treewide: convert WiFi caldata size and offset to hexadecimal

This changes size and offset set for WiFi caldata extraction and
MAC address adjustment to hexadecimal notation.

This will be much clearer for the reader when numbers are big, and
will also match the style used for mtd-cal-data in DTS files.

Since dd cannot deal with hexadecimal notation, one has to convert
back to decimal by simple $(($hexnum)).

Acked-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 37 insertions, 37 deletions

diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index b4c1e1d26d..f183bc5720 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -12,8 +12,8 @@ ath9k_eeprom_die() {
 
 ath9k_eeprom_extract() {
 	local part=$1
-	local offset=$2
-	local count=$3
+	local offset=$(($2))
+	local count=$(($3))
 	local mtd
 
 	mtd=$(find_mtd_chardev $part)
@@ -27,7 +27,7 @@ ath9k_eeprom_extract() {
 ath9k_eeprom_extract_reverse() {
 	local part=$1
 	local offset=$2
-	local count=$3
+	local count=$(($3))
 	local mtd
 	local reversed
 	local caldata
@@ -59,8 +59,8 @@ xor() {
 
 ath9k_patch_fw_mac() {
 	local mac=$1
-	local mac_offset=$2
-	local chksum_offset=$3
+	local mac_offset=$(($2))
+	local chksum_offset=$(($3))
 	local xor_mac
 	local xor_fw_mac
 	local xor_fw_chksum
@@ -98,12 +98,12 @@ case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
 	case $board in
 	avm,fritz4020)
-		ath9k_eeprom_extract_reverse "urlader" 5441 1088
+		ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
 		;;
 	dlink,dir-825-c1|\
 	dlink,dir-835-a1)
-		ath9k_eeprom_extract "art" 4096 1088
-		ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 2
+		ath9k_eeprom_extract "art" 0x1000 0x440
+		ath9k_patch_fw_mac_crc $(mtd_get_mac_text "mac" 0x4) 0x2
 		;;
 	dlink,dir-842-c1|\
 	dlink,dir-842-c2|\
@@ -111,28 +111,28 @@ case "$FIRMWARE" in
 	dlink,dir-859-a1|\
 	nec,wg1200cr|\
 	wd,mynet-n750)
-		ath9k_eeprom_extract "art" 4096 1088
-		ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
+		ath9k_eeprom_extract "art" 0x1000 0x440
+		ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
 		;;
 	engenius,ecb1750)
-		ath9k_eeprom_extract "art" 4096 1088
-		ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 2
+		ath9k_eeprom_extract "art" 0x1000 0x440
+		ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2
 		;;
 	engenius,epg5000|\
 	iodata,wn-ac1167dgr|\
 	iodata,wn-ac1600dgr|\
 	iodata,wn-ac1600dgr2|\
 	iodata,wn-ag300dgr)
-		ath9k_eeprom_extract "art" 4096 1088
-		ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
+		ath9k_eeprom_extract "art" 0x1000 0x440
+		ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2
 		;;
 	nec,wg800hp)
-		ath9k_eeprom_extract "art" 4096 1088
-		ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 2
+		ath9k_eeprom_extract "art" 0x1000 0x440
+		ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2
 		;;
 	qihoo,c301)
-		ath9k_eeprom_extract "radiocfg" 4096 1088
-		ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 2
+		ath9k_eeprom_extract "radiocfg" 0x1000 0x440
+		ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2
 		;;
 	*)
 		ath9k_eeprom_die "board $board is not supported yet"
@@ -142,28 +142,28 @@ case "$FIRMWARE" in
 "ath9k-eeprom-pci-0000:00:00.0.bin")
 	case $board in
 	avm,fritz300e)
-		ath9k_eeprom_extract_reverse "urloader" 5441 1088
+		ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
 		;;
 	buffalo,whr-g301n|\
 	buffalo,wzr-hp-g302h-a1a0|\
 	tplink,tl-wr841-v5|\
 	tplink,tl-wr941-v4)
-		ath9k_eeprom_extract "art" 4096 3768
+		ath9k_eeprom_extract "art" 0x1000 0xeb8
 		;;
 	buffalo,wzr-hp-g450h)
-		ath9k_eeprom_extract "art" 4096 1088
+		ath9k_eeprom_extract "art" 0x1000 0x440
 		;;
 	dlink,dir-825-c1|\
 	dlink,dir-835-a1)
-		ath9k_eeprom_extract "art" 20480 1088
-		ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 2
+		ath9k_eeprom_extract "art" 0x5000 0x440
+		ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2
 		;;
 	ocedo,raccoon|\
 	tplink,tl-wdr3600-v1|\
 	tplink,tl-wdr4300-v1|\
 	tplink,tl-wdr4900-v2|\
 	winchannel,wb2000)
-		ath9k_eeprom_extract "art" 20480 1088
+		ath9k_eeprom_extract "art" 0x5000 0x440
 		;;
 	netgear,wnr612-v2|\
 	on,n150r|\
@@ -181,21 +181,21 @@ case "$FIRMWARE" in
 	ubnt,bullet-m|\
 	ubnt,nano-m|\
 	ubnt,rocket-m)
-		ath9k_eeprom_extract "art" 4096 4096
+		ath9k_eeprom_extract "art" 0x1000 0x1000
 		;;
 	pqi,air-pen)
-		ath9k_eeprom_extract "art" 4096 2002
+		ath9k_eeprom_extract "art" 0x1000 0x7d2
 		;;
 	ubnt,unifi)
-		ath9k_eeprom_extract "art" 4096 2048
+		ath9k_eeprom_extract "art" 0x1000 0x800
 		;;
 	wd,mynet-n750)
-		ath9k_eeprom_extract "art" 20480 1088
-		ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 2
+		ath9k_eeprom_extract "art" 0x5000 0x440
+		ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2
 		;;
 	wd,mynet-wifi-rangeextender)
-		ath9k_eeprom_extract "art" 4096 4096
-		ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 2
+		ath9k_eeprom_extract "art" 0x1000 0x1000
+		ath9k_patch_fw_mac_crc $(nvram get wl0_hwaddr) "$mac" 0x2
 		;;
 	*)
 		ath9k_eeprom_die "board $board is not supported yet"
@@ -208,11 +208,11 @@ case "$FIRMWARE" in
 	netgear,wndr3700|\
 	netgear,wndr3700v2|\
 	netgear,wndr3800)
-		ath9k_eeprom_extract "art" 4096 3768
+		ath9k_eeprom_extract "art" 0x1000 0xeb8
 		;;
 	dlink,dir-825-b1)
-		ath9k_eeprom_extract "caldata" 4096 3768
-		ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 524
+		ath9k_eeprom_extract "caldata" 0x1000 0xeb8
+		ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c
 		;;
 	*)
 		ath9k_eeprom_die "board $board is not supported yet"
@@ -225,11 +225,11 @@ case "$FIRMWARE" in
 	netgear,wndr3700|\
 	netgear,wndr3700v2|\
 	netgear,wndr3800)
-		ath9k_eeprom_extract "art" 20480 3768
+		ath9k_eeprom_extract "art" 0x5000 0xeb8
 		;;
 	dlink,dir-825-b1)
-		ath9k_eeprom_extract "caldata" 20480 3768
-		ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 524
+		ath9k_eeprom_extract "caldata" 0x5000 0xeb8
+		ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c
 		;;
 	*)
 		ath9k_eeprom_die "board $board is not supported yet"