aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ath79/base-files/etc/board.d
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-08-16 17:08:28 +0900
committerMathias Kresin <dev@kresin.me>2018-08-16 21:20:57 +0200
commitff4bc483fc5ff90c9b7a188236bb072351f201bd (patch)
tree89db91e26b939bf5862d8311e74b882def296ed4 /target/linux/ath79/base-files/etc/board.d
parent94ee5e3d1d2a473d1124b8d59fbe4f8c9442996a (diff)
downloadupstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.tar.gz
upstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.tar.bz2
upstream-ff4bc483fc5ff90c9b7a188236bb072351f201bd.zip
ath79: add support for I-O DATA WN-AC1167DGR
I-O DATA WN-AC1167DGR is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9557. Specification: - Qualcomm Atheros QCA9557 - 128 MB of RAM (DDR2) - 16 MB of Flash (SPI) - 2T2R 2.4/5 GHz wifi - 2.4 GHz: SoC internal - 5 GHz: QCA988x - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 6x keys (4x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of WN-AC1167DGR 2. Connect power cable to WN-AC1167DGR and turn on it 3. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network2
1 files changed, 2 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 653f813e01..603251954b 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -48,6 +48,7 @@ ath79_setup_interfaces()
glinet,ar300m)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
+ iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2|\
pcs,cr5000)
ucidef_add_switch "switch0" \
@@ -158,6 +159,7 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_text "caldata" 65440)
wan_mac=$(mtd_get_mac_text "caldata" 65460)
;;
+ iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)