diff options
author | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-07-20 12:49:20 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2019-08-07 18:04:03 +0200 |
commit | 0104eed1e5ca93a1c912e2d9b70e800b8d3099ad (patch) | |
tree | 46f7172dfc36316615adf97854c13cc7646d6f29 /target/linux/ath79/base-files/etc/board.d/02_network | |
parent | 08857e69becc214336ba073bca6f626bfaa67781 (diff) | |
download | upstream-0104eed1e5ca93a1c912e2d9b70e800b8d3099ad.tar.gz upstream-0104eed1e5ca93a1c912e2d9b70e800b8d3099ad.tar.bz2 upstream-0104eed1e5ca93a1c912e2d9b70e800b8d3099ad.zip |
ath79: add support for TP-Link CPE510 v1
TP-Link CPE510-v1 is an outdoor wireless CPE for 5 GHz with
two Ethernet ports based on Atheros AR9334
Specifications:
- 560/450/225 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet, 1x PoE-in, 1x PoE-out
- 64 MB of DDR2 RAM
- 8 MB of SPI-NOR Flash
- 2T2R 5 GHz
- 13 dBi built-in antenna
- Power, LAN0, LAN1 green LEDs
- 4x green RSSI LEDs
Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254
Based on the work of Paul Wassi <p.wassi@gmx.at>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ath79/base-files/etc/board.d/02_network')
-rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 18dfe303ad..e8846f38f3 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -103,6 +103,7 @@ ath79_setup_interfaces() comfast,cf-e110n-v2|\ comfast,cf-e120a-v3|\ tplink,cpe210-v1|\ + tplink,cpe510-v1|\ ubnt,nanostation-m|\ ubnt,routerstation) ucidef_set_interfaces_lan_wan "eth1" "eth0" |