at91: Remove u-boot from platform images folder

Removes the bootloader from the images section as its now in packages/boot
with the others.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

7 files changed, 0 insertions, 836 deletions

diff --git a/target/linux/at91/image/Config.in b/target/linux/at91/image/Config.in
index 54a501dcb3..596accaa49 100644
--- a/target/linux/at91/image/Config.in
+++ b/target/linux/at91/image/Config.in
@@ -3,33 +3,6 @@ config AT91_DFBOOT
 	depends on TARGET_at91
 	default n
 
-config AT91_UBOOT
-	bool "Build U-Boot bootloader"
-	depends on TARGET_at91
-	default n
-
-config UBOOT_TARGET
-	string "U-Boot target board"
-	depends on AT91_UBOOT
-	default "netusg20"
-	help
-	  For all supported boards there are ready-to-use default
-		configurations available; just type "<board_name>".
-
-config UBOOT_IPADDR
-	string "IP Address for U-Boot"
-	depends on AT91_UBOOT
-	default "192.168.0.178"
-	help
-	  IP address of device to be used in U-Boot
-
-config UBOOT_SERVERIP
-	string "IP Address of TFTP server"
-	depends on AT91_UBOOT
-	default "192.168.0.232"
-	help
-	  IP address of TFTP server for U-Boot
-
 config FLEXIBITY_ROOT
 	bool "Build Flexibity RootFS (with embedded kernel)"
 	depends on TARGET_at91_flexibity
diff --git a/target/linux/at91/image/Makefile b/target/linux/at91/image/Makefile
index 767255ca3f..0a4c95de7f 100644
--- a/target/linux/at91/image/Makefile
+++ b/target/linux/at91/image/Makefile
@@ -13,16 +13,6 @@ UBI_OPTS = -m 2048 -p 128KiB -s 512
 AT91SAMA5D3XPLAINED_UBIFS_OPTS = -m 2048 -e 124KiB -c 2048
 AT91SAMA5D3XPLAINED_UBI_OPTS = -m 2048 -p 128KiB -s 2048
 
-define Build/Clean
-	$(MAKE) -C u-boot clean
-endef
-
-define Build/Compile
-	if [ $(CONFIG_AT91_UBOOT) ]; then \
-		$(MAKE) -C u-boot compile; \
-	fi
-endef
-
 define Image/Prepare
 	cp $(LINUX_DIR)/arch/arm/boot/Image $(KDIR)/Image
 	cp $(LINUX_DIR)/arch/arm/boot/zImage $(KDIR)/zImage
diff --git a/target/linux/at91/image/u-boot/Makefile b/target/linux/at91/image/u-boot/Makefile
deleted file mode 100644
index 1d1b31455a..0000000000
--- a/target/linux/at91/image/u-boot/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=u-boot
-PKG_VERSION:=2010.06
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=
-PKG_CAT:=bzcat
-
-include $(INCLUDE_DIR)/package.mk
-
-UBOOT_CONFIG=$(call qstrip,$(CONFIG_UBOOT_TARGET))
-LAN_IP=$(call qstrip,$(CONFIG_UBOOT_IPADDR))
-LAN_SERVERIP=$(call qstrip,$(CONFIG_UBOOT_SERVERIP))
-
-define Build/Compile
-	$(MAKE) -C $(PKG_BUILD_DIR) $(UBOOT_CONFIG)_config
-	export CROSS_COMPILE=$(TARGET_CROSS); \
-	export LAN_IP=$(LAN_IP); \
-	export LAN_SERVERIP=$(LAN_SERVERIP); \
-	$(MAKE) -C $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)/ubclient
-	$(CP) ./ubclient/* $(PKG_BUILD_DIR)/ubclient
-	export LAN_IP=$(LAN_IP); \
-	export LAN_SERVERIP=$(LAN_SERVERIP); \
-	#$(MAKE) -C $(PKG_BUILD_DIR)/ubclient \
-	#	$(TARGET_CONFIGURE_OPTS) \
-	#	CFLAGS="$(TARGET_CFLAGS) -Dtarget_$(BOARD)=1"
-endef
-
-define Build/InstallDev
-	dd if=$(PKG_BUILD_DIR)/u-boot.bin of=$(PKG_BUILD_DIR)/u-boot.block bs=232k count=1 conv=sync
-#	$(INSTALL_DIR) $(STAGING_DIR)/ubclient/sbin
-#	$(INSTALL_BIN) $(PKG_BUILD_DIR)/ubclient/ubpar $(STAGING_DIR)/ubclient/sbin/
-#	$(CP) $(PKG_BUILD_DIR)/ubclient/ubpar ../../base-files/sbin
-	mkdir -p $(BIN_DIR)/
-	cp $(PKG_BUILD_DIR)/u-boot.bin $(BIN_DIR)/u-boot.$(PKG_VERSION).bin
-endef
-
-$(eval $(call Build/DefaultTargets))
diff --git a/target/linux/at91/image/u-boot/patches/100-netusg20.patch b/target/linux/at91/image/u-boot/patches/100-netusg20.patch
deleted file mode 100644
index 127372e8f3..0000000000
--- a/target/linux/at91/image/u-boot/patches/100-netusg20.patch
+++ /dev/null
@@ -1,574 +0,0 @@
-Add support for the NetusG20 board by Acmesystems srl.
-This board is based on AT91SAM9G20 SoC.
-
-Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
----
- MAKEALL                                           |    1 +
- Makefile                                          |    3 +
- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
- board/acmesystems/netusg20/Makefile               |   56 +++++++
- board/acmesystems/netusg20/config.mk              |    1 +
- board/acmesystems/netusg20/led.c                  |   40 +++++
- board/acmesystems/netusg20/netusg20.c             |  152 +++++++++++++++++
- board/acmesystems/netusg20/partition.c            |   39 +++++
- include/configs/netusg20.h                        |  181 +++++++++++++++++++++
- 9 files changed, 478 insertions(+), 0 deletions(-)
- create mode 100644 board/acmesystems/netusg20/Makefile
- create mode 100644 board/acmesystems/netusg20/config.mk
- create mode 100644 board/acmesystems/netusg20/led.c
- create mode 100644 board/acmesystems/netusg20/netusg20.c
- create mode 100644 board/acmesystems/netusg20/partition.c
- create mode 100644 include/configs/netusg20.h
-
-diff --git a/MAKEALL b/MAKEALL
-index d6d5f5b..60e36e1 100755
---- a/MAKEALL
-+++ b/MAKEALL
-@@ -684,6 +684,7 @@ LIST_at91="			\
- 	meesc			\
- 	mp2usb			\
- 	m501sk			\
-+	netusg20		\
- 	otc570			\
- 	pm9261			\
- 	pm9263			\
-diff --git a/Makefile b/Makefile
-index 87d5214..b73659f 100644
---- a/Makefile
-+++ b/Makefile
-@@ -2867,6 +2867,9 @@ at91sam9g45ekes_config	:	unconfig
- 	fi;
- 	@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
- 
-+netusg20_config:	unconfig
-+	@$(MKCONFIG) $(@:_config=) arm arm926ejs netusg20 acmesystems at91
-+
- otc570_config	:	unconfig
- 	@$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
- 
-diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
-index 77d49ab..87ec531 100644
---- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
-+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c
-@@ -59,7 +59,12 @@ void at91_serial3_hw_init(void)
- {
- 	at91_pmc_t	*pmc	= (at91_pmc_t *) AT91_PMC_BASE;
- 
-+#ifdef CONFIG_NETUSG20
-+	/* pull-up active on DRXD*/
-+	at91_set_a_periph(AT91_PIO_PORTB, 14, 1);
-+#else
- 	at91_set_a_periph(AT91_PIO_PORTB, 14, 0);		/* DRXD */
-+#endif
- 	at91_set_a_periph(AT91_PIO_PORTB, 15, 1);		/* DTXD */
- 	writel(1 << AT91_ID_SYS, &pmc->pcer);
- }
-diff --git a/board/acmesystems/netusg20/Makefile b/board/acmesystems/netusg20/Makefile
-new file mode 100644
-index 0000000..31589fd
---- /dev/null
-+++ b/board/acmesystems/netusg20/Makefile
-@@ -0,0 +1,56 @@
-+#
-+# (C) Copyright 2003-2008
-+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-+#
-+# (C) Copyright 2008
-+# Stelian Pop <stelian.pop@leadtechdesign.com>
-+# Lead Tech Design <www.leadtechdesign.com>
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB	= $(obj)lib$(BOARD).a
-+
-+COBJS-y	+= netusg20.o
-+COBJS-y	+= led.o
-+COBJS-y	+= partition.o
-+
-+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-+OBJS	:= $(addprefix $(obj),$(COBJS-y))
-+SOBJS	:= $(addprefix $(obj),$(SOBJS))
-+
-+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+	rm -f $(SOBJS) $(OBJS)
-+
-+distclean:	clean
-+	rm -f $(LIB) core *.bak $(obj).depend
-+
-+#########################################################################
-+
-+# defines $(obj).depend target
-+include $(SRCTREE)/rules.mk
-+
-+sinclude $(obj).depend
-+
-+#########################################################################
-diff --git a/board/acmesystems/netusg20/config.mk b/board/acmesystems/netusg20/config.mk
-new file mode 100644
-index 0000000..ff2cfd1
---- /dev/null
-+++ b/board/acmesystems/netusg20/config.mk
-@@ -0,0 +1 @@
-+TEXT_BASE = 0x23f00000
-diff --git a/board/acmesystems/netusg20/led.c b/board/acmesystems/netusg20/led.c
-new file mode 100644
-index 0000000..1016b98
---- /dev/null
-+++ b/board/acmesystems/netusg20/led.c
-@@ -0,0 +1,40 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9260.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-+
-+
-+void coloured_LED_init(void)
-+{
-+	/* Enable clock */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA);
-+
-+	at91_set_gpio_output(CONFIG_RED_LED, 1);
-+
-+	at91_set_gpio_value(CONFIG_RED_LED, 1);
-+}
-diff --git a/board/acmesystems/netusg20/netusg20.c b/board/acmesystems/netusg20/netusg20.c
-new file mode 100644
-index 0000000..94b4d4c
---- /dev/null
-+++ b/board/acmesystems/netusg20/netusg20.c
-@@ -0,0 +1,152 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * (C) Copyright 2010
-+ * Claudio Mignanti <c.mignanti@gmail.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/arch/at91sam9260.h>
-+#include <asm/arch/at91sam9260_matrix.h>
-+#include <asm/arch/at91sam9_smc.h>
-+#include <asm/arch/at91_common.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/io.h>
-+#include <asm/arch/hardware.h>
-+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-+#include <net.h>
-+#endif
-+#include <netdev.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+/* ------------------------------------------------------------------------- */
-+/*
-+ * Miscelaneous platform dependent initialisations
-+ */
-+
-+#ifdef CONFIG_MACB
-+static void at91sam9260ek_macb_hw_init(void)
-+{
-+	unsigned long rstc;
-+
-+	/* Enable clock */
-+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
-+
-+	/*
-+	 * Disable pull-up on:
-+	 *	RXDV (PA17) => PHY normal mode (not Test mode)
-+	 *	ERX0 (PA14) => PHY ADDR0
-+	 *	ERX1 (PA15) => PHY ADDR1
-+	 *	ERX2 (PA25) => PHY ADDR2
-+	 *	ERX3 (PA26) => PHY ADDR3
-+	 *	ECRS (PA28) => PHY ADDR4  => PHYADDR = 0x0
-+	 *
-+	 * PHY has internal pull-down
-+	 */
-+	writel(pin_to_mask(AT91_PIN_PA14) |
-+	       pin_to_mask(AT91_PIN_PA15) |
-+	       pin_to_mask(AT91_PIN_PA17) |
-+	       pin_to_mask(AT91_PIN_PA25) |
-+	       pin_to_mask(AT91_PIN_PA26) |
-+	       pin_to_mask(AT91_PIN_PA28),
-+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-+
-+	rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
-+
-+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-+
-+	/* Wait for end hardware reset */
-+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-+
-+	/* Restore NRST value */
-+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
-+				     (rstc) |
-+				     AT91_RSTC_URSTEN);
-+
-+	/* Re-enable pull-up */
-+	writel(pin_to_mask(AT91_PIN_PA14) |
-+	       pin_to_mask(AT91_PIN_PA15) |
-+	       pin_to_mask(AT91_PIN_PA17) |
-+	       pin_to_mask(AT91_PIN_PA25) |
-+	       pin_to_mask(AT91_PIN_PA26) |
-+	       pin_to_mask(AT91_PIN_PA28),
-+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-+
-+	at91_macb_hw_init();
-+}
-+#endif
-+
-+int board_init(void)
-+{
-+	/* Enable Ctrlc */
-+	console_init_f();
-+
-+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
-+
-+	/* adress of boot parameters */
-+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-+
-+	at91_serial_hw_init();
-+#ifdef CONFIG_HAS_DATAFLASH
-+	at91_spi0_hw_init((1 << 0) | (1 << 1));
-+#endif
-+#ifdef CONFIG_MACB
-+	at91sam9260ek_macb_hw_init();
-+#endif
-+
-+	return 0;
-+}
-+
-+int dram_init(void)
-+{
-+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-+	return 0;
-+}
-+
-+#ifdef CONFIG_RESET_PHY_R
-+void reset_phy(void)
-+{
-+#ifdef CONFIG_MACB
-+	/*
-+	 * Initialize ethernet HW addr prior to starting Linux,
-+	 * needed for nfsroot
-+	 */
-+	eth_init(gd->bd);
-+#endif
-+}
-+#endif
-+
-+int board_eth_init(bd_t *bis)
-+{
-+	int rc = 0;
-+#ifdef CONFIG_MACB
-+	rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
-+#endif
-+	return rc;
-+}
-+
-+void show_boot_progress (int val){}
-diff --git a/board/acmesystems/netusg20/partition.c b/board/acmesystems/netusg20/partition.c
-new file mode 100644
-index 0000000..7d79e53
---- /dev/null
-+++ b/board/acmesystems/netusg20/partition.c
-@@ -0,0 +1,39 @@
-+/*
-+ * (C) Copyright 2008
-+ * Ulf Samuelsson <ulf@atmel.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ */
-+#include <common.h>
-+#include <config.h>
-+#include <asm/hardware.h>
-+#include <dataflash.h>
-+
-+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-+
-+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-+	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1, 1}
-+};
-+
-+/*define the area offsets*/
-+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
-+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-+	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
-+	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
-+	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
-+};
-diff --git a/include/configs/netusg20.h b/include/configs/netusg20.h
-new file mode 100644
-index 0000000..99b4f12
---- /dev/null
-+++ b/include/configs/netusg20.h
-@@ -0,0 +1,181 @@
-+/*
-+ * (C) Copyright 2007-2008
-+ * Stelian Pop <stelian.pop@leadtechdesign.com>
-+ * Lead Tech Design <www.leadtechdesign.com>
-+ *
-+ * Configuation settings for the NetusG20 boards.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#define CONFIG_AT91_LEGACY
-+
-+/* ARM asynchronous clock */
-+#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz crystal */
-+#define CONFIG_SYS_HZ		1000
-+
-+#define CONFIG_DISPLAY_CPUINFO
-+
-+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
-+#define CONFIG_AT91SAM9G20	1	/* It's an Atmel AT91SAM9G20 SoC*/
-+#define CONFIG_NETUSG20	1
-+
-+#define CONFIG_ARCH_CPU_INIT
-+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-+
-+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_INITRD_TAG	1
-+
-+#define CONFIG_SKIP_LOWLEVEL_INIT
-+#define CONFIG_SKIP_RELOCATE_UBOOT
-+
-+/*
-+ * Hardware drivers
-+ */
-+#define CONFIG_AT91_GPIO	1
-+#define CONFIG_ATMEL_USART	1
-+#undef CONFIG_USART0
-+#undef CONFIG_USART1
-+#undef CONFIG_USART2
-+#define CONFIG_USART3		1	/* USART 3 is DBGU */
-+
-+/* LED */
-+#define CONFIG_AT91_LED
-+#define	CONFIG_RED_LED		AT91_PIN_PA9	/* this is the power led */
-+#define	CONFIG_GREEN_LED	AT91_PIN_PA6	/* this is the user led */
-+
-+#define CONFIG_BOOTDELAY	3
-+
-+/*
-+ * BOOTP options
-+ */
-+#define CONFIG_BOOTP_BOOTFILESIZE	1
-+#define CONFIG_BOOTP_BOOTPATH		1
-+#define CONFIG_BOOTP_GATEWAY		1
-+#define CONFIG_BOOTP_HOSTNAME		1
-+
-+/*
-+ * Command line configuration.
-+ */
-+#include <config_cmd_default.h>
-+#undef CONFIG_CMD_BDI
-+#undef CONFIG_CMD_FPGA
-+#undef CONFIG_CMD_IMI
-+#undef CONFIG_CMD_IMLS
-+#undef CONFIG_CMD_LOADS
-+#undef CONFIG_CMD_SOURCE
-+
-+#define CONFIG_CMD_PING		1
-+#define CONFIG_CMD_DHCP		1
-+#define CONFIG_CMD_USB		1
-+
-+/* SDRAM */
-+#define CONFIG_NR_DRAM_BANKS		1
-+#define PHYS_SDRAM			0x20000000
-+#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
-+
-+/* DataFlash */
-+#define CONFIG_ATMEL_DATAFLASH_SPI
-+#define CONFIG_HAS_DATAFLASH		1
-+#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
-+#define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
-+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1	0xD0000000	/* CS1 */
-+#define AT91_SPI_CLK			15000000
-+
-+#define DATAFLASH_TCSS			(0x22 << 16)
-+#define DATAFLASH_TCHS			(0x1 << 24)
-+
-+/* no NAND flash on this board*/
-+#define CONFIG_SYS_NO_FLASH
-+
-+/* Ethernet */
-+#define CONFIG_MACB			1
-+#define CONFIG_RMII			1
-+#define CONFIG_NET_MULTI		1
-+#define CONFIG_NET_RETRY_COUNT		20
-+#define CONFIG_RESET_PHY_R		1
-+
-+/* MMC */
-+#define CONFIG_MMC
-+#define CONFIG_CMD_MMC
-+#define CONFIG_ATMEL_MCI
-+#define CONFIG_CMD_AUTOSCRIPT
-+#define CONFIG_CMD_IMI
-+#define CONFIG_CMD_SOURCE
-+
-+#define MMCI_BASE						0xFFFA8000
-+
-+/* USB */
-+#define CONFIG_USB_ATMEL
-+#define CONFIG_USB_OHCI_NEW		1
-+#define CONFIG_DOS_PARTITION		1
-+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
-+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9260_UHP_BASE */
-+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9260"
-+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-+#define CONFIG_USB_STORAGE		1
-+
-+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
-+
-+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
-+#define CONFIG_SYS_MEMTEST_END			0x23e00000
-+
-+/* Filesystem */
-+#define CONFIG_CMD_FAT		1
-+#define CONFIG_CMD_EXT2		1
-+
-+/* bootstrap + u-boot + env + linux in dataflash on CS1 */
-+#define CONFIG_ENV_IS_IN_DATAFLASH	1
-+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400)
-+#define CONFIG_ENV_OFFSET		0x4200
-+#define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 + CONFIG_ENV_OFFSET)
-+#define CONFIG_ENV_SIZE		0x4200
-+#define CONFIG_BOOTCOMMAND	"mmc init; sleep 1; " \
-+                            "ext2load mmc 0 0x20000000 uImage; " \
-+                            "source 0x20000000"
-+#define CONFIG_BOOTARGS		"mem=64M console=ttyS0,115200 " \
-+                            "root=/dev/mmcblk0p1 rootwait"
-+
-+#define CONFIG_BAUDRATE		115200
-+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
-+
-+#define CONFIG_SYS_PROMPT		"U-Boot> "
-+#define CONFIG_SYS_CBSIZE		256
-+#define CONFIG_SYS_MAXARGS		16
-+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-+#define CONFIG_SYS_LONGHELP		1
-+#define CONFIG_CMDLINE_EDITING	1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
-+
-+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
-+
-+#ifdef CONFIG_USE_IRQ
-+#error CONFIG_USE_IRQ not supported
-+#endif
-+
-+#endif
--- 
-1.7.0.4
-
-
diff --git a/target/linux/at91/image/u-boot/patches/200-clock.patch b/target/linux/at91/image/u-boot/patches/200-clock.patch
deleted file mode 100644
index fbfb6415e6..0000000000
--- a/target/linux/at91/image/u-boot/patches/200-clock.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-The function get_mci_clk_rate is used inside atmel_mci driver
-but never defined. Fix this typo.
-
-Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>
----
- drivers/mmc/atmel_mci.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c
-index 3946ffe..628aac9 100644
---- a/drivers/mmc/atmel_mci.c
-+++ b/drivers/mmc/atmel_mci.c
-@@ -67,7 +67,7 @@ static void mci_set_mode(unsigned long hz, unsigned long blklen)
- 	unsigned long bus_hz;
- 	unsigned long clkdiv;
- 
--	bus_hz = get_mci_clk_rate();
-+	bus_hz = get_mck_clk_rate();
- 	clkdiv = (bus_hz / hz) / 2 - 1;
- 
- 	pr_debug("mmc: setting clock %lu Hz, block size %lu\n",
--- 
-1.7.0.4
-
diff --git a/target/linux/at91/image/u-boot/ubclient/Makefile b/target/linux/at91/image/u-boot/ubclient/Makefile
deleted file mode 100644
index f8ff67cd18..0000000000
--- a/target/linux/at91/image/u-boot/ubclient/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-
-all: ubpar
-
-crc32.c:
-	ln -s ../lib_generic/crc32.c ./
-
-%.o: %.c
-	$(CC) -I ../include $(CFLAGS) $(EXTRA_FLAGS) -DLAN_IP=$(LAN_IP) -DLAN_SERVERIP=$(LAN_SERVERIP) -c -o $@ $^
-
-ubpar: ubpar.o crc32.o
-	$(CC) -o $@ $^
-
-clean:
-	rm -f *.o ubpar
diff --git a/target/linux/at91/image/u-boot/ubclient/ubpar.c b/target/linux/at91/image/u-boot/ubclient/ubpar.c
deleted file mode 100644
index edc5b2cdbd..0000000000
--- a/target/linux/at91/image/u-boot/ubclient/ubpar.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * ubparams.c
- * 
- * Generate a u-boot parameter block with correct crc
- *
- * (C) 1007 Guthrie Consulting
- * hamish@prodigi.ch
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#ifndef __ASSEMBLY__
-#define __ASSEMBLY__
-#endif
-#define __ASM_STUB_PROCESSOR_H__
-#include <config.h>
-#undef __ASSEMBLY__
-#include <environment.h>
-
-#define XMK_STR(x)  #x
-#define MK_STR(x)  XMK_STR(x)
-
-extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int);
-
-#if !defined(ENV_CRC)
-#define ENV_CRC ~0
-#endif
-
-#ifdef LAN_IP
-	#warning LAN_IP
-#else
-	#warning LAN_IP NOT DEFINED
-#endif
-#ifdef LAN_SERVERIP
-	#warning LAN_SERVERIP
-#else
-	#warning LAN_SERVERIP NOT DEFINED
-#endif
-
-static char *environment[] = {
-	"bootdelay=3\0"
-	"baudrate=115200\0"
-	"stdin=serial\0"
-	"stdout=serial\0"
-	"stderr=serial\0"
-	"fbargs=setenv bootargs root=/dev/mtdblock3 ro console=/dev/ttyS0,115200,mem=32M\0"
-	"rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 console=/dev/ttyS0,115200,mem=32M\0"
-	"rdram=run rdba; tftp 21000000 uImage; tftp 21200000 root.squashfs; bootm 21000000\0"
-	"flash=run fbargs; bootm 0xc0042000\0"
-	"bootargs=setenv bootargs root=/dev/mtdblock3 ro console=/dev/ttyS0,115200,mem=32M\0"
-	"bootcmd=bootm 0xc0042000\0"
-	"ipaddr=" MK_STR(LAN_IP) "\0"
-	"serverip=" MK_STR(LAN_SERVERIP) "\0"
-	"\0"
-	};
-
-int main(int argc, char *argv[]) {
-	env_t *envptr;
-	char *src, *srcptr;
-	char *dataptr;
-	FILE *params;
-	int argfail = 1;
-	char newmac[30];
-	char newser[30];
-	int paramlen = 0;
-	int progmac = 0;
-	int progser = 0;
-
-	if (argc < 3) {
-		printf ("Invalid arguments\n");
-		return 1;
-		}
-
-	switch (argc) {
-		case 5:
-			if (strcmp(argv[3], "--serial") == 0) {
-				argfail = 0;
-				sprintf(newser, "serial#=%s", argv[4]);
-				progser = 1;
-				}
-		case 3:
-			if (strcmp(argv[1], "--mac") == 0) {
-				argfail = 0;
-				sprintf(newmac, "ethaddr=%s", argv[2]);
-				progmac = 1;
-				}
-			else
-				argfail = 1;
-		}
-
-	if (argfail) {
-		printf("Invalid arguments\n");
-		return 1;
-		}
-
-
-	src = srcptr = *environment;
-	envptr = (env_t *)malloc(CFG_ENV_SIZE);
-	dataptr = (char *)envptr + ENV_HEADER_SIZE;
-
-	while(*srcptr) {
-		//printf("%d, %s\n", strlen(srcptr), srcptr);
-		paramlen += strlen(srcptr) + 1;
-		srcptr += strlen(srcptr) + 1;
-		}
-
-	printf("Make u-boot params\n");
-	printf("Params size is %d\n", CFG_ENV_SIZE);
-
-	memset(envptr, 0, CFG_ENV_SIZE);
-	memcpy(dataptr, src, paramlen);
-	dataptr += paramlen;
-
-	if (progmac) {
-		memcpy(dataptr, newmac, strlen(newmac));
-		dataptr += strlen(newmac) + 1;
-		}
-
-	if (progser) {
-		memcpy(dataptr, newser, strlen(newser));
-		dataptr += strlen(newser) + 1;
-		}
-
-	envptr->crc = crc32(0, envptr->data, ENV_SIZE);
-
-	params = fopen("/dev/mtd1", "w");
-	fwrite(envptr, CFG_ENV_SIZE, 1, params);
-	fclose(params);
-
-	free(envptr);
-	return 0;
-}