diff options
author | Andrew Cameron <apcameron@softhome.net> | 2019-10-25 20:29:36 -0500 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-01-08 17:42:37 +0100 |
commit | 19ff3f5105791a31b27932e1bf2ad9e150604b6e (patch) | |
tree | e673a430d4547768b5c4d9cc1236b476c1947a63 /target/linux/ath79/base-files/etc/board.d/03_gpio_switches | |
parent | 44c827215d079daaea82d0b7e02049b04f345565 (diff) | |
download | upstream-19ff3f5105791a31b27932e1bf2ad9e150604b6e.tar.gz upstream-19ff3f5105791a31b27932e1bf2ad9e150604b6e.tar.bz2 upstream-19ff3f5105791a31b27932e1bf2ad9e150604b6e.zip |
ath79: add support for the TP-LINK CPE220 V3
This adds support for a popular low-cost 2.4GHz N based AP
Specifications:
SoC: Qualcomm Atheros QCA9533 (650MHz)
RAM: 64MB
Storage: 8 MB SPI NOR
Wireless: 2.4GHz N based built into SoC 2x2
Ethernet: 2x 100/10 Mbps, integrated into SoC
Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
This also applies some minor changes to the common DTSI:
- use &wmac for label-mac-device, as this one is actually set up in
common DTSI
- move ð0 to parent DTSI
- fix several leading spaces, added/removed newlines
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[DTS style fixes/improvements, updated commit message/title,
backport to 19.07]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d/03_gpio_switches')
-rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/03_gpio_switches | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches index 8a3312389c..e2fe3b350b 100755 --- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches @@ -27,6 +27,9 @@ tplink,archer-c25-v1) ucidef_add_gpio_switch "led_control" "LED control" "21" "0" ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1" ;; +tplink,cpe220-v3) + ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" + ;; ubnt,nanostation-ac) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3" ;; |