diff options
| author | Stijn Tintel <stijn@linux-ipv6.be> | 2021-08-07 02:41:11 +0300 |
|---|---|---|
| committer | Stijn Tintel <stijn@linux-ipv6.be> | 2021-12-21 21:37:46 +0200 |
| commit | 3fda16078b9979be836df0d156ca0dc0a0778f91 (patch) | |
| tree | 8a91413adcd9a24e16fbfc0cfadede97d38916d2 /target/linux/ath79/Makefile | |
| parent | 080a769b4da8dfad8485d82ff94f5e844e561696 (diff) | |
| download | upstream-3fda16078b9979be836df0d156ca0dc0a0778f91.tar.gz upstream-3fda16078b9979be836df0d156ca0dc0a0778f91.tar.bz2 upstream-3fda16078b9979be836df0d156ca0dc0a0778f91.zip | |
qoriq: add support for WatchGuard Firebox M300
This device is based on NXP's QorIQ T2081QDS board, with a quad-core
dual-threaded 1.5 GHz ppc64 CPU and 4GB ECC RAM. The board has 5
ethernet interfaces, of which 3 are connected to the ethernet ports on
the front panel. The other 2 are internally connected to a Marvell
88E6171 switch; the other 5 ports of this switch are also connected to
the ethernet ports on the front panel.
Installation: write the sdcard image to an SD card. Stock U-Boot will
not boot, wait for it to fail then run these commands:
setenv OpenWrt_fdt image-watchguard-firebox-m300.dtb
setenv OpenWrt_kernel watchguard_firebox-m300-kernel.bin
setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; ext2load mmc 0:1 $fdtaddr $OpenWrt_fdt; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr - $fdtaddr'
saveenv
reset
The default U-Boot boot entry will now boot OpenWrt from the SD card.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: Rui Salvaterra <rsalvaterra@gmail.com>
Diffstat (limited to 'target/linux/ath79/Makefile')
0 files changed, 0 insertions, 0 deletions