treewide: remove files for building 5.10 kernel

All targets are bumped to 5.15. Remove the old 5.10 patches, configs
and files using:

  find target/linux -iname '*-5.10' -exec rm -r {} \;

Further, remove the 5.10 include.

Signed-off-by: Nick Hainke <vincent@systemli.org>

1 files changed, 0 insertions, 93 deletions

diff --git a/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch b/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch
deleted file mode 100644
index bd7fb4e39e..0000000000
--- a/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 6075bbc75e55258a762d618cd459dbe0dd38aff9 Mon Sep 17 00:00:00 2001
-From: Claudiu Beznea <claudiu.beznea@microchip.com>
-Date: Thu, 30 Sep 2021 18:42:19 +0300
-Subject: [PATCH 231/247] ARM: at91: pm: preload base address of controllers in
- tlb
-
-In suspend/resume procedure for AT91 architecture different controllers
-(PMC, SHDWC, RAM, RAM PHY, SFRBU) are accessed to do the proper settings
-for power saving. Commit f0bbf17958e8 ("ARM: at91: pm: add self-refresh
-support for sama7g5") introduced the access to RAMC PHY controller for
-SAMA7G5. The access to this controller is done after RAMC ports are
-closed, thus any TLB walk necessary for RAMC PHY virtual address will
-fail. In the development branch this was not encountered. However, on
-current kernel the issue is reproducible.
-
-To solve the issue the previous mechanism of pre-loading the TLB with
-the RAMC PHY virtual address has been used. However, only the addition
-of this new pre-load breaks the functionality for ARMv5 based
-devices (SAM9X60). This behavior has been encountered previously
-while debugging this code and using the same mechanism for pre-loading
-address for different controllers (e.g. pin controller, the assumption
-being that other requested translations are replaced from TLB).
-
-To solve this new issue the TLB flush + the extension of pre-loading
-the rest of controllers to TLB (e.g. PMC, RAMC) has been added. The
-rest of the controllers should have been pre-loaded previously, anyway.
-
-Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5")
-Depends-on: e42cbbe5c9a2 ("ARM: at91: pm: group constants and addresses loading")
-Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
-Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
-Link: https://lore.kernel.org/r/20210930154219.2214051-4-claudiu.beznea@microchip.com
----
- arch/arm/mach-at91/pm_suspend.S | 25 ++++++++++++++++++++++++-
- 1 file changed, 24 insertions(+), 1 deletion(-)
-
---- a/arch/arm/mach-at91/pm_suspend.S
-+++ b/arch/arm/mach-at91/pm_suspend.S
-@@ -1014,6 +1014,10 @@ ENTRY(at91_pm_suspend_in_sram)
- 	mov	tmp1, #0
- 	mcr	p15, 0, tmp1, c7, c10, 4
- 
-+	/* Flush tlb. */
-+	mov	r4, #0
-+	mcr	p15, 0, r4, c8, c7, 0
-+
- 	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
- 	str	tmp1, .mckr_offset
- 	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
-@@ -1023,23 +1027,42 @@ ENTRY(at91_pm_suspend_in_sram)
- 	ldr	tmp1, [r0, #PM_DATA_MODE]
- 	str	tmp1, .pm_mode
- 
-+	/*
-+	 * ldrne below are here to preload their address in the TLB as access
-+	 * to RAM may be limited while in self-refresh.
-+	 */
- 	ldr	tmp1, [r0, #PM_DATA_PMC]
- 	str	tmp1, .pmc_base
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+
- 	ldr	tmp1, [r0, #PM_DATA_RAMC0]
- 	str	tmp1, .sramc_base
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+
- 	ldr	tmp1, [r0, #PM_DATA_RAMC1]
- 	str	tmp1, .sramc1_base
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+
-+#ifndef CONFIG_SOC_SAM_V4_V5
-+	/* ldrne below are here to preload their address in the TLB */
- 	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
- 	str	tmp1, .sramc_phy_base
--	/* Both ldrne below are here to preload their address in the TLB */
-+	cmp	tmp1, #0
-+	ldrne	tmp2, [tmp1, #0]
-+
- 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
- 	str	tmp1, .shdwc
- 	cmp	tmp1, #0
- 	ldrne	tmp2, [tmp1, #0]
-+
- 	ldr	tmp1, [r0, #PM_DATA_SFRBU]
- 	str	tmp1, .sfrbu
- 	cmp	tmp1, #0
- 	ldrne	tmp2, [tmp1, #0x10]
-+#endif
- 
- 	/* Active the self-refresh mode */
- 	at91_sramc_self_refresh_ena