diff options
author | Volodymyr Puiul <volodymyr.puiul@gmail.com> | 2022-10-20 00:05:16 +0400 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-10-30 23:14:45 +0100 |
commit | 3d14c610e8cdbc16c14d6407a206c44a35d275e7 (patch) | |
tree | faceb6311e2edf3b6997999ec2093638a54fb783 /target/linux/at91 | |
parent | cc8b8f1b41ad2dadff4c95b8629c249b04846168 (diff) | |
download | upstream-3d14c610e8cdbc16c14d6407a206c44a35d275e7.tar.gz upstream-3d14c610e8cdbc16c14d6407a206c44a35d275e7.tar.bz2 upstream-3d14c610e8cdbc16c14d6407a206c44a35d275e7.zip |
ramips: add support for YunCore FAP640
It is an in-wall 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A.
Specifications:
- SoC: MT7621AT (880MHz, 2 Cores)
- RAM: 128 MB
- Flash: 16 MB SPI
- Wi-Fi:
- MT7915DN + MT7905DAN: 2.4/5 GHz
- Ethernet: 5x1GiE via MT7530, 1xWAN with POE and 4xLAN
- UART: J4 (115200 baud)
- Pinout: [3V3] (TXD) (RXD) (GND)
- Power: 802.11af/at PoE;
- Bootloader: U-Boot
- Buttons:
- Reset
- LEDs:
- Status - RGB controlled by
- GPIO 14 LOW - green color
- GPIO 15 LOW- red color
- GPIO 16 LOW - blue color
- WAN - gren color, controlled by switch GPIO 12 LOW
- LAN1 - gren color, controlled by switch GPIO 9 HIGH
- LAN2 - gren color, controlled by switch GPIO 6 LOW
- LAN3 - gren color, controlled by switch GPIO 3 LOW
- LAN4 - gren color, controlled by switch GPIO 0 LOW
Installation:
OEM firmware is based on LEDE with custom UI and support standard sysupgrade
variant of firmware. However it requires "*.ubin" extension for sysupgrade file.
Always select "Factory reset" switch on upgrade to OpenWRT, otherwise
router will not boot.
MAC addresses with OEM firmware:
vendor source
lan factory 0x4 (label)
5g factory 0x4 (label)
2g label with flipped bits bit in 1-st byte and bits 5, 6, 7 in
4-th byte
Example
label: 44:xx:xx:b7:xx:xx
lan: 44:xx:xx:b7:xx:xx
2g 46:xx:xx:c7:xx:xx
5g 44:xx:xx:b7:xx:xx
Signed-off-by: Volodymyr Puiul <volodymyr.puiul@gmail.com>
Diffstat (limited to 'target/linux/at91')
0 files changed, 0 insertions, 0 deletions