diff options
author | Rui Salvaterra <rsalvaterra@gmail.com> | 2022-02-10 13:35:32 +0000 |
---|---|---|
committer | Paul Spooren <mail@aparcar.org> | 2022-02-17 11:08:58 +0100 |
commit | 961175a8015d348009ca2189dacbe412925a6d33 (patch) | |
tree | 04ec120a1f600850822e37f0718022d2c40dd8aa /target/linux/ath25 | |
parent | 918d4ab41ea34358c747aab5471bbb0a2a786dd8 (diff) | |
download | upstream-961175a8015d348009ca2189dacbe412925a6d33.tar.gz upstream-961175a8015d348009ca2189dacbe412925a6d33.tar.bz2 upstream-961175a8015d348009ca2189dacbe412925a6d33.zip |
ath25: drop Linux 5.4 support
We've been bumped to 5.10, no need to carry this stuff anymore.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Diffstat (limited to 'target/linux/ath25')
-rw-r--r-- | target/linux/ath25/config-5.4 | 127 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/107-ar5312_gpio.patch | 212 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/108-ar2315_gpio.patch | 363 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch | 1736 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/120-spiflash.patch | 631 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/130-watchdog.patch | 277 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch | 60 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch | 44 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch | 72 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/210-reset_button.patch | 71 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch | 111 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/330-board_leds.patch | 116 | ||||
-rw-r--r-- | target/linux/ath25/patches-5.4/700-swconfig_mvswitch.patch | 23 |
13 files changed, 0 insertions, 3843 deletions
diff --git a/target/linux/ath25/config-5.4 b/target/linux/ath25/config-5.4 deleted file mode 100644 index 10b81f0e03..0000000000 --- a/target/linux/ath25/config-5.4 +++ /dev/null @@ -1,127 +0,0 @@ -CONFIG_ADM6996_PHY=y -CONFIG_AR2315_WDT=y -CONFIG_AR8216_PHY=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ATH25=y -CONFIG_BLK_MQ_PCI=y -CONFIG_CEVT_R4K=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_LOAD_STORE_LR=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y -CONFIG_EARLY_PRINTK=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_FORCE_PCI=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_AR2315=y -CONFIG_GPIO_AR5312=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HW_RANDOM=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IP17XX_PHY=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -CONFIG_LEDS_GPIO=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y -CONFIG_MIPS_EBPF_JIT=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_AR2315=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MVSWITCH_PHY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_AR231X=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -# CONFIG_OF is not set -CONFIG_PCI=y -CONFIG_PCI_AR2315=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DRIVERS_LEGACY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SOC_AR2315=y -CONFIG_SOC_AR5312=y -CONFIG_SRCU=y -# CONFIG_SWAP is not set -CONFIG_SWCONFIG=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_TARGET_ISA_REV=1 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TINY_SRCU=y -CONFIG_USB_SUPPORT=y diff --git a/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch b/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch deleted file mode 100644 index 321ebc7fb8..0000000000 --- a/target/linux/ath25/patches-5.4/107-ar5312_gpio.patch +++ /dev/null @@ -1,212 +0,0 @@ ---- a/arch/mips/ath25/Kconfig -+++ b/arch/mips/ath25/Kconfig -@@ -2,6 +2,7 @@ - config SOC_AR5312 - bool "Atheros AR5312/AR2312+ SoC support" - depends on ATH25 -+ select GPIO_AR5312 - default y - - config SOC_AR2315 ---- a/arch/mips/ath25/ar5312.c -+++ b/arch/mips/ath25/ar5312.c -@@ -22,6 +22,7 @@ - #include <linux/platform_device.h> - #include <linux/mtd/physmap.h> - #include <linux/reboot.h> -+#include <linux/gpio.h> - #include <asm/bootinfo.h> - #include <asm/reboot.h> - #include <asm/time.h> -@@ -180,6 +181,22 @@ static struct platform_device ar5312_phy - .num_resources = 1, - }; - -+static struct resource ar5312_gpio_res[] = { -+ { -+ .name = "ar5312-gpio", -+ .flags = IORESOURCE_MEM, -+ .start = AR5312_GPIO_BASE, -+ .end = AR5312_GPIO_BASE + AR5312_GPIO_SIZE - 1, -+ }, -+}; -+ -+static struct platform_device ar5312_gpio = { -+ .name = "ar5312-gpio", -+ .id = -1, -+ .resource = ar5312_gpio_res, -+ .num_resources = ARRAY_SIZE(ar5312_gpio_res), -+}; -+ - static void __init ar5312_flash_init(void) - { - void __iomem *flashctl_base; -@@ -247,6 +264,8 @@ void __init ar5312_init_devices(void) - - platform_device_register(&ar5312_physmap_flash); - -+ platform_device_register(&ar5312_gpio); -+ - switch (ath25_soc) { - case ATH25_SOC_AR5312: - if (!ath25_board.radio) ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -113,6 +113,13 @@ config GPIO_AMDPT - driver for GPIO functionality on Promontory IOHub - Require ACPI ASL code to enumerate as a platform device. - -+config GPIO_AR5312 -+ bool "AR5312 SoC GPIO support" -+ default y if SOC_AR5312 -+ depends on SOC_AR5312 -+ help -+ Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs. -+ - config GPIO_ASPEED - tristate "Aspeed GPIO support" - depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alt - obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o - obj-$(CONFIG_GPIO_AMD_FCH) += gpio-amd-fch.o - obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o -+obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o - obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o - obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o - obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o ---- /dev/null -+++ b/drivers/gpio/gpio-ar5312.c -@@ -0,0 +1,121 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name> -+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/gpio.h> -+ -+#define DRIVER_NAME "ar5312-gpio" -+ -+#define AR5312_GPIO_DO 0x00 /* output register */ -+#define AR5312_GPIO_DI 0x04 /* intput register */ -+#define AR5312_GPIO_CR 0x08 /* control register */ -+ -+#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -+#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */ -+#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */ -+#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ -+#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ -+ -+#define AR5312_GPIO_NUM 8 -+ -+static void __iomem *ar5312_mem; -+ -+static inline u32 ar5312_gpio_reg_read(unsigned reg) -+{ -+ return __raw_readl(ar5312_mem + reg); -+} -+ -+static inline void ar5312_gpio_reg_write(unsigned reg, u32 val) -+{ -+ __raw_writel(val, ar5312_mem + reg); -+} -+ -+static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val) -+{ -+ ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val); -+} -+ -+static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio) -+{ -+ return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1; -+} -+ -+static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val) -+{ -+ u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO); -+ -+ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio); -+ ar5312_gpio_reg_write(AR5312_GPIO_DO, reg); -+} -+ -+static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio) -+{ -+ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio); -+ return 0; -+} -+ -+static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val) -+{ -+ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0); -+ ar5312_gpio_set_val(chip, gpio, val); -+ return 0; -+} -+ -+static struct gpio_chip ar5312_gpio_chip = { -+ .label = DRIVER_NAME, -+ .direction_input = ar5312_gpio_dir_in, -+ .direction_output = ar5312_gpio_dir_out, -+ .set = ar5312_gpio_set_val, -+ .get = ar5312_gpio_get_val, -+ .base = 0, -+ .ngpio = AR5312_GPIO_NUM, -+}; -+ -+static int ar5312_gpio_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ int ret; -+ -+ if (ar5312_mem) -+ return -EBUSY; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ ar5312_mem = devm_ioremap_resource(dev, res); -+ if (IS_ERR(ar5312_mem)) -+ return PTR_ERR(ar5312_mem); -+ -+ ar5312_gpio_chip.parent = dev; -+ ret = gpiochip_add(&ar5312_gpio_chip); -+ if (ret) { -+ dev_err(dev, "failed to add gpiochip\n"); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static struct platform_driver ar5312_gpio_driver = { -+ .probe = ar5312_gpio_probe, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ } -+}; -+ -+static int __init ar5312_gpio_init(void) -+{ -+ return platform_driver_register(&ar5312_gpio_driver); -+} -+subsys_initcall(ar5312_gpio_init); ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -192,6 +192,7 @@ config ATH25 - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT -+ select GPIOLIB - select IRQ_MIPS_CPU - select IRQ_DOMAIN - select SYS_HAS_CPU_MIPS32_R1 diff --git a/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch b/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch deleted file mode 100644 index e198cecf15..0000000000 --- a/target/linux/ath25/patches-5.4/108-ar2315_gpio.patch +++ /dev/null @@ -1,363 +0,0 @@ ---- a/arch/mips/ath25/Kconfig -+++ b/arch/mips/ath25/Kconfig -@@ -8,6 +8,7 @@ config SOC_AR5312 - config SOC_AR2315 - bool "Atheros AR2315+ SoC support" - depends on ATH25 -+ select GPIO_AR2315 - default y - - config PCI_AR2315 ---- a/arch/mips/ath25/ar2315.c -+++ b/arch/mips/ath25/ar2315.c -@@ -21,6 +21,8 @@ - #include <linux/interrupt.h> - #include <linux/platform_device.h> - #include <linux/reboot.h> -+#include <linux/delay.h> -+#include <linux/gpio.h> - #include <asm/bootinfo.h> - #include <asm/reboot.h> - #include <asm/time.h> -@@ -167,11 +169,42 @@ void __init ar2315_arch_init_irq(void) - ar2315_misc_irq_domain = domain; - } - -+static struct resource ar2315_gpio_res[] = { -+ { -+ .name = "ar2315-gpio", -+ .flags = IORESOURCE_MEM, -+ .start = AR2315_RST_BASE + AR2315_GPIO, -+ .end = AR2315_RST_BASE + AR2315_GPIO + 0x10 - 1, -+ }, -+ { -+ .name = "ar2315-gpio", -+ .flags = IORESOURCE_IRQ, -+ }, -+ { -+ .name = "ar2315-gpio-irq-base", -+ .flags = IORESOURCE_IRQ, -+ .start = AR231X_GPIO_IRQ_BASE, -+ .end = AR231X_GPIO_IRQ_BASE, -+ } -+}; -+ -+static struct platform_device ar2315_gpio = { -+ .id = -1, -+ .name = "ar2315-gpio", -+ .resource = ar2315_gpio_res, -+ .num_resources = ARRAY_SIZE(ar2315_gpio_res) -+}; -+ - void __init ar2315_init_devices(void) - { - /* Find board configuration */ - ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE); - -+ ar2315_gpio_res[1].start = irq_create_mapping(ar2315_misc_irq_domain, -+ AR2315_MISC_IRQ_GPIO); -+ ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; -+ platform_device_register(&ar2315_gpio); -+ - ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0); - } - -@@ -187,8 +220,8 @@ static void ar2315_restart(char *command - /* Cold reset does not work on the AR2315/6, use the GPIO reset bits - * a workaround. Give it some time to attempt a gpio based hardware - * reset (atheros reference design workaround) */ -- -- /* TODO: implement the GPIO reset workaround */ -+ gpio_request_one(AR2315_RESET_GPIO, GPIOF_OUT_INIT_LOW, "Reset"); -+ mdelay(100); - - /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic - * workaround. Attempt to jump to the mips reset location - ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -113,6 +113,13 @@ config GPIO_AMDPT - driver for GPIO functionality on Promontory IOHub - Require ACPI ASL code to enumerate as a platform device. - -+config GPIO_AR2315 -+ bool "AR2315 SoC GPIO support" -+ default y if SOC_AR2315 -+ depends on SOC_AR2315 -+ help -+ Say yes here to enable GPIO support for Atheros AR2315+ SoCs. -+ - config GPIO_AR5312 - bool "AR5312 SoC GPIO support" - default y if SOC_AR5312 ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ALTERA) += gpio-alt - obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o - obj-$(CONFIG_GPIO_AMD_FCH) += gpio-amd-fch.o - obj-$(CONFIG_GPIO_AMDPT) += gpio-amdpt.o -+obj-$(CONFIG_GPIO_AR2315) += gpio-ar2315.o - obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o - obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o - obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o ---- /dev/null -+++ b/drivers/gpio/gpio-ar2315.c -@@ -0,0 +1,233 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006 Felix Fietkau <nbd@nbd.name> -+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/gpio.h> -+#include <linux/irq.h> -+ -+#define DRIVER_NAME "ar2315-gpio" -+ -+#define AR2315_GPIO_DI 0x0000 -+#define AR2315_GPIO_DO 0x0008 -+#define AR2315_GPIO_DIR 0x0010 -+#define AR2315_GPIO_INT 0x0018 -+ -+#define AR2315_GPIO_DIR_M(x) (1 << (x)) /* mask for i/o */ -+#define AR2315_GPIO_DIR_O(x) (1 << (x)) /* output */ -+#define AR2315_GPIO_DIR_I(x) (0) /* input */ -+ -+#define AR2315_GPIO_INT_NUM_M 0x3F /* mask for GPIO num */ -+#define AR2315_GPIO_INT_TRIG(x) ((x) << 6) /* interrupt trigger */ -+#define AR2315_GPIO_INT_TRIG_M (0x3 << 6) /* mask for int trig */ -+ -+#define AR2315_GPIO_INT_TRIG_OFF 0 /* Triggerring off */ -+#define AR2315_GPIO_INT_TRIG_LOW 1 /* Low Level Triggered */ -+#define AR2315_GPIO_INT_TRIG_HIGH 2 /* High Level Triggered */ -+#define AR2315_GPIO_INT_TRIG_EDGE 3 /* Edge Triggered */ -+ -+#define AR2315_GPIO_NUM 22 -+ -+static u32 ar2315_gpio_intmask; -+static u32 ar2315_gpio_intval; -+static unsigned ar2315_gpio_irq_base; -+static void __iomem *ar2315_mem; -+ -+static inline u32 ar2315_gpio_reg_read(unsigned reg) -+{ -+ return __raw_readl(ar2315_mem + reg); -+} -+ -+static inline void ar2315_gpio_reg_write(unsigned reg, u32 val) -+{ -+ __raw_writel(val, ar2315_mem + reg); -+} -+ -+static inline void ar2315_gpio_reg_mask(unsigned reg, u32 mask, u32 val) -+{ -+ ar2315_gpio_reg_write(reg, (ar2315_gpio_reg_read(reg) & ~mask) | val); -+} -+ -+static void ar2315_gpio_irq_handler(struct irq_desc *desc) -+{ -+ u32 pend; -+ int bit = -1; -+ -+ /* only do one gpio interrupt at a time */ -+ pend = ar2315_gpio_reg_read(AR2315_GPIO_DI); -+ pend ^= ar2315_gpio_intval; -+ pend &= ar2315_gpio_intmask; -+ -+ if (pend) { -+ bit = fls(pend) - 1; -+ pend &= ~(1 << bit); -+ ar2315_gpio_intval ^= (1 << bit); -+ } -+ -+ /* Enable interrupt with edge detection */ -+ if ((ar2315_gpio_reg_read(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(bit)) != -+ AR2315_GPIO_DIR_I(bit)) -+ return; -+ -+ if (bit >= 0) -+ generic_handle_irq(ar2315_gpio_irq_base + bit); -+} -+ -+static void ar2315_gpio_int_setup(unsigned gpio, int trig) -+{ -+ u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_INT); -+ -+ reg &= ~(AR2315_GPIO_INT_NUM_M | AR2315_GPIO_INT_TRIG_M); -+ reg |= gpio | AR2315_GPIO_INT_TRIG(trig); -+ ar2315_gpio_reg_write(AR2315_GPIO_INT, reg); -+} -+ -+static void ar2315_gpio_irq_unmask(struct irq_data *d) -+{ -+ unsigned gpio = d->irq - ar2315_gpio_irq_base; -+ u32 dir = ar2315_gpio_reg_read(AR2315_GPIO_DIR); -+ -+ /* Enable interrupt with edge detection */ -+ if ((dir & AR2315_GPIO_DIR_M(gpio)) != AR2315_GPIO_DIR_I(gpio)) -+ return; -+ -+ ar2315_gpio_intmask |= (1 << gpio); -+ ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_EDGE); -+} -+ -+static void ar2315_gpio_irq_mask(struct irq_data *d) -+{ -+ unsigned gpio = d->irq - ar2315_gpio_irq_base; -+ -+ /* Disable interrupt */ -+ ar2315_gpio_intmask &= ~(1 << gpio); -+ ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_OFF); -+} -+ -+static struct irq_chip ar2315_gpio_irq_chip = { -+ .name = DRIVER_NAME, -+ .irq_unmask = ar2315_gpio_irq_unmask, -+ .irq_mask = ar2315_gpio_irq_mask, -+}; -+ -+static void ar2315_gpio_irq_init(unsigned irq) -+{ -+ unsigned i; -+ -+ ar2315_gpio_intval = ar2315_gpio_reg_read(AR2315_GPIO_DI); -+ for (i = 0; i < AR2315_GPIO_NUM; i++) { -+ unsigned _irq = ar2315_gpio_irq_base + i; -+ -+ irq_set_chip_and_handler(_irq, &ar2315_gpio_irq_chip, -+ handle_level_irq); -+ } -+ irq_set_chained_handler(irq, ar2315_gpio_irq_handler); -+} -+ -+static int ar2315_gpio_get_val(struct gpio_chip *chip, unsigned gpio) -+{ -+ return (ar2315_gpio_reg_read(AR2315_GPIO_DI) >> gpio) & 1; -+} -+ -+static void ar2315_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val) -+{ -+ u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_DO); -+ -+ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio); -+ ar2315_gpio_reg_write(AR2315_GPIO_DO, reg); -+} -+ -+static int ar2315_gpio_dir_in(struct gpio_chip *chip, unsigned gpio) -+{ -+ ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 1 << gpio, 0); -+ return 0; -+} -+ -+static int ar2315_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val) -+{ -+ ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 0, 1 << gpio); -+ ar2315_gpio_set_val(chip, gpio, val); -+ return 0; -+} -+ -+static int ar2315_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) -+{ -+ return ar2315_gpio_irq_base + gpio; -+} -+ -+static struct gpio_chip ar2315_gpio_chip = { -+ .label = DRIVER_NAME, -+ .direction_input = ar2315_gpio_dir_in, -+ .direction_output = ar2315_gpio_dir_out, -+ .set = ar2315_gpio_set_val, -+ .get = ar2315_gpio_get_val, -+ .to_irq = ar2315_gpio_to_irq, -+ .base = 0, -+ .ngpio = AR2315_GPIO_NUM, -+}; -+ -+static int ar2315_gpio_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct resource *res; -+ unsigned irq; -+ int ret; -+ -+ if (ar2315_mem) -+ return -EBUSY; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, -+ "ar2315-gpio-irq-base"); -+ if (!res) { -+ dev_err(dev, "not found GPIO IRQ base\n"); -+ return -ENXIO; -+ } -+ ar2315_gpio_irq_base = res->start; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, DRIVER_NAME); -+ if (!res) { -+ dev_err(dev, "not found IRQ number\n"); -+ return -ENXIO; -+ } -+ irq = res->start; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, DRIVER_NAME); -+ ar2315_mem = devm_ioremap_resource(dev, res); -+ if (IS_ERR(ar2315_mem)) -+ return PTR_ERR(ar2315_mem); -+ -+ ar2315_gpio_chip.parent = dev; -+ ret = gpiochip_add(&ar2315_gpio_chip); -+ if (ret) { -+ dev_err(dev, "failed to add gpiochip\n"); -+ return ret; -+ } -+ -+ ar2315_gpio_irq_init(irq); -+ -+ return 0; -+} -+ -+static struct platform_driver ar2315_gpio_driver = { -+ .probe = ar2315_gpio_probe, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ } -+}; -+ -+static int __init ar2315_gpio_init(void) -+{ -+ return platform_driver_register(&ar2315_gpio_driver); -+} -+subsys_initcall(ar2315_gpio_init); ---- a/arch/mips/ath25/devices.h -+++ b/arch/mips/ath25/devices.h -@@ -4,6 +4,11 @@ - - #include <linux/cpu.h> - -+#define AR231X_GPIO_IRQ_BASE 0x30 -+ -+/* GPIO number for AR2315/16 reset issue workaround */ -+#define AR2315_RESET_GPIO 5 -+ - #define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S) - - #define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */ ---- a/arch/mips/ath25/ar2315_regs.h -+++ b/arch/mips/ath25/ar2315_regs.h -@@ -315,6 +315,9 @@ - #define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018 - #define AR2315_MEM_CFG_BANKADDR_BITS_S 3 - -+/* GPIO MMR base address */ -+#define AR2315_GPIO 0x0088 -+ - /* - * Local Bus Interface Registers - */ diff --git a/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch b/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch deleted file mode 100644 index 57c18abf69..0000000000 --- a/target/linux/ath25/patches-5.4/110-ar2313_ethernet.patch +++ /dev/null @@ -1,1736 +0,0 @@ ---- a/drivers/net/ethernet/atheros/Makefile -+++ b/drivers/net/ethernet/atheros/Makefile -@@ -9,3 +9,4 @@ obj-$(CONFIG_ATL2) += atlx/ - obj-$(CONFIG_ATL1E) += atl1e/ - obj-$(CONFIG_ATL1C) += atl1c/ - obj-$(CONFIG_ALX) += alx/ -+obj-$(CONFIG_NET_AR231X) += ar231x/ ---- a/drivers/net/ethernet/atheros/Kconfig -+++ b/drivers/net/ethernet/atheros/Kconfig -@@ -6,7 +6,7 @@ - config NET_VENDOR_ATHEROS - bool "Atheros devices" - default y -- depends on (PCI || ATH79) -+ depends on (PCI || ATH25 || ATH79) - ---help--- - If you have a network (Ethernet) card belonging to this class, say Y. - -@@ -87,4 +87,10 @@ config ALX - To compile this driver as a module, choose M here. The module - will be called alx. - -+config NET_AR231X -+ tristate "Atheros AR231X built-in Ethernet support" -+ depends on ATH25 -+ help -+ Support for the AR231x/531x ethernet controller -+ - endif # NET_VENDOR_ATHEROS ---- /dev/null -+++ b/drivers/net/ethernet/atheros/ar231x/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_NET_AR231X) += ar231x.o ---- /dev/null -+++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c -@@ -0,0 +1,1120 @@ -+/* -+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device. -+ * -+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com> -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name> -+ * -+ * Thanks to Atheros for providing hardware and documentation -+ * enabling me to write this driver. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * Additional credits: -+ * This code is taken from John Taylor's Sibyte driver and then -+ * modified for the AR2313. -+ */ -+ -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/interrupt.h> -+#include <linux/skbuff.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/mm.h> -+#include <linux/mii.h> -+#include <linux/phy.h> -+#include <linux/platform_device.h> -+#include <linux/io.h> -+ -+#define AR2313_MTU 1692 -+#define AR2313_PRIOS 1 -+#define AR2313_QUEUES (2*AR2313_PRIOS) -+#define AR2313_DESCR_ENTRIES 64 -+ -+#ifndef min -+#define min(a, b) (((a) < (b)) ? (a) : (b)) -+#endif -+ -+#ifndef SMP_CACHE_BYTES -+#define SMP_CACHE_BYTES L1_CACHE_BYTES -+#endif -+ -+#define AR2313_MBOX_SET_BIT 0x8 -+ -+#include "ar231x.h" -+ -+/** -+ * New interrupt handler strategy: -+ * -+ * An old interrupt handler worked using the traditional method of -+ * replacing an skbuff with a new one when a packet arrives. However -+ * the rx rings do not need to contain a static number of buffer -+ * descriptors, thus it makes sense to move the memory allocation out -+ * of the main interrupt handler and do it in a bottom half handler -+ * and only allocate new buffers when the number of buffers in the -+ * ring is below a certain threshold. In order to avoid starving the -+ * NIC under heavy load it is however necessary to force allocation -+ * when hitting a minimum threshold. The strategy for alloction is as -+ * follows: -+ * -+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half -+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate -+ * the buffers in the interrupt handler -+ * RX_RING_THRES - maximum number of buffers in the rx ring -+ * -+ * One advantagous side effect of this allocation approach is that the -+ * entire rx processing can be done without holding any spin lock -+ * since the rx rings and registers are totally independent of the tx -+ * ring and its registers. This of course includes the kmalloc's of -+ * new skb's. Thus start_xmit can run in parallel with rx processing -+ * and the memory allocation on SMP systems. -+ * -+ * Note that running the skb reallocation in a bottom half opens up -+ * another can of races which needs to be handled properly. In -+ * particular it can happen that the interrupt handler tries to run -+ * the reallocation while the bottom half is either running on another -+ * CPU or was interrupted on the same CPU. To get around this the -+ * driver uses bitops to prevent the reallocation routines from being -+ * reentered. -+ * -+ * TX handling can also be done without holding any spin lock, wheee -+ * this is fun! since tx_csm is only written to by the interrupt -+ * handler. -+ */ -+ -+/** -+ * Threshold values for RX buffer allocation - the low water marks for -+ * when to start refilling the rings are set to 75% of the ring -+ * sizes. It seems to make sense to refill the rings entirely from the -+ * intrrupt handler once it gets below the panic threshold, that way -+ * we don't risk that the refilling is moved to another CPU when the -+ * one running the interrupt handler just got the slab code hot in its -+ * cache. -+ */ -+#define RX_RING_SIZE AR2313_DESCR_ENTRIES -+#define RX_PANIC_THRES (RX_RING_SIZE/4) -+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4) -+#define CRC_LEN 4 -+#define RX_OFFSET 2 -+ -+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) -+#define VLAN_HDR 4 -+#else -+#define VLAN_HDR 0 -+#endif -+ -+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + \ -+ RX_OFFSET) -+ -+#ifdef MODULE -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@nbd.name>"); -+MODULE_DESCRIPTION("AR231x Ethernet driver"); -+#endif -+ -+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff) -+ -+/* prototypes */ -+static void ar231x_halt(struct net_device *dev); -+static void rx_tasklet_func(unsigned long data); -+static void rx_tasklet_cleanup(struct net_device *dev); -+static void ar231x_multicast_list(struct net_device *dev); -+static void ar231x_tx_timeout(struct net_device *dev); -+ -+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); -+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, -+ u16 value); -+static int ar231x_mdiobus_reset(struct mii_bus *bus); -+static int ar231x_mdiobus_probe(struct net_device *dev); -+static void ar231x_adjust_link(struct net_device *dev); -+ -+#ifndef ERR -+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) -+#endif -+ -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void -+ar231x_netpoll(struct net_device *dev) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ ar231x_interrupt(dev->irq, dev); -+ local_irq_restore(flags); -+} -+#endif -+ -+static const struct net_device_ops ar231x_ops = { -+ .ndo_open = ar231x_open, -+ .ndo_stop = ar231x_close, -+ .ndo_start_xmit = ar231x_start_xmit, -+ .ndo_set_rx_mode = ar231x_multicast_list, -+ .ndo_do_ioctl = ar231x_ioctl, -+ .ndo_change_mtu = eth_change_mtu, -+ .ndo_validate_addr = eth_validate_addr, -+ .ndo_set_mac_address = eth_mac_addr, -+ .ndo_tx_timeout = ar231x_tx_timeout, -+#ifdef CONFIG_NET_POLL_CONTROLLER -+ .ndo_poll_controller = ar231x_netpoll, -+#endif -+}; -+ -+static int ar231x_probe(struct platform_device *pdev) -+{ -+ struct net_device *dev; -+ struct ar231x_private *sp; -+ struct resource *res; -+ unsigned long ar_eth_base; -+ char buf[64]; -+ -+ dev = alloc_etherdev(sizeof(struct ar231x_private)); -+ -+ if (dev == NULL) { -+ printk(KERN_ERR -+ "ar231x: Unable to allocate net_device structure!\n"); -+ return -ENOMEM; -+ } -+ -+ platform_set_drvdata(pdev, dev); -+ -+ SET_NETDEV_DEV(dev, &pdev->dev); -+ -+ sp = netdev_priv(dev); -+ sp->dev = dev; -+ sp->pdev = pdev; -+ sp->cfg = pdev->dev.platform_data; -+ -+ sprintf(buf, "eth%d_membase", pdev->id); -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf); -+ if (!res) -+ return -ENODEV; -+ -+ sp->link = 0; -+ ar_eth_base = res->start; -+ -+ sprintf(buf, "eth%d_irq", pdev->id); -+ dev->irq = platform_get_irq_byname(pdev, buf); -+ -+ spin_lock_init(&sp->lock); -+ -+ dev->features |= NETIF_F_HIGHDMA; -+ dev->netdev_ops = &ar231x_ops; -+ -+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long)dev); -+ tasklet_disable(&sp->rx_tasklet); -+ -+ sp->eth_regs = ioremap_nocache(ar_eth_base, sizeof(*sp->eth_regs)); -+ if (!sp->eth_regs) { -+ printk("Can't remap eth registers\n"); -+ return -ENXIO; -+ } -+ -+ /** -+ * When there's only one MAC, PHY regs are typically on ENET0, -+ * even though the MAC might be on ENET1. -+ * So remap PHY regs separately. -+ */ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eth0_mii"); -+ if (!res) { -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, -+ "eth1_mii"); -+ if (!res) -+ return -ENODEV; -+ } -+ sp->phy_regs = ioremap_nocache(res->start, resource_size(res)); -+ if (!sp->phy_regs) { -+ printk("Can't remap phy registers\n"); -+ return -ENXIO; -+ } -+ -+ sp->dma_regs = ioremap_nocache(ar_eth_base + 0x1000, -+ sizeof(*sp->dma_regs)); -+ if (!sp->dma_regs) { -+ printk("Can't remap DMA registers\n"); -+ return -ENXIO; -+ } -+ dev->base_addr = ar_eth_base + 0x1000; -+ -+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1); -+ sp->name[sizeof(sp->name) - 1] = '\0'; -+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6); -+ -+ if (ar231x_init(dev)) { -+ /* ar231x_init() calls ar231x_init_cleanup() on error */ -+ kfree(dev); -+ return -ENODEV; -+ } -+ -+ if (register_netdev(dev)) { -+ printk("%s: register_netdev failed\n", __func__); -+ return -1; -+ } -+ -+ printk("%s: %s: %pM, irq %d\n", dev->name, sp->name, dev->dev_addr, -+ dev->irq); -+ -+ sp->mii_bus = mdiobus_alloc(); -+ if (sp->mii_bus == NULL) -+ return -1; -+ -+ sp->mii_bus->priv = dev; -+ sp->mii_bus->read = ar231x_mdiobus_read; -+ sp->mii_bus->write = ar231x_mdiobus_write; -+ sp->mii_bus->reset = ar231x_mdiobus_reset; -+ sp->mii_bus->name = "ar231x_eth_mii"; -+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id); -+ -+ mdiobus_register(sp->mii_bus); -+ -+ if (ar231x_mdiobus_probe(dev) != 0) { -+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name); -+ rx_tasklet_cleanup(dev); -+ ar231x_init_cleanup(dev); -+ unregister_netdev(dev); -+ kfree(dev); -+ return -ENODEV; -+ } -+ -+ return 0; -+} -+ -+static void ar231x_multicast_list(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int filter; -+ -+ filter = sp->eth_regs->mac_control; -+ -+ if (dev->flags & IFF_PROMISC) -+ filter |= MAC_CONTROL_PR; -+ else -+ filter &= ~MAC_CONTROL_PR; -+ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0)) -+ filter |= MAC_CONTROL_PM; -+ else -+ filter &= ~MAC_CONTROL_PM; -+ -+ sp->eth_regs->mac_control = filter; -+} -+ -+static void rx_tasklet_cleanup(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ /** -+ * Tasklet may be scheduled. Need to get it removed from the list -+ * since we're about to free the struct. -+ */ -+ -+ sp->unloading = 1; -+ tasklet_enable(&sp->rx_tasklet); -+ tasklet_kill(&sp->rx_tasklet); -+} -+ -+static int ar231x_remove(struct platform_device *pdev) -+{ -+ struct net_device *dev = platform_get_drvdata(pdev); -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ rx_tasklet_cleanup(dev); -+ ar231x_init_cleanup(dev); -+ unregister_netdev(dev); -+ mdiobus_unregister(sp->mii_bus); -+ mdiobus_free(sp->mii_bus); -+ kfree(dev); -+ return 0; -+} -+ -+/** -+ * Restart the AR2313 ethernet controller. -+ */ -+static int ar231x_restart(struct net_device *dev) -+{ -+ /* disable interrupts */ -+ disable_irq(dev->irq); -+ -+ /* stop mac */ -+ ar231x_halt(dev); -+ -+ /* initialize */ -+ ar231x_init(dev); -+ -+ /* enable interrupts */ -+ enable_irq(dev->irq); -+ -+ return 0; -+} -+ -+static struct platform_driver ar231x_driver = { -+ .driver.name = "ar231x-eth", -+ .probe = ar231x_probe, -+ .remove = ar231x_remove, -+}; -+ -+module_platform_driver(ar231x_driver); -+ -+static void ar231x_free_descriptors(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ if (sp->rx_ring != NULL) { -+ kfree((void *)KSEG0ADDR(sp->rx_ring)); -+ sp->rx_ring = NULL; -+ sp->tx_ring = NULL; -+ } -+} -+ -+static int ar231x_allocate_descriptors(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ int size; -+ int j; -+ ar231x_descr_t *space; -+ -+ if (sp->rx_ring != NULL) { -+ printk("%s: already done.\n", __func__); -+ return 0; -+ } -+ -+ size = sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES); -+ space = kmalloc(size, GFP_KERNEL); -+ if (space == NULL) -+ return 1; -+ -+ /* invalidate caches */ -+ dma_cache_inv((unsigned int)space, size); -+ -+ /* now convert pointer to KSEG1 */ -+ space = (ar231x_descr_t *)KSEG1ADDR(space); -+ -+ memset((void *)space, 0, size); -+ -+ sp->rx_ring = space; -+ space += AR2313_DESCR_ENTRIES; -+ -+ sp->tx_ring = space; -+ space += AR2313_DESCR_ENTRIES; -+ -+ /* Initialize the transmit Descriptors */ -+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { -+ ar231x_descr_t *td = &sp->tx_ring[j]; -+ -+ td->status = 0; -+ td->devcs = DMA_TX1_CHAINED; -+ td->addr = 0; -+ td->descr = virt_to_phys(&sp->tx_ring[DSC_NEXT(j)]); -+ } -+ -+ return 0; -+} -+ -+/** -+ * Generic cleanup handling data allocated during init. Used when the -+ * module is unloaded or if an error occurs during initialization -+ */ -+static void ar231x_init_cleanup(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ struct sk_buff *skb; -+ int j; -+ -+ ar231x_free_descriptors(dev); -+ -+ if (sp->eth_regs) -+ iounmap((void *)sp->eth_regs); -+ if (sp->dma_regs) -+ iounmap((void *)sp->dma_regs); -+ if (sp->phy_regs) -+ iounmap((void *)sp->phy_regs); -+ -+ if (sp->rx_skb) { -+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { -+ skb = sp->rx_skb[j]; -+ if (skb) { -+ sp->rx_skb[j] = NULL; -+ dev_kfree_skb(skb); -+ } -+ } -+ kfree(sp->rx_skb); -+ sp->rx_skb = NULL; -+ } -+ -+ if (sp->tx_skb) { -+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { -+ skb = sp->tx_skb[j]; -+ if (skb) { -+ sp->tx_skb[j] = NULL; -+ dev_kfree_skb(skb); -+ } -+ } -+ kfree(sp->tx_skb); -+ sp->tx_skb = NULL; -+ } -+} -+ -+static int ar231x_reset_reg(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int ethsal, ethsah; -+ unsigned int flags; -+ -+ sp->cfg->reset_set(sp->cfg->reset_mac); -+ mdelay(10); -+ sp->cfg->reset_clear(sp->cfg->reset_mac); -+ mdelay(10); -+ sp->cfg->reset_set(sp->cfg->reset_phy); -+ mdelay(10); -+ sp->cfg->reset_clear(sp->cfg->reset_phy); -+ mdelay(10); -+ -+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR); -+ mdelay(10); -+ sp->dma_regs->bus_mode = -+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE); -+ -+ /* enable interrupts */ -+ sp->dma_regs->intr_ena = DMA_STATUS_AIS | DMA_STATUS_NIS | -+ DMA_STATUS_RI | DMA_STATUS_TI | -+ DMA_STATUS_FBE; -+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring); -+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring); -+ sp->dma_regs->control = -+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF); -+ -+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE); -+ sp->eth_regs->vlan_tag = (0x8100); -+ -+ /* Enable Ethernet Interface */ -+ flags = (MAC_CONTROL_TE | /* transmit enable */ -+ MAC_CONTROL_PM | /* pass mcast */ -+ MAC_CONTROL_F | /* full duplex */ -+ MAC_CONTROL_HBD); /* heart beat disabled */ -+ -+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ -+ flags |= MAC_CONTROL_PR; -+ } -+ sp->eth_regs->mac_control = flags; -+ -+ /* Set all Ethernet station address registers to their initial values */ -+ ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | -+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF); -+ -+ ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | -+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | -+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | -+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF); -+ -+ sp->eth_regs->mac_addr[0] = ethsah; -+ sp->eth_regs->mac_addr[1] = ethsal; -+ -+ mdelay(10); -+ -+ return 0; -+} -+ -+static int ar231x_init(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ int ecode = 0; -+ -+ /* Allocate descriptors */ -+ if (ar231x_allocate_descriptors(dev)) { -+ printk("%s: %s: ar231x_allocate_descriptors failed\n", -+ dev->name, __func__); -+ ecode = -EAGAIN; -+ goto init_error; -+ } -+ -+ /* Get the memory for the skb rings */ -+ if (sp->rx_skb == NULL) { -+ sp->rx_skb = -+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, -+ GFP_KERNEL); -+ if (!(sp->rx_skb)) { -+ printk("%s: %s: rx_skb kmalloc failed\n", -+ dev->name, __func__); -+ ecode = -EAGAIN; -+ goto init_error; -+ } -+ } -+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); -+ -+ if (sp->tx_skb == NULL) { -+ sp->tx_skb = -+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, -+ GFP_KERNEL); -+ if (!(sp->tx_skb)) { -+ printk("%s: %s: tx_skb kmalloc failed\n", -+ dev->name, __func__); -+ ecode = -EAGAIN; -+ goto init_error; -+ } -+ } -+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); -+ -+ /** -+ * Set tx_csm before we start receiving interrupts, otherwise -+ * the interrupt handler might think it is supposed to process -+ * tx ints before we are up and running, which may cause a null -+ * pointer access in the int handler. -+ */ -+ sp->rx_skbprd = 0; -+ sp->cur_rx = 0; -+ sp->tx_prd = 0; -+ sp->tx_csm = 0; -+ -+ /* Zero the stats before starting the interface */ -+ memset(&dev->stats, 0, sizeof(dev->stats)); -+ -+ /** -+ * We load the ring here as there seem to be no way to tell the -+ * firmware to wipe the ring without re-initializing it. -+ */ -+ ar231x_load_rx_ring(dev, RX_RING_SIZE); -+ -+ /* Init hardware */ -+ ar231x_reset_reg(dev); -+ -+ /* Get the IRQ */ -+ ecode = request_irq(dev->irq, &ar231x_interrupt, 0, -+ dev->name, dev); -+ if (ecode) { -+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n", -+ dev->name, __func__, dev->irq); -+ goto init_error; -+ } -+ -+ tasklet_enable(&sp->rx_tasklet); -+ -+ return 0; -+ -+init_error: -+ ar231x_init_cleanup(dev); -+ return ecode; -+} -+ -+/** -+ * Load the rx ring. -+ * -+ * Loading rings is safe without holding the spin lock since this is -+ * done only before the device is enabled, thus no interrupts are -+ * generated and by the interrupt handler/tasklet handler. -+ */ -+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ short i, idx; -+ -+ idx = sp->rx_skbprd; -+ -+ for (i = 0; i < nr_bufs; i++) { -+ struct sk_buff *skb; -+ ar231x_descr_t *rd; -+ -+ if (sp->rx_skb[idx]) -+ break; -+ -+ skb = netdev_alloc_skb_ip_align(dev, AR2313_BUFSIZE); -+ if (!skb) { -+ printk("\n\n\n\n %s: No memory in system\n\n\n\n", -+ __func__); -+ break; -+ } -+ -+ /* Make sure IP header starts on a fresh cache line */ -+ skb->dev = dev; -+ sp->rx_skb[idx] = skb; -+ -+ rd = (ar231x_descr_t *)&sp->rx_ring[idx]; -+ -+ /* initialize dma descriptor */ -+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | -+ DMA_RX1_CHAINED); -+ rd->addr = virt_to_phys(skb->data); -+ rd->descr = virt_to_phys(&sp->rx_ring[DSC_NEXT(idx)]); -+ rd->status = DMA_RX_OWN; -+ -+ idx = DSC_NEXT(idx); -+ } -+ -+ if (i) -+ sp->rx_skbprd = idx; -+} -+ -+#define AR2313_MAX_PKTS_PER_CALL 64 -+ -+static int ar231x_rx_int(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ struct sk_buff *skb, *skb_new; -+ ar231x_descr_t *rxdesc; -+ unsigned int status; -+ u32 idx; -+ int pkts = 0; -+ int rval; -+ -+ idx = sp->cur_rx; -+ -+ /* process at most the entire ring and then wait for another int */ -+ while (1) { -+ rxdesc = &sp->rx_ring[idx]; -+ status = rxdesc->status; -+ -+ if (status & DMA_RX_OWN) { -+ /* SiByte owns descriptor or descr not yet filled in */ -+ rval = 0; -+ break; -+ } -+ -+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) { -+ rval = 1; -+ break; -+ } -+ -+ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) { -+ dev->stats.rx_errors++; -+ dev->stats.rx_dropped++; -+ -+ /* add statistics counters */ -+ if (status & DMA_RX_ERR_CRC) -+ dev->stats.rx_crc_errors++; -+ if (status & DMA_RX_ERR_COL) -+ dev->stats.rx_over_errors++; -+ if (status & DMA_RX_ERR_LENGTH) -+ dev->stats.rx_length_errors++; -+ if (status & DMA_RX_ERR_RUNT) -+ dev->stats.rx_over_errors++; -+ if (status & DMA_RX_ERR_DESC) -+ dev->stats.rx_over_errors++; -+ -+ } else { -+ /* alloc new buffer. */ -+ skb_new = netdev_alloc_skb_ip_align(dev, -+ AR2313_BUFSIZE); -+ if (skb_new != NULL) { -+ skb = sp->rx_skb[idx]; -+ /* set skb */ -+ skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & -+ 0x3fff) - CRC_LEN); -+ -+ dev->stats.rx_bytes += skb->len; -+ skb->protocol = eth_type_trans(skb, dev); -+ /* pass the packet to upper layers */ -+ netif_rx(skb); -+ -+ skb_new->dev = dev; -+ /* reset descriptor's curr_addr */ -+ rxdesc->addr = virt_to_phys(skb_new->data); -+ -+ dev->stats.rx_packets++; -+ sp->rx_skb[idx] = skb_new; -+ } else { -+ dev->stats.rx_dropped++; -+ } -+ } -+ -+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | -+ DMA_RX1_CHAINED); -+ rxdesc->status = DMA_RX_OWN; -+ -+ idx = DSC_NEXT(idx); -+ } -+ -+ sp->cur_rx = idx; -+ -+ return rval; -+} -+ -+static void ar231x_tx_int(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ u32 idx; -+ struct sk_buff *skb; -+ ar231x_descr_t *txdesc; -+ unsigned int status = 0; -+ -+ idx = sp->tx_csm; -+ -+ while (idx != sp->tx_prd) { -+ txdesc = &sp->tx_ring[idx]; -+ status = txdesc->status; -+ -+ if (status & DMA_TX_OWN) { -+ /* ar231x dma still owns descr */ -+ break; -+ } -+ /* done with this descriptor */ -+ dma_unmap_single(&sp->pdev->dev, txdesc->addr, -+ txdesc->devcs & DMA_TX1_BSIZE_MASK, -+ DMA_TO_DEVICE); -+ txdesc->status = 0; -+ -+ if (status & DMA_TX_ERROR) { -+ dev->stats.tx_errors++; -+ dev->stats.tx_dropped++; -+ if (status & DMA_TX_ERR_UNDER) -+ dev->stats.tx_fifo_errors++; -+ if (status & DMA_TX_ERR_HB) -+ dev->stats.tx_heartbeat_errors++; -+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK)) -+ dev->stats.tx_carrier_errors++; -+ if (status & (DMA_TX_ERR_LATE | DMA_TX_ERR_COL | -+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER)) -+ dev->stats.tx_aborted_errors++; -+ } else { -+ /* transmit OK */ -+ dev->stats.tx_packets++; -+ } -+ -+ skb = sp->tx_skb[idx]; -+ sp->tx_skb[idx] = NULL; -+ idx = DSC_NEXT(idx); -+ dev->stats.tx_bytes += skb->len; -+ dev_kfree_skb_irq(skb); -+ } -+ -+ sp->tx_csm = idx; -+} -+ -+static void rx_tasklet_func(unsigned long data) -+{ -+ struct net_device *dev = (struct net_device *)data; -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ if (sp->unloading) -+ return; -+ -+ if (ar231x_rx_int(dev)) { -+ tasklet_hi_schedule(&sp->rx_tasklet); -+ } else { -+ unsigned long flags; -+ -+ spin_lock_irqsave(&sp->lock, flags); -+ sp->dma_regs->intr_ena |= DMA_STATUS_RI; -+ spin_unlock_irqrestore(&sp->lock, flags); -+ } -+} -+ -+static void rx_schedule(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI; -+ -+ tasklet_hi_schedule(&sp->rx_tasklet); -+} -+ -+static irqreturn_t ar231x_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *)dev_id; -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int status, enabled; -+ -+ /* clear interrupt */ -+ /* Don't clear RI bit if currently disabled */ -+ status = sp->dma_regs->status; -+ enabled = sp->dma_regs->intr_ena; -+ sp->dma_regs->status = status & enabled; -+ -+ if (status & DMA_STATUS_NIS) { -+ /* normal status */ -+ /** -+ * Don't schedule rx processing if interrupt -+ * is already disabled. -+ */ -+ if (status & enabled & DMA_STATUS_RI) { -+ /* receive interrupt */ -+ rx_schedule(dev); -+ } -+ if (status & DMA_STATUS_TI) { -+ /* transmit interrupt */ -+ ar231x_tx_int(dev); -+ } -+ } -+ -+ /* abnormal status */ -+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) -+ ar231x_restart(dev); -+ -+ return IRQ_HANDLED; -+} -+ -+static int ar231x_open(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int ethsal, ethsah; -+ -+ /* reset the hardware, in case the MAC address changed */ -+ ethsah = (((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | -+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF); -+ -+ ethsal = (((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | -+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | -+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | -+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF); -+ -+ sp->eth_regs->mac_addr[0] = ethsah; -+ sp->eth_regs->mac_addr[1] = ethsal; -+ -+ mdelay(10); -+ -+ dev->mtu = 1500; -+ netif_start_queue(dev); -+ -+ sp->eth_regs->mac_control |= MAC_CONTROL_RE; -+ -+ phy_start(sp->phy_dev); -+ -+ return 0; -+} -+ -+static void ar231x_tx_timeout(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&sp->lock, flags); -+ ar231x_restart(dev); -+ spin_unlock_irqrestore(&sp->lock, flags); -+} -+ -+static void ar231x_halt(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ int j; -+ -+ tasklet_disable(&sp->rx_tasklet); -+ -+ /* kill the MAC */ -+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */ -+ MAC_CONTROL_TE); /* disable Transmits */ -+ /* stop dma */ -+ sp->dma_regs->control = 0; -+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR; -+ -+ /* place phy and MAC in reset */ -+ sp->cfg->reset_set(sp->cfg->reset_mac); -+ sp->cfg->reset_set(sp->cfg->reset_phy); -+ -+ /* free buffers on tx ring */ -+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { -+ struct sk_buff *skb; -+ ar231x_descr_t *txdesc; -+ -+ txdesc = &sp->tx_ring[j]; -+ txdesc->descr = 0; -+ -+ skb = sp->tx_skb[j]; -+ if (skb) { -+ dev_kfree_skb(skb); -+ sp->tx_skb[j] = NULL; -+ } -+ } -+} -+ -+/** -+ * close should do nothing. Here's why. It's called when -+ * 'ifconfig bond0 down' is run. If it calls free_irq then -+ * the irq is gone forever ! When bond0 is made 'up' again, -+ * the ar231x_open () does not call request_irq (). Worse, -+ * the call to ar231x_halt() generates a WDOG reset due to -+ * the write to reset register and the box reboots. -+ * Commenting this out is good since it allows the -+ * system to resume when bond0 is made up again. -+ */ -+static int ar231x_close(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+#if 0 -+ /* Disable interrupts */ -+ disable_irq(dev->irq); -+ -+ /** -+ * Without (or before) releasing irq and stopping hardware, this -+ * is an absolute non-sense, by the way. It will be reset instantly -+ * by the first irq. -+ */ -+ netif_stop_queue(dev); -+ -+ /* stop the MAC and DMA engines */ -+ ar231x_halt(dev); -+ -+ /* release the interrupt */ -+ free_irq(dev->irq, dev); -+ -+#endif -+ -+ phy_stop(sp->phy_dev); -+ -+ return 0; -+} -+ -+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ ar231x_descr_t *td; -+ u32 idx; -+ -+ idx = sp->tx_prd; -+ td = &sp->tx_ring[idx]; -+ -+ if (td->status & DMA_TX_OWN) { -+ /* free skbuf and lie to the caller that we sent it out */ -+ dev->stats.tx_dropped++; -+ dev_kfree_skb(skb); -+ -+ /* restart transmitter in case locked */ -+ sp->dma_regs->xmt_poll = 0; -+ return 0; -+ } -+ -+ /* Setup the transmit descriptor. */ -+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) | -+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED)); -+ td->addr = dma_map_single(&sp->pdev->dev, skb->data, skb->len, DMA_TO_DEVICE); -+ td->status = DMA_TX_OWN; -+ -+ /* kick transmitter last */ -+ sp->dma_regs->xmt_poll = 0; -+ -+ sp->tx_skb[idx] = skb; -+ idx = DSC_NEXT(idx); -+ sp->tx_prd = idx; -+ -+ return 0; -+} -+ -+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ switch (cmd) { -+ case SIOCGMIIPHY: -+ case SIOCGMIIREG: -+ case SIOCSMIIREG: -+ return phy_mii_ioctl(sp->phy_dev, ifr, cmd); -+ -+ default: -+ break; -+ } -+ -+ return -EOPNOTSUPP; -+} -+ -+static void ar231x_adjust_link(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ struct phy_device *phydev = sp->phy_dev; -+ u32 mc; -+ -+ if (!phydev->link) { -+ if (sp->link) { -+ pr_info("%s: link down\n", dev->name); -+ sp->link = 0; -+ } -+ return; -+ } -+ sp->link = 1; -+ -+ pr_info("%s: link up (%uMbps/%s duplex)\n", dev->name, -+ phydev->speed, phydev->duplex ? "full" : "half"); -+ -+ mc = sp->eth_regs->mac_control; -+ if (phydev->duplex) -+ mc = (mc | MAC_CONTROL_F) & ~MAC_CONTROL_DRO; -+ else -+ mc = (mc | MAC_CONTROL_DRO) & ~MAC_CONTROL_F; -+ sp->eth_regs->mac_control = mc; -+ sp->duplex = phydev->duplex; -+} -+ -+#define MII_ADDR(phy, reg) \ -+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) -+ -+static int -+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) -+{ -+ struct net_device *const dev = bus->priv; -+ struct ar231x_private *sp = netdev_priv(dev); -+ volatile MII *ethernet = sp->phy_regs; -+ -+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum); -+ while (ethernet->mii_addr & MII_ADDR_BUSY) -+ ; -+ return ethernet->mii_data >> MII_DATA_SHIFT; -+} -+ -+static int -+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value) -+{ -+ struct net_device *const dev = bus->priv; -+ struct ar231x_private *sp = netdev_priv(dev); -+ volatile MII *ethernet = sp->phy_regs; -+ -+ while (ethernet->mii_addr & MII_ADDR_BUSY) -+ ; -+ ethernet->mii_data = value << MII_DATA_SHIFT; -+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE; -+ -+ return 0; -+} -+ -+static int ar231x_mdiobus_reset(struct mii_bus *bus) -+{ -+ struct net_device *const dev = bus->priv; -+ -+ ar231x_reset_reg(dev); -+ -+ return 0; -+} -+ -+static int ar231x_mdiobus_probe(struct net_device *dev) -+{ -+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; -+ struct ar231x_private *const sp = netdev_priv(dev); -+ struct phy_device *phydev = NULL; -+ -+ /* find the first (lowest address) PHY on the current MAC's MII bus */ -+ phydev = phy_find_first(sp->mii_bus); -+ if (!phydev) { -+ printk(KERN_ERR "ar231x: %s: no PHY found\n", dev->name); -+ return -1; -+ } -+ -+ /* now we are supposed to have a proper phydev, to attach to... */ -+ BUG_ON(phydev->attached_dev); -+ -+ phydev = phy_connect(dev, phydev_name(phydev), &ar231x_adjust_link, -+ PHY_INTERFACE_MODE_MII); -+ if (IS_ERR(phydev)) { -+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); -+ return PTR_ERR(phydev); -+ } -+ -+ /* mask with MAC supported features */ -+ linkmode_set_bit_array(phy_10_100_features_array, -+ ARRAY_SIZE(phy_10_100_features_array), -+ mask); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, mask); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, mask); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, mask); -+ -+ linkmode_and(phydev->supported, phydev->supported, mask); -+ linkmode_copy(phydev->advertising, phydev->supported); -+ -+ sp->phy_dev = phydev; -+ -+ printk(KERN_INFO "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", -+ dev->name, phydev->drv->name, phydev_name(phydev)); -+ -+ return 0; -+} -+ ---- /dev/null -+++ b/drivers/net/ethernet/atheros/ar231x/ar231x.h -@@ -0,0 +1,282 @@ -+/* -+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device. -+ * -+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com> -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name> -+ * -+ * Thanks to Atheros for providing hardware and documentation -+ * enabling me to write this driver. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef _AR2313_H_ -+#define _AR2313_H_ -+ -+#include <linux/interrupt.h> -+#include <generated/autoconf.h> -+#include <linux/bitops.h> -+#include <ath25_platform.h> -+ -+/* probe link timer - 5 secs */ -+#define LINK_TIMER (5*HZ) -+ -+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0) -+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0) -+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0) -+ -+#define AR2313_TX_TIMEOUT (HZ/4) -+ -+/* Rings */ -+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc)) -+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1)) -+ -+#define AR2313_MBGET 2 -+#define AR2313_MBSET 3 -+#define AR2313_PCI_RECONFIG 4 -+#define AR2313_PCI_DUMP 5 -+#define AR2313_TEST_PANIC 6 -+#define AR2313_TEST_NULLPTR 7 -+#define AR2313_READ_DATA 8 -+#define AR2313_WRITE_DATA 9 -+#define AR2313_GET_VERSION 10 -+#define AR2313_TEST_HANG 11 -+#define AR2313_SYNC 12 -+ -+#define DMA_RX_ERR_CRC BIT(1) -+#define DMA_RX_ERR_DRIB BIT(2) -+#define DMA_RX_ERR_MII BIT(3) -+#define DMA_RX_EV2 BIT(5) -+#define DMA_RX_ERR_COL BIT(6) -+#define DMA_RX_LONG BIT(7) -+#define DMA_RX_LS BIT(8) /* last descriptor */ -+#define DMA_RX_FS BIT(9) /* first descriptor */ -+#define DMA_RX_MF BIT(10) /* multicast frame */ -+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */ -+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */ -+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */ -+#define DMA_RX_ERROR BIT(15) /* error summary */ -+#define DMA_RX_LEN_MASK 0x3fff0000 -+#define DMA_RX_LEN_SHIFT 16 -+#define DMA_RX_FILT BIT(30) -+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */ -+ -+#define DMA_RX1_BSIZE_MASK 0x000007ff -+#define DMA_RX1_BSIZE_SHIFT 0 -+#define DMA_RX1_CHAINED BIT(24) -+#define DMA_RX1_RER BIT(25) -+ -+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */ -+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */ -+#define DMA_TX_COL_MASK 0x78 -+#define DMA_TX_COL_SHIFT 3 -+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */ -+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */ -+#define DMA_TX_ERR_LATE BIT(9) /* late collision */ -+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */ -+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */ -+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */ -+#define DMA_TX_ERROR BIT(15) /* frame aborted */ -+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */ -+ -+#define DMA_TX1_BSIZE_MASK 0x000007ff -+#define DMA_TX1_BSIZE_SHIFT 0 -+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */ -+#define DMA_TX1_TER BIT(25) /* transmit end of ring */ -+#define DMA_TX1_FS BIT(29) /* first segment */ -+#define DMA_TX1_LS BIT(30) /* last segment */ -+#define DMA_TX1_IC BIT(31) /* interrupt on completion */ -+ -+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */ -+ -+#define MAC_CONTROL_RE BIT(2) /* receive enable */ -+#define MAC_CONTROL_TE BIT(3) /* transmit enable */ -+#define MAC_CONTROL_DC BIT(5) /* Deferral check */ -+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */ -+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */ -+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */ -+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */ -+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */ -+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */ -+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */ -+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */ -+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */ -+#define MAC_CONTROL_PR BIT(18) /* promis mode (valid frames only) */ -+#define MAC_CONTROL_PM BIT(19) /* pass multicast */ -+#define MAC_CONTROL_F BIT(20) /* full-duplex */ -+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */ -+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */ -+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */ -+#define MAC_CONTROL_RA BIT(31) /* rcv all (valid and invalid frames) */ -+ -+#define MII_ADDR_BUSY BIT(0) -+#define MII_ADDR_WRITE BIT(1) -+#define MII_ADDR_REG_SHIFT 6 -+#define MII_ADDR_PHY_SHIFT 11 -+#define MII_DATA_SHIFT 0 -+ -+#define FLOW_CONTROL_FCE BIT(1) -+ -+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */ -+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */ -+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */ -+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */ -+ -+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */ -+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */ -+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */ -+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */ -+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */ -+#define DMA_STATUS_RI BIT(6) /* receive interrupt */ -+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */ -+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */ -+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */ -+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */ -+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */ -+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */ -+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */ -+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */ -+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */ -+#define DMA_STATUS_EB_SHIFT 23 /* error bits */ -+ -+#define DMA_CONTROL_SR BIT(1) /* start receive */ -+#define DMA_CONTROL_ST BIT(13) /* start transmit */ -+#define DMA_CONTROL_SF BIT(21) /* store and forward */ -+ -+typedef struct { -+ volatile unsigned int status; /* OWN, Device control and status. */ -+ volatile unsigned int devcs; /* pkt Control bits + Length */ -+ volatile unsigned int addr; /* Current Address. */ -+ volatile unsigned int descr; /* Next descriptor in chain. */ -+} ar231x_descr_t; -+ -+/** -+ * New Combo structure for Both Eth0 AND eth1 -+ * -+ * Don't directly access MII related regs since phy chip could be actually -+ * connected to another ethernet block. -+ */ -+typedef struct { -+ volatile unsigned int mac_control; /* 0x00 */ -+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */ -+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */ -+ volatile unsigned int __mii_addr; /* 0x14 */ -+ volatile unsigned int __mii_data; /* 0x18 */ -+ volatile unsigned int flow_control; /* 0x1c */ -+ volatile unsigned int vlan_tag; /* 0x20 */ -+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */ -+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */ -+} ETHERNET_STRUCT; -+ -+typedef struct { -+ volatile unsigned int mii_addr; -+ volatile unsigned int mii_data; -+} MII; -+ -+/******************************************************************** -+ * Interrupt controller -+ ********************************************************************/ -+ -+typedef struct { -+ volatile unsigned int wdog_control; /* 0x08 */ -+ volatile unsigned int wdog_timer; /* 0x0c */ -+ volatile unsigned int misc_status; /* 0x10 */ -+ volatile unsigned int misc_mask; /* 0x14 */ -+ volatile unsigned int global_status; /* 0x18 */ -+ volatile unsigned int reserved; /* 0x1c */ -+ volatile unsigned int reset_control; /* 0x20 */ -+} INTERRUPT; -+ -+/******************************************************************** -+ * DMA controller -+ ********************************************************************/ -+typedef struct { -+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */ -+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */ -+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */ -+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */ -+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */ -+ volatile unsigned int status; /* 0x14 (CSR5) */ -+ volatile unsigned int control; /* 0x18 (CSR6) */ -+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */ -+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */ -+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */ -+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */ -+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */ -+} DMA; -+ -+/** -+ * Struct private for the Sibyte. -+ * -+ * Elements are grouped so variables used by the tx handling goes -+ * together, and will go into the same cache lines etc. in order to -+ * avoid cache line contention between the rx and tx handling on SMP. -+ * -+ * Frequently accessed variables are put at the beginning of the -+ * struct to help the compiler generate better/shorter code. -+ */ -+struct ar231x_private { -+ struct net_device *dev; -+ struct platform_device *pdev; -+ int version; -+ u32 mb[2]; -+ -+ volatile MII *phy_regs; -+ volatile ETHERNET_STRUCT *eth_regs; -+ volatile DMA *dma_regs; -+ struct ar231x_eth *cfg; -+ -+ spinlock_t lock; /* Serialise access to device */ -+ -+ /* RX and TX descriptors, must be adjacent */ -+ ar231x_descr_t *rx_ring; -+ ar231x_descr_t *tx_ring; -+ -+ struct sk_buff **rx_skb; -+ struct sk_buff **tx_skb; -+ -+ /* RX elements */ -+ u32 rx_skbprd; -+ u32 cur_rx; -+ -+ /* TX elements */ -+ u32 tx_prd; -+ u32 tx_csm; -+ -+ /* Misc elements */ -+ char name[48]; -+ struct { -+ u32 address; -+ u32 length; -+ char *mapping; -+ } desc; -+ -+ unsigned short link; /* 0 - link down, 1 - link up */ -+ unsigned short duplex; /* 0 - half, 1 - full */ -+ -+ struct tasklet_struct rx_tasklet; -+ int unloading; -+ -+ struct phy_device *phy_dev; -+ struct mii_bus *mii_bus; -+}; -+ -+/* Prototypes */ -+static int ar231x_init(struct net_device *dev); -+#ifdef TX_TIMEOUT -+static void ar231x_tx_timeout(struct net_device *dev); -+#endif -+static int ar231x_restart(struct net_device *dev); -+static void ar231x_load_rx_ring(struct net_device *dev, int bufs); -+static irqreturn_t ar231x_interrupt(int irq, void *dev_id); -+static int ar231x_open(struct net_device *dev); -+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev); -+static int ar231x_close(struct net_device *dev); -+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); -+static void ar231x_init_cleanup(struct net_device *dev); -+ -+#endif /* _AR2313_H_ */ ---- a/arch/mips/ath25/ar2315_regs.h -+++ b/arch/mips/ath25/ar2315_regs.h -@@ -57,6 +57,9 @@ - #define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */ - #define AR2315_PCI_EXT_SIZE 0x40000000 - -+/* MII registers offset inside Ethernet MMR region */ -+#define AR2315_ENET0_MII_BASE (AR2315_ENET0_BASE + 0x14) -+ - /* - * Configuration registers - */ ---- a/arch/mips/ath25/ar5312_regs.h -+++ b/arch/mips/ath25/ar5312_regs.h -@@ -64,6 +64,10 @@ - #define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ - #define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ - -+/* MII registers offset inside Ethernet MMR region */ -+#define AR5312_ENET0_MII_BASE (AR5312_ENET0_BASE + 0x14) -+#define AR5312_ENET1_MII_BASE (AR5312_ENET1_BASE + 0x14) -+ - /* Reset/Timer Block Address Map */ - #define AR5312_TIMER 0x0000 /* countdown timer */ - #define AR5312_RELOAD 0x0004 /* timer reload value */ ---- a/arch/mips/ath25/ar2315.c -+++ b/arch/mips/ath25/ar2315.c -@@ -136,6 +136,8 @@ static void ar2315_irq_dispatch(void) - - if (pending & CAUSEF_IP3) - do_IRQ(AR2315_IRQ_WLAN0); -+ else if (pending & CAUSEF_IP4) -+ do_IRQ(AR2315_IRQ_ENET0); - #ifdef CONFIG_PCI_AR2315 - else if (pending & CAUSEF_IP5) - do_IRQ(AR2315_IRQ_LCBUS_PCI); -@@ -169,6 +171,29 @@ void __init ar2315_arch_init_irq(void) - ar2315_misc_irq_domain = domain; - } - -+static void ar2315_device_reset_set(u32 mask) -+{ -+ u32 val; -+ -+ val = ar2315_rst_reg_read(AR2315_RESET); -+ ar2315_rst_reg_write(AR2315_RESET, val | mask); -+} -+ -+static void ar2315_device_reset_clear(u32 mask) -+{ -+ u32 val; -+ -+ val = ar2315_rst_reg_read(AR2315_RESET); -+ ar2315_rst_reg_write(AR2315_RESET, val & ~mask); -+} -+ -+static struct ar231x_eth ar2315_eth_data = { -+ .reset_set = ar2315_device_reset_set, -+ .reset_clear = ar2315_device_reset_clear, -+ .reset_mac = AR2315_RESET_ENET0, -+ .reset_phy = AR2315_RESET_EPHY0, -+}; -+ - static struct resource ar2315_gpio_res[] = { - { - .name = "ar2315-gpio", -@@ -205,6 +230,11 @@ void __init ar2315_init_devices(void) - ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; - platform_device_register(&ar2315_gpio); - -+ ar2315_eth_data.macaddr = ath25_board.config->enet0_mac; -+ ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii", -+ AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0, -+ &ar2315_eth_data); -+ - ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0); - } - ---- a/arch/mips/ath25/ar5312.c -+++ b/arch/mips/ath25/ar5312.c -@@ -132,6 +132,10 @@ static void ar5312_irq_dispatch(void) - - if (pending & CAUSEF_IP2) - do_IRQ(AR5312_IRQ_WLAN0); -+ else if (pending & CAUSEF_IP3) -+ do_IRQ(AR5312_IRQ_ENET0); -+ else if (pending & CAUSEF_IP4) -+ do_IRQ(AR5312_IRQ_ENET1); - else if (pending & CAUSEF_IP5) - do_IRQ(AR5312_IRQ_WLAN1); - else if (pending & CAUSEF_IP6) -@@ -163,6 +167,36 @@ void __init ar5312_arch_init_irq(void) - ar5312_misc_irq_domain = domain; - } - -+static void ar5312_device_reset_set(u32 mask) -+{ -+ u32 val; -+ -+ val = ar5312_rst_reg_read(AR5312_RESET); -+ ar5312_rst_reg_write(AR5312_RESET, val | mask); -+} -+ -+static void ar5312_device_reset_clear(u32 mask) -+{ -+ u32 val; -+ -+ val = ar5312_rst_reg_read(AR5312_RESET); -+ ar5312_rst_reg_write(AR5312_RESET, val & ~mask); -+} -+ -+static struct ar231x_eth ar5312_eth0_data = { -+ .reset_set = ar5312_device_reset_set, -+ .reset_clear = ar5312_device_reset_clear, -+ .reset_mac = AR5312_RESET_ENET0, -+ .reset_phy = AR5312_RESET_EPHY0, -+}; -+ -+static struct ar231x_eth ar5312_eth1_data = { -+ .reset_set = ar5312_device_reset_set, -+ .reset_clear = ar5312_device_reset_clear, -+ .reset_mac = AR5312_RESET_ENET1, -+ .reset_phy = AR5312_RESET_EPHY1, -+}; -+ - static struct physmap_flash_data ar5312_flash_data = { - .width = 2, - }; -@@ -243,6 +277,7 @@ static void __init ar5312_flash_init(voi - void __init ar5312_init_devices(void) - { - struct ath25_boarddata *config; -+ u8 *c; - - ar5312_flash_init(); - -@@ -266,8 +301,30 @@ void __init ar5312_init_devices(void) - - platform_device_register(&ar5312_gpio); - -+ /* Fix up MAC addresses if necessary */ -+ if (is_broadcast_ether_addr(config->enet0_mac)) -+ ether_addr_copy(config->enet0_mac, config->enet1_mac); -+ -+ /* If ENET0 and ENET1 have the same mac address, -+ * increment the one from ENET1 */ -+ if (ether_addr_equal(config->enet0_mac, config->enet1_mac)) { -+ c = config->enet1_mac + 5; -+ while ((c >= config->enet1_mac) && !(++(*c))) -+ c--; -+ } -+ - switch (ath25_soc) { - case ATH25_SOC_AR5312: -+ ar5312_eth0_data.macaddr = config->enet0_mac; -+ ath25_add_ethernet(0, AR5312_ENET0_BASE, "eth0_mii", -+ AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET0, -+ &ar5312_eth0_data); -+ -+ ar5312_eth1_data.macaddr = config->enet1_mac; -+ ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth1_mii", -+ AR5312_ENET1_MII_BASE, AR5312_IRQ_ENET1, -+ &ar5312_eth1_data); -+ - if (!ath25_board.radio) - return; - -@@ -276,8 +333,18 @@ void __init ar5312_init_devices(void) - - ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0); - break; -+ /* -+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC -+ * of ENET1. Atheros calls it 'twisted' for a reason :) -+ */ - case ATH25_SOC_AR2312: - case ATH25_SOC_AR2313: -+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy; -+ ar5312_eth1_data.macaddr = config->enet0_mac; -+ ath25_add_ethernet(1, AR5312_ENET1_BASE, "eth0_mii", -+ AR5312_ENET0_MII_BASE, AR5312_IRQ_ENET1, -+ &ar5312_eth1_data); -+ - if (!ath25_board.radio) - return; - break; ---- a/arch/mips/ath25/devices.h -+++ b/arch/mips/ath25/devices.h -@@ -33,6 +33,8 @@ extern struct ar231x_board_config ath25_ - extern void (*ath25_irq_dispatch)(void); - - int ath25_find_config(phys_addr_t offset, unsigned long size); -+int ath25_add_ethernet(int nr, u32 base, const char *mii_name, u32 mii_base, -+ int irq, void *pdata); - void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk); - int ath25_add_wmac(int nr, u32 base, int irq); - ---- a/arch/mips/ath25/devices.c -+++ b/arch/mips/ath25/devices.c -@@ -13,6 +13,51 @@ - struct ar231x_board_config ath25_board; - enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN; - -+static struct resource ath25_eth0_res[] = { -+ { -+ .name = "eth0_membase", -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "eth0_mii", -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "eth0_irq", -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct resource ath25_eth1_res[] = { -+ { -+ .name = "eth1_membase", -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "eth1_mii", -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "eth1_irq", -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct platform_device ath25_eth[] = { -+ { -+ .id = 0, -+ .name = "ar231x-eth", -+ .resource = ath25_eth0_res, -+ .num_resources = ARRAY_SIZE(ath25_eth0_res) -+ }, -+ { -+ .id = 1, -+ .name = "ar231x-eth", -+ .resource = ath25_eth1_res, -+ .num_resources = ARRAY_SIZE(ath25_eth1_res) -+ } -+}; -+ - static struct resource ath25_wmac0_res[] = { - { - .name = "wmac0_membase", -@@ -71,6 +116,25 @@ const char *get_system_type(void) - return soc_type_strings[ath25_soc]; - } - -+int __init ath25_add_ethernet(int nr, u32 base, const char *mii_name, -+ u32 mii_base, int irq, void *pdata) -+{ -+ struct resource *res; -+ -+ ath25_eth[nr].dev.platform_data = pdata; -+ res = &ath25_eth[nr].resource[0]; -+ res->start = base; -+ res->end = base + 0x2000 - 1; -+ res++; -+ res->name = mii_name; -+ res->start = mii_base; -+ res->end = mii_base + 8 - 1; -+ res++; -+ res->start = irq; -+ res->end = irq; -+ return platform_device_register(&ath25_eth[nr]); -+} -+ - void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk) - { - #ifdef CONFIG_SERIAL_8250_CONSOLE ---- a/arch/mips/include/asm/mach-ath25/ath25_platform.h -+++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h -@@ -71,4 +71,15 @@ struct ar231x_board_config { - const char *radio; - }; - -+/* -+ * Platform device information for the Ethernet MAC -+ */ -+struct ar231x_eth { -+ void (*reset_set)(u32); -+ void (*reset_clear)(u32); -+ u32 reset_mac; -+ u32 reset_phy; -+ char *macaddr; -+}; -+ - #endif /* __ASM_MACH_ATH25_PLATFORM_H */ diff --git a/target/linux/ath25/patches-5.4/120-spiflash.patch b/target/linux/ath25/patches-5.4/120-spiflash.patch deleted file mode 100644 index 52460f89dd..0000000000 --- a/target/linux/ath25/patches-5.4/120-spiflash.patch +++ /dev/null @@ -1,631 +0,0 @@ ---- a/drivers/mtd/devices/Kconfig -+++ b/drivers/mtd/devices/Kconfig -@@ -114,6 +114,10 @@ config MTD_BCM47XXSFLASH - registered by bcma as platform devices. This enables driver for - serial flash memories. - -+config MTD_AR2315 -+ tristate "Atheros AR2315+ SPI Flash support" -+ depends on SOC_AR2315 -+ - config MTD_SLRAM - tristate "Uncached system RAM" - help ---- a/drivers/mtd/devices/Makefile -+++ b/drivers/mtd/devices/Makefile -@@ -15,6 +15,7 @@ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataf - obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o - obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o - obj-$(CONFIG_MTD_SST25L) += sst25l.o -+obj-$(CONFIG_MTD_AR2315) += ar2315.o - obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o - obj-$(CONFIG_MTD_ST_SPI_FSM) += st_spi_fsm.o - obj-$(CONFIG_MTD_POWERNV_FLASH) += powernv_flash.o ---- /dev/null -+++ b/drivers/mtd/devices/ar2315.c -@@ -0,0 +1,456 @@ -+ -+/* -+ * MTD driver for the SPI Flash Memory support on Atheros AR2315 -+ * -+ * Copyright (c) 2005-2006 Atheros Communications Inc. -+ * Copyright (C) 2006-2007 FON Technology, SL. -+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name> -+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> -+ * -+ * This code is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/slab.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/platform_device.h> -+#include <linux/sched.h> -+#include <linux/delay.h> -+#include <linux/io.h> -+#include <linux/mutex.h> -+ -+#include "ar2315_spiflash.h" -+ -+#define DRIVER_NAME "ar2315-spiflash" -+ -+#define busy_wait(_priv, _condition, _wait) do { \ -+ while (_condition) { \ -+ if (_wait > 1) \ -+ msleep(_wait); \ -+ else if ((_wait == 1) && need_resched()) \ -+ schedule(); \ -+ else \ -+ udelay(1); \ -+ } \ -+} while (0) -+ -+enum { -+ FLASH_NONE, -+ FLASH_1MB, -+ FLASH_2MB, -+ FLASH_4MB, -+ FLASH_8MB, -+ FLASH_16MB, -+}; -+ -+/* Flash configuration table */ -+struct flashconfig { -+ u32 byte_cnt; -+ u32 sector_cnt; -+ u32 sector_size; -+}; -+ -+static const struct flashconfig flashconfig_tbl[] = { -+ [FLASH_NONE] = { 0, 0, 0}, -+ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, -+ STM_1MB_SECTOR_SIZE}, -+ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, -+ STM_2MB_SECTOR_SIZE}, -+ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, -+ STM_4MB_SECTOR_SIZE}, -+ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, -+ STM_8MB_SECTOR_SIZE}, -+ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, -+ STM_16MB_SECTOR_SIZE} -+}; -+ -+/* Mapping of generic opcodes to STM serial flash opcodes */ -+enum { -+ SPI_WRITE_ENABLE, -+ SPI_WRITE_DISABLE, -+ SPI_RD_STATUS, -+ SPI_WR_STATUS, -+ SPI_RD_DATA, -+ SPI_FAST_RD_DATA, -+ SPI_PAGE_PROGRAM, -+ SPI_SECTOR_ERASE, -+ SPI_BULK_ERASE, -+ SPI_DEEP_PWRDOWN, -+ SPI_RD_SIG, -+}; -+ -+struct opcodes { -+ __u16 code; -+ __s8 tx_cnt; -+ __s8 rx_cnt; -+}; -+ -+static const struct opcodes stm_opcodes[] = { -+ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0}, -+ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0}, -+ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1}, -+ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0}, -+ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4}, -+ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0}, -+ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0}, -+ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0}, -+ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0}, -+ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0}, -+ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1}, -+}; -+ -+/* Driver private data structure */ -+struct spiflash_priv { -+ struct mtd_info mtd; -+ void __iomem *readaddr; /* memory mapped data for read */ -+ void __iomem *mmraddr; /* memory mapped register space */ -+ struct mutex lock; /* serialize registers access */ -+}; -+ -+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd) -+ -+enum { -+ FL_READY, -+ FL_READING, -+ FL_ERASING, -+ FL_WRITING -+}; -+ -+/*****************************************************************************/ -+ -+static u32 -+spiflash_read_reg(struct spiflash_priv *priv, int reg) -+{ -+ return ioread32(priv->mmraddr + reg); -+} -+ -+static void -+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data) -+{ -+ iowrite32(data, priv->mmraddr + reg); -+} -+ -+static u32 -+spiflash_wait_busy(struct spiflash_priv *priv) -+{ -+ u32 reg; -+ -+ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) & -+ SPI_CTL_BUSY, 0); -+ return reg; -+} -+ -+static u32 -+spiflash_sendcmd(struct spiflash_priv *priv, int opcode, u32 addr) -+{ -+ const struct opcodes *op; -+ u32 reg, mask; -+ -+ op = &stm_opcodes[opcode]; -+ reg = spiflash_wait_busy(priv); -+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, -+ ((u32)op->code) | (addr << 8)); -+ -+ reg &= ~SPI_CTL_TX_RX_CNT_MASK; -+ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4); -+ -+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); -+ spiflash_wait_busy(priv); -+ -+ if (!op->rx_cnt) -+ return 0; -+ -+ reg = spiflash_read_reg(priv, SPI_FLASH_DATA); -+ -+ switch (op->rx_cnt) { -+ case 1: -+ mask = 0x000000ff; -+ break; -+ case 2: -+ mask = 0x0000ffff; -+ break; -+ case 3: -+ mask = 0x00ffffff; -+ break; -+ default: -+ mask = 0xffffffff; -+ break; -+ } -+ reg &= mask; -+ -+ return reg; -+} -+ -+/* -+ * Probe SPI flash device -+ * Function returns 0 for failure. -+ * and flashconfig_tbl array index for success. -+ */ -+static int -+spiflash_probe_chip(struct platform_device *pdev, struct spiflash_priv *priv) -+{ -+ u32 sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0); -+ int flash_size; -+ -+ switch (sig) { -+ case STM_8MBIT_SIGNATURE: -+ flash_size = FLASH_1MB; -+ break; -+ case STM_16MBIT_SIGNATURE: -+ flash_size = FLASH_2MB; -+ break; -+ case STM_32MBIT_SIGNATURE: -+ flash_size = FLASH_4MB; -+ break; -+ case STM_64MBIT_SIGNATURE: -+ flash_size = FLASH_8MB; -+ break; -+ case STM_128MBIT_SIGNATURE: -+ flash_size = FLASH_16MB; -+ break; -+ default: -+ dev_warn(&pdev->dev, "read of flash device signature failed!\n"); -+ return 0; -+ } -+ -+ return flash_size; -+} -+ -+static void -+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout) -+{ -+ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) & -+ SPI_STATUS_WIP, timeout); -+} -+ -+static int -+spiflash_erase(struct mtd_info *mtd, struct erase_info *instr) -+{ -+ struct spiflash_priv *priv = to_spiflash(mtd); -+ const struct opcodes *op; -+ u32 temp, reg; -+ -+ if (instr->addr + instr->len > mtd->size) -+ return -EINVAL; -+ -+ mutex_lock(&priv->lock); -+ -+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); -+ reg = spiflash_wait_busy(priv); -+ -+ op = &stm_opcodes[SPI_SECTOR_ERASE]; -+ temp = ((u32)instr->addr << 8) | (u32)(op->code); -+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp); -+ -+ reg &= ~SPI_CTL_TX_RX_CNT_MASK; -+ reg |= op->tx_cnt | SPI_CTL_START; -+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); -+ -+ spiflash_wait_complete(priv, 20); -+ -+ mutex_unlock(&priv->lock); -+ -+ return 0; -+} -+ -+static int -+spiflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, -+ u_char *buf) -+{ -+ struct spiflash_priv *priv = to_spiflash(mtd); -+ -+ if (!len) -+ return 0; -+ -+ if (from + len > mtd->size) -+ return -EINVAL; -+ -+ *retlen = len; -+ -+ mutex_lock(&priv->lock); -+ -+ memcpy_fromio(buf, priv->readaddr + from, len); -+ -+ mutex_unlock(&priv->lock); -+ -+ return 0; -+} -+ -+static int -+spiflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, -+ const u8 *buf) -+{ -+ struct spiflash_priv *priv = to_spiflash(mtd); -+ u32 opcode, bytes_left; -+ -+ *retlen = 0; -+ -+ if (!len) -+ return 0; -+ -+ if (to + len > mtd->size) -+ return -EINVAL; -+ -+ bytes_left = len; -+ -+ do { -+ u32 read_len, reg, page_offset, spi_data = 0; -+ -+ read_len = min(bytes_left, sizeof(u32)); -+ -+ /* 32-bit writes cannot span across a page boundary -+ * (256 bytes). This types of writes require two page -+ * program operations to handle it correctly. The STM part -+ * will write the overflow data to the beginning of the -+ * current page as opposed to the subsequent page. -+ */ -+ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len; -+ -+ if (page_offset > STM_PAGE_SIZE) -+ read_len -= (page_offset - STM_PAGE_SIZE); -+ -+ mutex_lock(&priv->lock); -+ -+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); -+ spi_data = 0; -+ switch (read_len) { -+ case 4: -+ spi_data |= buf[3] << 24; -+ /* fall through */ -+ case 3: -+ spi_data |= buf[2] << 16; -+ /* fall through */ -+ case 2: -+ spi_data |= buf[1] << 8; -+ /* fall through */ -+ case 1: -+ spi_data |= buf[0] & 0xff; -+ break; -+ default: -+ break; -+ } -+ -+ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data); -+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code | -+ (to & 0x00ffffff) << 8; -+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode); -+ -+ reg = spiflash_read_reg(priv, SPI_FLASH_CTL); -+ reg &= ~SPI_CTL_TX_RX_CNT_MASK; -+ reg |= (read_len + 4) | SPI_CTL_START; -+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); -+ -+ spiflash_wait_complete(priv, 1); -+ -+ mutex_unlock(&priv->lock); -+ -+ bytes_left -= read_len; -+ to += read_len; -+ buf += read_len; -+ -+ *retlen += read_len; -+ } while (bytes_left != 0); -+ -+ return 0; -+} -+ -+#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS -+static const char * const part_probe_types[] = { -+ "cmdlinepart", "RedBoot", "MyLoader", NULL -+}; -+#endif -+ -+static int -+spiflash_probe(struct platform_device *pdev) -+{ -+ struct spiflash_priv *priv; -+ struct mtd_info *mtd; -+ struct resource *res; -+ int index; -+ int result = 0; -+ -+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ mutex_init(&priv->lock); -+ mtd = &priv->mtd; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ priv->mmraddr = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(priv->mmraddr)) { -+ dev_warn(&pdev->dev, "failed to map flash MMR\n"); -+ return PTR_ERR(priv->mmraddr); -+ } -+ -+ index = spiflash_probe_chip(pdev, priv); -+ if (!index) { -+ dev_warn(&pdev->dev, "found no flash device\n"); -+ return -ENODEV; -+ } -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ priv->readaddr = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(priv->readaddr)) { -+ dev_warn(&pdev->dev, "failed to map flash read mem\n"); -+ return PTR_ERR(priv->readaddr); -+ } -+ -+ platform_set_drvdata(pdev, priv); -+ mtd->name = "spiflash"; -+ mtd->type = MTD_NORFLASH; -+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); -+ mtd->size = flashconfig_tbl[index].byte_cnt; -+ mtd->erasesize = flashconfig_tbl[index].sector_size; -+ mtd->writesize = 1; -+ mtd->numeraseregions = 0; -+ mtd->eraseregions = NULL; -+ mtd->_erase = spiflash_erase; -+ mtd->_read = spiflash_read; -+ mtd->_write = spiflash_write; -+ mtd->owner = THIS_MODULE; -+ -+ dev_info(&pdev->dev, "%lld Kbytes flash detected\n", mtd->size >> 10); -+ -+#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS -+ /* parse redboot partitions */ -+ -+ result = mtd_device_parse_register(mtd, part_probe_types, -+ NULL, NULL, 0); -+#endif -+ -+ return result; -+} -+ -+static int -+spiflash_remove(struct platform_device *pdev) -+{ -+ struct spiflash_priv *priv = platform_get_drvdata(pdev); -+ -+ mtd_device_unregister(&priv->mtd); -+ -+ return 0; -+} -+ -+static struct platform_driver spiflash_driver = { -+ .driver.name = DRIVER_NAME, -+ .probe = spiflash_probe, -+ .remove = spiflash_remove, -+}; -+ -+module_platform_driver(spiflash_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("OpenWrt.org"); -+MODULE_AUTHOR("Atheros Communications Inc"); -+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros AR2315+ SOC"); -+MODULE_ALIAS("platform:" DRIVER_NAME); -+ ---- /dev/null -+++ b/drivers/mtd/devices/ar2315_spiflash.h -@@ -0,0 +1,106 @@ -+/* -+ * Atheros AR2315 SPI Flash Memory support header file. -+ * -+ * Copyright (c) 2005, Atheros Communications Inc. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@nbd.name> -+ * -+ * This code is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+#ifndef __AR2315_SPIFLASH_H -+#define __AR2315_SPIFLASH_H -+ -+#define STM_PAGE_SIZE 256 -+ -+#define SFI_WRITE_BUFFER_SIZE 4 -+#define SFI_FLASH_ADDR_MASK 0x00ffffff -+ -+#define STM_8MBIT_SIGNATURE 0x13 -+#define STM_M25P80_BYTE_COUNT 1048576 -+#define STM_M25P80_SECTOR_COUNT 16 -+#define STM_M25P80_SECTOR_SIZE 0x10000 -+ -+#define STM_16MBIT_SIGNATURE 0x14 -+#define STM_M25P16_BYTE_COUNT 2097152 -+#define STM_M25P16_SECTOR_COUNT 32 -+#define STM_M25P16_SECTOR_SIZE 0x10000 -+ -+#define STM_32MBIT_SIGNATURE 0x15 -+#define STM_M25P32_BYTE_COUNT 4194304 -+#define STM_M25P32_SECTOR_COUNT 64 -+#define STM_M25P32_SECTOR_SIZE 0x10000 -+ -+#define STM_64MBIT_SIGNATURE 0x16 -+#define STM_M25P64_BYTE_COUNT 8388608 -+#define STM_M25P64_SECTOR_COUNT 128 -+#define STM_M25P64_SECTOR_SIZE 0x10000 -+ -+#define STM_128MBIT_SIGNATURE 0x17 -+#define STM_M25P128_BYTE_COUNT 16777216 -+#define STM_M25P128_SECTOR_COUNT 256 -+#define STM_M25P128_SECTOR_SIZE 0x10000 -+ -+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT -+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT -+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE -+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT -+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT -+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE -+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT -+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT -+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE -+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT -+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT -+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE -+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT -+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT -+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE -+ -+/* -+ * ST Microelectronics Opcodes for Serial Flash -+ */ -+ -+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ -+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ -+#define STM_OP_RD_STATUS 0x05 /* Read Status */ -+#define STM_OP_WR_STATUS 0x01 /* Write Status */ -+#define STM_OP_RD_DATA 0x03 /* Read Data */ -+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ -+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ -+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ -+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ -+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ -+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ -+ -+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ -+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ -+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ -+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ -+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ -+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ -+ -+/* -+ * SPI Flash Interface Registers -+ */ -+ -+#define SPI_FLASH_CTL 0x00 -+#define SPI_FLASH_OPCODE 0x04 -+#define SPI_FLASH_DATA 0x08 -+ -+#define SPI_CTL_START 0x00000100 -+#define SPI_CTL_BUSY 0x00010000 -+#define SPI_CTL_TXCNT_MASK 0x0000000f -+#define SPI_CTL_RXCNT_MASK 0x000000f0 -+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff -+#define SPI_CTL_SIZE_MASK 0x00060000 -+ -+#define SPI_CTL_CLK_SEL_MASK 0x03000000 -+#define SPI_OPCODE_MASK 0x000000ff -+ -+#define SPI_STATUS_WIP STM_STATUS_WIP -+ -+#endif ---- a/arch/mips/ath25/ar2315.c -+++ b/arch/mips/ath25/ar2315.c -@@ -220,6 +220,28 @@ static struct platform_device ar2315_gpi - .num_resources = ARRAY_SIZE(ar2315_gpio_res) - }; - -+static struct resource ar2315_spiflash_res[] = { -+ { -+ .name = "spiflash_read", -+ .flags = IORESOURCE_MEM, -+ .start = AR2315_SPI_READ_BASE, -+ .end = AR2315_SPI_READ_BASE + AR2315_SPI_READ_SIZE - 1, -+ }, -+ { -+ .name = "spiflash_mmr", -+ .flags = IORESOURCE_MEM, -+ .start = AR2315_SPI_MMR_BASE, -+ .end = AR2315_SPI_MMR_BASE + AR2315_SPI_MMR_SIZE - 1, -+ }, -+}; -+ -+static struct platform_device ar2315_spiflash = { -+ .id = 0, -+ .name = "ar2315-spiflash", -+ .resource = ar2315_spiflash_res, -+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res) -+}; -+ - void __init ar2315_init_devices(void) - { - /* Find board configuration */ -@@ -230,6 +252,8 @@ void __init ar2315_init_devices(void) - ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; - platform_device_register(&ar2315_gpio); - -+ platform_device_register(&ar2315_spiflash); -+ - ar2315_eth_data.macaddr = ath25_board.config->enet0_mac; - ath25_add_ethernet(0, AR2315_ENET0_BASE, "eth0_mii", - AR2315_ENET0_MII_BASE, AR2315_IRQ_ENET0, diff --git a/target/linux/ath25/patches-5.4/130-watchdog.patch b/target/linux/ath25/patches-5.4/130-watchdog.patch deleted file mode 100644 index b0bdd88bd1..0000000000 --- a/target/linux/ath25/patches-5.4/130-watchdog.patch +++ /dev/null @@ -1,277 +0,0 @@ ---- /dev/null -+++ b/drivers/watchdog/ar2315-wtd.c -@@ -0,0 +1,209 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, see <http://www.gnu.org/licenses/>. -+ * -+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org> -+ * Based on EP93xx and ifxmips wdt driver -+ */ -+ -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/types.h> -+#include <linux/miscdevice.h> -+#include <linux/watchdog.h> -+#include <linux/fs.h> -+#include <linux/ioport.h> -+#include <linux/notifier.h> -+#include <linux/reboot.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/io.h> -+#include <linux/uaccess.h> -+ -+#define DRIVER_NAME "ar2315-wdt" -+ -+#define CLOCK_RATE 40000000 -+#define HEARTBEAT(x) (x < 1 || x > 90 ? 20 : x) -+ -+#define WDT_REG_TIMER 0x00 -+#define WDT_REG_CTRL 0x04 -+ -+#define WDT_CTRL_ACT_NONE 0x00000000 /* No action */ -+#define WDT_CTRL_ACT_NMI 0x00000001 /* NMI on watchdog */ -+#define WDT_CTRL_ACT_RESET 0x00000002 /* reset on watchdog */ -+ -+static int wdt_timeout = 20; -+static int started; -+static int in_use; -+static void __iomem *wdt_base; -+ -+static inline void ar2315_wdt_wr(unsigned reg, u32 val) -+{ -+ iowrite32(val, wdt_base + reg); -+} -+ -+static void -+ar2315_wdt_enable(void) -+{ -+ ar2315_wdt_wr(WDT_REG_TIMER, wdt_timeout * CLOCK_RATE); -+} -+ -+static ssize_t -+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, -+ loff_t *ppos) -+{ -+ if (len) -+ ar2315_wdt_enable(); -+ return len; -+} -+ -+static int -+ar2315_wdt_open(struct inode *inode, struct file *file) -+{ -+ if (in_use) -+ return -EBUSY; -+ ar2315_wdt_enable(); -+ in_use = 1; -+ started = 1; -+ return nonseekable_open(inode, file); -+} -+ -+static int -+ar2315_wdt_release(struct inode *inode, struct file *file) -+{ -+ in_use = 0; -+ return 0; -+} -+ -+static irqreturn_t -+ar2315_wdt_interrupt(int irq, void *dev) -+{ -+ struct platform_device *pdev = (struct platform_device *)dev; -+ -+ if (started) { -+ dev_crit(&pdev->dev, "watchdog expired, rebooting system\n"); -+ emergency_restart(); -+ } else { -+ ar2315_wdt_wr(WDT_REG_CTRL, 0); -+ ar2315_wdt_wr(WDT_REG_TIMER, 0); -+ } -+ return IRQ_HANDLED; -+} -+ -+static struct watchdog_info ident = { -+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, -+ .identity = "ar2315 Watchdog", -+}; -+ -+static long -+ar2315_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int new_wdt_timeout; -+ int ret = -ENOIOCTLCMD; -+ -+ switch (cmd) { -+ case WDIOC_GETSUPPORT: -+ ret = copy_to_user((void __user *)arg, &ident, sizeof(ident)) ? -+ -EFAULT : 0; -+ break; -+ case WDIOC_KEEPALIVE: -+ ar2315_wdt_enable(); -+ ret = 0; -+ break; -+ case WDIOC_SETTIMEOUT: -+ ret = get_user(new_wdt_timeout, (int __user *)arg); -+ if (ret) -+ break; -+ wdt_timeout = HEARTBEAT(new_wdt_timeout); -+ ar2315_wdt_enable(); -+ break; -+ case WDIOC_GETTIMEOUT: -+ ret = put_user(wdt_timeout, (int __user *)arg); -+ break; -+ } -+ return ret; -+} -+ -+static const struct file_operations ar2315_wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .write = ar2315_wdt_write, -+ .unlocked_ioctl = ar2315_wdt_ioctl, -+ .open = ar2315_wdt_open, -+ .release = ar2315_wdt_release, -+}; -+ -+static struct miscdevice ar2315_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &ar2315_wdt_fops, -+}; -+ -+static int -+ar2315_wdt_probe(struct platform_device *dev) -+{ -+ struct resource *mem_res, *irq_res; -+ int ret = 0; -+ -+ if (wdt_base) -+ return -EBUSY; -+ -+ irq_res = platform_get_resource(dev, IORESOURCE_IRQ, 0); -+ if (!irq_res) { -+ dev_err(&dev->dev, "no IRQ resource\n"); -+ return -ENOENT; -+ } -+ -+ mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); -+ wdt_base = devm_ioremap_resource(&dev->dev, mem_res); -+ if (IS_ERR(wdt_base)) -+ return PTR_ERR(wdt_base); -+ -+ ret = devm_request_irq(&dev->dev, irq_res->start, ar2315_wdt_interrupt, -+ 0, DRIVER_NAME, dev); -+ if (ret) { -+ dev_err(&dev->dev, "failed to register inetrrupt\n"); -+ goto out; -+ } -+ -+ ret = misc_register(&ar2315_wdt_miscdev); -+ if (ret) -+ dev_err(&dev->dev, "failed to register miscdev\n"); -+ -+out: -+ return ret; -+} -+ -+static int -+ar2315_wdt_remove(struct platform_device *dev) -+{ -+ misc_deregister(&ar2315_wdt_miscdev); -+ return 0; -+} -+ -+static struct platform_driver ar2315_wdt_driver = { -+ .probe = ar2315_wdt_probe, -+ .remove = ar2315_wdt_remove, -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(ar2315_wdt_driver); -+ -+MODULE_DESCRIPTION("Atheros AR2315 hardware watchdog driver"); -+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:" DRIVER_NAME); ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -1832,6 +1832,13 @@ config PIC32_DMT - To compile this driver as a loadable module, choose M here. - The module will be called pic32-dmt. - -+config AR2315_WDT -+ tristate "Atheros AR2315+ WiSoCs Watchdog Timer" -+ depends on ATH25 -+ help -+ Hardware driver for the built-in watchdog timer on the Atheros -+ AR2315/AR2316 WiSoCs. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -161,6 +161,7 @@ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o - obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o -+obj-$(CONFIG_AR2315_WDT) += ar2315-wtd.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o - obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o - octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o ---- a/arch/mips/ath25/ar2315.c -+++ b/arch/mips/ath25/ar2315.c -@@ -220,6 +220,24 @@ static struct platform_device ar2315_gpi - .num_resources = ARRAY_SIZE(ar2315_gpio_res) - }; - -+static struct resource ar2315_wdt_res[] = { -+ { -+ .flags = IORESOURCE_MEM, -+ .start = AR2315_RST_BASE + AR2315_WDT_TIMER, -+ .end = AR2315_RST_BASE + AR2315_WDT_TIMER + 8 - 1, -+ }, -+ { -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct platform_device ar2315_wdt = { -+ .id = 0, -+ .name = "ar2315-wdt", -+ .resource = ar2315_wdt_res, -+ .num_resources = ARRAY_SIZE(ar2315_wdt_res) -+}; -+ - static struct resource ar2315_spiflash_res[] = { - { - .name = "spiflash_read", -@@ -252,6 +270,11 @@ void __init ar2315_init_devices(void) - ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; - platform_device_register(&ar2315_gpio); - -+ ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain, -+ AR2315_MISC_IRQ_WATCHDOG); -+ ar2315_wdt_res[1].end = ar2315_wdt_res[1].start; -+ platform_device_register(&ar2315_wdt); -+ - platform_device_register(&ar2315_spiflash); - - ar2315_eth_data.macaddr = ath25_board.config->enet0_mac; diff --git a/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch b/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch deleted file mode 100644 index 81b23e863e..0000000000 --- a/target/linux/ath25/patches-5.4/140-redboot_boardconfig.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/drivers/mtd/parsers/redboot.c -+++ b/drivers/mtd/parsers/redboot.c -@@ -16,6 +16,8 @@ - #include <linux/mtd/partitions.h> - #include <linux/module.h> - -+#define BOARD_CONFIG_PART "boardconfig" -+ - struct fis_image_desc { - unsigned char name[16]; // Null terminated name - uint32_t flash_base; // Address within FLASH of image -@@ -72,6 +74,7 @@ static int parse_redboot_partitions(stru - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { -+ unsigned long max_offset = 0; - int nrparts = 0; - struct fis_image_desc *buf; - struct mtd_partition *parts; -@@ -239,14 +242,15 @@ static int parse_redboot_partitions(stru - } - } - #endif -- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL); -+ parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + -+ sizeof(BOARD_CONFIG_PART), GFP_KERNEL); - - if (!parts) { - ret = -ENOMEM; - goto out; - } - -- nullname = (char *)&parts[nrparts]; -+ nullname = (char *)&parts[nrparts + 1]; - #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED - if (nulllen > 0) { - strcpy(nullname, nullstring); -@@ -265,6 +269,8 @@ static int parse_redboot_partitions(stru - } - #endif - for ( ; i<nrparts; i++) { -+ if (max_offset < buf[i].flash_base + buf[i].size) -+ max_offset = buf[i].flash_base + buf[i].size; - parts[i].size = fl->img->size; - parts[i].offset = fl->img->flash_base; - parts[i].name = names; -@@ -298,6 +304,13 @@ static int parse_redboot_partitions(stru - fl = fl->next; - kfree(tmp_fl); - } -+ if (master->size - max_offset >= master->erasesize) { -+ parts[nrparts].size = master->size - max_offset; -+ parts[nrparts].offset = max_offset; -+ parts[nrparts].name = names; -+ strcpy(names, BOARD_CONFIG_PART); -+ nrparts++; -+ } - ret = nrparts; - *pparts = parts; - out: diff --git a/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch b/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch deleted file mode 100644 index 343eedc075..0000000000 --- a/target/linux/ath25/patches-5.4/141-redboot_partition_scan.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/mtd/parsers/redboot.c -+++ b/drivers/mtd/parsers/redboot.c -@@ -93,12 +93,18 @@ static int parse_redboot_partitions(stru - - parse_redboot_of(master); - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; - while (mtd_block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; -@@ -111,10 +117,6 @@ static int parse_redboot_partitions(stru - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; - - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); -@@ -187,6 +189,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch b/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch deleted file mode 100644 index 55cf84eeff..0000000000 --- a/target/linux/ath25/patches-5.4/142-redboot_various_erase_size_fix.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/drivers/mtd/parsers/redboot.c -+++ b/drivers/mtd/parsers/redboot.c -@@ -70,6 +70,22 @@ static void parse_redboot_of(struct mtd_ - directory = dirblock; - } - -+static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset) -+{ -+ struct mtd_erase_region_info *regions = mtd->eraseregions; -+ int i; -+ -+ for (i = 0; i < mtd->numeraseregions; i++) { -+ if (regions[i].offset + -+ regions[i].numblocks * regions[i].erasesize <= offset) -+ continue; -+ -+ return regions[i].erasesize; -+ } -+ -+ return mtd->erasesize; -+} -+ - static int parse_redboot_partitions(struct mtd_info *master, - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -86,6 +102,7 @@ static int parse_redboot_partitions(stru - int namelen = 0; - int nulllen = 0; - int numslots; -+ int first_slot; - unsigned long offset; - #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED - static char nullstring[] = "unallocated"; -@@ -200,7 +217,10 @@ static int parse_redboot_partitions(stru - goto out; - } - -- for (i = 0; i < numslots; i++) { -+ first_slot = (buf[i].flash_base & (master->erasesize - 1)) / -+ sizeof(struct fis_image_desc); -+ -+ for (i = first_slot; i < first_slot + numslots; i++) { - struct fis_list *new_fl, **prev; - - if (buf[i].name[0] == 0xff) { -@@ -276,12 +296,13 @@ static int parse_redboot_partitions(stru - } - #endif - for ( ; i<nrparts; i++) { -- if (max_offset < buf[i].flash_base + buf[i].size) -- max_offset = buf[i].flash_base + buf[i].size; - parts[i].size = fl->img->size; - parts[i].offset = fl->img->flash_base; - parts[i].name = names; - -+ if (max_offset < parts[i].offset + parts[i].size) -+ max_offset = parts[i].offset + parts[i].size; -+ - strcpy(names, fl->img->name); - #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY - if (!memcmp(names, "RedBoot", 8) || -@@ -311,7 +332,9 @@ static int parse_redboot_partitions(stru - fl = fl->next; - kfree(tmp_fl); - } -- if (master->size - max_offset >= master->erasesize) { -+ -+ if (master->size - max_offset >= -+ mtd_get_offset_erasesize(master, max_offset)) { - parts[nrparts].size = master->size - max_offset; - parts[nrparts].offset = max_offset; - parts[nrparts].name = names; diff --git a/target/linux/ath25/patches-5.4/210-reset_button.patch b/target/linux/ath25/patches-5.4/210-reset_button.patch deleted file mode 100644 index b3f7a14cda..0000000000 --- a/target/linux/ath25/patches-5.4/210-reset_button.patch +++ /dev/null @@ -1,71 +0,0 @@ ---- a/arch/mips/ath25/Makefile -+++ b/arch/mips/ath25/Makefile -@@ -8,7 +8,7 @@ - # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> - # - --obj-y += board.o prom.o devices.o -+obj-y += board.o prom.o devices.o reset.o - - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - ---- /dev/null -+++ b/arch/mips/ath25/reset.c -@@ -0,0 +1,57 @@ -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/platform_device.h> -+#include <linux/gpio_keys.h> -+#include <linux/input.h> -+#include <ath25_platform.h> -+#include "devices.h" -+ -+static int __init -+ar231x_init_reset(void) -+{ -+ struct platform_device *pdev; -+ struct gpio_keys_platform_data pdata; -+ struct gpio_keys_button *p; -+ int err; -+ -+ if (ath25_board.config->reset_config_gpio == 0xffff) -+ return -ENODEV; -+ -+ p = kzalloc(sizeof(*p), GFP_KERNEL); -+ if (!p) -+ goto err; -+ -+ p->desc = "reset"; -+ p->type = EV_KEY; -+ p->code = KEY_RESTART; -+ p->debounce_interval = 60; -+ p->gpio = ath25_board.config->reset_config_gpio; -+ -+ memset(&pdata, 0, sizeof(pdata)); -+ pdata.poll_interval = 20; -+ pdata.buttons = p; -+ pdata.nbuttons = 1; -+ -+ pdev = platform_device_alloc("gpio-keys-polled", 0); -+ if (!pdev) -+ goto err_free; -+ -+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); -+ if (err) -+ goto err_put_pdev; -+ -+ err = platform_device_add(pdev); -+ if (err) -+ goto err_put_pdev; -+ -+ return 0; -+ -+err_put_pdev: -+ platform_device_put(pdev); -+err_free: -+ kfree(p); -+err: -+ return -ENOMEM; -+} -+ -+device_initcall(ar231x_init_reset); diff --git a/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch b/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch deleted file mode 100644 index 9051e1b466..0000000000 --- a/target/linux/ath25/patches-5.4/220-enet_micrel_workaround.patch +++ /dev/null @@ -1,111 +0,0 @@ ---- a/drivers/net/ethernet/atheros/ar231x/ar231x.c -+++ b/drivers/net/ethernet/atheros/ar231x/ar231x.c -@@ -135,6 +135,7 @@ static int ar231x_mdiobus_write(struct m - static int ar231x_mdiobus_reset(struct mii_bus *bus); - static int ar231x_mdiobus_probe(struct net_device *dev); - static void ar231x_adjust_link(struct net_device *dev); -+static bool no_phy; - - #ifndef ERR - #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) -@@ -167,6 +168,32 @@ static const struct net_device_ops ar231 - #endif - }; - -+static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) -+{ -+ int phy_reg; -+ -+ /** -+ * Grab the bits from PHYIR1, and put them -+ * in the upper half. -+ */ -+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); -+ -+ if (phy_reg < 0) -+ return -EIO; -+ -+ *phy_id = (phy_reg & 0xffff) << 16; -+ -+ /* Grab the bits from PHYIR2, and put them in the lower half */ -+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); -+ -+ if (phy_reg < 0) -+ return -EIO; -+ -+ *phy_id |= (phy_reg & 0xffff); -+ -+ return 0; -+} -+ - static int ar231x_probe(struct platform_device *pdev) - { - struct net_device *dev; -@@ -274,6 +301,24 @@ static int ar231x_probe(struct platform_ - - mdiobus_register(sp->mii_bus); - -+ /** -+ * Workaround for Micrel switch, which is only available on -+ * one PHY and cannot be configured through MDIO. -+ */ -+ if (!no_phy) { -+ u32 phy_id = 0; -+ -+ get_phy_id(sp->mii_bus, 1, &phy_id); -+ if (phy_id == 0x00221450) -+ no_phy = true; -+ } -+ if (no_phy) { -+ sp->link = 1; -+ netif_carrier_on(dev); -+ return 0; -+ } -+ no_phy = true; -+ - if (ar231x_mdiobus_probe(dev) != 0) { - printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name); - rx_tasklet_cleanup(dev); -@@ -327,8 +372,10 @@ static int ar231x_remove(struct platform - rx_tasklet_cleanup(dev); - ar231x_init_cleanup(dev); - unregister_netdev(dev); -- mdiobus_unregister(sp->mii_bus); -- mdiobus_free(sp->mii_bus); -+ if (sp->mii_bus) { -+ mdiobus_unregister(sp->mii_bus); -+ mdiobus_free(sp->mii_bus); -+ } - kfree(dev); - return 0; - } -@@ -871,7 +918,8 @@ static int ar231x_open(struct net_device - - sp->eth_regs->mac_control |= MAC_CONTROL_RE; - -- phy_start(sp->phy_dev); -+ if (sp->phy_dev) -+ phy_start(sp->phy_dev); - - return 0; - } -@@ -952,7 +1000,8 @@ static int ar231x_close(struct net_devic - - #endif - -- phy_stop(sp->phy_dev); -+ if (sp->phy_dev) -+ phy_stop(sp->phy_dev); - - return 0; - } -@@ -996,6 +1045,9 @@ static int ar231x_ioctl(struct net_devic - { - struct ar231x_private *sp = netdev_priv(dev); - -+ if (!sp->phy_dev) -+ return -ENODEV; -+ - switch (cmd) { - case SIOCGMIIPHY: - case SIOCGMIIREG: diff --git a/target/linux/ath25/patches-5.4/330-board_leds.patch b/target/linux/ath25/patches-5.4/330-board_leds.patch deleted file mode 100644 index e357fc6a64..0000000000 --- a/target/linux/ath25/patches-5.4/330-board_leds.patch +++ /dev/null @@ -1,116 +0,0 @@ ---- a/arch/mips/ath25/ar2315.c -+++ b/arch/mips/ath25/ar2315.c -@@ -23,6 +23,7 @@ - #include <linux/reboot.h> - #include <linux/delay.h> - #include <linux/gpio.h> -+#include <linux/leds.h> - #include <asm/bootinfo.h> - #include <asm/reboot.h> - #include <asm/time.h> -@@ -260,6 +261,50 @@ static struct platform_device ar2315_spi - .num_resources = ARRAY_SIZE(ar2315_spiflash_res) - }; - -+#ifdef CONFIG_LEDS_GPIO -+static struct gpio_led ar2315_leds[6]; -+static struct gpio_led_platform_data ar2315_led_data = { -+ .leds = (void *)ar2315_leds, -+}; -+ -+static struct platform_device ar2315_gpio_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = (void *)&ar2315_led_data, -+ } -+}; -+ -+static void __init ar2315_init_gpio_leds(void) -+{ -+ static char led_names[6][6]; -+ int i, led = 0; -+ -+ ar2315_led_data.num_leds = 0; -+ for (i = 1; i < 8; i++) { -+ if ((i == AR2315_RESET_GPIO) || -+ (i == ath25_board.config->reset_config_gpio)) -+ continue; -+ -+ if (i == ath25_board.config->sys_led_gpio) -+ strcpy(led_names[led], "wlan"); -+ else -+ sprintf(led_names[led], "gpio%d", i); -+ -+ ar2315_leds[led].name = led_names[led]; -+ ar2315_leds[led].gpio = i; -+ ar2315_leds[led].active_low = 0; -+ led++; -+ } -+ ar2315_led_data.num_leds = led; -+ platform_device_register(&ar2315_gpio_leds); -+} -+#else -+static inline void ar2315_init_gpio_leds(void) -+{ -+} -+#endif -+ - void __init ar2315_init_devices(void) - { - /* Find board configuration */ -@@ -270,6 +315,8 @@ void __init ar2315_init_devices(void) - ar2315_gpio_res[1].end = ar2315_gpio_res[1].start; - platform_device_register(&ar2315_gpio); - -+ ar2315_init_gpio_leds(); -+ - ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain, - AR2315_MISC_IRQ_WATCHDOG); - ar2315_wdt_res[1].end = ar2315_wdt_res[1].start; ---- a/arch/mips/ath25/ar5312.c -+++ b/arch/mips/ath25/ar5312.c -@@ -23,6 +23,7 @@ - #include <linux/mtd/physmap.h> - #include <linux/reboot.h> - #include <linux/gpio.h> -+#include <linux/leds.h> - #include <asm/bootinfo.h> - #include <asm/reboot.h> - #include <asm/time.h> -@@ -231,6 +232,23 @@ static struct platform_device ar5312_gpi - .num_resources = ARRAY_SIZE(ar5312_gpio_res), - }; - -+#ifdef CONFIG_LEDS_GPIO -+static struct gpio_led ar5312_leds[] = { -+ { .name = "wlan", .gpio = 0, .active_low = 1, }, -+}; -+ -+static const struct gpio_led_platform_data ar5312_led_data = { -+ .num_leds = ARRAY_SIZE(ar5312_leds), -+ .leds = (void *)ar5312_leds, -+}; -+ -+static struct platform_device ar5312_gpio_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev.platform_data = (void *)&ar5312_led_data, -+}; -+#endif -+ - static void __init ar5312_flash_init(void) - { - void __iomem *flashctl_base; -@@ -301,6 +319,11 @@ void __init ar5312_init_devices(void) - - platform_device_register(&ar5312_gpio); - -+#ifdef CONFIG_LEDS_GPIO -+ ar5312_leds[0].gpio = config->sys_led_gpio; -+ platform_device_register(&ar5312_gpio_leds); -+#endif -+ - /* Fix up MAC addresses if necessary */ - if (is_broadcast_ether_addr(config->enet0_mac)) - ether_addr_copy(config->enet0_mac, config->enet1_mac); diff --git a/target/linux/ath25/patches-5.4/700-swconfig_mvswitch.patch b/target/linux/ath25/patches-5.4/700-swconfig_mvswitch.patch deleted file mode 100644 index 7f2c082432..0000000000 --- a/target/linux/ath25/patches-5.4/700-swconfig_mvswitch.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -284,6 +284,10 @@ config IP17XX_PHY - tristate "Driver for IC+ IP17xx switches" - select SWCONFIG - -+config MVSWITCH_PHY -+ tristate "Driver for Marvell 88E6060 switches" -+ select ETHERNET_PACKET_MANGLE -+ - config PSB6970_PHY - tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch" - select SWCONFIG ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -27,6 +27,7 @@ obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o - obj-$(CONFIG_SWCONFIG_B53) += b53/ - obj-$(CONFIG_IP17XX_PHY) += ip17xx.o -+obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o - obj-$(CONFIG_PSB6970_PHY) += psb6970.o - obj-$(CONFIG_RTL8306_PHY) += rtl8306.o - obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o |