diff options
| author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-05-06 15:29:16 +0200 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-05-18 16:38:18 +0200 |
| commit | d4b89b7170ab82530cfaf21e5f00bee7088432e2 (patch) | |
| tree | d03aab5ed32694c3230857e30c6d0ebe1b84c9a2 /target/linux/ath79/base-files/etc/board.d | |
| parent | 78ea648a3a4efef6b953b6c5958dc569e59d94df (diff) | |
| download | upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.tar.gz upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.tar.bz2 upstream-d4b89b7170ab82530cfaf21e5f00bee7088432e2.zip | |
ath79: Add support for TP-Link TL-WR1043N v5
Specifications:
- QCA9563 at 775 MHz
- 64 MB RAM Zentel A3R12E40CBF-8E
- 16 MB flash Winbond W25Q128FVSG
- 3 (non-detachable) Antennas / 450 Mbit
- 1x/4x WAN/LAN Gbps Ethernet (QCA8337)
- reset and Wi-Fi buttons
TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4,
except that the USB port has been removed and there is no longer a
removable antenna option. It also has different partitioning scheme.
The software is more in line with the Archer series in that it uses a
nested bootloader scheme.
(This has been adapted from the OpenWrt Wiki page)
<https://openwrt.org/toh/tp-link/tl-wr1043nd>
Installation on HW rev.5:
Factory firmware can be installed via the WEB interface.
Alternatively, it is also possible to use a TFTP server
for recovery purposes:
- Rename OpenWRT or original firmware to WR1043v5_tp_recovery.bin
- Set static IP of your PC to *192.168.0.66*
- Router will obtain IP 192.168.0.86 for a few seconds while
loading, when reset button pressed at power On.
And finally, there's always u-boot access through the UART.
For information visit the wiki.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[reworked commit message]
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 6 |
2 files changed, 6 insertions, 3 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 40aacab331..9bcfbb2b0a 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -110,7 +110,8 @@ tplink,archer-c7-v5) ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20" ;; tplink,archer-c2-v3|\ -tplink,tl-wr1043nd-v4) +tplink,tl-wr1043nd-v4|\ +tplink,tl-wr1043n-v5) ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 25f6f5bead..5892baca80 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -96,7 +96,8 @@ ath79_setup_interfaces() dlink,dir-859-a1|\ engenius,epg5000|\ tplink,archer-c2-v3|\ - tplink,tl-wr1043nd-v4) + tplink,tl-wr1043nd-v4|\ + tplink,tl-wr1043n-v5) ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" ;; @@ -343,7 +344,8 @@ ath79_setup_macs() base_mac=$(mtd_get_mac_binary config 8) wan_mac=$(macaddr_add "$base_mac" 1) ;; - tplink,tl-wr1043nd-v4) + tplink,tl-wr1043nd-v4|\ + tplink,tl-wr1043n-v5) base_mac=$(mtd_get_mac_binary product-info 8) wan_mac=$(macaddr_add "$base_mac" 1) ;; |