extract "art" 0x1000 0xeb8
-		;;
-	buffalo,wzr-hp-g450h)
-		caldata_extract "art" 0x1000 0x440
-		;;
-	dlink,dir-825-c1|\
-	dlink,dir-835-a1)
-		caldata_extract "art" 0x5000 0x440
-		ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
-		;;
-	ocedo,raccoon|\
-	tplink,tl-wdr3500-v1|\
-	tplink,tl-wdr3600-v1|\
-	tplink,tl-wdr4300-v1|\
-	tplink,tl-wdr4900-v2|\
-	winchannel,wb2000)
-		caldata_extract "art" 0x5000 0x440
-		;;
-	netgear,wnr1000-v2|\
-	netgear,wnr2000-v3|\
-	netgear,wnr612-v2|\
-	on,n150r|\
-	pcs,cap324|\
-	tplink,tl-mr3220-v1|\
-	tplink,tl-mr3420-v1|\
-	tplink,tl-wr2543-v1|\
-	tplink,tl-wr740n-v1|\
-	tplink,tl-wr740n-v3|\
-	tplink,tl-wr741-v1|\
-	tplink,tl-wr743nd-v1|\
-	tplink,tl-wr841-v7|\
-	tplink,tl-wr842n-v1|\
-	ubnt,airrouter|\
-	ubnt,bullet-m|\
-	ubnt,nano-m|\
-	ubnt,rocket-m)
-		caldata_extract "art" 0x1000 0x1000
-		;;
-	pqi,air-pen)
-		caldata_extract "art" 0x1000 0x7d2
-		;;
-	ubnt,unifi)
-		caldata_extract "art" 0x1000 0x800
-		;;
-	wd,mynet-n750)
-		caldata_extract "art" 0x5000 0x440
-		ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
-		;;
-	wd,mynet-wifi-rangeextender)
-		caldata_extract "art" 0x1000 0x1000
-		ath9k_patch_mac $(nvram get wl0_hwaddr)
-		;;
-	*)
-		caldata_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"ath9k-eeprom-pci-0000:00:11.0.bin")
-	case $board in
-	buffalo,wzr-hp-ag300h|\
-	netgear,wndr3700|\
-	netgear,wndr3700v2|\
-	netgear,wndr3800|\
-	netgear,wndr3800ch)
-		caldata_extract "art" 0x1000 0xeb8
-		;;
-	dlink,dir-825-b1)
-		caldata_extract "caldata" 0x1000 0xeb8
-		ath9k_patch_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
-		;;
-	*)
-		caldata_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-"ath9k-eeprom-pci-0000:00:12.0.bin")
-	case $board in
-	buffalo,wzr-hp-ag300h|\
-	netgear,wndr3700|\
-	netgear,wndr3700v2|\
-	netgear,wndr3800|\
-	netgear,wndr3800ch)
-		caldata_extract "art" 0x5000 0xeb8
-		;;
-	dlink,dir-825-b1)
-		caldata_extract "caldata" 0x5000 0xeb8
-		ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
-		;;
-	*)
-		caldata_die "board $board is not supported yet"
-		;;
-	esac
-	;;
-esac