strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

13 files changed, 0 insertions, 11825 deletions

diff --git a/target/linux/at91-2.6/patches-2.6.21/000-at91patches.patch b/target/linux/at91-2.6/patches-2.6.21/000-at91patches.patch
deleted file mode 100644
index 93fa2cf03c..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/000-at91patches.patch
+++ /dev/null
@@ -1,10312 +0,0 @@
-diff -urN -x CVS linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S
---- linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S	Tue May  8 12:13:30 2007
-@@ -67,6 +67,12 @@
- 		cmp	r7, r3
- 		beq	99f
- 
-+		@ Promwad Chub : 1181
-+		mov	r3,	#(MACH_TYPE_CHUB & 0xff)
-+		orr	r3, r3, #(MACH_TYPE_CHUB & 0xff00)
-+		cmp	r7, r3
-+		beq	99f
-+
- 		@ Unknown board, use the AT91RM9200DK board
- 		@ mov	r7, #MACH_TYPE_AT91RM9200
- 		mov	r7,	#(MACH_TYPE_AT91RM9200DK & 0xff)
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Kconfig linux-2.6-stable/arch/arm/mach-at91/Kconfig
---- linux-2.6.21/arch/arm/mach-at91/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/Kconfig	Wed May  9 10:20:54 2007
-@@ -17,6 +17,9 @@
- config ARCH_AT91SAM9263
- 	bool "AT91SAM9263"
- 
-+config ARCH_AT91SAM9RL
-+	bool "AT91SAM9RL"
-+
- endchoice
- 
- # ----------------------------------------------------------
-@@ -87,6 +90,12 @@
- 	help
- 	  Select this if you are using Sperry-Sun's KAFA board.
- 
-+config MACH_CHUB
-+	bool "Promwad Chub board"
-+	depends on ARCH_AT91RM9200
-+	help
-+	  Select this if you are using Promwad's Chub board.
-+
- endif
- 
- # ----------------------------------------------------------
-@@ -111,6 +120,13 @@
- 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
- 
-+config MACH_CAM60
-+	bool "KwikByte CAM60 board"
-+	depends on ARCH_AT91SAM9260
-+	help
-+	  Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260.
-+	  <http://www.kwikbyte.com>
-+
- endif
- 
- # ----------------------------------------------------------
-@@ -145,6 +161,20 @@
- 
- # ----------------------------------------------------------
- 
-+if ARCH_AT91SAM9RL
-+
-+comment "AT91SAM9RL Board Type"
-+
-+config MACH_AT91SAM9RLEK
-+	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-+	depends on ARCH_AT91SAM9RL
-+	help
-+	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-+
-+endif
-+
-+# ----------------------------------------------------------
-+
- comment "AT91 Board Options"
- 
- config MTD_AT91_DATAFLASH_CARD
-@@ -160,6 +190,20 @@
- 	  On AT91SAM926x boards both types of NAND flash can be present
- 	  (8 and 16 bit data bus width).
- 
-+config CSB300_WAKE_SW0
-+	bool "CSB300 SW0 irq0 wakeup"
-+	depends on MACH_CSB337 && PM
-+	help
-+	  If you have a CSB300 connected to your CSB337, this lets
-+	  SW0 serve as a wakeup button.  It uses IRQ0.
-+
-+config CSB300_WAKE_SW1
-+	bool "CSB300 SW1 gpio wakeup"
-+	depends on MACH_CSB337 && PM
-+	help
-+	  If you have a CSB300 connected to your CSB337, this lets
-+	  SW1 serve as a wakeup button.  It uses GPIO.
-+
- # ----------------------------------------------------------
- 
- comment "AT91 Feature Selections"
-@@ -170,6 +214,20 @@
- 	  Select this if you need to program one or more of the PCK0..PCK3
- 	  programmable clock outputs.
- 
-+config ATMEL_TCLIB
-+	bool "Timer/Counter Library"
-+	help
-+	  Select this if you want a library to allocate the Timer/Counter
-+	  blocks found on many Atmel processors.  This facilitates using
-+	  these modules despite processor differences.
-+
-+config AT91_SLOW_CLOCK
-+	bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)"
-+	depends on PM && EXPERIMENTAL
-+	help
-+	  Select this if you wish to put the CPU into slow clock mode
-+	  while in the "Suspend to RAM" state, to save more power.
-+
- endmenu
- 
- endif
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Makefile linux-2.6-stable/arch/arm/mach-at91/Makefile
---- linux-2.6.21/arch/arm/mach-at91/Makefile	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/Makefile	Wed May  9 12:37:19 2007
-@@ -8,12 +8,15 @@
- obj-		:=
- 
- obj-$(CONFIG_PM)		+= pm.o
-+obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
-+obj-$(CONFIG_ATMEL_TCLIB)	+= tclib.o
- 
- # CPU-specific support
- obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
- obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
-+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
- 
- # AT91RM9200 board-specific support
- obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
-@@ -25,9 +28,11 @@
- obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
- obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
- obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
-+obj-$(CONFIG_MACH_CHUB)		+= board-chub.o
- 
- # AT91SAM9260 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-+obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
- 
- # AT91SAM9261 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-@@ -35,9 +40,13 @@
- # AT91SAM9263 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
- 
-+# AT91SAM9RL board-specific support
-+obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
-+
- # LEDs support
- led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
- led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o
-+led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
- led-$(CONFIG_MACH_CSB337)	+= leds.o
- led-$(CONFIG_MACH_CSB637)	+= leds.o
- led-$(CONFIG_MACH_KB9200)	+= leds.o
-@@ -45,7 +54,7 @@
- obj-$(CONFIG_LEDS) += $(led-y)
- 
- # VGA support
--#obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
-+obj-$(CONFIG_FB_S1D13XXX)	+= ics1523.o
- 
- 
- ifeq ($(CONFIG_PM_DEBUG),y)
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c
---- linux-2.6.21/arch/arm/mach-at91/at91rm9200.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c	Tue May  8 12:13:30 2007
-@@ -117,6 +117,21 @@
- 	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
- 	.type		= CLK_TYPE_PERIPHERAL,
- };
-+static struct clk ssc0_clk = {
-+	.name		= "ssc0_clk",
-+	.pmc_mask	= 1 << AT91RM9200_ID_SSC0,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+	.name		= "ssc1_clk",
-+	.pmc_mask	= 1 << AT91RM9200_ID_SSC1,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc2_clk = {
-+	.name		= "ssc2_clk",
-+	.pmc_mask	= 1 << AT91RM9200_ID_SSC2,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
- static struct clk tc0_clk = {
- 	.name		= "tc0_clk",
- 	.pmc_mask	= 1 << AT91RM9200_ID_TC0,
-@@ -161,7 +176,9 @@
- 	&udc_clk,
- 	&twi_clk,
- 	&spi_clk,
--	// ssc 0 .. ssc2
-+	&ssc0_clk,
-+	&ssc1_clk,
-+	&ssc2_clk,
- 	&tc0_clk,
- 	&tc1_clk,
- 	&tc2_clk,
-@@ -250,6 +267,33 @@
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91rm9200_tcblocks[] = {
-+	[0] = {
-+		.physaddr	= AT91RM9200_BASE_TCB0,
-+		.irq		= { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 },
-+		.clk		= { &tc0_clk, &tc1_clk, &tc2_clk },
-+	},
-+	[1] = {
-+		.physaddr	= AT91RM9200_BASE_TCB1,
-+		.irq		= { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 },
-+		.clk		= { &tc3_clk, &tc4_clk, &tc5_clk },
-+	},
-+};
-+
-+#define at91rm9200_tc_init()	atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks))
-+
-+#else
-+#define at91rm9200_tc_init()	do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  AT91RM9200 processor initialization
-  * -------------------------------------------------------------------- */
- void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
-@@ -271,6 +315,9 @@
- 
- 	/* Initialize GPIO subsystem */
- 	at91_gpio_init(at91rm9200_gpio, banks);
-+
-+	/* Initialize the Timer/Counter blocks */
-+	at91rm9200_tc_init();
- }
- 
- 
-@@ -284,28 +331,28 @@
- static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 	7,	/* Advanced Interrupt Controller (FIQ) */
- 	7,	/* System Peripherals */
--	0,	/* Parallel IO Controller A */
--	0,	/* Parallel IO Controller B */
--	0,	/* Parallel IO Controller C */
--	0,	/* Parallel IO Controller D */
--	6,	/* USART 0 */
--	6,	/* USART 1 */
--	6,	/* USART 2 */
--	6,	/* USART 3 */
-+	1,	/* Parallel IO Controller A */
-+	1,	/* Parallel IO Controller B */
-+	1,	/* Parallel IO Controller C */
-+	1,	/* Parallel IO Controller D */
-+	5,	/* USART 0 */
-+	5,	/* USART 1 */
-+	5,	/* USART 2 */
-+	5,	/* USART 3 */
- 	0,	/* Multimedia Card Interface */
--	4,	/* USB Device Port */
--	0,	/* Two-Wire Interface */
--	6,	/* Serial Peripheral Interface */
--	5,	/* Serial Synchronous Controller 0 */
--	5,	/* Serial Synchronous Controller 1 */
--	5,	/* Serial Synchronous Controller 2 */
-+	2,	/* USB Device Port */
-+	6,	/* Two-Wire Interface */
-+	5,	/* Serial Peripheral Interface */
-+	4,	/* Serial Synchronous Controller 0 */
-+	4,	/* Serial Synchronous Controller 1 */
-+	4,	/* Serial Synchronous Controller 2 */
- 	0,	/* Timer Counter 0 */
- 	0,	/* Timer Counter 1 */
- 	0,	/* Timer Counter 2 */
- 	0,	/* Timer Counter 3 */
- 	0,	/* Timer Counter 4 */
- 	0,	/* Timer Counter 5 */
--	3,	/* USB Host port */
-+	2,	/* USB Host port */
- 	3,	/* Ethernet MAC */
- 	0,	/* Advanced Interrupt Controller (IRQ0) */
- 	0,	/* Advanced Interrupt Controller (IRQ1) */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c	Tue May  8 12:13:30 2007
-@@ -480,7 +480,18 @@
-  *  SPI
-  * -------------------------------------------------------------------- */
- 
--#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)
-+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE)		/* legacy SPI driver */
-+#define SPI_DEVNAME	"at91_spi"
-+
-+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE)	/* SPI bitbanging driver */
-+#define SPI_DEVNAME	"at91_spi"
-+
-+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)	/* new SPI driver */
-+#define SPI_DEVNAME	"atmel_spi"
-+
-+#endif
-+
-+#ifdef SPI_DEVNAME
- static u64 spi_dmamask = 0xffffffffUL;
- 
- static struct resource spi_resources[] = {
-@@ -497,7 +508,7 @@
- };
- 
- static struct platform_device at91rm9200_spi_device = {
--	.name		= "at91_spi",
-+	.name		= SPI_DEVNAME,
- 	.id		= 0,
- 	.dev		= {
- 				.dma_mask		= &spi_dmamask,
-@@ -606,6 +617,32 @@
- #endif
- 
- 
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+	.name		= "at91_leds",
-+	.id		= -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+	if (!nr)
-+		return;
-+
-+	at91_leds.dev.platform_data = leds;
-+
-+	for ( ; nr; nr--, leds++) {
-+		leds->index = nr;	/* first record stores number of leds */
-+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+	}
-+
-+	platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
-  *  UART
-  * -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9260.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c	Tue May  8 12:13:30 2007
-@@ -119,6 +119,11 @@
- 	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
- 	.type		= CLK_TYPE_PERIPHERAL,
- };
-+static struct clk ssc_clk = {
-+	.name		= "ssc_clk",
-+	.pmc_mask	= 1 << AT91SAM9260_ID_SSC,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
- static struct clk tc0_clk = {
- 	.name		= "tc0_clk",
- 	.pmc_mask	= 1 << AT91SAM9260_ID_TC0,
-@@ -193,7 +198,7 @@
- 	&twi_clk,
- 	&spi0_clk,
- 	&spi1_clk,
--	// ssc
-+	&ssc_clk,
- 	&tc0_clk,
- 	&tc1_clk,
- 	&tc2_clk,
-@@ -264,6 +269,33 @@
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9260_tcblocks[] = {
-+	[0] = {
-+		.physaddr	= AT91SAM9260_BASE_TCB0,
-+		.irq		= { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 },
-+		.clk		= { &tc0_clk, &tc1_clk, &tc2_clk },
-+	},
-+	[1] = {
-+		.physaddr	= AT91SAM9260_BASE_TCB1,
-+		.irq		= { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 },
-+		.clk		= { &tc3_clk, &tc4_clk, &tc5_clk },
-+	},
-+};
-+
-+#define at91sam9260_tc_init()	atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks))
-+
-+#else
-+#define at91sam9260_tc_init()	do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  AT91SAM9260 processor initialization
-  * -------------------------------------------------------------------- */
- 
-@@ -310,6 +342,9 @@
- 
- 	/* Register GPIO subsystem */
- 	at91_gpio_init(at91sam9260_gpio, 3);
-+
-+	/* Initialize the Timer/Counter blocks */
-+	at91sam9260_tc_init();
- }
- 
- /* --------------------------------------------------------------------
-@@ -322,30 +357,30 @@
- static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 	7,	/* Advanced Interrupt Controller */
- 	7,	/* System Peripherals */
--	0,	/* Parallel IO Controller A */
--	0,	/* Parallel IO Controller B */
--	0,	/* Parallel IO Controller C */
-+	1,	/* Parallel IO Controller A */
-+	1,	/* Parallel IO Controller B */
-+	1,	/* Parallel IO Controller C */
- 	0,	/* Analog-to-Digital Converter */
--	6,	/* USART 0 */
--	6,	/* USART 1 */
--	6,	/* USART 2 */
-+	5,	/* USART 0 */
-+	5,	/* USART 1 */
-+	5,	/* USART 2 */
- 	0,	/* Multimedia Card Interface */
--	4,	/* USB Device Port */
--	0,	/* Two-Wire Interface */
--	6,	/* Serial Peripheral Interface 0 */
--	6,	/* Serial Peripheral Interface 1 */
-+	2,	/* USB Device Port */
-+	6,	/* Two-Wire Interface */
-+	5,	/* Serial Peripheral Interface 0 */
-+	5,	/* Serial Peripheral Interface 1 */
- 	5,	/* Serial Synchronous Controller */
- 	0,
- 	0,
- 	0,	/* Timer Counter 0 */
- 	0,	/* Timer Counter 1 */
- 	0,	/* Timer Counter 2 */
--	3,	/* USB Host port */
-+	2,	/* USB Host port */
- 	3,	/* Ethernet */
- 	0,	/* Image Sensor Interface */
--	6,	/* USART 3 */
--	6,	/* USART 4 */
--	6,	/* USART 5 */
-+	5,	/* USART 3 */
-+	5,	/* USART 4 */
-+	5,	/* USART 5 */
- 	0,	/* Timer Counter 3 */
- 	0,	/* Timer Counter 4 */
- 	0,	/* Timer Counter 5 */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c	Tue May  8 12:13:30 2007
-@@ -527,6 +527,32 @@
- #endif
- 
- 
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+	.name		= "at91_leds",
-+	.id		= -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+	if (!nr)
-+		return;
-+
-+	at91_leds.dev.platform_data = leds;
-+
-+	for ( ; nr; nr--, leds++) {
-+		leds->index = nr;	/* first record stores number of leds */
-+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+	}
-+
-+	platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
-  *  UART
-  * -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9261.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c	Tue May  8 12:13:30 2007
-@@ -97,6 +97,21 @@
- 	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
- 	.type		= CLK_TYPE_PERIPHERAL,
- };
-+static struct clk ssc0_clk = {
-+	.name		= "ssc0_clk",
-+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC0,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+	.name		= "ssc1_clk",
-+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC1,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc2_clk = {
-+	.name		= "ssc2_clk",
-+	.pmc_mask	= 1 << AT91SAM9261_ID_SSC2,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
- static struct clk tc0_clk = {
- 	.name		= "tc0_clk",
- 	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
-@@ -135,7 +150,9 @@
- 	&twi_clk,
- 	&spi0_clk,
- 	&spi1_clk,
--	// ssc 0 .. ssc2
-+	&ssc0_clk,
-+	&ssc1_clk,
-+	&ssc2_clk,
- 	&tc0_clk,
- 	&tc1_clk,
- 	&tc2_clk,
-@@ -230,6 +247,28 @@
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9261_tcblocks[] = {
-+	[0] = {
-+		.physaddr	= AT91SAM9261_BASE_TCB0,
-+		.irq		= { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 },
-+		.clk		= { &tc0_clk, &tc1_clk, &tc2_clk },
-+	}
-+};
-+
-+#define at91sam9261_tc_init()	atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks))
-+
-+#else
-+#define at91sam9261_tc_init()	do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  AT91SAM9261 processor initialization
-  * -------------------------------------------------------------------- */
- 
-@@ -250,6 +289,9 @@
- 
- 	/* Register GPIO subsystem */
- 	at91_gpio_init(at91sam9261_gpio, 3);
-+
-+	/* Initialize the Timer/Counter blocks */
-+	at91sam9261_tc_init();
- }
- 
- /* --------------------------------------------------------------------
-@@ -262,25 +304,25 @@
- static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 	7,	/* Advanced Interrupt Controller */
- 	7,	/* System Peripherals */
--	0,	/* Parallel IO Controller A */
--	0,	/* Parallel IO Controller B */
--	0,	/* Parallel IO Controller C */
-+	1,	/* Parallel IO Controller A */
-+	1,	/* Parallel IO Controller B */
-+	1,	/* Parallel IO Controller C */
- 	0,
--	6,	/* USART 0 */
--	6,	/* USART 1 */
--	6,	/* USART 2 */
-+	5,	/* USART 0 */
-+	5,	/* USART 1 */
-+	5,	/* USART 2 */
- 	0,	/* Multimedia Card Interface */
--	4,	/* USB Device Port */
--	0,	/* Two-Wire Interface */
--	6,	/* Serial Peripheral Interface 0 */
--	6,	/* Serial Peripheral Interface 1 */
--	5,	/* Serial Synchronous Controller 0 */
--	5,	/* Serial Synchronous Controller 1 */
--	5,	/* Serial Synchronous Controller 2 */
-+	2,	/* USB Device Port */
-+	6,	/* Two-Wire Interface */
-+	5,	/* Serial Peripheral Interface 0 */
-+	5,	/* Serial Peripheral Interface 1 */
-+	4,	/* Serial Synchronous Controller 0 */
-+	4,	/* Serial Synchronous Controller 1 */
-+	4,	/* Serial Synchronous Controller 2 */
- 	0,	/* Timer Counter 0 */
- 	0,	/* Timer Counter 1 */
- 	0,	/* Timer Counter 2 */
--	3,	/* USB Host port */
-+	2,	/* USB Host port */
- 	3,	/* LCD Controller */
- 	0,
- 	0,
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c	Tue May  8 12:56:33 2007
-@@ -14,6 +14,9 @@
- #include <asm/mach/map.h>
- 
- #include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
- 
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-@@ -430,9 +433,9 @@
-  *  LCD Controller
-  * -------------------------------------------------------------------- */
- 
--#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE)
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
- static u64 lcdc_dmamask = 0xffffffffUL;
--static struct at91fb_info lcdc_data;
-+static struct atmel_lcdfb_info lcdc_data;
- 
- static struct resource lcdc_resources[] = {
- 	[0] = {
-@@ -455,7 +458,7 @@
- };
- 
- static struct platform_device at91_lcdc_device = {
--	.name		= "at91-fb",
-+	.name		= "atmel_lcdfb",
- 	.id		= 0,
- 	.dev		= {
- 				.dma_mask		= &lcdc_dmamask,
-@@ -466,7 +469,7 @@
- 	.num_resources	= ARRAY_SIZE(lcdc_resources),
- };
- 
--void __init at91_add_device_lcdc(struct at91fb_info *data)
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
- {
- 	if (!data) {
- 		return;
-@@ -499,7 +502,7 @@
- 	platform_device_register(&at91_lcdc_device);
- }
- #else
--void __init at91_add_device_lcdc(struct at91fb_info *data) {}
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
- #endif
- 
- 
-@@ -525,6 +528,32 @@
- #endif
- 
- 
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+	.name		= "at91_leds",
-+	.id		= -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+	if (!nr)
-+		return;
-+
-+	at91_leds.dev.platform_data = leds;
-+
-+	for ( ; nr; nr--, leds++) {
-+		leds->index = nr;	/* first record stores number of leds */
-+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+	}
-+
-+	platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
-  *  UART
-  * -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9263.c linux-2.6-stable/arch/arm/mach-at91/at91sam9263.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9263.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9263.c	Tue May  8 12:13:30 2007
-@@ -87,6 +87,11 @@
- 	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
- 	.type		= CLK_TYPE_PERIPHERAL,
- };
-+static struct clk can_clk = {
-+	.name		= "can_clk",
-+	.pmc_mask	= 1 << AT91SAM9263_ID_CAN,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
- static struct clk twi_clk = {
- 	.name		= "twi_clk",
- 	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
-@@ -102,16 +107,46 @@
- 	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
- 	.type		= CLK_TYPE_PERIPHERAL,
- };
-+static struct clk ssc0_clk = {
-+	.name		= "ssc0_clk",
-+	.pmc_mask	= 1 << AT91SAM9263_ID_SSC0,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+	.name		= "ssc1_clk",
-+	.pmc_mask	= 1 << AT91SAM9263_ID_SSC1,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ac97_clk = {
-+	.name		= "ac97_clk",
-+	.pmc_mask	= 1 << AT91SAM9263_ID_AC97C,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
- static struct clk tcb_clk = {
- 	.name		= "tcb_clk",
- 	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
- 	.type		= CLK_TYPE_PERIPHERAL,
- };
-+static struct clk pwmc_clk = {
-+	.name		= "pwmc_clk",
-+	.pmc_mask	= 1 << AT91SAM9263_ID_PWMC,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
- static struct clk macb_clk = {
- 	.name		= "macb_clk",
- 	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
- 	.type		= CLK_TYPE_PERIPHERAL,
- };
-+static struct clk dma_clk = {
-+	.name		= "dma_clk",
-+	.pmc_mask	= 1 << AT91SAM9263_ID_DMA,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk twodge_clk = {
-+	.name		= "2dge_clk",
-+	.pmc_mask	= 1 << AT91SAM9263_ID_2DGE,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
- static struct clk udc_clk = {
- 	.name		= "udc_clk",
- 	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
-@@ -142,20 +177,21 @@
- 	&usart2_clk,
- 	&mmc0_clk,
- 	&mmc1_clk,
--	// can
-+	&can_clk,
- 	&twi_clk,
- 	&spi0_clk,
- 	&spi1_clk,
--	// ssc0 .. ssc1
--	// ac97
-+	&ssc0_clk,
-+	&ssc1_clk,
-+	&ac97_clk,
- 	&tcb_clk,
--	// pwmc
-+	&pwmc_clk,
- 	&macb_clk,
--	// 2dge
-+	&twodge_clk,
- 	&udc_clk,
- 	&isi_clk,
- 	&lcdc_clk,
--	// dma
-+	&dma_clk,
- 	&ohci_clk,
- 	// irq0 .. irq1
- };
-@@ -237,6 +273,28 @@
- 
- 
- /* --------------------------------------------------------------------
-+ *  Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9263_tcblocks[] = {
-+	[0] = {
-+		.physaddr	= AT91SAM9263_BASE_TCB0,
-+		.irq		= { AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB, AT91SAM9263_ID_TCB },
-+		.clk		= { &tcb_clk, &tcb_clk, &tcb_clk },
-+	}
-+};
-+
-+#define at91sam9263_tc_init()	atmel_tc_init(at91sam9263_tcblocks, ARRAY_SIZE(at91sam9263_tcblocks))
-+
-+#else
-+#define at91sam9263_tc_init()	do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  AT91SAM9263 processor initialization
-  * -------------------------------------------------------------------- */
- 
-@@ -256,6 +314,9 @@
- 
- 	/* Register GPIO subsystem */
- 	at91_gpio_init(at91sam9263_gpio, 5);
-+
-+	/* Initialize the Timer/Counter blocks */
-+	at91sam9263_tc_init();
- }
- 
- /* --------------------------------------------------------------------
-@@ -268,34 +329,34 @@
- static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 	7,	/* Advanced Interrupt Controller (FIQ) */
- 	7,	/* System Peripherals */
--	0,	/* Parallel IO Controller A */
--	0,	/* Parallel IO Controller B */
--	0,	/* Parallel IO Controller C, D and E */
-+	1,	/* Parallel IO Controller A */
-+	1,	/* Parallel IO Controller B */
-+	1,	/* Parallel IO Controller C, D and E */
- 	0,
- 	0,
--	6,	/* USART 0 */
--	6,	/* USART 1 */
--	6,	/* USART 2 */
-+	5,	/* USART 0 */
-+	5,	/* USART 1 */
-+	5,	/* USART 2 */
- 	0,	/* Multimedia Card Interface 0 */
- 	0,	/* Multimedia Card Interface 1 */
--	4,	/* CAN */
--	0,	/* Two-Wire Interface */
--	6,	/* Serial Peripheral Interface 0 */
--	6,	/* Serial Peripheral Interface 1 */
--	5,	/* Serial Synchronous Controller 0 */
--	5,	/* Serial Synchronous Controller 1 */
--	6,	/* AC97 Controller */
-+	3,	/* CAN */
-+	6,	/* Two-Wire Interface */
-+	5,	/* Serial Peripheral Interface 0 */
-+	5,	/* Serial Peripheral Interface 1 */
-+	4,	/* Serial Synchronous Controller 0 */
-+	4,	/* Serial Synchronous Controller 1 */
-+	5,	/* AC97 Controller */
- 	0,	/* Timer Counter 0, 1 and 2 */
- 	0,	/* Pulse Width Modulation Controller */
- 	3,	/* Ethernet */
- 	0,
- 	0,	/* 2D Graphic Engine */
--	3,	/* USB Device Port */
-+	2,	/* USB Device Port */
- 	0,	/* Image Sensor Interface */
- 	3,	/* LDC Controller */
- 	0,	/* DMA Controller */
- 	0,
--	3,	/* USB Host port */
-+	2,	/* USB Host port */
- 	0,	/* Advanced Interrupt Controller (IRQ0) */
- 	0,	/* Advanced Interrupt Controller (IRQ1) */
- };
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9263_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9263_devices.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9263_devices.c	Thu May 10 12:23:46 2007
-@@ -13,6 +13,9 @@
- #include <asm/mach/map.h>
- 
- #include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
- 
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
-@@ -573,6 +576,180 @@
- 
- 
- /* --------------------------------------------------------------------
-+ *  AC97
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
-+static u64 ac97_dmamask = 0xffffffffUL;
-+static struct atmel_ac97_data ac97_data;
-+
-+static struct resource ac97_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9263_BASE_AC97C,
-+		.end	= AT91SAM9263_BASE_AC97C + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9263_ID_AC97C,
-+		.end	= AT91SAM9263_ID_AC97C,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9263_ac97_device = {
-+	.name		= "ac97c",
-+	.id		= 1,
-+	.dev		= {
-+				.dma_mask		= &ac97_dmamask,
-+				.coherent_dma_mask	= 0xffffffff,
-+				.platform_data		= &ac97_data,
-+	},
-+	.resource	= ac97_resources,
-+	.num_resources	= ARRAY_SIZE(ac97_resources),
-+};
-+
-+void __init at91_add_device_ac97(struct atmel_ac97_data *data)
-+{
-+	if (!data)
-+		return;
-+
-+	at91_set_A_periph(AT91_PIN_PB0, 0);	/* AC97FS */
-+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* AC97CK */
-+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* AC97TX */
-+	at91_set_A_periph(AT91_PIN_PB3, 0);	/* AC97RX */
-+
-+	/* reset */
-+	if (data->reset_pin)
-+		at91_set_gpio_output(data->reset_pin, 0);
-+
-+	ac97_data = *ek_data;
-+	platform_device_register(&at91sam9263_ac97_device);
-+}
-+#else
-+void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  Image Sensor Interface
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-+
-+struct resource isi_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9263_BASE_ISI,
-+		.end	= AT91SAM9263_BASE_ISI + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9263_ID_ISI,
-+		.end	= AT91SAM9263_ID_ISI,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9263_isi_device = {
-+	.name		= "at91_isi",
-+	.id		= -1,
-+	.resource	= isi_resources,
-+	.num_resources	= ARRAY_SIZE(isi_resources),
-+};
-+
-+void __init at91_add_device_isi(void)
-+{
-+	at91_set_A_periph(AT91_PIN_PE0, 0);	/* ISI_D0 */
-+	at91_set_A_periph(AT91_PIN_PE1, 0);	/* ISI_D1 */
-+	at91_set_A_periph(AT91_PIN_PE2, 0);	/* ISI_D2 */
-+	at91_set_A_periph(AT91_PIN_PE3, 0);	/* ISI_D3 */
-+	at91_set_A_periph(AT91_PIN_PE4, 0);	/* ISI_D4 */
-+	at91_set_A_periph(AT91_PIN_PE5, 0);	/* ISI_D5 */
-+	at91_set_A_periph(AT91_PIN_PE6, 0);	/* ISI_D6 */
-+	at91_set_A_periph(AT91_PIN_PE7, 0);	/* ISI_D7 */
-+	at91_set_A_periph(AT91_PIN_PE8, 0);	/* ISI_PCK */
-+	at91_set_A_periph(AT91_PIN_PE9, 0);	/* ISI_HSYNC */
-+	at91_set_A_periph(AT91_PIN_PE10, 0);	/* ISI_VSYNC */
-+	at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
-+	at91_set_B_periph(AT91_PIN_PE12, 0);	/* ISI_PD8 */
-+	at91_set_B_periph(AT91_PIN_PE13, 0);	/* ISI_PD9 */
-+	at91_set_B_periph(AT91_PIN_PE14, 0);	/* ISI_PD10 */
-+	at91_set_B_periph(AT91_PIN_PE15, 0);	/* ISI_PD11 */
-+}
-+#else
-+void __init at91_add_device_isi(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  LCD Controller
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static u64 lcdc_dmamask = 0xffffffffUL;
-+static struct atmel_lcdfb_info lcdc_data;
-+
-+static struct resource lcdc_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9263_LCDC_BASE,
-+		.end	= AT91SAM9263_LCDC_BASE + SZ_4K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9263_ID_LCDC,
-+		.end	= AT91SAM9263_ID_LCDC,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91_lcdc_device = {
-+	.name		= "atmel_lcdfb",
-+	.id		= 0,
-+	.dev		= {
-+				.dma_mask		= &lcdc_dmamask,
-+				.coherent_dma_mask	= 0xffffffff,
-+				.platform_data		= &lcdc_data,
-+	},
-+	.resource	= lcdc_resources,
-+	.num_resources	= ARRAY_SIZE(lcdc_resources),
-+};
-+
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-+{
-+	if (!data)
-+		return;
-+
-+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
-+	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
-+	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
-+	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
-+	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
-+	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
-+	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
-+	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
-+	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
-+	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
-+	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
-+	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
-+	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
-+	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD13 */
-+	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
-+	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
-+	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
-+	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
-+	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
-+	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD21 */
-+	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
-+	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
-+
-+	lcdc_data = *data;
-+	platform_device_register(&at91_lcdc_device);
-+}
-+#else
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-  *  LEDs
-  * -------------------------------------------------------------------- */
- 
-@@ -594,6 +771,32 @@
- #endif
- 
- 
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+	.name		= "at91_leds",
-+	.id		= -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+	if (!nr)
-+		return;
-+
-+	at91_leds.dev.platform_data = leds;
-+
-+	for ( ; nr; nr--, leds++) {
-+		leds->index = nr;	/* first record stores number of leds */
-+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+	}
-+
-+	platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
- /* --------------------------------------------------------------------
-  *  UART
-  * -------------------------------------------------------------------- */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9rl.c linux-2.6-stable/arch/arm/mach-at91/at91sam9rl.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9rl.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9rl.c	Fri May 11 15:48:14 2007
-@@ -0,0 +1,366 @@
-+/*
-+ * arch/arm/mach-at91/at91sam9rl.c
-+ *
-+ *  Copyright (C) 2005 SAN People
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/at91sam9rl.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91_rstc.h>
-+
-+#include "generic.h"
-+#include "clock.h"
-+
-+static struct map_desc at91sam9rl_io_desc[] __initdata = {
-+	{
-+		.virtual	= AT91_VA_BASE_SYS,
-+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-+		.length		= SZ_16K,
-+		.type		= MT_DEVICE,
-+	},
-+};
-+
-+static struct map_desc at91sam9rl_sram_desc[] __initdata = {
-+	{
-+		.pfn		= __phys_to_pfn(AT91SAM9RL_SRAM_BASE),
-+		.type		= MT_DEVICE,
-+	}
-+};
-+
-+/* --------------------------------------------------------------------
-+ *  Clocks
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * The peripheral clocks.
-+ */
-+static struct clk pioA_clk = {
-+	.name		= "pioA_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOA,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pioB_clk = {
-+	.name		= "pioB_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOB,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pioC_clk = {
-+	.name		= "pioC_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOC,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pioD_clk = {
-+	.name		= "pioD_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOD,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart0_clk = {
-+	.name		= "usart0_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_US0,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart1_clk = {
-+	.name		= "usart1_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_US1,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart2_clk = {
-+	.name		= "usart2_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_US2,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk usart3_clk = {
-+	.name		= "usart3_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_US3,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk mmc_clk = {
-+	.name		= "mci_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_MCI,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk twi0_clk = {
-+	.name		= "twi0_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI0,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk twi1_clk = {
-+	.name		= "twi1_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI1,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk spi_clk = {
-+	.name		= "spi_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_SPI,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc0_clk = {
-+	.name		= "ssc0_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC0,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ssc1_clk = {
-+	.name		= "ssc1_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC1,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc0_clk = {
-+	.name		= "tc0_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_TC0,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc1_clk = {
-+	.name		= "tc1_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_TC1,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tc2_clk = {
-+	.name		= "tc2_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_TC2,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk pwmc_clk = {
-+	.name		= "pwmc_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_PWMC,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk tsc_clk = {
-+	.name		= "tsc_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_TSC,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk dma_clk = {
-+	.name		= "dma_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_DMA,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk udphs_clk = {
-+	.name		= "udphs_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_UDPHS,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk lcdc_clk = {
-+	.name		= "lcdc_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_LCDC,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+static struct clk ac97_clk = {
-+	.name		= "ac97_clk",
-+	.pmc_mask	= 1 << AT91SAM9RL_ID_AC97C,
-+	.type		= CLK_TYPE_PERIPHERAL,
-+};
-+
-+static struct clk *periph_clocks[] __initdata = {
-+	&pioA_clk,
-+	&pioB_clk,
-+	&pioC_clk,
-+	&pioD_clk,
-+	&usart0_clk,
-+	&usart1_clk,
-+	&usart2_clk,
-+	&usart3_clk,
-+	&mmc_clk,
-+	&twi0_clk,
-+	&twi1_clk,
-+	&spi_clk,
-+	&ssc0_clk,
-+	&ssc1_clk,
-+	&tc0_clk,
-+	&tc1_clk,
-+	&tc2_clk,
-+	&pwmc_clk,
-+	&tsc_clk,
-+	&dma_clk,
-+	&udphs_clk,
-+	&lcdc_clk,
-+	&ac97_clk,
-+	// irq0
-+};
-+
-+/*
-+ * The two programmable clocks.
-+ * You must configure pin multiplexing to bring these signals out.
-+ */
-+static struct clk pck0 = {
-+	.name		= "pck0",
-+	.pmc_mask	= AT91_PMC_PCK0,
-+	.type		= CLK_TYPE_PROGRAMMABLE,
-+	.id		= 0,
-+};
-+static struct clk pck1 = {
-+	.name		= "pck1",
-+	.pmc_mask	= AT91_PMC_PCK1,
-+	.type		= CLK_TYPE_PROGRAMMABLE,
-+	.id		= 1,
-+};
-+
-+static void __init at91sam9rl_register_clocks(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-+		clk_register(periph_clocks[i]);
-+
-+	clk_register(&pck0);
-+	clk_register(&pck1);
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  GPIO
-+ * -------------------------------------------------------------------- */
-+
-+static struct at91_gpio_bank at91sam9rl_gpio[] = {
-+	{
-+		.id		= AT91SAM9RL_ID_PIOA,
-+		.offset		= AT91_PIOA,
-+		.clock		= &pioA_clk,
-+	}, {
-+		.id		= AT91SAM9RL_ID_PIOB,
-+		.offset		= AT91_PIOB,
-+		.clock		= &pioB_clk,
-+	}, {
-+		.id		= AT91SAM9RL_ID_PIOC,
-+		.offset		= AT91_PIOC,
-+		.clock		= &pioC_clk,
-+	}, {
-+		.id		= AT91SAM9RL_ID_PIOD,
-+		.offset		= AT91_PIOD,
-+		.clock		= &pioD_clk,
-+	}
-+};
-+
-+static void at91sam9rl_reset(void)
-+{
-+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-+}
-+
-+
-+/* --------------------------------------------------------------------
-+ *  Timer/Counter library initialization
-+ * -------------------------------------------------------------------- */
-+#ifdef CONFIG_ATMEL_TCLIB
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock at91sam9rl_tcblocks[] = {
-+	[0] = {
-+		.physaddr	= AT91SAM9RL_BASE_TCB0,
-+		.irq		= { AT91SAM9RL_ID_TC0, AT91SAM9RL_ID_TC1, AT91SAM9RL_ID_TC2 },
-+		.clk		= { &tc0_clk, &tc1_clk, &tc2_clk },
-+	}
-+};
-+
-+#define at91sam9rl_tc_init()	atmel_tc_init(at91sam9rl_tcblocks, ARRAY_SIZE(at91sam9rl_tcblocks))
-+
-+#else
-+#define at91sam9rl_tc_init()	do {} while(0)
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  AT91SAM9RL processor initialization
-+ * -------------------------------------------------------------------- */
-+
-+void __init at91sam9rl_initialize(unsigned long main_clock)
-+{
-+	unsigned long cidr, sram_size;
-+
-+	/* Map peripherals */
-+	iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc));
-+
-+	cidr = at91_sys_read(AT91_DBGU_CIDR);
-+
-+	switch (cidr & AT91_CIDR_SRAMSIZ) {
-+		case AT91_CIDR_SRAMSIZ_32K:
-+			sram_size = 2 * SZ_16K;
-+			break;
-+		case AT91_CIDR_SRAMSIZ_16K:
-+		default:
-+			sram_size = SZ_16K;
-+	}
-+
-+	at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
-+	at91sam9rl_sram_desc->length = sram_size;
-+
-+	/* Map SRAM */
-+	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
-+
-+	at91_arch_reset = at91sam9rl_reset;
-+	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
-+
-+	/* Init clock subsystem */
-+	at91_clock_init(main_clock);
-+
-+	/* Register the processor-specific clocks */
-+	at91sam9rl_register_clocks();
-+
-+	/* Register GPIO subsystem */
-+	at91_gpio_init(at91sam9rl_gpio, 4);
-+	
-+	/* Initialize the Timer/Counter blocks */
-+	at91sam9rl_tc_init();
-+}
-+
-+/* --------------------------------------------------------------------
-+ *  Interrupt initialization
-+ * -------------------------------------------------------------------- */
-+
-+/*
-+ * The default interrupt priority levels (0 = lowest, 7 = highest).
-+ */
-+static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
-+	7,	/* Advanced Interrupt Controller */
-+	7,	/* System Peripherals */
-+	1,	/* Parallel IO Controller A */
-+	1,	/* Parallel IO Controller B */
-+	1,	/* Parallel IO Controller C */
-+	1,	/* Parallel IO Controller D */
-+	5,	/* USART 0 */
-+	5,	/* USART 1 */
-+	5,	/* USART 2 */
-+	5,	/* USART 3 */
-+	0,	/* Multimedia Card Interface */
-+	6,	/* Two-Wire Interface 0 */
-+	6,	/* Two-Wire Interface 1 */
-+	5,	/* Serial Peripheral Interface */
-+	4,	/* Serial Synchronous Controller 0 */
-+	4,	/* Serial Synchronous Controller 1 */
-+	0,	/* Timer Counter 0 */
-+	0,	/* Timer Counter 1 */
-+	0,	/* Timer Counter 2 */
-+	0,
-+	0,	/* Touch Screen Controller */
-+	0,	/* DMA Controller */
-+	2,	/* USB Device High speed port */
-+	2,	/* LCD Controller */
-+	6,	/* AC97 Controller */
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,
-+	0,	/* Advanced Interrupt Controller */
-+};
-+
-+void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-+{
-+	if (!priority)
-+		priority = at91sam9rl_default_irq_priority;
-+
-+	/* Initialize the AIC interrupt controller */
-+	at91_aic_init(priority);
-+
-+	/* Enable GPIO interrupts */
-+	at91_gpio_irq_setup();
-+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.21/arch/arm/mach-at91/at91sam9rl_devices.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9rl_devices.c	Fri May 11 16:03:25 2007
-@@ -0,0 +1,660 @@
-+/*
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+
-+#include <linux/platform_device.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam9rl.h>
-+#include <asm/arch/at91sam9rl_matrix.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+
-+#include "generic.h"
-+
-+#define SZ_512	0x00000200
-+#define SZ_256	0x00000100
-+#define SZ_16	0x00000010
-+
-+
-+/* --------------------------------------------------------------------
-+ *  MMC / SD
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-+static u64 mmc_dmamask = 0xffffffffUL;
-+static struct at91_mmc_data mmc_data;
-+
-+static struct resource mmc_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_MCI,
-+		.end	= AT91SAM9RL_BASE_MCI + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_MCI,
-+		.end	= AT91SAM9RL_ID_MCI,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9rl_mmc_device = {
-+	.name		= "at91_mci",
-+	.id		= -1,
-+	.dev		= {
-+				.dma_mask		= &mmc_dmamask,
-+				.coherent_dma_mask	= 0xffffffff,
-+				.platform_data		= &mmc_data,
-+	},
-+	.resource	= mmc_resources,
-+	.num_resources	= ARRAY_SIZE(mmc_resources),
-+};
-+
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-+{
-+	if (!data)
-+		return;
-+
-+	/* input/irq */
-+	if (data->det_pin) {
-+		at91_set_gpio_input(data->det_pin, 1);
-+		at91_set_deglitch(data->det_pin, 1);
-+	}
-+	if (data->wp_pin)
-+		at91_set_gpio_input(data->wp_pin, 1);
-+	if (data->vcc_pin)
-+		at91_set_gpio_output(data->vcc_pin, 0);
-+
-+	/* CLK */
-+	at91_set_A_periph(AT91_PIN_PA2, 0);
-+
-+	/* CMD */
-+	at91_set_A_periph(AT91_PIN_PA1, 1);
-+
-+	/* DAT0, maybe DAT1..DAT3 */
-+	at91_set_A_periph(AT91_PIN_PA0, 1);
-+	if (data->wire4) {
-+		at91_set_A_periph(AT91_PIN_PA3, 1);
-+		at91_set_A_periph(AT91_PIN_PA4, 1);
-+		at91_set_A_periph(AT91_PIN_PA5, 1);
-+	}
-+
-+	mmc_data = *data;
-+	platform_device_register(&at91sam9rl_mmc_device);
-+}
-+#else
-+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  NAND / SmartMedia
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-+static struct at91_nand_data nand_data;
-+
-+#define NAND_BASE	AT91_CHIPSELECT_3
-+
-+static struct resource nand_resources[] = {
-+	{
-+		.start	= NAND_BASE,
-+		.end	= NAND_BASE + SZ_256M - 1,
-+		.flags	= IORESOURCE_MEM,
-+	}
-+};
-+
-+static struct platform_device at91_nand_device = {
-+	.name		= "at91_nand",
-+	.id		= -1,
-+	.dev		= {
-+				.platform_data	= &nand_data,
-+	},
-+	.resource	= nand_resources,
-+	.num_resources	= ARRAY_SIZE(nand_resources),
-+};
-+
-+void __init at91_add_device_nand(struct at91_nand_data *data)
-+{
-+	unsigned long csa;
-+
-+	if (!data)
-+		return;
-+
-+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-+
-+	/* set the bus interface characteristics */
-+	at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
-+			| AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
-+
-+	at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5)
-+			| AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
-+
-+	at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
-+
-+	at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_DBW_8 | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1));
-+
-+	/* enable pin */
-+	if (data->enable_pin)
-+		at91_set_gpio_output(data->enable_pin, 1);
-+
-+	/* ready/busy pin */
-+	if (data->rdy_pin)
-+		at91_set_gpio_input(data->rdy_pin, 1);
-+
-+	/* card detect pin */
-+	if (data->det_pin)
-+		at91_set_gpio_input(data->det_pin, 1);
-+
-+	at91_set_A_periph(AT91_PIN_PB4, 0);		/* NANDOE */
-+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
-+
-+	nand_data = *data;
-+	platform_device_register(&at91_nand_device);
-+}
-+
-+#else
-+void __init at91_add_device_nand(struct at91_nand_data *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  TWI (i2c)
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-+
-+static struct resource twi_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_TWI0,
-+		.end	= AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_TWI0,
-+		.end	= AT91SAM9RL_ID_TWI0,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9rl_twi_device = {
-+	.name		= "at91_i2c",
-+	.id		= -1,
-+	.resource	= twi_resources,
-+	.num_resources	= ARRAY_SIZE(twi_resources),
-+};
-+
-+void __init at91_add_device_i2c(void)
-+{
-+	/* pins used for TWI interface */
-+	at91_set_A_periph(AT91_PIN_PA23, 0);		/* TWD */
-+	at91_set_multi_drive(AT91_PIN_PA23, 1);
-+
-+	at91_set_A_periph(AT91_PIN_PA24, 0);		/* TWCK */
-+	at91_set_multi_drive(AT91_PIN_PA24, 1);
-+
-+	platform_device_register(&at91sam9rl_twi_device);
-+}
-+#else
-+void __init at91_add_device_i2c(void) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  SPI
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-+static u64 spi_dmamask = 0xffffffffUL;
-+
-+static struct resource spi_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_SPI,
-+		.end	= AT91SAM9RL_BASE_SPI + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_SPI,
-+		.end	= AT91SAM9RL_ID_SPI,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct platform_device at91sam9rl_spi_device = {
-+	.name		= "atmel_spi",
-+	.id		= 0,
-+	.dev		= {
-+				.dma_mask		= &spi_dmamask,
-+				.coherent_dma_mask	= 0xffffffff,
-+	},
-+	.resource	= spi_resources,
-+	.num_resources	= ARRAY_SIZE(spi_resources),
-+};
-+
-+static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
-+
-+
-+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-+{
-+	int i;
-+	unsigned long cs_pin;
-+
-+	at91_set_A_periph(AT91_PIN_PA25, 0);	/* MISO */
-+	at91_set_A_periph(AT91_PIN_PA26, 0);	/* MOSI */
-+	at91_set_A_periph(AT91_PIN_PA27, 0);	/* SPCK */
-+
-+	/* Enable SPI chip-selects */
-+	for (i = 0; i < nr_devices; i++) {
-+		if (devices[i].controller_data)
-+			cs_pin = (unsigned long) devices[i].controller_data;
-+		else
-+			cs_pin = spi_standard_cs[devices[i].chip_select];
-+
-+		/* enable chip-select pin */
-+		at91_set_gpio_output(cs_pin, 1);
-+
-+		/* pass chip-select pin to driver */
-+		devices[i].controller_data = (void *) cs_pin;
-+	}
-+
-+	spi_register_board_info(devices, nr_devices);
-+	platform_device_register(&at91sam9rl_spi_device);
-+}
-+#else
-+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  LCD Controller
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static u64 lcdc_dmamask = 0xffffffffUL;
-+static struct atmel_lcdfb_info lcdc_data;
-+
-+static struct resource lcdc_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_LCDC_BASE,
-+		.end	= AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_LCDC,
-+		.end	= AT91SAM9RL_ID_LCDC,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+#if defined(CONFIG_FB_INTSRAM)
-+	[2] = {
-+		.start	= AT91SAM9RL_SRAM_BASE,
-+		.end	= AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+#endif
-+};
-+
-+static struct platform_device at91_lcdc_device = {
-+	.name		= "atmel_lcdfb",
-+	.id		= 0,
-+	.dev		= {
-+				.dma_mask		= &lcdc_dmamask,
-+				.coherent_dma_mask	= 0xffffffff,
-+				.platform_data		= &lcdc_data,
-+	},
-+	.resource	= lcdc_resources,
-+	.num_resources	= ARRAY_SIZE(lcdc_resources),
-+};
-+
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-+{
-+	if (!data) {
-+		return;
-+	}
-+
-+#warning "Check this"
-+	at91_set_B_periph(AT91_PIN_PC5, 0);	/* LCDHSYNC */
-+	at91_set_B_periph(AT91_PIN_PC6, 0);	/* LCDDOTCK */
-+	at91_set_B_periph(AT91_PIN_PC7, 0);	/* LCDDEN */
-+	at91_set_B_periph(AT91_PIN_PC3, 0);	/* LCDCC */
-+	at91_set_B_periph(AT91_PIN_PC9, 0);	/* LCDD3 */
-+	at91_set_B_periph(AT91_PIN_PC10, 0);	/* LCDD4 */
-+	at91_set_B_periph(AT91_PIN_PC11, 0);	/* LCDD5 */
-+	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD6 */
-+	at91_set_B_periph(AT91_PIN_PC13, 0);	/* LCDD7 */
-+	at91_set_B_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
-+	at91_set_B_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
-+	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
-+	at91_set_B_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
-+	at91_set_B_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
-+	at91_set_B_periph(AT91_PIN_PC20, 0);	/* LCDD18 */
-+	at91_set_B_periph(AT91_PIN_PC21, 0);	/* LCDD19 */
-+	at91_set_B_periph(AT91_PIN_PC22, 0);	/* LCDD20 */
-+	at91_set_B_periph(AT91_PIN_PC23, 0);	/* LCDD21 */
-+	at91_set_B_periph(AT91_PIN_PC24, 0);	/* LCDD22 */
-+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* LCDD23 */
-+
-+	lcdc_data = *data;
-+	platform_device_register(&at91_lcdc_device);
-+}
-+#else
-+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  LEDs
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_LEDS)
-+u8 at91_leds_cpu;
-+u8 at91_leds_timer;
-+
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
-+{
-+	/* Enable GPIO to access the LEDs */
-+	at91_set_gpio_output(cpu_led, 1);
-+	at91_set_gpio_output(timer_led, 1);
-+
-+	at91_leds_cpu	= cpu_led;
-+	at91_leds_timer	= timer_led;
-+}
-+#else
-+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
-+#endif
-+
-+
-+#if defined(CONFIG_NEW_LEDS)
-+
-+static struct platform_device at91_leds = {
-+	.name		= "at91_leds",
-+	.id		= -1,
-+};
-+
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr)
-+{
-+	if (!nr)
-+		return;
-+
-+	at91_leds.dev.platform_data = leds;
-+
-+	for ( ; nr; nr--, leds++) {
-+		leds->index = nr;	/* first record stores number of leds */
-+		at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0);
-+	}
-+
-+	platform_device_register(&at91_leds);
-+}
-+#else
-+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {}
-+#endif
-+
-+
-+/* --------------------------------------------------------------------
-+ *  UART
-+ * -------------------------------------------------------------------- */
-+
-+#if defined(CONFIG_SERIAL_ATMEL)
-+static struct resource dbgu_resources[] = {
-+	[0] = {
-+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91_ID_SYS,
-+		.end	= AT91_ID_SYS,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct atmel_uart_data dbgu_data = {
-+	.use_dma_tx	= 0,
-+	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-+};
-+
-+static struct platform_device at91sam9rl_dbgu_device = {
-+	.name		= "atmel_usart",
-+	.id		= 0,
-+	.dev		= {
-+				.platform_data	= &dbgu_data,
-+				.coherent_dma_mask = 0xffffffff,
-+	},
-+	.resource	= dbgu_resources,
-+	.num_resources	= ARRAY_SIZE(dbgu_resources),
-+};
-+
-+static inline void configure_dbgu_pins(void)
-+{
-+	at91_set_A_periph(AT91_PIN_PA21, 0);		/* DRXD */
-+	at91_set_A_periph(AT91_PIN_PA22, 1);		/* DTXD */
-+}
-+
-+static struct resource uart0_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_US0,
-+		.end	= AT91SAM9RL_BASE_US0 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_US0,
-+		.end	= AT91SAM9RL_ID_US0,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct atmel_uart_data uart0_data = {
-+	.use_dma_tx	= 1,
-+	.use_dma_rx	= 1,
-+};
-+
-+static struct platform_device at91sam9rl_uart0_device = {
-+	.name		= "atmel_usart",
-+	.id		= 1,
-+	.dev		= {
-+				.platform_data	= &uart0_data,
-+				.coherent_dma_mask = 0xffffffff,
-+	},
-+	.resource	= uart0_resources,
-+	.num_resources	= ARRAY_SIZE(uart0_resources),
-+};
-+
-+static inline void configure_usart0_pins(void)
-+{
-+	at91_set_A_periph(AT91_PIN_PA6, 1);		/* TXD0 */
-+	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
-+	at91_set_A_periph(AT91_PIN_PA9, 0);		/* RTS0 */
-+	at91_set_A_periph(AT91_PIN_PA10, 0);		/* CTS0 */
-+}
-+
-+static struct resource uart1_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_US1,
-+		.end	= AT91SAM9RL_BASE_US1 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_US1,
-+		.end	= AT91SAM9RL_ID_US1,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct atmel_uart_data uart1_data = {
-+	.use_dma_tx	= 1,
-+	.use_dma_rx	= 1,
-+};
-+
-+static struct platform_device at91sam9rl_uart1_device = {
-+	.name		= "atmel_usart",
-+	.id		= 2,
-+	.dev		= {
-+				.platform_data	= &uart1_data,
-+				.coherent_dma_mask = 0xffffffff,
-+	},
-+	.resource	= uart1_resources,
-+	.num_resources	= ARRAY_SIZE(uart1_resources),
-+};
-+
-+static inline void configure_usart1_pins(void)
-+{
-+	at91_set_A_periph(AT91_PIN_PA11, 1);		/* TXD1 */
-+	at91_set_A_periph(AT91_PIN_PA12, 0);		/* RXD1 */
-+}
-+
-+static struct resource uart2_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_US2,
-+		.end	= AT91SAM9RL_BASE_US2 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_US2,
-+		.end	= AT91SAM9RL_ID_US2,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct atmel_uart_data uart2_data = {
-+	.use_dma_tx	= 1,
-+	.use_dma_rx	= 1,
-+};
-+
-+static struct platform_device at91sam9rl_uart2_device = {
-+	.name		= "atmel_usart",
-+	.id		= 3,
-+	.dev		= {
-+				.platform_data	= &uart2_data,
-+				.coherent_dma_mask = 0xffffffff,
-+	},
-+	.resource	= uart2_resources,
-+	.num_resources	= ARRAY_SIZE(uart2_resources),
-+};
-+
-+static inline void configure_usart2_pins(void)
-+{
-+	at91_set_A_periph(AT91_PIN_PA13, 1);		/* TXD2 */
-+	at91_set_A_periph(AT91_PIN_PA14, 0);		/* RXD2 */
-+}
-+
-+static struct resource uart3_resources[] = {
-+	[0] = {
-+		.start	= AT91SAM9RL_BASE_US3,
-+		.end	= AT91SAM9RL_BASE_US3 + SZ_16K - 1,
-+		.flags	= IORESOURCE_MEM,
-+	},
-+	[1] = {
-+		.start	= AT91SAM9RL_ID_US3,
-+		.end	= AT91SAM9RL_ID_US3,
-+		.flags	= IORESOURCE_IRQ,
-+	},
-+};
-+
-+static struct atmel_uart_data uart3_data = {
-+	.use_dma_tx	= 1,
-+	.use_dma_rx	= 1,
-+};
-+
-+static struct platform_device at91sam9rl_uart3_device = {
-+	.name		= "atmel_usart",
-+	.id		= 4,
-+	.dev		= {
-+				.platform_data	= &uart3_data,
-+				.coherent_dma_mask = 0xffffffff,
-+	},
-+	.resource	= uart3_resources,
-+	.num_resources	= ARRAY_SIZE(uart3_resources),
-+};
-+
-+static inline void configure_usart3_pins(void)
-+{
-+	at91_set_A_periph(AT91_PIN_PB0, 1);		/* TXD3 */
-+	at91_set_A_periph(AT91_PIN_PB1, 0);		/* RXD3 */
-+}
-+
-+struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-+struct platform_device *atmel_default_console_device;	/* the serial console device */
-+
-+void __init at91_init_serial(struct at91_uart_config *config)
-+{
-+	int i;
-+
-+	/* Fill in list of supported UARTs */
-+	for (i = 0; i < config->nr_tty; i++) {
-+		switch (config->tty_map[i]) {
-+			case 0:
-+				configure_usart0_pins();
-+				at91_uarts[i] = &at91sam9rl_uart0_device;
-+				at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
-+				break;
-+			case 1:
-+				configure_usart1_pins();
-+				at91_uarts[i] = &at91sam9rl_uart1_device;
-+				at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
-+				break;
-+			case 2:
-+				configure_usart2_pins();
-+				at91_uarts[i] = &at91sam9rl_uart2_device;
-+				at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
-+				break;
-+			case 3:
-+				configure_usart3_pins();
-+				at91_uarts[i] = &at91sam9rl_uart3_device;
-+				at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
-+				break;
-+			case 4:
-+				configure_dbgu_pins();
-+				at91_uarts[i] = &at91sam9rl_dbgu_device;
-+				at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart");
-+				break;
-+			default:
-+				continue;
-+		}
-+		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-+	}
-+
-+	/* Set serial console device */
-+	if (config->console_tty < ATMEL_MAX_UART)
-+		atmel_default_console_device = at91_uarts[config->console_tty];
-+	if (!atmel_default_console_device)
-+		printk(KERN_INFO "AT91: No default serial console defined.\n");
-+}
-+
-+void __init at91_add_device_serial(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < ATMEL_MAX_UART; i++) {
-+		if (at91_uarts[i])
-+			platform_device_register(at91_uarts[i]);
-+	}
-+}
-+#else
-+void __init at91_init_serial(struct at91_uart_config *config) {}
-+void __init at91_add_device_serial(void) {}
-+#endif
-+
-+
-+/* -------------------------------------------------------------------- */
-+
-+/*
-+ * These devices are always present and don't need any board-specific
-+ * setup.
-+ */
-+static int __init at91_add_standard_devices(void)
-+{
-+	return 0;
-+}
-+
-+arch_initcall(at91_add_standard_devices);
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-cam60.c linux-2.6-stable/arch/arm/mach-at91/board-cam60.c
---- linux-2.6.21/arch/arm/mach-at91/board-cam60.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-cam60.c	Tue May  8 12:13:30 2007
-@@ -0,0 +1,148 @@
-+/*
-+ * KwikByte CAM60
-+ *
-+ * based on board-sam9260ek.c
-+ *   Copyright (C) 2005 SAN People
-+ *   Copyright (C) 2006 Atmel
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ *    0 .. 5 = USART0 .. USART5
-+ *    6      = DBGU
-+ */
-+static struct at91_uart_config __initdata cam60_uart_config = {
-+	.console_tty	= 0,				/* ttyS0 */
-+	.nr_tty		= 1,
-+	.tty_map	= { 6, -1, -1, -1, -1, -1, -1 }	/* ttyS0, ..., ttyS6 */
-+};
-+
-+static void __init cam60_map_io(void)
-+{
-+	/* Initialize processor: 10 MHz crystal */
-+	at91sam9260_initialize(10000000);
-+
-+	/* Setup the serial ports and console */
-+	at91_init_serial(&cam60_uart_config);
-+}
-+
-+static void __init cam60_init_irq(void)
-+{
-+	at91sam9260_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * SPI devices.
-+ */
-+#if defined(CONFIG_MTD_DATAFLASH)
-+static struct mtd_partition __initdata cam60_spi_partitions[] = {
-+	{
-+		.name	= "BOOT1",
-+		.offset	= 0,
-+		.size	= 4 * 1056,
-+	},
-+	{
-+		.name	= "BOOT2",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 256 * 1056,
-+	},
-+	{
-+		.name	= "kernel",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= 2222 * 1056,
-+	},
-+	{
-+		.name	= "file system",
-+		.offset	= MTDPART_OFS_NXTBLK,
-+		.size	= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
-+	.name		= "spi_flash",
-+	.parts		= cam60_spi_partitions,
-+	.nr_parts	= ARRAY_SIZE(cam60_spi_partitions)
-+};
-+#endif
-+
-+static struct spi_board_info cam60_spi_devices[] = {
-+#if defined(CONFIG_MTD_DATAFLASH)
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+		.bus_num	= 0,
-+		.platform_data	= &cam60_spi_flash_platform_data
-+	},
-+#endif
-+};
-+
-+
-+/*
-+ * MACB Ethernet device
-+ */
-+static struct __initdata at91_eth_data cam60_macb_data = {
-+	.phy_irq_pin	= AT91_PIN_PB5,
-+	.is_rmii	= 0,
-+};
-+
-+
-+static void __init cam60_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* SPI */
-+	at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
-+	/* Ethernet */
-+	at91_add_device_eth(&cam60_macb_data);
-+}
-+
-+MACHINE_START(CAM60, "KwikByte CAM60")
-+	/* Maintainer: KwikByte */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91sam926x_timer,
-+	.map_io		= cam60_map_io,
-+	.init_irq	= cam60_init_irq,
-+	.init_machine	= cam60_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-chub.c linux-2.6-stable/arch/arm/mach-at91/board-chub.c
---- linux-2.6.21/arch/arm/mach-at91/board-chub.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-chub.c	Tue May  8 12:13:30 2007
-@@ -0,0 +1,132 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-chub.c
-+ *
-+ *  Copyright (C) 2005 SAN People, adapted for Promwad Chub board
-+ *  by Kuten Ivan
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#include "generic.h"
-+
-+/*
-+ * Serial port configuration.
-+ *    0 .. 3 = USART0 .. USART3
-+ *    4      = DBGU
-+ */
-+static struct at91_uart_config __initdata chub_uart_config = {
-+	.console_tty	= 0,				/* ttyS0 */
-+	.nr_tty		= 5,
-+	.tty_map	= { 4, 0, 1, 2, 3 }		/* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init chub_init_irq(void)
-+{
-+	at91rm9200_init_interrupts(NULL);
-+}
-+
-+static void __init chub_map_io(void)
-+{
-+	/* Initialize clocks: 18.432 MHz crystal */
-+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+	/* Setup the serial ports and console */
-+	at91_init_serial(&chub_uart_config);
-+}
-+
-+static struct at91_eth_data __initdata chub_eth_data = {
-+	.phy_irq_pin	= AT91_PIN_PB29,
-+	.is_rmii	= 0,
-+};
-+
-+static struct mtd_partition __initdata chub_nand_partition[] = {
-+	{
-+		.name	= "NAND Partition 1",
-+		.offset = 0,
-+		.size	= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(chub_nand_partition);
-+	return chub_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata chub_nand_data = {
-+	.ale		= 22,
-+	.cle		= 21,
-+	.enable_pin	= AT91_PIN_PA27,
-+	.partition_info	= nand_partitions,
-+};
-+
-+static struct spi_board_info chub_spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	},
-+};
-+
-+static void __init chub_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* I2C */
-+	at91_add_device_i2c();
-+	/* Ethernet */
-+	at91_add_device_eth(&chub_eth_data);
-+	/* SPI */
-+	at91_add_device_spi(chub_spi_devices, ARRAY_SIZE(chub_spi_devices));
-+	/* NAND Flash */
-+	at91_add_device_nand(&chub_nand_data);
-+	/* Disable write protect for NAND */
-+	at91_set_gpio_output(AT91_PIN_PB7, 1);
-+	/* Power enable for 3x RS-232 and 1x RS-485 */
-+	at91_set_gpio_output(AT91_PIN_PB9, 1);
-+	/* Disable write protect for FRAM */
-+	at91_set_gpio_output(AT91_PIN_PA21, 1);
-+	/* Disable write protect for Dataflash */
-+	at91_set_gpio_output(AT91_PIN_PA19, 1);
-+}
-+
-+MACHINE_START(CHUB, "Promwad Chub")
-+	/* Maintainer: Ivan Kuten AT Promwad DOT com */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91rm9200_timer,
-+	.map_io		= chub_map_io,
-+	.init_irq	= chub_init_irq,
-+	.init_machine	= chub_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-csb337.c linux-2.6-stable/arch/arm/mach-at91/board-csb337.c
---- linux-2.6.21/arch/arm/mach-at91/board-csb337.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-csb337.c	Tue May  8 12:13:30 2007
-@@ -24,6 +24,7 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/interrupt.h>
- #include <linux/mtd/physmap.h>
- 
- #include <asm/hardware.h>
-@@ -59,6 +60,7 @@
- 
- 	/* Setup the LEDs */
- 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-+	at91_set_gpio_output(AT91_PIN_PB2, 1);		/* third (unused) LED */
- 
- 	/* Setup the serial ports and console */
- 	at91_init_serial(&csb337_uart_config);
-@@ -149,6 +151,55 @@
- 	.num_resources	= ARRAY_SIZE(csb_flash_resources),
- };
- 
-+static struct at91_gpio_led csb337_leds[] = {
-+	{
-+		.name		= "led0",
-+		.gpio		= AT91_PIN_PB0,
-+		.trigger	= "heartbeat",
-+	},
-+	{
-+		.name		= "led1",
-+		.gpio		= AT91_PIN_PB1,
-+		.trigger	= "timer",
-+	},
-+	{
-+		.name		= "led2",
-+		.gpio		= AT91_PIN_PB2,
-+	}
-+};
-+
-+#if defined(CONFIG_CSB300_WAKE_SW0) || defined(CONFIG_CSB300_WAKE_SW1)
-+static irqreturn_t switch_irq_handler(int irq, void *context)
-+{
-+	return IRQ_HANDLED;
-+}
-+
-+static inline void __init switch_irq_setup(int irq, char *name, unsigned long mode)
-+{
-+	int res;
-+
-+	res = request_irq(irq, switch_irq_handler, IRQF_SAMPLE_RANDOM | mode, name, NULL);
-+	if (res == 0)
-+		enable_irq_wake(irq);
-+}
-+
-+static void __init csb300_switches(void)
-+{
-+#ifdef CONFIG_CSB300_WAKE_SW0
-+	at91_set_A_periph(AT91_PIN_PB29, 1);		/* IRQ0 */
-+	switch_irq_setup(AT91RM9200_ID_IRQ0, "csb300_sw0", IRQF_TRIGGER_FALLING);
-+#endif
-+#ifdef CONFIG_CSB300_WAKE_SW1
-+	at91_set_gpio_input(AT91_PIN_PB28, 1);
-+	at91_set_deglitch(AT91_PIN_PB28, 1);
-+	switch_irq_setup(AT91_PIN_PB28, "csb300_sw1", IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
-+#endif
-+	/* there's also SW2 at PA21, GPIO or TIOA2 */
-+}
-+#else
-+static void __init csb300_switches(void) {}
-+#endif
-+
- static void __init csb337_board_init(void)
- {
- 	/* Serial */
-@@ -168,8 +219,12 @@
- 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
- 	/* MMC */
- 	at91_add_device_mmc(0, &csb337_mmc_data);
-+	/* LEDS */
-+	at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds));
- 	/* NOR flash */
- 	platform_device_register(&csb_flash);
-+	/* Switches on CSB300 */
-+	csb300_switches();
- }
- 
- MACHINE_START(CSB337, "Cogent CSB337")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-dk.c linux-2.6-stable/arch/arm/mach-at91/board-dk.c
---- linux-2.6.21/arch/arm/mach-at91/board-dk.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-dk.c	Tue May  8 14:29:12 2007
-@@ -73,6 +73,185 @@
- 	at91rm9200_init_interrupts(NULL);
- }
- 
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE	0x30000000L
-+#define AT91_FB_REG_SIZE	0x200
-+#define AT91_FB_VMEM_BASE	0x30200000L
-+#define AT91_FB_VMEM_SIZE	0x140000L
-+
-+static void __init dk_init_video(void)
-+{
-+	/* NWAIT Signal */
-+	at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+	/* Initialization of the Static Memory Controller for Chip Select 2 */
-+	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16			/* 16 bit */
-+				| AT91_SMC_WSEN | AT91_SMC_NWS_(4)	/* wait states */
-+				| AT91_SMC_TDF_(1)			/* float time */
-+	);
-+
-+	at91_ics1523_init();
-+}
-+
-+/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
-+   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval dk_s1dfb_initregs[] = {
-+	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
-+	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
-+	{S1DREG_GPIO_CNF0,		0x00},
-+	{S1DREG_GPIO_CNF1,		0x00},
-+	{S1DREG_GPIO_CTL0,		0x08},
-+	{S1DREG_GPIO_CTL1,		0x00},
-+	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
-+	{S1DREG_LCD_CLK_CNF,		0x00},
-+	{S1DREG_CRT_CLK_CNF,		0x00},
-+	{S1DREG_MPLUG_CLK_CNF,		0x00},
-+	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
-+	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
-+	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
-+	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
-+	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
-+	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
-+	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
-+	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
-+	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
-+	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
-+	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
-+	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
-+	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
-+	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
-+	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
-+	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
-+	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
-+	{S1DREG_LCD_DISP_START0,	0x00},
-+	{S1DREG_LCD_DISP_START1,	0xC8},
-+	{S1DREG_LCD_DISP_START2,	0x00},
-+	{S1DREG_LCD_MEM_OFF0,		0x80},
-+	{S1DREG_LCD_MEM_OFF1,		0x02},
-+	{S1DREG_LCD_PIX_PAN,		0x00},
-+	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
-+	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
-+	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
-+	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
-+	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
-+	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
-+	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
-+	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
-+	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
-+	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
-+	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
-+	{S1DREG_TV_OUT_CTL,		0x10},
-+	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
-+	{S1DREG_CRT_DISP_START0,	0x00},
-+	{S1DREG_CRT_DISP_START1,	0x00},
-+	{S1DREG_CRT_DISP_START2,	0x00},
-+	{S1DREG_CRT_MEM_OFF0,		0x80},
-+	{S1DREG_CRT_MEM_OFF1,		0x02},
-+	{S1DREG_CRT_PIX_PAN,		0x00},
-+	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
-+	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
-+	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
-+	{S1DREG_LCD_CUR_START,		0x01},
-+	{S1DREG_LCD_CUR_XPOS0,		0x00},
-+	{S1DREG_LCD_CUR_XPOS1,		0x00},
-+	{S1DREG_LCD_CUR_YPOS0,		0x00},
-+	{S1DREG_LCD_CUR_YPOS1,		0x00},
-+	{S1DREG_LCD_CUR_BCTL0,		0x00},
-+	{S1DREG_LCD_CUR_GCTL0,		0x00},
-+	{S1DREG_LCD_CUR_RCTL0,		0x00},
-+	{S1DREG_LCD_CUR_BCTL1,		0x1F},
-+	{S1DREG_LCD_CUR_GCTL1,		0x3F},
-+	{S1DREG_LCD_CUR_RCTL1,		0x1F},
-+	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
-+	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
-+	{S1DREG_CRT_CUR_START,		0x01},
-+	{S1DREG_CRT_CUR_XPOS0,		0x00},
-+	{S1DREG_CRT_CUR_XPOS1,		0x00},
-+	{S1DREG_CRT_CUR_YPOS0,		0x00},
-+	{S1DREG_CRT_CUR_YPOS1,		0x00},
-+	{S1DREG_CRT_CUR_BCTL0,		0x00},
-+	{S1DREG_CRT_CUR_GCTL0,		0x00},
-+	{S1DREG_CRT_CUR_RCTL0,		0x00},
-+	{S1DREG_CRT_CUR_BCTL1,		0x1F},
-+	{S1DREG_CRT_CUR_GCTL1,		0x3F},
-+	{S1DREG_CRT_CUR_RCTL1,		0x1F},
-+	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
-+	{S1DREG_BBLT_CTL0,		0x00},
-+	{S1DREG_BBLT_CTL0,		0x00},
-+	{S1DREG_BBLT_CC_EXP,		0x00},
-+	{S1DREG_BBLT_OP,		0x00},
-+	{S1DREG_BBLT_SRC_START0,	0x00},
-+	{S1DREG_BBLT_SRC_START1,	0x00},
-+	{S1DREG_BBLT_SRC_START2,	0x00},
-+	{S1DREG_BBLT_DST_START0,	0x00},
-+	{S1DREG_BBLT_DST_START1,	0x00},
-+	{S1DREG_BBLT_DST_START2,	0x00},
-+	{S1DREG_BBLT_MEM_OFF0,		0x00},
-+	{S1DREG_BBLT_MEM_OFF1,		0x00},
-+	{S1DREG_BBLT_WIDTH0,		0x00},
-+	{S1DREG_BBLT_WIDTH1,		0x00},
-+	{S1DREG_BBLT_HEIGHT0,		0x00},
-+	{S1DREG_BBLT_HEIGHT1,		0x00},
-+	{S1DREG_BBLT_BGC0,		0x00},
-+	{S1DREG_BBLT_BGC1,		0x00},
-+	{S1DREG_BBLT_FGC0,		0x00},
-+	{S1DREG_BBLT_FGC1,		0x00},
-+	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
-+	{S1DREG_LKUP_ADDR,		0x00},
-+	{S1DREG_PS_CNF,			0x00},	/* Power Save disable */
-+	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
-+	{S1DREG_CPU2MEM_WDOGT,		0x00},
-+	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata dk_s1dfb_pdata = {
-+	.initregs		= dk_s1dfb_initregs,
-+	.initregssize		= ARRAY_SIZE(dk_s1dfb_initregs),
-+	.platform_init_video	= dk_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = 0xffffffffUL;
-+
-+static struct resource dk_s1dfb_resource[] = {
-+	[0] = {	/* video mem */
-+		.name   = "s1d13806 memory",
-+		.start  = AT91_FB_VMEM_BASE,
-+		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {	/* video registers */
-+		.name   = "s1d13806 registers",
-+		.start  = AT91_FB_REG_BASE,
-+		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device dk_s1dfb_device = {
-+	.name		= "s1d13806fb",
-+	.id		= -1,
-+	.dev		= {
-+			.dma_mask		= &s1dfb_dmamask,
-+			.coherent_dma_mask	= 0xffffffff,
-+			.platform_data		= &dk_s1dfb_pdata,
-+	},
-+	.resource	= dk_s1dfb_resource,
-+	.num_resources	= ARRAY_SIZE(dk_s1dfb_resource),
-+};
-+
-+static void __init dk_add_device_video(void)
-+{
-+	platform_device_register(&dk_s1dfb_device);
-+}
-+#else
-+static void __init dk_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata dk_eth_data = {
- 	.phy_irq_pin	= AT91_PIN_PC4,
- 	.is_rmii	= 1,
-@@ -151,7 +330,7 @@
- #define DK_FLASH_SIZE	0x200000
- 
- static struct physmap_flash_data dk_flash_data = {
--	.width	= 2,
-+	.width		= 2,
- };
- 
- static struct resource dk_flash_resource = {
-@@ -170,6 +349,13 @@
- 	.num_resources	= 1,
- };
- 
-+static struct at91_gpio_led dk_leds[] = {
-+	{
-+		.name		= "led0",
-+		.gpio		= AT91_PIN_PB2,
-+		.trigger	= "timer",
-+	}
-+};
- 
- static void __init dk_board_init(void)
- {
-@@ -200,8 +386,10 @@
- 	at91_add_device_nand(&dk_nand_data);
- 	/* NOR Flash */
- 	platform_device_register(&dk_flash);
-+	/* LEDs */
-+	at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
- 	/* VGA */
--//	dk_add_device_video();
-+	dk_add_device_video();
- }
- 
- MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-ek.c linux-2.6-stable/arch/arm/mach-at91/board-ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-ek.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-ek.c	Tue May  8 14:29:22 2007
-@@ -73,6 +73,187 @@
- 	at91rm9200_init_interrupts(NULL);
- }
- 
-+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-+#include <video/s1d13xxxfb.h>
-+#include <asm/arch/ics1523.h>
-+
-+/* EPSON S1D13806 FB */
-+#define AT91_FB_REG_BASE	0x40000000L
-+#define	AT91_FB_REG_SIZE	0x200
-+#define AT91_FB_VMEM_BASE	0x40200000L
-+#define AT91_FB_VMEM_SIZE	0x140000L
-+
-+static void __init ek_init_video(void)
-+{
-+	/* NWAIT Signal */
-+	at91_set_A_periph(AT91_PIN_PC6, 0);
-+
-+	/* Initialization of the Static Memory Controller for Chip Select 3 */
-+	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_DBW_16			/* 16 bit */
-+				| AT91_SMC_WSEN | AT91_SMC_NWS_(5)	/* wait states */
-+				| AT91_SMC_TDF_(1)			/* float time */
-+	);
-+
-+	at91_ics1523_init();
-+}
-+
-+/* CRT:    (active)   640x480 60Hz (PCLK=CLKI=25.175MHz)
-+   Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=60.000MHz) */
-+static const struct s1d13xxxfb_regval ek_s1dfb_initregs[] = {
-+	{S1DREG_MISC,			0x00},	/* Enable Memory/Register select bit */
-+	{S1DREG_COM_DISP_MODE,		0x00},	/* disable display output */
-+	{S1DREG_GPIO_CNF0,		0xFF},	// 0x00
-+	{S1DREG_GPIO_CNF1,		0x1F},	// 0x08
-+	{S1DREG_GPIO_CTL0,		0x00},
-+	{S1DREG_GPIO_CTL1,		0x00},
-+	{S1DREG_CLK_CNF,		0x01},	/* no divide, MCLK source is CLKI3 0x02*/
-+	{S1DREG_LCD_CLK_CNF,		0x00},
-+	{S1DREG_CRT_CLK_CNF,		0x00},
-+	{S1DREG_MPLUG_CLK_CNF,		0x00},
-+	{S1DREG_CPU2MEM_WST_SEL,	0x01},	/* 2*period(MCLK) - 4ns > period(BCLK) */
-+	{S1DREG_SDRAM_REF_RATE,		0x03},	/* 32768 <= MCLK <= 50000 (MHz) */
-+	{S1DREG_SDRAM_TC0,		0x00},	/* MCLK source freq (MHz): */
-+	{S1DREG_SDRAM_TC1,		0x01},	/* 42 <= MCLK <= 50 */
-+	{S1DREG_MEM_CNF,		0x80},	/* SDRAM Initialization - needed before mem access */
-+	{S1DREG_PANEL_TYPE,		0x25},	/* std TFT 16bit, 8bit SCP format 2, single passive LCD */
-+	{S1DREG_MOD_RATE,		0x00},	/* toggle every FPFRAME */
-+	{S1DREG_LCD_DISP_HWIDTH,	0x4F},	/* 680 pix */
-+	{S1DREG_LCD_NDISP_HPER,		0x12},	/* 152 pix */
-+	{S1DREG_TFT_FPLINE_START,	0x01},	/* 13 pix */
-+	{S1DREG_TFT_FPLINE_PWIDTH,	0x0B},	/* 96 pix */
-+	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},
-+	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},	/* 480 lines */
-+	{S1DREG_LCD_NDISP_VPER,		0x2C},	/* 44 lines */
-+	{S1DREG_TFT_FPFRAME_START,	0x0A},	/* 10 lines */
-+	{S1DREG_TFT_FPFRAME_PWIDTH,	0x01},	/* 2 lines */
-+	{S1DREG_LCD_DISP_MODE,		0x05},  /* 16 bpp */
-+	{S1DREG_LCD_MISC,		0x00},	/* dithering enabled, dual panel buffer enabled */
-+	{S1DREG_LCD_DISP_START0,	0x00},
-+	{S1DREG_LCD_DISP_START1,	0xC8},
-+	{S1DREG_LCD_DISP_START2,	0x00},
-+	{S1DREG_LCD_MEM_OFF0,		0x80},
-+	{S1DREG_LCD_MEM_OFF1,		0x02},
-+	{S1DREG_LCD_PIX_PAN,		0x00},
-+	{S1DREG_LCD_DISP_FIFO_HTC,	0x3B},
-+	{S1DREG_LCD_DISP_FIFO_LTC,	0x3C},
-+	{S1DREG_CRT_DISP_HWIDTH,	0x4F},	/* 680 pix */
-+	{S1DREG_CRT_NDISP_HPER,		0x13},	/* 160 pix */
-+	{S1DREG_CRT_HRTC_START,		0x01},	/* 13 pix */
-+	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},	/* 96 pix */
-+	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},
-+	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},	/* 480 lines */
-+	{S1DREG_CRT_NDISP_VPER,		0x2B},	/* 44 lines */
-+	{S1DREG_CRT_VRTC_START,		0x09},	/* 10 lines */
-+	{S1DREG_CRT_VRTC_PWIDTH,	0x01},	/* 2 lines */
-+	{S1DREG_TV_OUT_CTL,		0x10},
-+	{0x005E,			0x9F},
-+	{0x005F,			0x00},
-+	{S1DREG_CRT_DISP_MODE,		0x05},	/* 16 bpp */
-+	{S1DREG_CRT_DISP_START0,	0x00},
-+	{S1DREG_CRT_DISP_START1,	0x00},
-+	{S1DREG_CRT_DISP_START2,	0x00},
-+	{S1DREG_CRT_MEM_OFF0,		0x80},
-+	{S1DREG_CRT_MEM_OFF1,		0x02},
-+	{S1DREG_CRT_PIX_PAN,		0x00},
-+	{S1DREG_CRT_DISP_FIFO_HTC,	0x3B},
-+	{S1DREG_CRT_DISP_FIFO_LTC,	0x3C},
-+	{S1DREG_LCD_CUR_CTL,		0x00},	/* inactive */
-+	{S1DREG_LCD_CUR_START,		0x01},
-+	{S1DREG_LCD_CUR_XPOS0,		0x00},
-+	{S1DREG_LCD_CUR_XPOS1,		0x00},
-+	{S1DREG_LCD_CUR_YPOS0,		0x00},
-+	{S1DREG_LCD_CUR_YPOS1,		0x00},
-+	{S1DREG_LCD_CUR_BCTL0,		0x00},
-+	{S1DREG_LCD_CUR_GCTL0,		0x00},
-+	{S1DREG_LCD_CUR_RCTL0,		0x00},
-+	{S1DREG_LCD_CUR_BCTL1,		0x1F},
-+	{S1DREG_LCD_CUR_GCTL1,		0x3F},
-+	{S1DREG_LCD_CUR_RCTL1,		0x1F},
-+	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},
-+	{S1DREG_CRT_CUR_CTL,		0x00},	/* inactive */
-+	{S1DREG_CRT_CUR_START,		0x01},
-+	{S1DREG_CRT_CUR_XPOS0,		0x00},
-+	{S1DREG_CRT_CUR_XPOS1,		0x00},
-+	{S1DREG_CRT_CUR_YPOS0,		0x00},
-+	{S1DREG_CRT_CUR_YPOS1,		0x00},
-+	{S1DREG_CRT_CUR_BCTL0,		0x00},
-+	{S1DREG_CRT_CUR_GCTL0,		0x00},
-+	{S1DREG_CRT_CUR_RCTL0,		0x00},
-+	{S1DREG_CRT_CUR_BCTL1,		0x1F},
-+	{S1DREG_CRT_CUR_GCTL1,		0x3F},
-+	{S1DREG_CRT_CUR_RCTL1,		0x1F},
-+	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},
-+	{S1DREG_BBLT_CTL0,		0x00},
-+	{S1DREG_BBLT_CTL0,		0x00},
-+	{S1DREG_BBLT_CC_EXP,		0x00},
-+	{S1DREG_BBLT_OP,		0x00},
-+	{S1DREG_BBLT_SRC_START0,	0x00},
-+	{S1DREG_BBLT_SRC_START1,	0x00},
-+	{S1DREG_BBLT_SRC_START2,	0x00},
-+	{S1DREG_BBLT_DST_START0,	0x00},
-+	{S1DREG_BBLT_DST_START1,	0x00},
-+	{S1DREG_BBLT_DST_START2,	0x00},
-+	{S1DREG_BBLT_MEM_OFF0,		0x00},
-+	{S1DREG_BBLT_MEM_OFF1,		0x00},
-+	{S1DREG_BBLT_WIDTH0,		0x00},
-+	{S1DREG_BBLT_WIDTH1,		0x00},
-+	{S1DREG_BBLT_HEIGHT0,		0x00},
-+	{S1DREG_BBLT_HEIGHT1,		0x00},
-+	{S1DREG_BBLT_BGC0,		0x00},
-+	{S1DREG_BBLT_BGC1,		0x00},
-+	{S1DREG_BBLT_FGC0,		0x00},
-+	{S1DREG_BBLT_FGC1,		0x00},
-+	{S1DREG_LKUP_MODE,		0x00},	/* LCD LUT r | LCD and CRT/TV LUT w */
-+	{S1DREG_LKUP_ADDR,		0x00},
-+	{S1DREG_PS_CNF,			0x10},	/* Power Save disable */
-+	{S1DREG_PS_STATUS,		0x02},	/* LCD Panel down, mem up */
-+	{S1DREG_CPU2MEM_WDOGT,		0x00},
-+	{S1DREG_COM_DISP_MODE,		0x02},	/* enable CRT display output */
-+};
-+
-+static struct s1d13xxxfb_pdata ek_s1dfb_pdata = {
-+	.initregs		= ek_s1dfb_initregs,
-+	.initregssize		= ARRAY_SIZE(ek_s1dfb_initregs),
-+	.platform_init_video	= ek_init_video,
-+};
-+
-+static u64 s1dfb_dmamask = 0xffffffffUL;
-+
-+static struct resource ek_s1dfb_resource[] = {
-+	[0] = {	/* video mem */
-+		.name   = "s1d13806 memory",
-+		.start  = AT91_FB_VMEM_BASE,
-+		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+	[1] = {	/* video registers */
-+		.name   = "s1d13806 registers",
-+		.start  = AT91_FB_REG_BASE,
-+		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
-+		.flags  = IORESOURCE_MEM,
-+	},
-+};
-+
-+static struct platform_device ek_s1dfb_device = {
-+	.name		= "s1d13806fb",
-+	.id		= -1,
-+	.dev		= {
-+			.dma_mask		= &s1dfb_dmamask,
-+			.coherent_dma_mask	= 0xffffffff,
-+			.platform_data		= &ek_s1dfb_pdata,
-+	},
-+	.resource	= ek_s1dfb_resource,
-+	.num_resources	= ARRAY_SIZE(ek_s1dfb_resource),
-+};
-+
-+static void __init ek_add_device_video(void)
-+{
-+	platform_device_register(&ek_s1dfb_device);
-+}
-+#else
-+static void __init ek_add_device_video(void) {}
-+#endif
-+
- static struct at91_eth_data __initdata ek_eth_data = {
- 	.phy_irq_pin	= AT91_PIN_PC4,
- 	.is_rmii	= 1,
-@@ -113,7 +294,7 @@
- #define EK_FLASH_SIZE	0x200000
- 
- static struct physmap_flash_data ek_flash_data = {
--	.width	= 2,
-+	.width		= 2,
- };
- 
- static struct resource ek_flash_resource = {
-@@ -132,6 +313,18 @@
- 	.num_resources	= 1,
- };
- 
-+static struct at91_gpio_led ek_leds[] = {
-+	{
-+		.name		= "led0",
-+		.gpio		= AT91_PIN_PB1,
-+		.trigger	= "heartbeat",
-+	},
-+	{
-+		.name		= "led1",
-+		.gpio		= AT91_PIN_PB2,
-+		.trigger	= "timer",
-+	}
-+};
- 
- static void __init ek_board_init(void)
- {
-@@ -158,8 +351,10 @@
- #endif
- 	/* NOR Flash */
- 	platform_device_register(&ek_flash);
-+	/* LEDs */
-+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- 	/* VGA */
--//	ek_add_device_video();
-+	ek_add_device_video();
- }
- 
- MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-kb9202.c linux-2.6-stable/arch/arm/mach-at91/board-kb9202.c
---- linux-2.6.21/arch/arm/mach-at91/board-kb9202.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-kb9202.c	Tue May  8 12:21:31 2007
-@@ -37,6 +37,8 @@
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
- 
-+#include <asm/arch/at91rm9200_mc.h>
-+
- #include "generic.h"
- 
- 
-@@ -111,6 +113,48 @@
- 	.partition_info	= nand_partitions,
- };
- 
-+
-+#if defined(CONFIG_FB_S1D15605)
-+#warning "Rather pass reset pin via platform_data"
-+static struct resource kb9202_lcd_resources[] = {
-+	[0] = {
-+		.start	= AT91_CHIPSELECT_2,
-+		.end	= AT91_CHIPSELECT_2 + 0x200FF,
-+		.flags	= IORESOURCE_MEM
-+	},
-+	[1] = {	/* reset pin */
-+		.start	= AT91_PIN_PC22,
-+		.end	= AT91_PIN_PC22,
-+		.flags	= IORESOURCE_MEM
-+	},
-+};
-+
-+static struct platform_device kb9202_lcd_device = {
-+	.name		= "s1d15605fb",
-+	.id		= 0,
-+	.num_resources	= ARRAY_SIZE(kb9202_lcd_resources),
-+	.resource	= kb9202_lcd_resources,
-+};
-+
-+static void __init kb9202_add_device_lcd(void)
-+{
-+ 	/* In case the boot loader did not set the chip select mode and timing */
-+	at91_sys_write(AT91_SMC_CSR(2),
-+		AT91_SMC_WSEN | AT91_SMC_NWS_(18) | AT91_SMC_TDF_(1) | AT91_SMC_DBW_8 |
-+		AT91_SMC_RWSETUP_(1) | AT91_SMC_RWHOLD_(1));
-+
-+	/* Backlight pin = output, off */
-+	at91_set_gpio_output(AT91_PIN_PC23, 0);
-+
-+	/* Reset pin = output, in reset */
-+	at91_set_gpio_output(AT91_PIN_PC22, 0);
-+
-+	platform_device_register(&kb9202_lcd_device);
-+}
-+#else
-+static void __init kb9202_add_device_lcd(void) {}
-+#endif
-+
- static void __init kb9202_board_init(void)
- {
- 	/* Serial */
-@@ -129,6 +173,8 @@
- 	at91_add_device_spi(NULL, 0);
- 	/* NAND */
- 	at91_add_device_nand(&kb9202_nand_data);
-+	/* LCD	*/
-+	kb9202_add_device_lcd();
- }
- 
- MACHINE_START(KB9200, "KB920x")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9260ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9260ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9260ek.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9260ek.c	Tue May  8 12:13:30 2007
-@@ -104,9 +104,9 @@
- 	},
- #endif
- #endif
--#if defined(CONFIG_SND_AT73C213)
-+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
- 	{	/* AT73C213 DAC */
--		.modalias	= "snd_at73c213",
-+		.modalias	= "at73c213",
- 		.chip_select	= 0,
- 		.max_speed_hz	= 10 * 1000 * 1000,
- 		.bus_num	= 1,
-@@ -118,7 +118,7 @@
- /*
-  * MACB Ethernet device
-  */
--static struct __initdata at91_eth_data ek_macb_data = {
-+static struct at91_eth_data __initdata ek_macb_data = {
- 	.phy_irq_pin	= AT91_PIN_PA7,
- 	.is_rmii	= 1,
- };
-@@ -188,6 +188,8 @@
- 	at91_add_device_eth(&ek_macb_data);
- 	/* MMC */
- 	at91_add_device_mmc(0, &ek_mmc_data);
-+	/* I2C */
-+	at91_add_device_i2c();
- }
- 
- MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9261ek.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9261ek.c	Wed May  9 12:37:19 2007
-@@ -25,7 +25,11 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/ads7846.h>
- #include <linux/dm9000.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
- 
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -59,6 +63,9 @@
- 	/* Initialize processor: 18.432 MHz crystal */
- 	at91sam9261_initialize(18432000);
- 
-+	/* Setup the LEDs */
-+	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
-+
- 	/* Setup the serial ports and console */
- 	at91_init_serial(&ek_uart_config);
- }
-@@ -195,6 +202,41 @@
- };
- 
- /*
-+ * ADS7846 Touchscreen
-+ */
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+
-+static int ads7843_pendown_state(void)
-+{
-+	return !at91_get_gpio_value(AT91_PIN_PC2);	/* Touchscreen PENIRQ */
-+}
-+
-+static struct ads7846_platform_data ads_info = {
-+	.model			= 7843,
-+	.x_min			= 150,
-+	.x_max			= 3830,
-+	.y_min			= 190,
-+	.y_max			= 3830,
-+	.vref_delay_usecs	= 100,
-+	.x_plate_ohms		= 450,
-+	.y_plate_ohms		= 250,
-+	.pressure_max		= 15000,
-+	.debounce_max		= 1,
-+	.debounce_rep		= 0,
-+	.debounce_tol		= (~0),
-+	.get_pendown_state	= ads7843_pendown_state,
-+};
-+
-+static void __init ek_add_device_ts(void)
-+{
-+	at91_set_B_periph(AT91_PIN_PC2, 1);	/* External IRQ0, with pullup */
-+	at91_set_gpio_input(AT91_PIN_PA11, 1);	/* Touchscreen BUSY signal */
-+}
-+#else
-+static void __init ek_add_device_ts(void) {}
-+#endif
-+
-+/*
-  * SPI devices
-  */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -204,6 +246,17 @@
- 		.max_speed_hz	= 15 * 1000 * 1000,
- 		.bus_num	= 0,
- 	},
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+	{
-+		.modalias	= "ads7846",
-+		.chip_select	= 2,
-+		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-+		.bus_num	= 0,
-+		.platform_data	= &ads_info,
-+		.irq		= AT91SAM9261_ID_IRQ0,
-+		.controller_data = AT91_PIN_PA28,	/* CS pin */
-+	},
-+#endif
- #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- 	{	/* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
- 		.modalias	= "mtd_dataflash",
-@@ -211,9 +264,9 @@
- 		.max_speed_hz	= 15 * 1000 * 1000,
- 		.bus_num	= 0,
- 	},
--#elif defined(CONFIG_SND_AT73C213)
-+#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
- 	{	/* AT73C213 DAC */
--		.modalias	= "snd_at73c213",
-+		.modalias	= "at73c213",
- 		.chip_select	= 3,
- 		.max_speed_hz	= 10 * 1000 * 1000,
- 		.bus_num	= 0,
-@@ -222,6 +275,65 @@
- };
- 
- 
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+	{
-+	        .name           = "TX09D50VM1CCA @ 60",
-+		.refresh	= 60,
-+		.xres		= 240,		.yres		= 320,
-+		.pixclock	= KHZ2PICOS(4965),
-+
-+		.left_margin	= 1,		.right_margin	= 33,
-+		.upper_margin	= 1,		.lower_margin	= 0,
-+		.hsync_len	= 5,		.vsync_len	= 1,
-+
-+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+		.vmode		= FB_VMODE_NONINTERLACED,
-+	},
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+	.manufacturer	= "HIT",
-+	.monitor        = "TX09D50VM1CCA",
-+
-+	.modedb		= at91_tft_vga_modes,
-+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-+	.hfmin		= 15000,
-+	.hfmax		= 64000,
-+	.vfmin		= 50,
-+	.vfmax		= 150,
-+};
-+
-+#define AT91SAM9261_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-+					| ATMEL_LCDC_DISTYPE_TFT    \
-+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+	if (on)
-+		at91_set_gpio_value(AT91_PIN_PA12, 0);	/* power up */
-+	else
-+		at91_set_gpio_value(AT91_PIN_PA12, 1);	/* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+	.default_bpp			= 16,
-+	.default_dmacon			= ATMEL_LCDC_DMAEN,
-+	.default_lcdcon2		= AT91SAM9261_DEFAULT_LCDCON2,
-+	.default_monspecs		= &at91fb_default_monspecs,
-+	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-+	.guard_time			= 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
- static void __init ek_board_init(void)
- {
- 	/* Serial */
-@@ -241,10 +353,14 @@
- #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
- 	/* SPI */
- 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+	/* Touchscreen */
-+	ek_add_device_ts();
- #else
- 	/* MMC */
- 	at91_add_device_mmc(0, &ek_mmc_data);
- #endif
-+	/* LCD Controller */
-+	at91_add_device_lcdc(&ek_lcdc_data);
- }
- 
- MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9263ek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9263ek.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9263ek.c	Tue May  8 12:56:33 2007
-@@ -25,6 +25,10 @@
- #include <linux/module.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/ads7846.h>
-+#include <linux/fb.h>
-+
-+#include <video/atmel_lcdc.h>
- 
- #include <asm/hardware.h>
- #include <asm/setup.h>
-@@ -86,6 +90,40 @@
- 
- 
- /*
-+ * ADS7846 Touchscreen
-+ */
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+static int ads7843_pendown_state(void)
-+{
-+	return !at91_get_gpio_value(AT91_PIN_PA15);	/* Touchscreen PENIRQ */
-+}
-+
-+static struct ads7846_platform_data ads_info = {
-+	.model			= 7843,
-+	.x_min			= 150,
-+	.x_max			= 3830,
-+	.y_min			= 190,
-+	.y_max			= 3830,
-+	.vref_delay_usecs	= 100,
-+	.x_plate_ohms		= 450,
-+	.y_plate_ohms		= 250,
-+	.pressure_max		= 15000,
-+	.debounce_max		= 1,
-+	.debounce_rep		= 0,
-+	.debounce_tol		= (~0),
-+	.get_pendown_state	= ads7843_pendown_state,
-+};
-+
-+static void __init ek_add_device_ts(void)
-+{
-+	at91_set_B_periph(AT91_PIN_PA15, 1);	/* External IRQ1, with pullup */
-+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* Touchscreen BUSY signal */
-+}
-+#else
-+static void __init ek_add_device_ts(void) {}
-+#endif
-+
-+/*
-  * SPI devices.
-  */
- static struct spi_board_info ek_spi_devices[] = {
-@@ -97,6 +135,16 @@
- 		.bus_num	= 0,
- 	},
- #endif
-+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-+	{
-+		.modalias	= "ads7846",
-+		.chip_select	= 3,
-+		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-+		.bus_num	= 0,
-+		.platform_data	= &ads_info,
-+		.irq		= AT91SAM9263_ID_IRQ1,
-+	},
-+#endif
- };
- 
- 
-@@ -112,6 +160,14 @@
- 
- 
- /*
-+ * MACB Ethernet device
-+ */
-+static struct at91_eth_data __initdata ek_macb_data = {
-+	.is_rmii	= 1,
-+};
-+
-+
-+/*
-  * NAND flash
-  */
- static struct mtd_partition __initdata ek_nand_partition[] = {
-@@ -148,6 +204,73 @@
- };
- 
- 
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+	{
-+	        .name           = "TX09D50VM1CCA @ 60",
-+		.refresh	= 60,
-+		.xres		= 240,		.yres		= 320,
-+		.pixclock	= KHZ2PICOS(4965),
-+
-+		.left_margin	= 1,		.right_margin	= 33,
-+		.upper_margin	= 1,		.lower_margin	= 0,
-+		.hsync_len	= 5,		.vsync_len	= 1,
-+
-+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+		.vmode		= FB_VMODE_NONINTERLACED,
-+	},
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+	.manufacturer	= "HIT",
-+	.monitor        = "TX09D70VM1CCA",
-+
-+	.modedb		= at91_tft_vga_modes,
-+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-+	.hfmin		= 15000,
-+	.hfmax		= 64000,
-+	.vfmin		= 50,
-+	.vfmax		= 150,
-+};
-+
-+#define AT91SAM9263_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-+					| ATMEL_LCDC_DISTYPE_TFT    \
-+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+	if (on)
-+		at91_set_gpio_value(AT91_PIN_PD12, 0);	/* power up */
-+	else
-+		at91_set_gpio_value(AT91_PIN_PD12, 1);	/* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+	.default_bpp			= 16,
-+	.default_dmacon			= ATMEL_LCDC_DMAEN,
-+	.default_lcdcon2		= AT91SAM9263_DEFAULT_LCDCON2,
-+	.default_monspecs		= &at91fb_default_monspecs,
-+	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-+	.guard_time			= 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
-+/*
-+ * AC97
-+ */
-+static struct atmel_ac97_data ek_ac97_data = {
-+	.reset_pin	= AT91_PIN_PA13,
-+};
-+
-+
- static void __init ek_board_init(void)
- {
- 	/* Serial */
-@@ -157,11 +280,22 @@
- 	/* USB Device */
- 	at91_add_device_udc(&ek_udc_data);
- 	/* SPI */
-+	at91_set_gpio_output(AT91_PIN_PE20, 1);		/* select spi0 clock */
- 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+	/* Touchscreen */
-+	ek_add_device_ts();
- 	/* MMC */
- 	at91_add_device_mmc(1, &ek_mmc_data);
-+	/* Ethernet */
-+	at91_add_device_eth(&ek_macb_data);
- 	/* NAND */
- 	at91_add_device_nand(&ek_nand_data);
-+	/* I2C */
-+	at91_add_device_i2c();
-+	/* LCD Controller */
-+	at91_add_device_lcdc(&ek_lcdc_data);
-+	/* AC97 */
-+	at91_add_device_ac97(&ek_ac97_data);
- }
- 
- MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/board-sam9rlek.c linux-2.6-stable/arch/arm/mach-at91/board-sam9rlek.c
---- linux-2.6.21/arch/arm/mach-at91/board-sam9rlek.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/board-sam9rlek.c	Wed May  9 10:58:34 2007
-@@ -0,0 +1,204 @@
-+/*
-+ *  Copyright (C) 2005 SAN People
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/fb.h>
-+#include <linux/clk.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91sam926x_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ *    0 .. 3 = USART0 .. USART3
-+ *    4      = DBGU
-+ */
-+static struct at91_uart_config __initdata ek_uart_config = {
-+	.console_tty	= 0,				/* ttyS0 */
-+	.nr_tty		= 2,
-+	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init ek_map_io(void)
-+{
-+	/* Initialize processor: 12.000 MHz crystal */
-+	at91sam9rl_initialize(12000000);
-+
-+	/* Setup the serial ports and console */
-+	at91_init_serial(&ek_uart_config);
-+}
-+
-+static void __init ek_init_irq(void)
-+{
-+	at91sam9rl_init_interrupts(NULL);
-+}
-+
-+
-+/*
-+ * MCI (SD/MMC)
-+ */
-+static struct at91_mmc_data __initdata ek_mmc_data = {
-+	.wire4		= 1,
-+	.det_pin	= AT91_PIN_PA15,
-+//	.wp_pin		= ... not connected
-+//	.vcc_pin	= ... not connected
-+};
-+
-+
-+/*
-+ * NAND flash
-+ */
-+static struct mtd_partition __initdata ek_nand_partition[] = {
-+	{
-+		.name	= "Partition 1",
-+		.offset	= 0,
-+		.size	= 256 * 1024,
-+	},
-+	{
-+		.name	= "Partition 2",
-+		.offset	= 256 * 1024 ,
-+		.size	= MTDPART_SIZ_FULL,
-+	},
-+};
-+
-+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
-+{
-+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-+	return ek_nand_partition;
-+}
-+
-+static struct at91_nand_data __initdata ek_nand_data = {
-+	.ale		= 21,
-+	.cle		= 22,
-+//	.det_pin	= ... not connected
-+	.rdy_pin	= AT91_PIN_PD17,
-+	.enable_pin	= AT91_PIN_PB6,
-+	.partition_info	= nand_partitions,
-+	.bus_width_16	= 0,
-+};
-+
-+
-+/*
-+ * SPI devices
-+ */
-+static struct spi_board_info ek_spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+		.bus_num	= 0,
-+	},
-+};
-+
-+
-+/*
-+ * LCD Controller
-+ */
-+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-+static struct fb_videomode at91_tft_vga_modes[] = {
-+	{
-+		.name		= "TX09D50VM1CCA @ 60",
-+		.refresh	= 60,
-+		.xres		= 240,		.yres		= 320,
-+		.pixclock	= KHZ2PICOS(4965),
-+
-+		.left_margin	= 1,		.right_margin	= 33,
-+		.upper_margin	= 1,		.lower_margin	= 0,
-+		.hsync_len	= 5,		.vsync_len	= 1,
-+
-+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-+		.vmode		= FB_VMODE_NONINTERLACED,
-+	},
-+};
-+
-+static struct fb_monspecs at91fb_default_monspecs = {
-+	.manufacturer	= "HIT",
-+	.monitor	= "TX09D50VM1CCA",
-+
-+	.modedb		= at91_tft_vga_modes,
-+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-+	.hfmin		= 15000,
-+	.hfmax		= 64000,
-+	.vfmin		= 50,
-+	.vfmax		= 150,
-+};
-+
-+#define AT91SAM9RL_DEFAULT_LCDCON2	(ATMEL_LCDC_MEMOR_LITTLE \
-+					| ATMEL_LCDC_DISTYPE_TFT \
-+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-+
-+static void at91_lcdc_power_control(int on)
-+{
-+	if (on)
-+		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
-+	else
-+		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
-+}
-+
-+/* Driver datas */
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
-+	.default_bpp			= 16,
-+	.default_dmacon			= ATMEL_LCDC_DMAEN,
-+	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
-+	.default_monspecs		= &at91fb_default_monspecs,
-+	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-+	.guard_time			= 1,
-+};
-+
-+#else
-+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
-+#endif
-+
-+
-+static void __init ek_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* I2C */
-+	at91_add_device_i2c();
-+	/* NAND */
-+	at91_add_device_nand(&ek_nand_data);
-+	/* SPI */
-+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-+	/* MMC */
-+	at91_add_device_mmc(0, &ek_mmc_data);
-+	/* LCD Controller */
-+	at91_add_device_lcdc(&ek_lcdc_data);
-+}
-+
-+MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-+	/* Maintainer: Atmel */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91sam926x_timer,
-+	.map_io		= ek_map_io,
-+	.init_irq	= ek_init_irq,
-+	.init_machine	= ek_board_init,
-+MACHINE_END
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/clock.c linux-2.6-stable/arch/arm/mach-at91/clock.c
---- linux-2.6.21/arch/arm/mach-at91/clock.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/clock.c	Tue May  8 12:13:30 2007
-@@ -32,6 +32,7 @@
- #include <asm/arch/cpu.h>
- 
- #include "clock.h"
-+#include "generic.h"
- 
- 
- /*
-@@ -254,6 +255,23 @@
- 
- /*------------------------------------------------------------------------*/
- 
-+#ifdef CONFIG_PM
-+
-+int clk_must_disable(struct clk *clk)
-+{
-+	if (!at91_suspend_entering_slow_clock())
-+		return 0;
-+
-+	while (clk->parent)
-+		clk = clk->parent;
-+	return clk != &clk32k;
-+}
-+EXPORT_SYMBOL(clk_must_disable);
-+
-+#endif
-+
-+/*------------------------------------------------------------------------*/
-+
- #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
- 
- /*
-@@ -375,6 +393,7 @@
- 	seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
- 
- 	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
-+#warning "Hard-coded PCK"
- 	for (i = 0; i < 4; i++)
- 		seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
- 	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/generic.h linux-2.6-stable/arch/arm/mach-at91/generic.h
---- linux-2.6.21/arch/arm/mach-at91/generic.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/generic.h	Wed May  9 10:20:54 2007
-@@ -13,12 +13,14 @@
- extern void __init at91sam9260_initialize(unsigned long main_clock);
- extern void __init at91sam9261_initialize(unsigned long main_clock);
- extern void __init at91sam9263_initialize(unsigned long main_clock);
-+extern void __init at91sam9rl_initialize(unsigned long main_clock);
- 
-  /* Interrupts */
- extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
- extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
-+extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
- extern void __init at91_aic_init(unsigned int priority[]);
- 
-  /* Timer */
-@@ -34,6 +36,7 @@
-  /* Power Management */
- extern void at91_irq_suspend(void);
- extern void at91_irq_resume(void);
-+extern int at91_suspend_entering_slow_clock(void);
- 
-  /* GPIO */
- #define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/ics1523.c linux-2.6-stable/arch/arm/mach-at91/ics1523.c
---- linux-2.6.21/arch/arm/mach-at91/ics1523.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/ics1523.c	Tue May  8 12:13:30 2007
-@@ -0,0 +1,207 @@
-+/*
-+ * arch/arm/mach-at91rm9200/ics1523.c
-+ *
-+ *  Copyright (C) 2003 ATMEL Rousset
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+
-+#include <asm/arch/ics1523.h>
-+#include <asm/arch/at91_twi.h>
-+#include <asm/arch/gpio.h>
-+
-+/* TWI Errors */
-+#define	AT91_TWI_ERROR	(AT91_TWI_NACK | AT91_TWI_UNRE | AT91_TWI_OVRE)
-+
-+
-+static void __iomem *twi_base;
-+
-+#define at91_twi_read(reg)		__raw_readl(twi_base + (reg))
-+#define at91_twi_write(reg, val)	__raw_writel((val), twi_base + (reg))
-+
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of TWI CLOCK
-+ * ----------------------------------------------------------------------------- */
-+
-+static void at91_ics1523_SetTwiClock(unsigned int mck_khz)
-+{
-+	int sclock;
-+
-+	/* Here, CKDIV = 1 and CHDIV = CLDIV  ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
-+	sclock = (10*mck_khz / ICS_TRANSFER_RATE);
-+	if (sclock % 10 >= 5)
-+		sclock = (sclock /10) - 5;
-+	else
-+		sclock = (sclock /10)- 6;
-+	sclock = (sclock + (4 - sclock %4)) >> 2;	/* div 4 */
-+
-+	at91_twi_write(AT91_TWI_CWGR, 0x00010000 | sclock | (sclock << 8));
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Read a byte with TWI Interface from the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_ReadByte(unsigned char reg_address, unsigned char *data_in)
-+{
-+	int Status, nb_trial;
-+
-+	at91_twi_write(AT91_TWI_MMR, AT91_TWI_MREAD | AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+	at91_twi_write(AT91_TWI_IADR, reg_address);
-+	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+	/* Program temporizing period (300us) */
-+	udelay(300);
-+
-+	/* Wait TXcomplete ... */
-+	nb_trial = 0;
-+	Status = at91_twi_read(AT91_TWI_SR);
-+	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+		nb_trial++;
-+		Status = at91_twi_read(AT91_TWI_SR);
-+	}
-+
-+	if (Status & AT91_TWI_TXCOMP) {
-+		*data_in = (unsigned char) at91_twi_read(AT91_TWI_RHR);
-+		return ICS1523_ACCESS_OK;
-+	}
-+	else
-+		return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Write a byte with TWI Interface to the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+static int at91_ics1523_WriteByte(unsigned char reg_address, unsigned char data_out)
-+{
-+	int Status, nb_trial;
-+
-+	at91_twi_write(AT91_TWI_MMR, AT91_TWI_IADRSZ_1 | ((ICS_ADDR << 16) & AT91_TWI_DADR));
-+	at91_twi_write(AT91_TWI_IADR, reg_address);
-+	at91_twi_write(AT91_TWI_THR, data_out);
-+	at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+	/* Program temporizing period (300us) */
-+	udelay(300);
-+
-+	nb_trial = 0;
-+	Status = at91_twi_read(AT91_TWI_SR);
-+	while (!(Status & AT91_TWI_TXCOMP) && (nb_trial < 10)) {
-+		nb_trial++;
-+		if (Status & AT91_TWI_ERROR) {
-+			/* If Underrun OR NACK - Start again */
-+			at91_twi_write(AT91_TWI_CR, AT91_TWI_START | AT91_TWI_STOP);
-+
-+			/*  Program temporizing period (300us) */
-+			udelay(300);
-+		}
-+		Status = at91_twi_read(AT91_TWI_SR);
-+	};
-+
-+	if (Status & AT91_TWI_TXCOMP)
-+		return ICS1523_ACCESS_OK;
-+	else
-+		return ICS1523_ACCESS_ERROR;
-+}
-+
-+/* -----------------------------------------------------------------------------
-+ * Initialization of the Clock Generator ICS1523
-+ * ----------------------------------------------------------------------------- */
-+
-+int at91_ics1523_init(void)
-+{
-+	int		nb_trial;
-+	int		ack = ICS1523_ACCESS_OK;
-+	unsigned int	status = 0xffffffff;
-+	struct clk	*twi_clk;
-+
-+	/* Map in TWI peripheral */
-+	twi_base = ioremap(AT91RM9200_BASE_TWI, SZ_16K);
-+	if (!twi_base)
-+		return -ENOMEM;
-+
-+	/* pins used for TWI interface */
-+	at91_set_A_periph(AT91_PIN_PA25, 0);            /* TWD */
-+	at91_set_multi_drive(AT91_PIN_PA25, 1);
-+	at91_set_A_periph(AT91_PIN_PA26, 0);            /* TWCK */
-+	at91_set_multi_drive(AT91_PIN_PA26, 1);
-+
-+	/* Enable the TWI clock */
-+	twi_clk = clk_get(NULL, "twi_clk");
-+	if (IS_ERR(twi_clk))
-+		return ICS1523_ACCESS_ERROR;
-+	clk_enable(twi_clk);
-+
-+	/* Disable interrupts */
-+	at91_twi_write(AT91_TWI_IDR, -1);
-+
-+	/* Reset peripheral */
-+	at91_twi_write(AT91_TWI_CR, AT91_TWI_SWRST);
-+
-+	/* Set Master mode */
-+	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);
-+
-+	/* Set TWI Clock Waveform Generator Register */
-+	at91_ics1523_SetTwiClock(60000);     /* MCK in KHz = 60000 KHz */
-+
-+	/* ICS1523 Initialisation */
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) 0);
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OE, (unsigned char) (ICS_OEF | ICS_OET2 | ICS_OETCK));
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_OD, (unsigned char) (ICS_INSEL | 0x7F));
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0);
-+
-+	nb_trial = 0;
-+	do {
-+		nb_trial++;
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_ICR, (unsigned char) (ICS_ENDLS | ICS_ENPLS | ICS_PDEN /*| ICS_FUNCSEL*/));
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_LCR, (unsigned char) (ICS_PSD | ICS_PFD));
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD0, (unsigned char) 0x39) ; /* 0x7A */
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_FD1, (unsigned char) 0x00);
-+		ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_PLLR));
-+
-+		/* Program 1ms temporizing period */
-+		mdelay(1);
-+
-+		at91_ics1523_ReadByte ((unsigned char) ICS_SR, (char *)&status);
-+	} while (!((unsigned int) status & (unsigned int) ICS_PLLLOCK) && (nb_trial < 10));
-+
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAC, (unsigned char) 0x03) ; /* 0x01 */
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_SWRST, (unsigned char) (ICS_DPAR));
-+
-+	/* Program 1ms temporizing period */
-+	mdelay(1);
-+
-+	ack |= at91_ics1523_WriteByte ((unsigned char) ICS_DPAO, (unsigned char) 0x00);
-+
-+	/* Program 1ms temporizing period */
-+	mdelay(1);
-+	
-+	/* All done - cleanup */
-+	iounmap(twi_base);
-+	clk_disable(twi_clk);
-+	clk_put(twi_clk);
-+
-+	return ack;
-+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/pm.c linux-2.6-stable/arch/arm/mach-at91/pm.c
---- linux-2.6.21/arch/arm/mach-at91/pm.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mach-at91/pm.c	Tue May  8 12:13:31 2007
-@@ -63,6 +63,7 @@
-  * Verify that all the clocks are correct before entering
-  * slow-clock mode.
-  */
-+#warning "SAM9260 only has 3 programmable clocks."
- static int at91_pm_verify_clocks(void)
- {
- 	unsigned long scsr;
-@@ -104,20 +105,15 @@
- }
- 
- /*
-- * Call this from platform driver suspend() to see how deeply to suspend.
-+ * This is called from clk_must_disable(), to see how deeply to suspend.
-  * For example, some controllers (like OHCI) need one of the PLL clocks
-  * in order to act as a wakeup source, and those are not available when
-  * going into slow clock mode.
-- *
-- * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
-- * the very same problem (but not using at91 main_clk), and it'd be better
-- * to add one generic API rather than lots of platform-specific ones.
-  */
- int at91_suspend_entering_slow_clock(void)
- {
- 	return (target_state == PM_SUSPEND_MEM);
- }
--EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
- 
- 
- static void (*slow_clock)(void);
-@@ -207,16 +203,23 @@
- 	.enter		= at91_pm_enter,
- };
- 
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+extern void at91rm9200_slow_clock(void);
-+extern u32 at91rm9200_slow_clock_sz;
-+#endif
-+
- static int __init at91_pm_init(void)
- {
--	printk("AT91: Power Management\n");
--
--#ifdef CONFIG_AT91_PM_SLOW_CLOCK
--	/* REVISIT allocations of SRAM should be dynamically managed.
-+#ifdef CONFIG_AT91_SLOW_CLOCK
-+	/*
-+	 * REVISIT allocations of SRAM should be dynamically managed.
- 	 * FIQ handlers and other components will want SRAM/TCM too...
- 	 */
--	slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
-+	slow_clock = (void *) (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE + (3 * SZ_4K));
- 	memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
-+	printk("AT91: Power Management (with slow clock mode)\n");
-+#else
-+	printk("AT91: Power Management\n");
- #endif
- 
- 	/* Disable SDRAM low-power mode.  Cannot be used with self-refresh. */
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/pm_slowclock.S linux-2.6-stable/arch/arm/mach-at91/pm_slowclock.S
---- linux-2.6.21/arch/arm/mach-at91/pm_slowclock.S	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/pm_slowclock.S	Tue May  8 12:13:31 2007
-@@ -0,0 +1,172 @@
-+/*
-+ * arch/arm/mach-at91/pm_slow_clock.S
-+ *
-+ *  Copyright (C) 2006 Savin Zlobec
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/hardware.h>
-+#include <asm/arch/at91_pmc.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#define MCKRDY_TIMEOUT		1000
-+#define MOSCRDY_TIMEOUT 	1000
-+#define PLLALOCK_TIMEOUT	1000
-+
-+	.macro wait_mckrdy
-+	mov	r2, #MCKRDY_TIMEOUT
-+1:	sub	r2, r2, #1
-+	cmp	r2, #0
-+	beq	2f
-+	ldr	r3, [r1, #AT91_PMC_SR]
-+	tst	r3, #AT91_PMC_MCKRDY
-+	beq	1b
-+2:
-+	.endm
-+
-+	.macro wait_moscrdy
-+	mov	r2, #MOSCRDY_TIMEOUT
-+1:	sub	r2, r2, #1
-+	cmp	r2, #0
-+	beq	2f
-+	ldr	r3, [r1, #AT91_PMC_SR]
-+	tst	r3, #AT91_PMC_MOSCS
-+	beq	1b
-+2:
-+	.endm
-+
-+	.macro wait_pllalock
-+	mov	r2, #PLLALOCK_TIMEOUT
-+1:	sub	r2, r2, #1
-+	cmp	r2, #0
-+	beq	2f
-+	ldr	r3, [r1, #AT91_PMC_SR]
-+	tst	r3, #AT91_PMC_LOCKA
-+	beq	1b
-+2:
-+	.endm
-+
-+	.macro wait_plladis
-+	mov	r2, #PLLALOCK_TIMEOUT
-+1:	sub	r2, r2, #1
-+	cmp	r2, #0
-+	beq	2f
-+	ldr	r3, [r1, #AT91_PMC_SR]
-+	tst	r3, #AT91_PMC_LOCKA
-+	bne	1b
-+2:
-+	.endm
-+
-+	.text
-+
-+ENTRY(at91rm9200_slow_clock)
-+
-+	ldr	r1, .at91_va_base_sys
-+
-+	/* Put SDRAM in self refresh mode */
-+
-+	b	1f
-+	.align	5
-+1:	mcr	p15, 0, r0, c7, c10, 4
-+	mov	r2, #1
-+	str	r2, [r1, #AT91_SDRAMC_SRR]
-+
-+	/* Save Master clock setting */
-+
-+	ldr	r2, [r1, #AT91_PMC_MCKR]
-+	str	r2, .saved_mckr
-+
-+	/*
-+	 * Set the Master clock source to slow clock
-+	 *
-+	 * First set the CSS field, wait for MCKRDY
-+	 * and than set the PRES and MDIV fields.
-+	 *
-+	 * See eratta #2[78] for details.
-+	 */
-+
-+	bic	r2, r2, #3
-+	str	r2, [r1, #AT91_PMC_MCKR]
-+
-+	wait_mckrdy
-+
-+	mov	r2, #0
-+	str	r2, [r1, #AT91_PMC_MCKR]
-+
-+	/* Save PLLA setting and disable it */
-+
-+	ldr	r2, [r1, #AT91_CKGR_PLLAR]
-+	str	r2, .saved_pllar
-+
-+	mov	r2, #0
-+	str	r2, [r1, #AT91_CKGR_PLLAR]
-+
-+	wait_plladis
-+
-+	/* Turn off the main oscillator */
-+
-+	ldr	r2, [r1, #AT91_CKGR_MOR]
-+	bic	r2, r2, #AT91_PMC_MOSCEN
-+	str	r2, [r1, #AT91_CKGR_MOR]
-+
-+	/* Wait for interrupt */
-+
-+	mcr	p15, 0, r0, c7, c0, 4
-+
-+	/* Turn on the main oscillator */
-+
-+	ldr	r2, [r1, #AT91_CKGR_MOR]
-+	orr	r2, r2, #AT91_PMC_MOSCEN
-+	str	r2, [r1, #AT91_CKGR_MOR]
-+
-+	wait_moscrdy
-+
-+	/* Restore PLLA setting */
-+
-+	ldr	r2, .saved_pllar
-+	str	r2, [r1, #AT91_CKGR_PLLAR]
-+
-+	wait_pllalock
-+
-+	/*
-+	 * Restore master clock setting
-+	 *
-+	 * First set PRES if it was not 0,
-+	 * than set CSS and MDIV fields.
-+	 * After every change wait for
-+	 * MCKRDY.
-+	 *
-+	 * See eratta #2[78] for details.
-+	 */
-+
-+	ldr	r2, .saved_mckr
-+	tst	r2, #0x1C
-+	beq	2f
-+	and	r2, r2, #0x1C
-+	str	r2, [r1, #AT91_PMC_MCKR]
-+
-+	wait_mckrdy
-+
-+2:	ldr	r2, .saved_mckr
-+	str	r2, [r1, #AT91_PMC_MCKR]
-+
-+	wait_mckrdy
-+
-+	mov	pc, lr
-+
-+.saved_mckr:
-+	.word 0
-+
-+.saved_pllar:
-+	.word 0
-+
-+.at91_va_base_sys:
-+	.word AT91_VA_BASE_SYS
-+
-+ENTRY(at91rm9200_slow_clock_sz)
-+	.word .-at91rm9200_slow_clock
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/tclib.c linux-2.6-stable/arch/arm/mach-at91/tclib.c
---- linux-2.6.21/arch/arm/mach-at91/tclib.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/tclib.c	Tue May  8 12:13:31 2007
-@@ -0,0 +1,17 @@
-+#include <linux/clk.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+
-+#include "tclib.h"
-+
-+static struct atmel_tcblock *blocks;
-+static int nblocks;
-+
-+/*
-+ * Called from the processor-specific init to register the TC Blocks.
-+ */
-+void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n)
-+{
-+	blocks = tcblocks;
-+	nblocks = n;
-+}
-diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/tclib.h linux-2.6-stable/arch/arm/mach-at91/tclib.h
---- linux-2.6.21/arch/arm/mach-at91/tclib.h	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/arch/arm/mach-at91/tclib.h	Tue May  8 12:13:31 2007
-@@ -0,0 +1,11 @@
-+
-+#define TC_PER_TCB	3
-+
-+struct atmel_tcblock {
-+	u32 		physaddr;
-+	void __iomem	*ioaddr;
-+	struct clk	*clk[TC_PER_TCB];
-+	int		irq[TC_PER_TCB];
-+};
-+
-+extern void __init atmel_tc_init(struct atmel_tcblock *tcblocks, int n);
-diff -urN -x CVS linux-2.6.21/arch/arm/mm/Kconfig linux-2.6-stable/arch/arm/mm/Kconfig
---- linux-2.6.21/arch/arm/mm/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/mm/Kconfig	Wed May  9 10:20:54 2007
-@@ -171,8 +171,8 @@
- # ARM926T
- config CPU_ARM926T
- 	bool "Support ARM926T processor"
--	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
--	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
-+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX
-+	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_NS9XXX
- 	select CPU_32v5
- 	select CPU_ABRT_EV5TJ
- 	select CPU_CACHE_VIVT
-diff -urN -x CVS linux-2.6.21/arch/arm/tools/mach-types linux-2.6-stable/arch/arm/tools/mach-types
---- linux-2.6.21/arch/arm/tools/mach-types	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/arch/arm/tools/mach-types	Tue May  8 12:13:31 2007
-@@ -1335,3 +1335,32 @@
- comtech_router		MACH_COMTECH_ROUTER	COMTECH_ROUTER		1327
- sbc2410x		MACH_SBC2410X		SBC2410X		1328
- at4x0bd			MACH_AT4X0BD		AT4X0BD			1329
-+cbifr			MACH_CBIFR		CBIFR			1330
-+arcom_quantum		MACH_ARCOM_QUANTUM	ARCOM_QUANTUM		1331
-+matrix520		MACH_MATRIX520		MATRIX520		1332
-+matrix510		MACH_MATRIX510		MATRIX510		1333
-+matrix500		MACH_MATRIX500		MATRIX500		1334
-+m501			MACH_M501		M501			1335
-+aaeon1270		MACH_AAEON1270		AAEON1270		1336
-+matrix500ev		MACH_MATRIX500EV	MATRIX500EV		1337
-+pac500			MACH_PAC500		PAC500			1338
-+pnx8181			MACH_PNX8181		PNX8181			1339
-+colibri320		MACH_COLIBRI320		COLIBRI320		1340
-+aztoolbb		MACH_AZTOOLBB		AZTOOLBB		1341
-+aztoolg2		MACH_AZTOOLG2		AZTOOLG2		1342
-+dvlhost			MACH_DVLHOST		DVLHOST			1343
-+zir9200			MACH_ZIR9200		ZIR9200			1344
-+zir9260			MACH_ZIR9260		ZIR9260			1345
-+cocopah			MACH_COCOPAH		COCOPAH			1346
-+nds			MACH_NDS		NDS			1347
-+rosencrantz		MACH_ROSENCRANTZ	ROSENCRANTZ		1348
-+fttx_odsc		MACH_FTTX_ODSC		FTTX_ODSC		1349
-+classe_r6904		MACH_CLASSE_R6904	CLASSE_R6904		1350
-+cam60			MACH_CAM60		CAM60			1351
-+mxc30031ads		MACH_MXC30031ADS	MXC30031ADS		1352
-+datacall		MACH_DATACALL		DATACALL		1353
-+at91eb01		MACH_AT91EB01		AT91EB01		1354
-+rty			MACH_RTY		RTY			1355
-+dwl2100			MACH_DWL2100		DWL2100			1356
-+vinsi			MACH_VINSI		VINSI			1357
-+db88f5281		MACH_DB88F5281		DB88F5281		1358
-diff -urN -x CVS linux-2.6.21/drivers/char/Kconfig linux-2.6-stable/drivers/char/Kconfig
---- linux-2.6.21/drivers/char/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/char/Kconfig	Tue May  8 14:31:24 2007
-@@ -1071,5 +1071,21 @@
- 	  /sys/devices/platform/telco_clock, with a number of files for
- 	  controlling the behavior of this hardware.
- 
-+config AT91_SPI
-+	bool "SPI driver (legacy) for AT91RM9200 processors"
-+	depends on ARCH_AT91RM9200
-+	default y
-+	help
-+	  The SPI driver gives access to this serial bus on the AT91RM9200
-+	  processor.
-+
-+config AT91_SPIDEV
-+	bool "SPI device interface (legacy) for AT91RM9200 processors"
-+	depends on ARCH_AT91RM9200 && AT91_SPI
-+	default n
-+	help
-+	  The SPI driver gives user mode access to this serial
-+	  bus on the AT91RM9200 processor.
-+
- endmenu
- 
-diff -urN -x CVS linux-2.6.21/drivers/char/Makefile linux-2.6-stable/drivers/char/Makefile
---- linux-2.6.21/drivers/char/Makefile	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/char/Makefile	Tue May  8 14:31:24 2007
-@@ -93,6 +93,8 @@
- obj-$(CONFIG_GPIO_VR41XX)	+= vr41xx_giu.o
- obj-$(CONFIG_TANBAC_TB0219)	+= tb0219.o
- obj-$(CONFIG_TELCLOCK)		+= tlclk.o
-+obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
-+obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
- 
- obj-$(CONFIG_WATCHDOG)		+= watchdog/
- obj-$(CONFIG_MWAVE)		+= mwave/
-diff -urN -x CVS linux-2.6.21/drivers/char/at91_spi.c linux-2.6-stable/drivers/char/at91_spi.c
---- linux-2.6.21/drivers/char/at91_spi.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/char/at91_spi.c	Tue May  8 14:31:24 2007
-@@ -0,0 +1,336 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
-+ *
-+ *  Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/module.h>
-+#include <linux/sched.h>
-+#include <linux/completion.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <linux/atmel_pdc.h>
-+#include <asm/io.h>
-+#include <asm/semaphore.h>
-+
-+#include <asm/arch/at91_spi.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_SPI
-+
-+static struct spi_local spi_dev[NR_SPI_DEVICES];	/* state of the SPI devices */
-+static int spi_enabled = 0;
-+static struct semaphore spi_lock;			/* protect access to SPI bus */
-+static int current_device = -1;				/* currently selected SPI device */
-+static struct clk *spi_clk;				/* SPI clock */
-+static void __iomem *spi_base;				/* SPI peripheral base-address */
-+
-+DECLARE_COMPLETION(transfer_complete);
-+
-+
-+#define at91_spi_read(reg)		__raw_readl(spi_base + (reg))
-+#define at91_spi_write(reg, val)	__raw_writel((val), spi_base + (reg))
-+
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Access and enable the SPI bus.
-+ * This MUST be called before any transfers are performed.
-+ */
-+void spi_access_bus(short device)
-+{
-+	/* Ensure that requested device is valid */
-+	if ((device < 0) || (device >= NR_SPI_DEVICES))
-+		panic("at91_spi: spi_access_bus called with invalid device");
-+
-+	if (spi_enabled == 0) {
-+		clk_enable(spi_clk);				/* Enable Peripheral clock */
-+		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);	/* Enable SPI */
-+#ifdef DEBUG_SPI
-+		printk("SPI on\n");
-+#endif
-+	}
-+	spi_enabled++;
-+
-+	/* Lock the SPI bus */
-+	down(&spi_lock);
-+	current_device = device;
-+
-+	/* Configure SPI bus for device */
-+	at91_spi_write(AT91_SPI_MR, AT91_SPI_MSTR | AT91_SPI_MODFDIS | (spi_dev[device].pcs << 16));
-+}
-+
-+/*
-+ * Relinquish control of the SPI bus.
-+ */
-+void spi_release_bus(short device)
-+{
-+	if (device != current_device)
-+		panic("at91_spi: spi_release called with invalid device");
-+
-+	/* Release the SPI bus */
-+	current_device = -1;
-+	up(&spi_lock);
-+
-+	spi_enabled--;
-+	if (spi_enabled == 0) {
-+		at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);	/* Disable SPI */
-+		clk_disable(spi_clk);				/* Disable Peripheral clock */
-+#ifdef DEBUG_SPI
-+		printk("SPI off\n");
-+#endif
-+	}
-+}
-+
-+/*
-+ * Perform a data transfer over the SPI bus
-+ */
-+int spi_transfer(struct spi_transfer_list* list)
-+{
-+	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+	int tx_size;
-+
-+	if (!list)
-+		panic("at91_spi: spi_transfer called with NULL transfer list");
-+	if (current_device == -1)
-+		panic("at91_spi: spi_transfer called without acquiring bus");
-+
-+#ifdef DEBUG_SPI
-+	printk("SPI transfer start [%i]\n", list->nr_transfers);
-+#endif
-+
-+	/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+	tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+	/* Store transfer list */
-+	device->xfers = list;
-+	list->curr = 0;
-+
-+	/* Assume there must be at least one transfer */
-+	device->tx = dma_map_single(NULL, list->tx[0], list->txlen[0], DMA_TO_DEVICE);
-+	device->rx = dma_map_single(NULL, list->rx[0], list->rxlen[0], DMA_FROM_DEVICE);
-+
-+	/* Program PDC registers */
-+	at91_spi_write(ATMEL_PDC_TPR, device->tx);
-+	at91_spi_write(ATMEL_PDC_RPR, device->rx);
-+	at91_spi_write(ATMEL_PDC_TCR, list->txlen[0] / tx_size);
-+	at91_spi_write(ATMEL_PDC_RCR, list->rxlen[0] / tx_size);
-+
-+	/* Is there a second transfer? */
-+	if (list->nr_transfers > 1) {
-+		device->txnext = dma_map_single(NULL, list->tx[1], list->txlen[1], DMA_TO_DEVICE);
-+		device->rxnext = dma_map_single(NULL, list->rx[1], list->rxlen[1], DMA_FROM_DEVICE);
-+
-+		/* Program Next PDC registers */
-+		at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+		at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+		at91_spi_write(ATMEL_PDC_TNCR, list->txlen[1] / tx_size);
-+		at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[1] / tx_size);
-+	}
-+	else {
-+		device->txnext = 0;
-+		device->rxnext = 0;
-+		at91_spi_write(ATMEL_PDC_TNCR, 0);
-+		at91_spi_write(ATMEL_PDC_RNCR, 0);
-+	}
-+
-+	// TODO: If we are doing consecutive transfers (at high speed, or
-+	//   small buffers), then it might be worth modifying the 'Delay between
-+	//   Consecutive Transfers' in the CSR registers.
-+	//   This is an issue if we cannot chain the next buffer fast enough
-+	//   in the interrupt handler.
-+
-+	/* Enable transmitter and receiver */
-+	at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN | ATMEL_PDC_TXTEN);
-+
-+	at91_spi_write(AT91_SPI_IER, AT91_SPI_ENDRX);		/* enable buffer complete interrupt */
-+	wait_for_completion(&transfer_complete);
-+
-+#ifdef DEBUG_SPI
-+	printk("SPI transfer end\n");
-+#endif
-+
-+	return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Handle interrupts from the SPI controller.
-+ */
-+static irqreturn_t at91spi_interrupt(int irq, void *dev_id)
-+{
-+	unsigned int status;
-+	struct spi_local *device = (struct spi_local *) &spi_dev[current_device];
-+	struct spi_transfer_list *list = device->xfers;
-+
-+#ifdef DEBUG_SPI
-+	printk("SPI interrupt %i\n", current_device);
-+#endif
-+
-+	if (!list)
-+		panic("at91_spi: spi_interrupt with a NULL transfer list");
-+
-+		status = at91_spi_read(AT91_SPI_SR) & at91_spi_read(AT91_SPI_IMR);	/* read status */
-+
-+	dma_unmap_single(NULL, device->tx, list->txlen[list->curr], DMA_TO_DEVICE);
-+	dma_unmap_single(NULL, device->rx, list->rxlen[list->curr], DMA_FROM_DEVICE);
-+
-+	device->tx = device->txnext;	/* move next transfer to current transfer */
-+	device->rx = device->rxnext;
-+
-+	list->curr = list->curr + 1;
-+	if (list->curr == list->nr_transfers) {		/* all transfers complete */
-+		at91_spi_write(AT91_SPI_IDR, AT91_SPI_ENDRX);		/* disable interrupt */
-+
-+		/* Disable transmitter and receiver */
-+		at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+		device->xfers = NULL;
-+		complete(&transfer_complete);
-+	}
-+	else if (list->curr+1 == list->nr_transfers) {	/* no more next transfers */
-+		device->txnext = 0;
-+		device->rxnext = 0;
-+		at91_spi_write(ATMEL_PDC_TNCR, 0);
-+		at91_spi_write(ATMEL_PDC_RNCR, 0);
-+	}
-+	else {
-+		int i = (list->curr)+1;
-+
-+		/* If we are in 16-bit mode, we need to modify what we pass to the PDC */
-+		int tx_size = (at91_spi_read(AT91_SPI_CSR(current_device)) & AT91_SPI_BITS_16) ? 2 : 1;
-+
-+		device->txnext = dma_map_single(NULL, list->tx[i], list->txlen[i], DMA_TO_DEVICE);
-+		device->rxnext = dma_map_single(NULL, list->rx[i], list->rxlen[i], DMA_FROM_DEVICE);
-+		at91_spi_write(ATMEL_PDC_TNPR, device->txnext);
-+		at91_spi_write(ATMEL_PDC_RNPR, device->rxnext);
-+		at91_spi_write(ATMEL_PDC_TNCR, list->txlen[i] / tx_size);
-+		at91_spi_write(ATMEL_PDC_RNCR, list->rxlen[i] / tx_size);
-+	}
-+	return IRQ_HANDLED;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize the SPI controller
-+ */
-+static int __init at91spi_probe(struct platform_device *pdev)
-+{
-+	int i;
-+	unsigned long scbr;
-+	struct resource *res;
-+
-+	init_MUTEX(&spi_lock);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res)
-+		return -ENXIO;
-+
-+	if (!request_mem_region(res->start, res->end - res->start + 1, "at91_spi"))
-+		return -EBUSY;
-+
-+	spi_base = ioremap(res->start, res->end - res->start + 1);
-+	if (!spi_base) {
-+		release_mem_region(res->start, res->end - res->start + 1);
-+		return -ENOMEM;
-+	}
-+
-+	spi_clk = clk_get(NULL, "spi_clk");
-+	if (IS_ERR(spi_clk)) {
-+		printk(KERN_ERR "at91_spi: no clock defined\n");
-+		iounmap(spi_base);
-+		release_mem_region(res->start, res->end - res->start + 1);
-+		return -ENODEV;
-+	}
-+
-+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SWRST);	/* software reset of SPI controller */
-+
-+	/*
-+	 * Calculate the correct SPI baud-rate divisor.
-+	 */
-+	scbr = clk_get_rate(spi_clk) / (2 * DEFAULT_SPI_CLK);
-+	scbr = scbr + 1;		/* round up */
-+
-+	printk(KERN_INFO "at91_spi: Baud rate set to %ld\n", clk_get_rate(spi_clk) / (2 * scbr));
-+
-+	/* Set Chip Select registers to good defaults */
-+	for (i = 0; i < 4; i++) {
-+		at91_spi_write(AT91_SPI_CSR(i), AT91_SPI_CPOL | AT91_SPI_BITS_8 | (16 << 16) | (scbr << 8));
-+	}
-+
-+	at91_spi_write(ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+	memset(&spi_dev, 0, sizeof(spi_dev));
-+	spi_dev[0].pcs = 0xE;
-+	spi_dev[1].pcs = 0xD;
-+	spi_dev[2].pcs = 0xB;
-+	spi_dev[3].pcs = 0x7;
-+
-+	if (request_irq(AT91RM9200_ID_SPI, at91spi_interrupt, 0, "spi", NULL)) {
-+		clk_put(spi_clk);
-+		iounmap(spi_base);
-+		release_mem_region(res->start, res->end - res->start + 1);
-+		return -EBUSY;
-+	}
-+
-+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIEN);		/* Enable SPI */
-+
-+	return 0;
-+}
-+
-+static int __devexit at91spi_remove(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+
-+	at91_spi_write(AT91_SPI_CR, AT91_SPI_SPIDIS);		/* Disable SPI */
-+	clk_put(spi_clk);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	iounmap(spi_base);
-+	release_mem_region(res->start, res->end - res->start + 1);
-+
-+	free_irq(AT91RM9200_ID_SPI, 0);
-+	return 0;
-+}
-+
-+static struct platform_driver at91spi_driver = {
-+	.probe		= at91spi_probe,
-+	.remove		= __devexit_p(at91spi_remove),
-+	.driver		= {
-+		.name	= "at91_spi",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at91spi_init(void)
-+{
-+	return platform_driver_register(&at91spi_driver);
-+}
-+
-+static void __exit at91spi_exit(void)
-+{
-+	platform_driver_unregister(&at91spi_driver);
-+}
-+
-+EXPORT_SYMBOL(spi_access_bus);
-+EXPORT_SYMBOL(spi_release_bus);
-+EXPORT_SYMBOL(spi_transfer);
-+
-+module_init(at91spi_init);
-+module_exit(at91spi_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.21/drivers/char/at91_spidev.c linux-2.6-stable/drivers/char/at91_spidev.c
---- linux-2.6.21/drivers/char/at91_spidev.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/char/at91_spidev.c	Tue May  8 14:31:24 2007
-@@ -0,0 +1,236 @@
-+/*
-+ * User-space interface to the SPI bus on Atmel AT91RM9200
-+ *
-+ *  Copyright (C) 2003 SAN People (Pty) Ltd
-+ *
-+ * Based on SPI driver by Rick Bronson
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/highmem.h>
-+#include <linux/pagemap.h>
-+#include <asm/arch/spi.h>
-+
-+#ifdef CONFIG_DEVFS_FS
-+#include <linux/devfs_fs_kernel.h>
-+#endif
-+
-+
-+#undef DEBUG_SPIDEV
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Read or Write to SPI bus.
-+ */
-+static ssize_t spidev_rd_wr(struct file *file, char *buf, size_t count, loff_t *offset)
-+{
-+	unsigned int spi_device = (unsigned int) file->private_data;
-+
-+	struct mm_struct * mm;
-+	struct page ** maplist;
-+	struct spi_transfer_list* list;
-+	int    pgcount;
-+
-+	unsigned int ofs, pagelen;
-+	int res, i, err;
-+
-+	if (!count) {
-+		return 0;
-+	}
-+
-+	list = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+	if (!list) {
-+		return -ENOMEM;
-+	}
-+
-+	mm = current->mm;
-+
-+	pgcount = ((unsigned long)buf+count+PAGE_SIZE-1)/PAGE_SIZE - (unsigned long)buf/PAGE_SIZE;
-+
-+	if (pgcount >= MAX_SPI_TRANSFERS) {
-+		kfree(list);
-+		return -EFBIG;
-+	}
-+
-+	maplist = kmalloc (pgcount * sizeof (struct page *), GFP_KERNEL);
-+
-+	if (!maplist) {
-+		kfree(list);
-+		return -ENOMEM;
-+	}
-+	flush_cache_all();
-+	down_read(&mm->mmap_sem);
-+	err= get_user_pages(current, mm, (unsigned long)buf, pgcount, 1, 0, maplist, NULL);
-+	up_read(&mm->mmap_sem);
-+
-+	if (err < 0) {
-+		kfree(list);
-+		kfree(maplist);
-+		return err;
-+	}
-+	pgcount = err;
-+
-+#ifdef DEBUG_SPIDEV
-+	printk("spidev_rd_rw: %i %i\n", count, pgcount);
-+#endif
-+
-+	/* Set default return value = transfer length */
-+	res = count;
-+
-+	/*
-+	 * At this point, the virtual area buf[0] .. buf[count-1] will have
-+	 * corresponding pages mapped in the physical memory and locked until
-+	 * we unmap the kiobuf.  The pages cannot be swapped out or moved
-+	 * around.
-+	 */
-+	ofs = (unsigned long) buf & (PAGE_SIZE -1);
-+	pagelen = PAGE_SIZE - ofs;
-+	if (count < pagelen)
-+		pagelen = count;
-+
-+	for (i = 0; i < pgcount; i++) {
-+		flush_dcache_page(maplist[i]);
-+
-+		list->tx[i] = list->rx[i] = page_address(maplist[i]) + ofs;
-+		list->txlen[i] = list->rxlen[i] = pagelen;
-+
-+#ifdef DEBUG_SPIDEV
-+		printk("  %i: %x  (%i)\n", i, list->tx[i], list->txlen[i]);
-+#endif
-+
-+		ofs = 0;	/* all subsequent transfers start at beginning of a page */
-+		count = count - pagelen;
-+		pagelen = (count < PAGE_SIZE) ? count : PAGE_SIZE;
-+	}
-+	list->nr_transfers = pgcount;
-+
-+	/* Perform transfer on SPI bus */
-+	spi_access_bus(spi_device);
-+	spi_transfer(list);
-+	spi_release_bus(spi_device);
-+
-+	while (pgcount--) {
-+		page_cache_release (maplist[pgcount]);
-+	}
-+	flush_cache_all();
-+
-+	kfree(maplist);
-+	kfree(list);
-+
-+	return res;
-+}
-+
-+static int spidev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+	int spi_device = MINOR(inode->i_rdev);
-+
-+	if (spi_device >= NR_SPI_DEVICES)
-+		return -ENODEV;
-+
-+	// TODO: This interface can be used to configure the SPI bus.
-+	// Configurable options could include: Speed, Clock Polarity, Clock Phase
-+
-+	switch(cmd) {
-+		default:
-+			return -ENOIOCTLCMD;
-+	}
-+}
-+
-+/*
-+ * Open the SPI device
-+ */
-+static int spidev_open(struct inode *inode, struct file *file)
-+{
-+	unsigned int spi_device = MINOR(inode->i_rdev);
-+
-+	if (spi_device >= NR_SPI_DEVICES)
-+		return -ENODEV;
-+
-+	/*
-+	 * 'private_data' is actually a pointer, but we overload it with the
-+	 * value we want to store.
-+	 */
-+	file->private_data = (void *)spi_device;
-+
-+	return 0;
-+}
-+
-+/*
-+ * Close the SPI device
-+ */
-+static int spidev_close(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+/* ......................................................................... */
-+
-+static struct file_operations spidev_fops = {
-+	.owner		= THIS_MODULE,
-+	.llseek		= no_llseek,
-+	.read		= spidev_rd_wr,
-+	.write		= (int (*) (struct file *file, const char *buf, size_t count, loff_t *offset))spidev_rd_wr,
-+	.ioctl		= spidev_ioctl,
-+	.open		= spidev_open,
-+	.release	= spidev_close,
-+};
-+
-+/*
-+ * Install the SPI /dev interface driver
-+ */
-+static int __init at91_spidev_init(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+	int i;
-+#endif
-+
-+	if (register_chrdev(SPI_MAJOR, "spi", &spidev_fops)) {
-+		printk(KERN_ERR "at91_spidev: Unable to get major %d for SPI bus\n", SPI_MAJOR);
-+		return -EIO;
-+	}
-+
-+#ifdef CONFIG_DEVFS_FS
-+	devfs_mk_dir("spi");
-+	for (i = 0; i < NR_SPI_DEVICES; i++) {
-+		devfs_mk_cdev(MKDEV(SPI_MAJOR, i), S_IFCHR | S_IRUSR | S_IWUSR, "spi/%d",i);
-+	}
-+#endif
-+	printk(KERN_INFO "AT91 SPI driver loaded\n");
-+
-+	return 0;
-+}
-+
-+/*
-+ * Remove the SPI /dev interface driver
-+ */
-+static void __exit at91_spidev_exit(void)
-+{
-+#ifdef CONFIG_DEVFS_FS
-+	int i;
-+	for (i = 0; i < NR_SPI_DEVICES; i++) {
-+		devfs_remove("spi/%d", i);
-+	}
-+
-+	devfs_remove("spi");
-+#endif
-+
-+	if (unregister_chrdev(SPI_MAJOR, "spi")) {
-+		printk(KERN_ERR "at91_spidev: Unable to release major %d for SPI bus\n", SPI_MAJOR);
-+		return;
-+	}
-+}
-+
-+module_init(at91_spidev_init);
-+module_exit(at91_spidev_exit);
-+
-+MODULE_LICENSE("GPL")
-+MODULE_AUTHOR("Andrew Victor")
-+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/Kconfig linux-2.6-stable/drivers/i2c/busses/Kconfig
---- linux-2.6.21/drivers/i2c/busses/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/Kconfig	Tue May  8 12:13:31 2007
-@@ -81,6 +81,14 @@
- 	  This supports the use of the I2C interface on Atmel AT91
- 	  processors.
- 
-+config I2C_AT91_CLOCKRATE
-+	prompt "Atmel AT91 I2C/TWI clock-rate"
-+	depends on I2C_AT91
-+	int
-+	default 100000
-+	help
-+	  Set the AT91 I2C/TWI clock-rate.
-+
- config I2C_AU1550
- 	tristate "Au1550/Au1200 SMBus interface"
- 	depends on I2C && (SOC_AU1550 || SOC_AU1200)
-@@ -545,6 +553,14 @@
- 	  This driver can also be built as a module.  If so, the module
- 	  will be called i2c-voodoo3.
- 
-+config I2C_PCA
-+	tristate "PCA9564"
-+	depends on I2C
-+	select I2C_ALGOPCA
-+	help
-+	  This driver support the Philips PCA 9564 Parallel bus to I2C
-+	  bus controller.
-+
- config I2C_PCA_ISA
- 	tristate "PCA9564 on an ISA bus"
- 	depends on I2C
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/Makefile linux-2.6-stable/drivers/i2c/busses/Makefile
---- linux-2.6.21/drivers/i2c/busses/Makefile	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/Makefile	Tue May  8 12:13:31 2007
-@@ -28,6 +28,7 @@
- obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
- obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
- obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
-+obj-$(CONFIG_I2C_PCA)		+= i2c-pca.o
- obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
- obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
- obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/i2c-at91.c linux-2.6-stable/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.21/drivers/i2c/busses/i2c-at91.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/i2c/busses/i2c-at91.c	Tue May  8 12:13:31 2007
-@@ -31,8 +31,11 @@
- #include <asm/arch/board.h>
- #include <asm/arch/cpu.h>
- 
--#define TWI_CLOCK		100000		/* Hz. max 400 Kbits/sec */
- 
-+/* Clockrate is configurable - max 400 Kbits/sec */
-+static unsigned int clockrate = CONFIG_I2C_AT91_CLOCKRATE;
-+module_param(clockrate, uint, 0);
-+MODULE_PARM_DESC(clockrate, "The TWI clockrate");
- 
- static struct clk *twi_clk;
- static void __iomem *twi_base;
-@@ -53,7 +56,7 @@
- 	at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN);	/* Set Master mode */
- 
- 	/* Calcuate clock dividers */
--	cdiv = (clk_get_rate(twi_clk) / (2 * TWI_CLOCK)) - 3;
-+	cdiv = (clk_get_rate(twi_clk) / (2 * clockrate)) - 3;
- 	cdiv = cdiv + 1;	/* round up */
- 	ckdiv = 0;
- 	while (cdiv > 255) {
-@@ -61,11 +64,12 @@
- 		cdiv = cdiv >> 1;
- 	}
- 
--	if (cpu_is_at91rm9200()) {			/* AT91RM9200 Errata #22 */
--		if (ckdiv > 5) {
--			printk(KERN_ERR "AT91 I2C: Invalid TWI_CLOCK value!\n");
--			ckdiv = 5;
--		}
-+	if (cpu_is_at91rm9200() && (ckdiv > 5)) {	/* AT91RM9200 Errata #22 */
-+		printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+		ckdiv = 5;
-+	} else if (ckdiv > 7) {
-+		printk(KERN_ERR "AT91 I2C: Invalid TWI clockrate!\n");
-+		ckdiv = 7;
- 	}
- 
- 	at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN -x CVS linux-2.6.21/drivers/i2c/busses/i2c-pca.c linux-2.6-stable/drivers/i2c/busses/i2c-pca.c
---- linux-2.6.21/drivers/i2c/busses/i2c-pca.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/i2c/busses/i2c-pca.c	Tue May  8 12:13:31 2007
-@@ -0,0 +1,213 @@
-+/*
-+ *  Platform driver for PCA9564 I2C bus controller.
-+ *
-+ *  (C) 2006 Andrew Victor
-+ *
-+ *  Based on i2c-pca-isa.c driver for PCA9564 on ISA boards
-+ *    Copyright (C) 2004 Arcom Control Systems
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-pca.h>
-+
-+#include <asm/io.h>
-+
-+#include "../algos/i2c-algo-pca.h"
-+
-+#define PCA_OWN_ADDRESS		0x55	/* our address for slave mode */
-+#define PCA_CLOCK		I2C_PCA_CON_59kHz
-+
-+//#define REG_SHIFT		2
-+#define REG_SHIFT		0
-+
-+//#define DEBUG_IO
-+
-+#define PCA_IO_SIZE 4
-+
-+static void __iomem *base_addr;
-+static int irq;
-+static wait_queue_head_t pca_wait;
-+
-+static int pca_getown(struct i2c_algo_pca_data *adap)
-+{
-+	return PCA_OWN_ADDRESS;
-+}
-+
-+static int pca_getclock(struct i2c_algo_pca_data *adap)
-+{
-+	return PCA_CLOCK;
-+}
-+
-+static void pca_writebyte(struct i2c_algo_pca_data *adap, int reg, int val)
-+{
-+#ifdef DEBUG_IO
-+	static char *names[] = { "T/O", "DAT", "ADR", "CON" };
-+	printk("*** write %s at %#lx <= %#04x\n", names[reg], (unsigned long) base_addr+reg, val);
-+#endif
-+	udelay(1);
-+	outb(val, base_addr + (reg << REG_SHIFT));
-+}
-+
-+static int pca_readbyte(struct i2c_algo_pca_data *adap, int reg)
-+{
-+	int res;
-+
-+	udelay(1);
-+	res = inb(base_addr + (reg << REG_SHIFT));
-+#ifdef DEBUG_IO
-+	{
-+		static char *names[] = { "STA", "DAT", "ADR", "CON" };
-+		printk("*** read  %s => %#04x\n", names[reg], res);
-+	}
-+#endif
-+	return res;
-+}
-+
-+static int pca_waitforinterrupt(struct i2c_algo_pca_data *adap)
-+{
-+	int ret = 0;
-+
-+	if (irq > -1) {
-+		ret = wait_event_interruptible(pca_wait,
-+				pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI);
-+	} else {
-+		while ((pca_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
-+			udelay(100);
-+	}
-+	return ret;
-+}
-+
-+static irqreturn_t pca_handler(int this_irq, void *dev_id)
-+{
-+	wake_up_interruptible(&pca_wait);
-+	return IRQ_HANDLED;
-+}
-+
-+static struct i2c_algo_pca_data pca_i2c_data = {
-+	.get_own		= pca_getown,
-+	.get_clock		= pca_getclock,
-+	.write_byte		= pca_writebyte,
-+	.read_byte		= pca_readbyte,
-+	.wait_for_interrupt	= pca_waitforinterrupt,
-+};
-+
-+static struct i2c_adapter pca_i2c_ops = {
-+	.owner          = THIS_MODULE,
-+	.id		= I2C_HW_A_PLAT,
-+	.algo_data	= &pca_i2c_data,
-+	.name		= "PCA9564",
-+	.class		= I2C_CLASS_HWMON,
-+};
-+
-+static int __devinit pca_i2c_probe(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+
-+	init_waitqueue_head(&pca_wait);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res)
-+		return -ENODEV;
-+
-+	if (!request_mem_region(res->start, PCA_IO_SIZE, "PCA9564"))
-+		return -ENXIO;
-+
-+	base_addr = ioremap(res->start, PCA_IO_SIZE);
-+	if (base_addr == NULL)
-+		goto out_region;
-+
-+	irq = platform_get_irq(pdev, 0);
-+	if (irq > -1) {
-+		if (request_irq(irq, pca_handler, 0, "pca9564", NULL) < 0) {
-+			printk(KERN_ERR "i2c-pca: Request irq%d failed\n", irq);
-+			goto out_remap;
-+		}
-+	}
-+
-+	/* set up the driverfs linkage to our parent device */
-+	pca_i2c_ops.dev.parent = &pdev->dev;
-+
-+	if (i2c_pca_add_bus(&pca_i2c_ops) < 0) {
-+		printk(KERN_ERR "i2c-pca: Failed to add i2c bus\n");
-+		goto out_irq;
-+	}
-+
-+	return 0;
-+
-+ out_irq:
-+	if (irq > -1)
-+		free_irq(irq, &pca_i2c_ops);
-+
-+ out_remap:
-+	iounmap(base_addr);
-+
-+ out_region:
-+	release_mem_region(res->start, PCA_IO_SIZE);
-+	return -ENODEV;
-+}
-+
-+static int __devexit pca_i2c_remove(struct platform_device *pdev)
-+{
-+	struct resource *res;
-+
-+	i2c_del_adapter(&pca_i2c_ops);
-+
-+	if (irq > 0)
-+		free_irq(irq, NULL);
-+
-+	iounmap(base_addr);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	release_mem_region(res->start, PCA_IO_SIZE);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver pca_i2c_driver = {
-+	.probe		= pca_i2c_probe,
-+	.remove		= __devexit_p(pca_i2c_remove),
-+	.driver		= {
-+		.name	= "pca9564",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init pca_i2c_init(void)
-+{
-+	return platform_driver_register(&pca_i2c_driver);
-+}
-+
-+static void __exit pca_i2c_exit(void)
-+{
-+	platform_driver_unregister(&pca_i2c_driver);
-+}
-+
-+module_init(pca_i2c_init);
-+module_exit(pca_i2c_exit);
-+
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("PCA9564 platform driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/input/touchscreen/ads7846.c linux-2.6-stable/drivers/input/touchscreen/ads7846.c
---- linux-2.6.21/drivers/input/touchscreen/ads7846.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/input/touchscreen/ads7846.c	Tue May  8 12:56:33 2007
-@@ -39,7 +39,8 @@
- /*
-  * This code has been heavily tested on a Nokia 770, and lightly
-  * tested on other ads7846 devices (OSK/Mistral, Lubbock).
-- * Support for ads7843 and ads7845 has only been stubbed in.
-+ * Support for ads7843 tested on Atmel at91sam926x-EK.
-+ * Support for ads7845 has only been stubbed in.
-  *
-  * IRQ handling needs a workaround because of a shortcoming in handling
-  * edge triggered IRQs on some platforms like the OMAP1/2. These
-@@ -246,18 +247,16 @@
- 
- 	/* REVISIT:  take a few more samples, and compare ... */
- 
--	/* maybe off internal vREF */
--	if (use_internal) {
--		req->ref_off = REF_OFF;
--		req->xfer[4].tx_buf = &req->ref_off;
--		req->xfer[4].len = 1;
--		spi_message_add_tail(&req->xfer[4], &req->msg);
--
--		req->xfer[5].rx_buf = &req->scratch;
--		req->xfer[5].len = 2;
--		CS_CHANGE(req->xfer[5]);
--		spi_message_add_tail(&req->xfer[5], &req->msg);
--	}
-+	/* converter in low power mode & enable PENIRQ */
-+	req->ref_off = PWRDOWN;
-+	req->xfer[4].tx_buf = &req->ref_off;
-+	req->xfer[4].len = 1;
-+	spi_message_add_tail(&req->xfer[4], &req->msg);
-+
-+	req->xfer[5].rx_buf = &req->scratch;
-+	req->xfer[5].len = 2;
-+	CS_CHANGE(req->xfer[5]);
-+	spi_message_add_tail(&req->xfer[5], &req->msg);
- 
- 	ts->irq_disabled = 1;
- 	disable_irq(spi->irq);
-@@ -536,6 +535,9 @@
- 	} else
- 		Rt = 0;
- 
-+	if (ts->model == 7843)
-+		Rt = ts->pressure_max / 2;
-+
- 	/* Sample found inconsistent by debouncing or pressure is beyond
- 	 * the maximum. Don't report it to user space, repeat at least
- 	 * once more the measurement
-diff -urN -x CVS linux-2.6.21/drivers/leds/Kconfig linux-2.6-stable/drivers/leds/Kconfig
---- linux-2.6.21/drivers/leds/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/leds/Kconfig	Tue May  8 12:13:31 2007
-@@ -76,6 +76,13 @@
- 	  This option enables support for the Soekris net4801 and net4826 error
- 	  LED.
- 
-+config LEDS_AT91
-+	tristate "LED support using AT91 GPIOs"
-+	depends on LEDS_CLASS && ARCH_AT91 && !LEDS
-+	help
-+	  This option enables support for LEDs connected to GPIO lines
-+	  on AT91-based boards.
-+
- config LEDS_WRAP
- 	tristate "LED Support for the WRAP series LEDs"
- 	depends on LEDS_CLASS && SCx200_GPIO
-diff -urN -x CVS linux-2.6.21/drivers/leds/Makefile linux-2.6-stable/drivers/leds/Makefile
---- linux-2.6.21/drivers/leds/Makefile	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/leds/Makefile	Tue May  8 12:13:31 2007
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_AT91)			+= leds-at91.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-diff -urN -x CVS linux-2.6.21/drivers/leds/leds-at91.c linux-2.6-stable/drivers/leds/leds-at91.c
---- linux-2.6.21/drivers/leds/leds-at91.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/leds/leds-at91.c	Tue May  8 12:13:31 2007
-@@ -0,0 +1,140 @@
-+/*
-+ * AT91 GPIO based LED driver
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+static LIST_HEAD(at91_led_list);	/* list of AT91 LEDs */
-+
-+struct at91_led {
-+	struct led_classdev	cdev;
-+	struct list_head	list;
-+	struct at91_gpio_led	*led_data;
-+};
-+
-+/*
-+ * Change the state of the LED.
-+ */
-+static void at91_led_set(struct led_classdev *cdev, enum led_brightness value)
-+{
-+	struct at91_led	*led = container_of(cdev, struct at91_led, cdev);
-+	short		active = (value == LED_OFF);
-+
-+	if (led->led_data->flags & 1)	/* active high/low? */
-+		active = !active;
-+	at91_set_gpio_value(led->led_data->gpio, active);
-+}
-+
-+static int __devexit at91_led_remove(struct platform_device *pdev)
-+{
-+	struct at91_led		*led;
-+
-+	list_for_each_entry (led, &at91_led_list, list)
-+		led_classdev_unregister(&led->cdev);
-+
-+#warning "Free allocated memory"
-+	// TODO: Free memory.	kfree(led);
-+
-+	return 0;
-+}
-+
-+static int __init at91_led_probe(struct platform_device *pdev)
-+{
-+	int			status = 0;
-+	struct at91_gpio_led	*pdata = pdev->dev.platform_data;
-+	unsigned		nr_leds;
-+	struct at91_led		*led;
-+
-+	if (!pdata)
-+		return -ENODEV;
-+
-+	nr_leds = pdata->index;		/* first index stores number of LEDs */
-+
-+	while (nr_leds--) {
-+		led = kzalloc(sizeof(struct at91_led), GFP_KERNEL);
-+		if (!led) {
-+			dev_err(&pdev->dev, "No memory for device\n");
-+			status = -ENOMEM;
-+			goto cleanup;
-+		}
-+		led->led_data = pdata;
-+		led->cdev.name = pdata->name;
-+		led->cdev.brightness_set = at91_led_set,
-+		led->cdev.default_trigger = pdata->trigger;
-+
-+		status = led_classdev_register(&pdev->dev, &led->cdev);
-+		if (status < 0) {
-+			dev_err(&pdev->dev, "led_classdev_register failed - %d\n", status);
-+cleanup:
-+			at91_led_remove(pdev);
-+			break;
-+		}
-+		list_add(&led->list, &at91_led_list);
-+		pdata++;
-+	}
-+	return status;
-+}
-+
-+#ifdef CONFIG_PM
-+static int at91_led_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct at91_led	*led;
-+
-+	list_for_each_entry (led, &at91_led_list, list)
-+		led_classdev_suspend(&led->cdev);
-+
-+	return 0;
-+}
-+
-+static int at91_led_resume(struct platform_device *dev)
-+{
-+	struct at91_led	*led;
-+
-+	list_for_each_entry (led, &at91_led_list, list)
-+		led_classdev_resume(&led->cdev);
-+
-+	return 0;
-+}
-+#else
-+#define	at91_led_suspend	NULL
-+#define	at91_led_resume		NULL
-+#endif
-+
-+static struct platform_driver at91_led_driver = {
-+	.probe		= at91_led_probe,
-+	.remove		= __devexit_p(at91_led_remove),
-+	.suspend	= at91_led_suspend,
-+	.resume		= at91_led_resume,
-+	.driver		= {
-+		.name	= "at91_leds",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at91_led_init(void)
-+{
-+	return platform_driver_register(&at91_led_driver);
-+}
-+module_init(at91_led_init);
-+
-+static void __exit at91_led_exit(void)
-+{
-+	platform_driver_unregister(&at91_led_driver);
-+}
-+module_exit(at91_led_exit);
-+
-+MODULE_DESCRIPTION("AT91 GPIO LED driver");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/mmc/at91_mci.c linux-2.6-stable/drivers/mmc/at91_mci.c
---- linux-2.6.21/drivers/mmc/at91_mci.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mmc/at91_mci.c	Fri May 11 17:13:13 2007
-@@ -86,7 +86,7 @@
- 
- #define AT91_MCI_ERRORS	(AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE	\
- 		| AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE		\
--		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)			
-+		| AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)
- 
- #define at91_mci_read(host, reg)	__raw_readl((host)->baseaddr + (reg))
- #define at91_mci_write(host, reg, val)	__raw_writel((val), (host)->baseaddr + (reg))
-@@ -561,9 +561,7 @@
- 	pr_debug("Status = %08X [%08X %08X %08X %08X]\n",
- 		 status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
- 
--	if (status & (AT91_MCI_RINDE | AT91_MCI_RDIRE | AT91_MCI_RCRCE |
--			AT91_MCI_RENDE | AT91_MCI_RTOE | AT91_MCI_DCRCE |
--			AT91_MCI_DTOE | AT91_MCI_OVRE | AT91_MCI_UNRE)) {
-+	if (status & AT91_MCI_ERRORS) {
- 		if ((status & AT91_MCI_RCRCE) &&
- 			((cmd->opcode == MMC_SEND_OP_COND) || (cmd->opcode == SD_APP_OP_COND))) {
- 			cmd->error = MMC_ERR_NONE;
-@@ -665,15 +663,15 @@
- 
- 	int_status = at91_mci_read(host, AT91_MCI_SR);
- 	int_mask = at91_mci_read(host, AT91_MCI_IMR);
--	
-+
- 	pr_debug("MCI irq: status = %08X, %08X, %08X\n", int_status, int_mask,
- 		int_status & int_mask);
--	
-+
- 	int_status = int_status & int_mask;
- 
- 	if (int_status & AT91_MCI_ERRORS) {
- 		completed = 1;
--		
-+
- 		if (int_status & AT91_MCI_UNRE)
- 			pr_debug("MMC: Underrun error\n");
- 		if (int_status & AT91_MCI_OVRE)
-@@ -821,7 +819,7 @@
- 	mmc->f_min = 375000;
- 	mmc->f_max = 25000000;
- 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
--	mmc->caps = MMC_CAP_BYTEBLOCK;
-+	mmc->caps = MMC_CAP_BYTEBLOCK | MMC_CAP_MULTIWRITE;
- 
- 	mmc->max_blk_size = 4095;
- 	mmc->max_blk_count = mmc->max_req_size;
-@@ -895,6 +893,8 @@
- 
- 	mmc_add_host(mmc);
- 
-+	device_init_wakeup(&pdev->dev, 1);
-+
- 	/*
- 	 * monitor card insertion/removal if we can
- 	 */
-@@ -924,6 +924,8 @@
- 
- 	host = mmc_priv(mmc);
- 
-+	device_init_wakeup(&pdev->dev, 0);
-+
- 	if (host->present != -1) {
- 		free_irq(host->board->det_pin, host);
- 		cancel_delayed_work(&host->mmc->detect);
-@@ -951,8 +953,12 @@
- static int at91_mci_suspend(struct platform_device *pdev, pm_message_t state)
- {
- 	struct mmc_host *mmc = platform_get_drvdata(pdev);
-+	struct at91mci_host *host = mmc_priv(mmc);
- 	int ret = 0;
- 
-+	if (device_may_wakeup(&pdev->dev))
-+		enable_irq_wake(host->board->det_pin);
-+
- 	if (mmc)
- 		ret = mmc_suspend_host(mmc, state);
- 
-@@ -962,8 +968,12 @@
- static int at91_mci_resume(struct platform_device *pdev)
- {
- 	struct mmc_host *mmc = platform_get_drvdata(pdev);
-+	struct at91mci_host *host = mmc_priv(mmc);
- 	int ret = 0;
- 
-+	if (device_may_wakeup(&pdev->dev))
-+		disable_irq_wake(host->board->det_pin);
-+
- 	if (mmc)
- 		ret = mmc_resume_host(mmc);
- 
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/Kconfig linux-2.6-stable/drivers/mtd/devices/Kconfig
---- linux-2.6.21/drivers/mtd/devices/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/devices/Kconfig	Tue May  8 14:31:24 2007
-@@ -267,5 +267,11 @@
- 	  LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
- 	  you have managed to wipe the first block.
- 
--endmenu
-+config MTD_AT91_DATAFLASH
-+	tristate "AT91RM9200 DataFlash AT45DBxxx (legacy driver)"
-+	depends on MTD && ARCH_AT91RM9200 && AT91_SPI
-+	help
-+	  This enables access to the DataFlash (AT45DBxxx) on the AT91RM9200.
-+	  If you have such a board, say 'Y'.
- 
-+endmenu
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/Makefile linux-2.6-stable/drivers/mtd/devices/Makefile
---- linux-2.6.21/drivers/mtd/devices/Makefile	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/devices/Makefile	Tue May  8 14:31:24 2007
-@@ -17,3 +17,4 @@
- obj-$(CONFIG_MTD_BLOCK2MTD)	+= block2mtd.o
- obj-$(CONFIG_MTD_DATAFLASH)	+= mtd_dataflash.o
- obj-$(CONFIG_MTD_M25P80)	+= m25p80.o
-+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN -x CVS linux-2.6.21/drivers/mtd/devices/at91_dataflash.c linux-2.6-stable/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.21/drivers/mtd/devices/at91_dataflash.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/mtd/devices/at91_dataflash.c	Tue May  8 14:31:24 2007
-@@ -0,0 +1,667 @@
-+/*
-+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
-+ *
-+ *  Copyright (C) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/pci.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#include <asm/arch/spi.h>
-+
-+#undef DEBUG_DATAFLASH
-+
-+#define DATAFLASH_MAX_DEVICES	4	/* max number of dataflash devices */
-+#undef	DATAFLASH_ALWAYS_ADD_DEVICE	/* always add whole device when using partitions? */
-+
-+#define OP_READ_CONTINUOUS	0xE8
-+#define OP_READ_PAGE		0xD2
-+#define OP_READ_BUFFER1		0xD4
-+#define OP_READ_BUFFER2		0xD6
-+#define OP_READ_STATUS		0xD7
-+
-+#define OP_ERASE_PAGE		0x81
-+#define OP_ERASE_BLOCK		0x50
-+
-+#define OP_TRANSFER_BUF1	0x53
-+#define OP_TRANSFER_BUF2	0x55
-+#define OP_COMPARE_BUF1		0x60
-+#define OP_COMPARE_BUF2		0x61
-+
-+#define OP_PROGRAM_VIA_BUF1	0x82
-+#define OP_PROGRAM_VIA_BUF2	0x85
-+
-+struct dataflash_local
-+{
-+	int spi;			/* SPI chip-select number */
-+
-+	unsigned int page_size;		/* number of bytes per page */
-+	unsigned short page_offset;	/* page offset in flash address */
-+};
-+
-+
-+/* Detected DataFlash devices */
-+static struct mtd_info* mtd_devices[DATAFLASH_MAX_DEVICES];
-+static int nr_devices = 0;
-+
-+/* ......................................................................... */
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+
-+static struct mtd_partition static_partitions_2M[] =
-+{
-+	{
-+		.name		= "bootloader",
-+		.offset		= 0,
-+		.size		= 1 * 32 * 8 * 528,	/* 1st sector = 32 blocks * 8 pages * 528 bytes */
-+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
-+	},
-+	{
-+		.name		= "kernel",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 6 * 32 * 8 * 528,	/* 6 sectors */
-+	},
-+	{
-+		.name		= "filesystem",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= MTDPART_SIZ_FULL,	/* rest = 9 sectors */
-+	}
-+};
-+
-+static struct mtd_partition static_partitions_4M[] =
-+{
-+	{
-+		.name		= "bootloader",
-+		.offset		= 0,
-+		.size		= 1 * 64 * 8 * 528,	/* 1st sector = 64 blocks * 8 pages * 528 bytes */
-+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
-+	},
-+	{
-+		.name		= "kernel",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 4 * 64 * 8 * 528,	/* 4 sectors */
-+	},
-+	{
-+		.name		= "filesystem",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= MTDPART_SIZ_FULL,	/* rest = 11 sectors */
-+	}
-+};
-+
-+#if defined(CONFIG_MACH_KAFA)
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+	{
-+		name:		"romboot",
-+		offset:		0,
-+		size:		16 * 1056,	/* 160 Kb */
-+		mask_flags:	MTD_WRITEABLE,		/* read-only */
-+	},
-+	{
-+		name:		"uboot",
-+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+		size:		128 * 1056,		/* 1 MB */
-+	},
-+	{
-+		name:		"kernel",
-+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+		size:		1024 * 1056,		/* 1 MB */
-+	},
-+	{
-+		name:		"filesystem",
-+		offset:		MTDPART_OFS_APPEND, /* Sperry, NXTBLK is broken */
-+		size:		MTDPART_SIZ_FULL,
-+	}
-+};
-+
-+#elif defined(CONFIG_MACH_MULTMDP)
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+	{
-+		.name		= "bootloader",
-+		.offset		= 0,
-+		.size		= 12 * 1056,		/* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
-+	},
-+	{
-+		.name		= "configuration",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 20 * 1056,
-+	},
-+	{
-+		.name		= "kernel",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 1520 * 1056,
-+	},
-+	{
-+		.name		= "filesystem",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= MTDPART_SIZ_FULL,
-+	}
-+};
-+
-+#else
-+
-+static struct mtd_partition static_partitions_8M[] =
-+{
-+	{
-+		.name		= "bootloader",
-+		.offset		= 0,
-+		.size		= 1 * 32 * 8 * 1056,	/* 1st sector = 32 blocks * 8 pages * 1056 bytes */
-+		.mask_flags	= MTD_WRITEABLE,	/* read-only */
-+	},
-+	{
-+		.name		= "kernel",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= 5 * 32 * 8 * 1056,	/* 5 sectors */
-+	},
-+	{
-+		.name		= "filesystem",
-+		.offset		= MTDPART_OFS_NXTBLK,
-+		.size		= MTDPART_SIZ_FULL,	/* rest = 26 sectors */
-+	}
-+};
-+#endif
-+
-+static const char *part_probes[] = { "cmdlinepart", NULL, };
-+
-+#endif
-+
-+/* ......................................................................... */
-+
-+/* Allocate a single SPI transfer descriptor.  We're assuming that if multiple
-+   SPI transfers occur at the same time, spi_access_bus() will serialize them.
-+   If this is not valid, then either (i) each dataflash 'priv' structure
-+   needs it's own transfer descriptor, (ii) we lock this one, or (iii) use
-+   another mechanism.   */
-+static struct spi_transfer_list* spi_transfer_desc;
-+
-+/*
-+ * Perform a SPI transfer to access the DataFlash device.
-+ */
-+static int do_spi_transfer(int nr, char* tx, int tx_len, char* rx, int rx_len,
-+		char* txnext, int txnext_len, char* rxnext, int rxnext_len)
-+{
-+	struct spi_transfer_list* list = spi_transfer_desc;
-+
-+	list->tx[0] = tx;	list->txlen[0] = tx_len;
-+	list->rx[0] = rx;	list->rxlen[0] = rx_len;
-+
-+	list->tx[1] = txnext;	list->txlen[1] = txnext_len;
-+	list->rx[1] = rxnext;	list->rxlen[1] = rxnext_len;
-+
-+	list->nr_transfers = nr;
-+
-+	return spi_transfer(list);
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Poll the DataFlash device until it is READY.
-+ */
-+static void at91_dataflash_waitready(void)
-+{
-+	char* command = kmalloc(2, GFP_KERNEL);
-+
-+	if (!command)
-+		return;
-+
-+	do {
-+		command[0] = OP_READ_STATUS;
-+		command[1] = 0;
-+
-+		do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+	} while ((command[1] & 0x80) == 0);
-+
-+	kfree(command);
-+}
-+
-+/*
-+ * Return the status of the DataFlash device.
-+ */
-+static unsigned short at91_dataflash_status(void)
-+{
-+	unsigned short status;
-+	char* command = kmalloc(2, GFP_KERNEL);
-+
-+	if (!command)
-+		return 0;
-+
-+	command[0] = OP_READ_STATUS;
-+	command[1] = 0;
-+
-+	do_spi_transfer(1, command, 2, command, 2, NULL, 0, NULL, 0);
-+	status = command[1];
-+
-+	kfree(command);
-+	return status;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Erase blocks of flash.
-+ */
-+static int at91_dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
-+{
-+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+	unsigned int pageaddr;
-+	char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+	printk("dataflash_erase: addr=%i len=%i\n", instr->addr, instr->len);
-+#endif
-+
-+	/* Sanity checks */
-+	if (instr->addr + instr->len > mtd->size)
-+		return -EINVAL;
-+	if ((instr->len % mtd->erasesize != 0) || (instr->len % priv->page_size != 0))
-+		return -EINVAL;
-+	if ((instr->addr % priv->page_size) != 0)
-+		return -EINVAL;
-+
-+	command = kmalloc(4, GFP_KERNEL);
-+	if (!command)
-+		return -ENOMEM;
-+
-+	while (instr->len > 0) {
-+		/* Calculate flash page address */
-+		pageaddr = (instr->addr / priv->page_size) << priv->page_offset;
-+
-+		command[0] = OP_ERASE_PAGE;
-+		command[1] = (pageaddr & 0x00FF0000) >> 16;
-+		command[2] = (pageaddr & 0x0000FF00) >> 8;
-+		command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+		printk("ERASE: (%x) %x %x %x [%i]\n", command[0], command[1], command[2], command[3], pageaddr);
-+#endif
-+
-+		/* Send command to SPI device */
-+		spi_access_bus(priv->spi);
-+		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+
-+		at91_dataflash_waitready();		/* poll status until ready */
-+		spi_release_bus(priv->spi);
-+
-+		instr->addr += priv->page_size;		/* next page */
-+		instr->len -= priv->page_size;
-+	}
-+
-+	kfree(command);
-+
-+	/* Inform MTD subsystem that erase is complete */
-+	instr->state = MTD_ERASE_DONE;
-+	if (instr->callback)
-+		instr->callback(instr);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Read from the DataFlash device.
-+ *   from   : Start offset in flash device
-+ *   len    : Amount to read
-+ *   retlen : About of data actually read
-+ *   buf    : Buffer containing the data
-+ */
-+static int at91_dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
-+{
-+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+	unsigned int addr;
-+	char* command;
-+
-+#ifdef DEBUG_DATAFLASH
-+	printk("dataflash_read: %lli .. %lli\n", from, from+len);
-+#endif
-+
-+	*retlen = 0;
-+
-+	/* Sanity checks */
-+	if (!len)
-+		return 0;
-+	if (from + len > mtd->size)
-+		return -EINVAL;
-+
-+	/* Calculate flash page/byte address */
-+	addr = (((unsigned)from / priv->page_size) << priv->page_offset) + ((unsigned)from % priv->page_size);
-+
-+	command = kmalloc(8, GFP_KERNEL);
-+	if (!command)
-+		return -ENOMEM;
-+
-+	command[0] = OP_READ_CONTINUOUS;
-+	command[1] = (addr & 0x00FF0000) >> 16;
-+	command[2] = (addr & 0x0000FF00) >> 8;
-+	command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+	printk("READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+
-+	/* Send command to SPI device */
-+	spi_access_bus(priv->spi);
-+	do_spi_transfer(2, command, 8, command, 8, buf, len, buf, len);
-+	spi_release_bus(priv->spi);
-+
-+	*retlen = len;
-+	kfree(command);
-+	return 0;
-+}
-+
-+/*
-+ * Write to the DataFlash device.
-+ *   to     : Start offset in flash device
-+ *   len    : Amount to write
-+ *   retlen : Amount of data actually written
-+ *   buf    : Buffer containing the data
-+ */
-+static int at91_dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
-+{
-+	struct dataflash_local *priv = (struct dataflash_local *) mtd->priv;
-+	unsigned int pageaddr, addr, offset, writelen;
-+	size_t remaining;
-+	u_char *writebuf;
-+	unsigned short status;
-+	int res = 0;
-+	char* command;
-+	char* tmpbuf = NULL;
-+
-+#ifdef DEBUG_DATAFLASH
-+	printk("dataflash_write: %lli .. %lli\n", to, to+len);
-+#endif
-+
-+	*retlen = 0;
-+
-+	/* Sanity checks */
-+	if (!len)
-+		return 0;
-+	if (to + len > mtd->size)
-+		return -EINVAL;
-+
-+	command = kmalloc(4, GFP_KERNEL);
-+	if (!command)
-+		return -ENOMEM;
-+
-+	pageaddr = ((unsigned)to / priv->page_size);
-+	offset = ((unsigned)to % priv->page_size);
-+	if (offset + len > priv->page_size)
-+		writelen = priv->page_size - offset;
-+	else
-+		writelen = len;
-+	writebuf = (u_char *)buf;
-+	remaining = len;
-+
-+	/* Allocate temporary buffer */
-+	tmpbuf = kmalloc(priv->page_size, GFP_KERNEL);
-+	if (!tmpbuf) {
-+		kfree(command);
-+		return -ENOMEM;
-+	}
-+
-+	/* Gain access to the SPI bus */
-+	spi_access_bus(priv->spi);
-+
-+	while (remaining > 0) {
-+#ifdef DEBUG_DATAFLASH
-+		printk("write @ %i:%i len=%i\n", pageaddr, offset, writelen);
-+#endif
-+
-+		/* (1) Transfer to Buffer1 */
-+		if (writelen != priv->page_size) {
-+			addr = pageaddr << priv->page_offset;
-+			command[0] = OP_TRANSFER_BUF1;
-+			command[1] = (addr & 0x00FF0000) >> 16;
-+			command[2] = (addr & 0x0000FF00) >> 8;
-+			command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+			printk("TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+			do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+			at91_dataflash_waitready();
-+		}
-+
-+		/* (2) Program via Buffer1 */
-+		addr = (pageaddr << priv->page_offset) + offset;
-+		command[0] = OP_PROGRAM_VIA_BUF1;
-+		command[1] = (addr & 0x00FF0000) >> 16;
-+		command[2] = (addr & 0x0000FF00) >> 8;
-+		command[3] = (addr & 0x000000FF);
-+#ifdef DEBUG_DATAFLASH
-+		printk("PROGRAM: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+		do_spi_transfer(2, command, 4, command, 4, writebuf, writelen, tmpbuf, writelen);
-+		at91_dataflash_waitready();
-+
-+		/* (3) Compare to Buffer1 */
-+		addr = pageaddr << priv->page_offset;
-+		command[0] = OP_COMPARE_BUF1;
-+		command[1] = (addr & 0x00FF0000) >> 16;
-+		command[2] = (addr & 0x0000FF00) >> 8;
-+		command[3] = 0;
-+#ifdef DEBUG_DATAFLASH
-+		printk("COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]);
-+#endif
-+		do_spi_transfer(1, command, 4, command, 4, NULL, 0, NULL, 0);
-+		at91_dataflash_waitready();
-+
-+		/* Get result of the compare operation */
-+		status = at91_dataflash_status();
-+		if ((status & 0x40) == 1) {
-+			printk("at91_dataflash: Write error on page %i\n", pageaddr);
-+			remaining = 0;
-+			res = -EIO;
-+		}
-+
-+		remaining = remaining - writelen;
-+		pageaddr++;
-+		offset = 0;
-+		writebuf += writelen;
-+		*retlen += writelen;
-+
-+		if (remaining > priv->page_size)
-+			writelen = priv->page_size;
-+		else
-+			writelen = remaining;
-+	}
-+
-+	/* Release SPI bus */
-+	spi_release_bus(priv->spi);
-+
-+	kfree(tmpbuf);
-+	kfree(command);
-+	return res;
-+}
-+
-+/* ......................................................................... */
-+
-+/*
-+ * Initialize and register DataFlash device with MTD subsystem.
-+ */
-+static int __init add_dataflash(int channel, char *name, int IDsize,
-+		int nr_pages, int pagesize, int pageoffset)
-+{
-+	struct mtd_info *device;
-+	struct dataflash_local *priv;
-+#ifdef CONFIG_MTD_PARTITIONS
-+	struct mtd_partition *mtd_parts = 0;
-+	int mtd_parts_nr = 0;
-+#endif
-+
-+	if (nr_devices >= DATAFLASH_MAX_DEVICES) {
-+		printk(KERN_ERR "at91_dataflash: Too many devices detected\n");
-+		return 0;
-+	}
-+
-+	device = kmalloc(sizeof(struct mtd_info) + strlen(name) + 8, GFP_KERNEL);
-+	if (!device)
-+		return -ENOMEM;
-+	memset(device, 0, sizeof(struct mtd_info));
-+
-+	device->name = (char *)&device[1];
-+	sprintf(device->name, "%s.spi%d", name, channel);
-+	device->size = nr_pages * pagesize;
-+	device->erasesize = pagesize;
-+	device->writesize = pagesize;
-+	device->owner = THIS_MODULE;
-+	device->type = MTD_DATAFLASH;
-+	device->flags = MTD_WRITEABLE;
-+	device->erase = at91_dataflash_erase;
-+	device->read = at91_dataflash_read;
-+	device->write = at91_dataflash_write;
-+
-+	priv = (struct dataflash_local *) kmalloc(sizeof(struct dataflash_local), GFP_KERNEL);
-+	if (!priv) {
-+		kfree(device);
-+		return -ENOMEM;
-+	}
-+	memset(priv, 0, sizeof(struct dataflash_local));
-+
-+	priv->spi = channel;
-+	priv->page_size = pagesize;
-+	priv->page_offset = pageoffset;
-+	device->priv = priv;
-+
-+	mtd_devices[nr_devices] = device;
-+	nr_devices++;
-+	printk("at91_dataflash: %s detected [spi%i] (%i bytes)\n", name, channel, device->size);
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+	mtd_parts_nr = parse_mtd_partitions(device, part_probes, &mtd_parts, 0);
-+#endif
-+	if (mtd_parts_nr <= 0) {
-+		switch (IDsize) {
-+			case SZ_2M:
-+				mtd_parts = static_partitions_2M;
-+				mtd_parts_nr = ARRAY_SIZE(static_partitions_2M);
-+				break;
-+			case SZ_4M:
-+				mtd_parts = static_partitions_4M;
-+				mtd_parts_nr = ARRAY_SIZE(static_partitions_4M);
-+				break;
-+			case SZ_8M:
-+				mtd_parts = static_partitions_8M;
-+				mtd_parts_nr = ARRAY_SIZE(static_partitions_8M);
-+				break;
-+		}
-+	}
-+
-+	if (mtd_parts_nr > 0) {
-+#ifdef DATAFLASH_ALWAYS_ADD_DEVICE
-+		add_mtd_device(device);
-+#endif
-+		return add_mtd_partitions(device, mtd_parts, mtd_parts_nr);
-+	}
-+#endif
-+	return add_mtd_device(device);		/* add whole device */
-+}
-+
-+/*
-+ * Detect and initialize DataFlash device connected to specified SPI channel.
-+ *
-+ *   Device            Density         ID code                 Nr Pages        Page Size       Page offset
-+ *   AT45DB011B        1Mbit   (128K)  xx0011xx (0x0c)         512             264             9
-+ *   AT45DB021B        2Mbit   (256K)  xx0101xx (0x14)         1025            264             9
-+ *   AT45DB041B        4Mbit   (512K)  xx0111xx (0x1c)         2048            264             9
-+ *   AT45DB081B        8Mbit   (1M)    xx1001xx (0x24)         4096            264             9
-+ *   AT45DB0161B       16Mbit  (2M)    xx1011xx (0x2c)         4096            528             10
-+ *   AT45DB0321B       32Mbit  (4M)    xx1101xx (0x34)         8192            528             10
-+ *   AT45DB0642        64Mbit  (8M)    xx1111xx (0x3c)         8192            1056            11
-+ *   AT45DB1282        128Mbit (16M)   xx0100xx (0x10)         16384           1056            11
-+ */
-+static int __init at91_dataflash_detect(int channel)
-+{
-+	int res = 0;
-+	unsigned short status;
-+
-+	spi_access_bus(channel);
-+	status = at91_dataflash_status();
-+	spi_release_bus(channel);
-+	if (status != 0xff) {			/* no dataflash device there */
-+		switch (status & 0x3c) {
-+			case 0x0c:	/* 0 0 1 1 */
-+				res = add_dataflash(channel, "AT45DB011B", SZ_128K, 512, 264, 9);
-+				break;
-+			case 0x14:	/* 0 1 0 1 */
-+				res = add_dataflash(channel, "AT45DB021B", SZ_256K, 1025, 264, 9);
-+				break;
-+			case 0x1c:	/* 0 1 1 1 */
-+				res = add_dataflash(channel, "AT45DB041B", SZ_512K, 2048, 264, 9);
-+				break;
-+			case 0x24:	/* 1 0 0 1 */
-+				res = add_dataflash(channel, "AT45DB081B", SZ_1M, 4096, 264, 9);
-+				break;
-+			case 0x2c:	/* 1 0 1 1 */
-+				res = add_dataflash(channel, "AT45DB161B", SZ_2M, 4096, 528, 10);
-+				break;
-+			case 0x34:	/* 1 1 0 1 */
-+				res = add_dataflash(channel, "AT45DB321B", SZ_4M, 8192, 528, 10);
-+				break;
-+			case 0x3c:	/* 1 1 1 1 */
-+				res = add_dataflash(channel, "AT45DB642", SZ_8M, 8192, 1056, 11);
-+				break;
-+// Currently unsupported since Atmel removed the "Main Memory Program via Buffer" commands.
-+//			case 0x10:	/* 0 1 0 0 */
-+//				res = add_dataflash(channel, "AT45DB1282", SZ_16M, 16384, 1056, 11);
-+//				break;
-+			default:
-+				printk(KERN_ERR "at91_dataflash: Unknown device (%x)\n", status & 0x3c);
-+		}
-+	}
-+
-+	return res;
-+}
-+
-+static int __init at91_dataflash_init(void)
-+{
-+	spi_transfer_desc = kmalloc(sizeof(struct spi_transfer_list), GFP_KERNEL);
-+	if (!spi_transfer_desc)
-+		return -ENOMEM;
-+
-+	/* DataFlash (SPI chip select 0) */
-+	at91_dataflash_detect(0);
-+
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+	/* DataFlash card (SPI chip select 3) */
-+	at91_dataflash_detect(3);
-+#endif
-+
-+	return 0;
-+}
-+
-+static void __exit at91_dataflash_exit(void)
-+{
-+	int i;
-+
-+	for (i = 0; i < DATAFLASH_MAX_DEVICES; i++) {
-+		if (mtd_devices[i]) {
-+#ifdef CONFIG_MTD_PARTITIONS
-+			del_mtd_partitions(mtd_devices[i]);
-+#else
-+			del_mtd_device(mtd_devices[i]);
-+#endif
-+			kfree(mtd_devices[i]->priv);
-+			kfree(mtd_devices[i]);
-+		}
-+	}
-+	nr_devices = 0;
-+	kfree(spi_transfer_desc);
-+}
-+
-+
-+module_init(at91_dataflash_init);
-+module_exit(at91_dataflash_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Andrew Victor");
-+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN -x CVS linux-2.6.21/drivers/mtd/nand/at91_nand.c linux-2.6-stable/drivers/mtd/nand/at91_nand.c
---- linux-2.6.21/drivers/mtd/nand/at91_nand.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/mtd/nand/at91_nand.c	Tue May  8 12:13:31 2007
-@@ -82,6 +82,10 @@
- 		at91_set_gpio_value(host->board->enable_pin, 1);
- }
- 
-+#ifdef CONFIG_MTD_PARTITIONS
-+const char *part_probes[] = { "cmdlinepart", NULL };
-+#endif
-+
- /*
-  * Probe for the NAND device.
-  */
-@@ -151,6 +155,12 @@
- #ifdef CONFIG_MTD_PARTITIONS
- 	if (host->board->partition_info)
- 		partitions = host->board->partition_info(mtd->size, &num_partitions);
-+#ifdef CONFIG_MTD_CMDLINE_PARTS
-+	else {
-+		mtd->name = "at91_nand";
-+		num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0);
-+	}
-+#endif
- 
- 	if ((!partitions) || (num_partitions == 0)) {
- 		printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n");
-diff -urN -x CVS linux-2.6.21/drivers/net/arm/at91_ether.c linux-2.6-stable/drivers/net/arm/at91_ether.c
---- linux-2.6.21/drivers/net/arm/at91_ether.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/net/arm/at91_ether.c	Tue May  8 12:13:31 2007
-@@ -225,6 +225,16 @@
- 		if (!(phy & ((1 << 2) | 1)))
- 			goto done;
- 	}
-+	else if (lp->phy_type == MII_T78Q21x3_ID) {			/* ack interrupt in Teridian PHY */
-+		read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy);
-+		if (!(phy & ((1 << 2) | 1)))
-+			goto done;
-+	}
-+	else if (lp->phy_type == MII_DP83848_ID) {
-+		read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy);	/* ack interrupt in DP83848 PHY */
-+		if (!(phy & (1 << 7)))
-+			goto done;
-+	}
- 
- 	update_linkspeed(dev, 0);
- 
-@@ -280,6 +290,19 @@
- 		dsintr = (1 << 10) | ( 1 << 8);
- 		write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- 	}
-+	else if (lp->phy_type == MII_T78Q21x3_ID) {	/* for Teridian PHY */
-+		read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
-+		dsintr = dsintr | 0x500;		/* set bits 8, 10 */
-+		write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
-+	}
-+	else if (lp->phy_type == MII_DP83848_ID) {	/* National Semiconductor DP83848 PHY */
-+		read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
-+		dsintr = dsintr | 0x3c;			/* set bits 2..5 */
-+		write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
-+		read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
-+		dsintr = dsintr | 0x3;			/* set bits 0,1 */
-+		write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
-+	}
- 
- 	disable_mdi();
- 	spin_unlock_irq(&lp->lock);
-@@ -323,6 +346,19 @@
- 		dsintr = ~((1 << 10) | (1 << 8));
- 		write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
- 	}
-+	else if (lp->phy_type == MII_T78Q21x3_ID) {	/* for Teridian PHY */
-+		read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
-+		dsintr = dsintr & ~0x500;			/* clear bits 8, 10 */
-+		write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
-+	}
-+	else if (lp->phy_type == MII_DP83848_ID) {	/* National Semiconductor DP83848 PHY */
-+		read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
-+		dsintr = dsintr & ~0x3;				/* clear bits 0, 1 */
-+		write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
-+		read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
-+		dsintr = dsintr & ~0x3c;			/* clear bits 2..5 */
-+		write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
-+	}
- 
- 	disable_mdi();
- 	spin_unlock_irq(&lp->lock);
-@@ -535,8 +571,8 @@
- 		mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
- 	}
- 
--	at91_emac_write(AT91_EMAC_HSH, mc_filter[0]);
--	at91_emac_write(AT91_EMAC_HSL, mc_filter[1]);
-+	at91_emac_write(AT91_EMAC_HSL, mc_filter[0]);
-+	at91_emac_write(AT91_EMAC_HSH, mc_filter[1]);
- }
- 
- /*
-@@ -943,14 +979,22 @@
- 	struct net_device *dev;
- 	struct at91_private *lp;
- 	unsigned int val;
--	int res;
-+	struct resource *res;
-+	int ret;
- 
- 	dev = alloc_etherdev(sizeof(struct at91_private));
- 	if (!dev)
- 		return -ENOMEM;
- 
--	dev->base_addr = AT91_VA_BASE_EMAC;
--	dev->irq = AT91RM9200_ID_EMAC;
-+	/* Get I/O base address and IRQ */
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!res) {
-+		free_netdev(dev);
-+		return -ENODEV;
-+	}
-+	dev->base_addr = res->start;
-+	dev->irq = platform_get_irq(pdev, 0);
-+
- 	SET_MODULE_OWNER(dev);
- 
- 	/* Install the interrupt handler */
-@@ -1023,12 +1067,12 @@
- 	lp->phy_address = phy_address;	/* MDI address of PHY */
- 
- 	/* Register the network interface */
--	res = register_netdev(dev);
--	if (res) {
-+	ret = register_netdev(dev);
-+	if (ret) {
- 		free_irq(dev->irq, dev);
- 		free_netdev(dev);
- 		dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
--		return res;
-+		return ret;
- 	}
- 
- 	/* Determine current link speed */
-@@ -1063,10 +1107,16 @@
- 		printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
- 	else if (phy_type == MII_DP83847_ID)
- 		printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
-+	else if (phy_type == MII_DP83848_ID)
-+		printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
- 	else if (phy_type == MII_AC101L_ID)
- 		printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
- 	else if (phy_type == MII_KS8721_ID)
- 		printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
-+	else if (phy_type == MII_T78Q21x3_ID)
-+		printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
-+	else if (phy_type == MII_LAN83C185_ID)
-+		printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
- 
- 	return 0;
- }
-@@ -1104,8 +1154,11 @@
- 			case MII_RTL8201_ID:		/* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
- 			case MII_BCM5221_ID:		/* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
- 			case MII_DP83847_ID:		/* National Semiconductor DP83847:  */
-+			case MII_DP83848_ID:		/* National Semiconductor DP83848:  */
- 			case MII_AC101L_ID:		/* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
- 			case MII_KS8721_ID:		/* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
-+			case MII_T78Q21x3_ID:		/* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
-+			case MII_LAN83C185_ID:		/* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
- 				detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
- 				break;
- 		}
-diff -urN -x CVS linux-2.6.21/drivers/net/arm/at91_ether.h linux-2.6-stable/drivers/net/arm/at91_ether.h
---- linux-2.6.21/drivers/net/arm/at91_ether.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/net/arm/at91_ether.h	Tue May  8 12:13:31 2007
-@@ -17,39 +17,46 @@
- 
- 
- /* Davicom 9161 PHY */
--#define MII_DM9161_ID	0x0181b880
--#define MII_DM9161A_ID	0x0181b8a0
--
--/* Davicom specific registers */
--#define MII_DSCR_REG	16
--#define MII_DSCSR_REG	17
--#define MII_DSINTR_REG	21
-+#define MII_DM9161_ID		0x0181b880
-+#define MII_DM9161A_ID		0x0181b8a0
-+#define MII_DSCR_REG		16
-+#define MII_DSCSR_REG		17
-+#define MII_DSINTR_REG		21
- 
- /* Intel LXT971A PHY */
--#define MII_LXT971A_ID	0x001378E0
--
--/* Intel specific registers */
--#define MII_ISINTE_REG	18
--#define MII_ISINTS_REG	19
--#define MII_LEDCTRL_REG	20
-+#define MII_LXT971A_ID		0x001378E0
-+#define MII_ISINTE_REG		18
-+#define MII_ISINTS_REG		19
-+#define MII_LEDCTRL_REG		20
- 
- /* Realtek RTL8201 PHY */
--#define MII_RTL8201_ID	0x00008200
-+#define MII_RTL8201_ID		0x00008200
- 
- /* Broadcom BCM5221 PHY */
--#define MII_BCM5221_ID	0x004061e0
--
--/* Broadcom specific registers */
--#define MII_BCMINTR_REG	26
-+#define MII_BCM5221_ID		0x004061e0
-+#define MII_BCMINTR_REG		26
- 
- /* National Semiconductor DP83847 */
--#define MII_DP83847_ID	0x20005c30
-+#define MII_DP83847_ID		0x20005c30
-+
-+/* National Semiconductor DP83848 */
-+#define MII_DP83848_ID		0x20005c90
-+#define MII_DPPHYSTS_REG	16
-+#define MII_DPMICR_REG		17
-+#define MII_DPMISR_REG		18
- 
- /* Altima AC101L PHY */
--#define MII_AC101L_ID	0x00225520
-+#define MII_AC101L_ID		0x00225520
- 
- /* Micrel KS8721 PHY */
--#define MII_KS8721_ID	0x00221610
-+#define MII_KS8721_ID		0x00221610
-+
-+/* Teridian 78Q2123/78Q2133 */
-+#define MII_T78Q21x3_ID		0x000e7230
-+#define MII_T78Q21INT_REG	17
-+
-+/* SMSC LAN83C185 */
-+#define MII_LAN83C185_ID	0x0007C0A0
- 
- /* ........................................................................ */
- 
-diff -urN -x CVS linux-2.6.21/drivers/pcmcia/at91_cf.c linux-2.6-stable/drivers/pcmcia/at91_cf.c
---- linux-2.6.21/drivers/pcmcia/at91_cf.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/pcmcia/at91_cf.c	Tue May  8 12:13:31 2007
-@@ -332,20 +332,27 @@
- 	struct at91_cf_data	*board = cf->board;
- 
- 	pcmcia_socket_dev_suspend(&pdev->dev, mesg);
-+
- 	if (device_may_wakeup(&pdev->dev)) {
- 		enable_irq_wake(board->det_pin);
- 		if (board->irq_pin)
- 			enable_irq_wake(board->irq_pin);
--	} else {
--		disable_irq_wake(board->det_pin);
--		if (board->irq_pin)
--			disable_irq_wake(board->irq_pin);
- 	}
-+
- 	return 0;
- }
- 
- static int at91_cf_resume(struct platform_device *pdev)
- {
-+	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
-+	struct at91_cf_data	*board = cf->board;
-+
-+	if (device_may_wakeup(&pdev->dev)) {
-+		disable_irq_wake(board->det_pin);
-+		if (board->irq_pin)
-+			disable_irq_wake(board->irq_pin);
-+	}
-+
- 	pcmcia_socket_dev_resume(&pdev->dev);
- 	return 0;
- }
-@@ -360,7 +367,6 @@
- 		.name		= (char *) driver_name,
- 		.owner		= THIS_MODULE,
- 	},
--	.probe		= at91_cf_probe,
- 	.remove		= __exit_p(at91_cf_remove),
- 	.suspend	= at91_cf_suspend,
- 	.resume		= at91_cf_resume,
-@@ -370,7 +376,7 @@
- 
- static int __init at91_cf_init(void)
- {
--	return platform_driver_register(&at91_cf_driver);
-+	return platform_driver_probe(&at91_cf_driver, at91_cf_probe);
- }
- module_init(at91_cf_init);
- 
-diff -urN -x CVS linux-2.6.21/drivers/serial/atmel_serial.c linux-2.6-stable/drivers/serial/atmel_serial.c
---- linux-2.6.21/drivers/serial/atmel_serial.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/serial/atmel_serial.c	Tue May  8 12:13:31 2007
-@@ -7,6 +7,8 @@
-  *  Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
-  *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
-  *
-+ *  DMA support added by Chip Coldwell.
-+ *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2 of the License, or
-@@ -33,6 +35,7 @@
- #include <linux/sysrq.h>
- #include <linux/tty_flip.h>
- #include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
- #include <linux/atmel_pdc.h>
- 
- #include <asm/io.h>
-@@ -47,6 +50,11 @@
- 
- #include "atmel_serial.h"
- 
-+#define SUPPORT_PDC
-+#define PDC_BUFFER_SIZE		(L1_CACHE_BYTES << 3)
-+#warning "Revisit"
-+#define PDC_RX_TIMEOUT		(3 * 10)		/* 3 bytes */
-+
- #if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
- #define SUPPORT_SYSRQ
- #endif
-@@ -107,6 +115,13 @@
- static int (*atmel_open_hook)(struct uart_port *);
- static void (*atmel_close_hook)(struct uart_port *);
- 
-+struct atmel_dma_buffer {
-+	unsigned char	*buf;
-+	dma_addr_t	dma_addr;
-+	size_t		dma_size;
-+	unsigned int	ofs;
-+};
-+
- /*
-  * We wrap our port structure around the generic uart_port.
-  */
-@@ -114,10 +129,20 @@
- 	struct uart_port	uart;		/* uart */
- 	struct clk		*clk;		/* uart clock */
- 	unsigned short		suspended;	/* is port suspended? */
-+
-+	short			use_dma_rx;	/* enable PDC receiver */
-+	short			pdc_rx_idx;	/* current PDC RX buffer */
-+	struct atmel_dma_buffer	pdc_rx[2];	/* PDC receier */
-+
-+	short			use_dma_tx;	/* enable PDC transmitter */
-+	struct atmel_dma_buffer	pdc_tx;		/* PDC transmitter */
- };
- 
- static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
- 
-+#define PDC_RX_BUF(port)	&(port)->pdc_rx[(port)->pdc_rx_idx]
-+#define PDC_RX_SWITCH(port)	(port)->pdc_rx_idx = !(port)->pdc_rx_idx
-+
- #ifdef SUPPORT_SYSRQ
- static struct console atmel_console;
- #endif
-@@ -205,7 +230,12 @@
- {
- 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 
--	UART_PUT_IDR(port, ATMEL_US_TXRDY);
-+	if (atmel_port->use_dma_tx) {
-+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);		/* disable PDC transmit */
-+		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+	}
-+	else
-+		UART_PUT_IDR(port, ATMEL_US_TXRDY);
- }
- 
- /*
-@@ -215,7 +245,17 @@
- {
- 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 
--	UART_PUT_IER(port, ATMEL_US_TXRDY);
-+	if (atmel_port->use_dma_tx) {
-+		if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
-+			/* The transmitter is already running.  Yes, we
-+			   really need this.*/
-+			return;
-+
-+		UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);		/* re-enable PDC transmit */
-+	}
-+	else
-+		UART_PUT_IER(port, ATMEL_US_TXRDY);
- }
- 
- /*
-@@ -225,7 +265,12 @@
- {
- 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 
--	UART_PUT_IDR(port, ATMEL_US_RXRDY);
-+	if (atmel_port->use_dma_rx) {
-+		UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);		/* disable PDC receive */
-+		UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+	}
-+	else
-+		UART_PUT_IDR(port, ATMEL_US_RXRDY);
- }
- 
- /*
-@@ -248,6 +293,134 @@
- }
- 
- /*
-+ * Receive data via the PDC.  A buffer has been fulled.
-+ */
-+static void atmel_pdc_endrx(struct uart_port *port)
-+{
-+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+	struct tty_struct *tty = port->info->tty;
-+	struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+	unsigned int count;
-+
-+	count = pdc->dma_size - pdc->ofs;
-+	if (likely(count > 0)) {
-+		dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+		tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+		tty_flip_buffer_push(tty);
-+
-+		port->icount.rx += count;
-+	}
-+
-+	/* Set this buffer as the next receive buffer */
-+	pdc->ofs = 0;
-+	UART_PUT_RNPR(port, pdc->dma_addr);
-+	UART_PUT_RNCR(port, pdc->dma_size);
-+
-+	/* Switch to next buffer */
-+	PDC_RX_SWITCH(atmel_port);		/* next PDC buffer */
-+}
-+
-+/*
-+ * Receive data via the PDC.  At least one byte was received, but the
-+ * buffer was not full when the inter-character timeout expired.
-+ */
-+static void atmel_pdc_timeout(struct uart_port *port)
-+{
-+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+	struct tty_struct *tty = port->info->tty;
-+	struct atmel_dma_buffer *pdc = PDC_RX_BUF(atmel_port);
-+	/* unsigned */ int ofs, count;
-+
-+	ofs = UART_GET_RPR(port) - pdc->dma_addr;	/* current DMA adress */
-+	count = ofs - pdc->ofs;
-+
-+	if (likely(count > 0)) {
-+		dma_sync_single_for_cpu(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+		tty_insert_flip_string(tty, pdc->buf + pdc->ofs, count);
-+		tty_flip_buffer_push(tty);
-+
-+		pdc->ofs = ofs;
-+		port->icount.rx += count;
-+	}
-+
-+	/* reset the UART timeout */
-+	UART_PUT_CR(port, ATMEL_US_STTTO);
-+}
-+
-+/*
-+ * Deal with parity, framing and overrun errors.
-+ */
-+static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
-+{
-+	/* clear error */
-+	UART_PUT_CR(port, ATMEL_US_RSTSTA);
-+
-+	if (status & ATMEL_US_RXBRK) {
-+		status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);	/* ignore side-effect */
-+		port->icount.brk++;
-+	}
-+	if (status & ATMEL_US_PARE)
-+		port->icount.parity++;
-+	if (status & ATMEL_US_FRAME)
-+		port->icount.frame++;
-+	if (status & ATMEL_US_OVRE)
-+		port->icount.overrun++;
-+}
-+
-+/*
-+ * A transmission via the PDC is complete.
-+ */
-+static void atmel_pdc_endtx(struct uart_port *port)
-+{
-+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+	struct circ_buf *xmit = &port->info->xmit;
-+	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+	xmit->tail += pdc->ofs;
-+	if (xmit->tail >= SERIAL_XMIT_SIZE)
-+		xmit->tail -= SERIAL_XMIT_SIZE;
-+
-+	port->icount.tx += pdc->ofs;
-+	pdc->ofs = 0;
-+
-+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+		uart_write_wakeup(port);
-+}
-+
-+/*
-+ * The PDC transmitter is idle, so either start the next transfer or
-+ * disable the transmitter.
-+ */
-+static void atmel_pdc_txbufe(struct uart_port *port)
-+{
-+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
-+	struct circ_buf *xmit = &port->info->xmit;
-+	struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+	int count;
-+
-+	if (!uart_circ_empty(xmit)) {
-+		/* more to transmit - setup next transfer */
-+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);			/* disable PDC transmit */
-+		dma_sync_single_for_device(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+
-+		if (xmit->tail < xmit->head)
-+			count = xmit->head - xmit->tail;
-+		else
-+			count = SERIAL_XMIT_SIZE - xmit->tail;
-+		pdc->ofs = count;
-+
-+		UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
-+		UART_PUT_TCR(port, count);
-+		UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);			/* re-enable PDC transmit */
-+	}
-+	else {
-+		/* nothing left to transmit - disable the transmitter */
-+		UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);			/* disable PDC transmit */
-+		UART_PUT_IDR(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
-+	}
-+}
-+
-+/*
-  * Characters received (called from interrupt handler)
-  */
- static void atmel_rx_chars(struct uart_port *port)
-@@ -349,6 +522,14 @@
- 	status = UART_GET_CSR(port);
- 	pending = status & UART_GET_IMR(port);
- 	while (pending) {
-+		/* PDC receive */
-+		if (pending & ATMEL_US_ENDRX)
-+			atmel_pdc_endrx(port);
-+		if (pending & ATMEL_US_TIMEOUT)
-+			atmel_pdc_timeout(port);
-+		if (atmel_port->use_dma_rx && pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE | ATMEL_US_FRAME | ATMEL_US_PARE))
-+			atmel_pdc_rxerr(port, pending);
-+
- 		/* Interrupt receive */
- 		if (pending & ATMEL_US_RXRDY)
- 			atmel_rx_chars(port);
-@@ -363,6 +544,12 @@
- 		if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC))
- 			wake_up_interruptible(&port->info->delta_msr_wait);
- 
-+		/* PDC transmit */
-+		if (pending & ATMEL_US_ENDTX)
-+			atmel_pdc_endtx(port);
-+		if (pending & ATMEL_US_TXBUFE)
-+			atmel_pdc_txbufe(port);
-+
- 		/* Interrupt transmit */
- 		if (pending & ATMEL_US_TXRDY)
- 			atmel_tx_chars(port);
-@@ -401,6 +588,47 @@
- 	}
- 
- 	/*
-+	 * Initialize DMA (if necessary)
-+	 */
-+	if (atmel_port->use_dma_rx) {
-+		int i;
-+
-+		for (i = 0; i < 2; i++) {
-+			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+			pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
-+			if (pdc->buf == NULL) {
-+				if (i != 0) {
-+					dma_unmap_single(port->dev, atmel_port->pdc_rx[0].dma_addr, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+					kfree(atmel_port->pdc_rx[0].buf);
-+				}
-+				free_irq(port->irq, port);
-+				return -ENOMEM;
-+			}
-+			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-+			pdc->dma_size = PDC_BUFFER_SIZE;
-+			pdc->ofs = 0;
-+		}
-+
-+		atmel_port->pdc_rx_idx = 0;
-+
-+		UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
-+		UART_PUT_RCR(port, PDC_BUFFER_SIZE);
-+
-+		UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
-+		UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
-+	}
-+	if (atmel_port->use_dma_tx) {
-+		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+		struct circ_buf *xmit = &port->info->xmit;
-+
-+		pdc->buf = xmit->buf;
-+		pdc->dma_addr = dma_map_single(port->dev, pdc->buf, SERIAL_XMIT_SIZE, DMA_TO_DEVICE);
-+		pdc->dma_size = SERIAL_XMIT_SIZE;
-+		pdc->ofs = 0;
-+	}
-+
-+	/*
- 	 * If there is a specific "open" function (to register
- 	 * control line interrupts)
- 	 */
-@@ -418,7 +646,15 @@
- 	UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
- 	UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);		/* enable xmit & rcvr */
- 
--	UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
-+	if (atmel_port->use_dma_rx) {
-+		UART_PUT_RTOR(port, PDC_RX_TIMEOUT);		/* set UART timeout */
-+		UART_PUT_CR(port, ATMEL_US_STTTO);
-+
-+		UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
-+		UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);		/* enable PDC controller */
-+	}
-+	else
-+		UART_PUT_IER(port, ATMEL_US_RXRDY);		/* enable receive only */
- 
- 	return 0;
- }
-@@ -431,6 +667,31 @@
- 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 
- 	/*
-+	 * Ensure everything is stopped.
-+	 */
-+	atmel_stop_rx(port);
-+	atmel_stop_tx(port);
-+
-+	/*
-+	 * Shut-down the DMA.
-+	 */
-+	if (atmel_port->use_dma_rx) {
-+		int i;
-+
-+		for (i = 0; i < 2; i++) {
-+			struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
-+
-+			dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_FROM_DEVICE);
-+			kfree(pdc->buf);
-+		}
-+	}
-+	if (atmel_port->use_dma_tx) {
-+		struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
-+
-+		dma_unmap_single(port->dev, pdc->dma_addr, pdc->dma_size, DMA_TO_DEVICE);
-+	}
-+
-+	/*
- 	 * Disable all interrupts, port and break condition.
- 	 */
- 	UART_PUT_CR(port, ATMEL_US_RSTSTA);
-@@ -481,14 +742,20 @@
-  */
- static void atmel_set_termios(struct uart_port *port, struct ktermios * termios, struct ktermios * old)
- {
-+	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 	unsigned long flags;
- 	unsigned int mode, imr, quot, baud;
- 
-+	/* Get current mode register */
-+	mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+
- 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- 	quot = uart_get_divisor(port, baud);
- 
--	/* Get current mode register */
--	mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+	if (quot > 65535) {	/* BRGR is 16-bit, so switch to slower clock */
-+		quot /= 8;
-+		mode |= ATMEL_US_USCLKS_MCK_DIV8;
-+	}
- 
- 	/* byte size */
- 	switch (termios->c_cflag & CSIZE) {
-@@ -534,6 +801,9 @@
- 	if (termios->c_iflag & (BRKINT | PARMRK))
- 		port->read_status_mask |= ATMEL_US_RXBRK;
- 
-+	if (atmel_port->use_dma_rx)	/* need to enable error interrupts */
-+		UART_PUT_IER(port, port->read_status_mask);
-+
- 	/*
- 	 * Characters to ignore
- 	 */
-@@ -712,6 +982,13 @@
- 		clk_enable(atmel_port->clk);
- 		port->uartclk = clk_get_rate(atmel_port->clk);
- 	}
-+
-+#ifdef SUPPORT_PDC
-+	atmel_port->use_dma_rx = data->use_dma_rx;
-+	atmel_port->use_dma_tx = data->use_dma_tx;
-+	if (atmel_port->use_dma_tx)
-+		port->fifosize = PDC_BUFFER_SIZE;
-+#endif
- }
- 
- /*
-@@ -888,7 +1165,8 @@
- 	struct uart_port *port = platform_get_drvdata(pdev);
- 	struct atmel_uart_port *atmel_port = (struct atmel_uart_port *) port;
- 
--	if (device_may_wakeup(&pdev->dev) && !at91_suspend_entering_slow_clock())
-+	if (device_may_wakeup(&pdev->dev)
-+			&& !clk_must_disable(atmel_port->clk))
- 		enable_irq_wake(port->irq);
- 	else {
- 		uart_suspend_port(&atmel_uart, port);
-diff -urN -x CVS linux-2.6.21/drivers/serial/atmel_serial.h linux-2.6-stable/drivers/serial/atmel_serial.h
---- linux-2.6.21/drivers/serial/atmel_serial.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/serial/atmel_serial.h	Tue May  8 12:13:31 2007
-@@ -46,6 +46,9 @@
- #define			ATMEL_US_USMODE_ISO7816_T1	6
- #define			ATMEL_US_USMODE_IRDA		8
- #define		ATMEL_US_USCLKS		(3   <<  4)		/* Clock Selection */
-+#define			ATMEL_US_USCLKS_MCK		(0 <<  4)
-+#define			ATMEL_US_USCLKS_MCK_DIV8	(1 <<  4)
-+#define			ATMEL_US_USCLKS_SCK		(3 <<  4)
- #define		ATMEL_US_CHRL		(3   <<  6)		/* Character Length */
- #define			ATMEL_US_CHRL_5			(0 <<  6)
- #define			ATMEL_US_CHRL_6			(1 <<  6)
-diff -urN -x CVS linux-2.6.21/drivers/spi/Kconfig linux-2.6-stable/drivers/spi/Kconfig
---- linux-2.6.21/drivers/spi/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/spi/Kconfig	Tue May  8 14:31:24 2007
-@@ -54,6 +54,7 @@
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32) && SPI_MASTER
-+	select SPI_AT91_MANUAL_CS if ARCH_AT91RM9200
- 	help
- 	  This selects a driver for the Atmel SPI Controller, present on
- 	  many AT32 (AVR32) and AT91 (ARM) chips.
-@@ -82,6 +83,24 @@
- 	  inexpensive battery powered microcontroller evaluation board.
- 	  This same cable can be used to flash new firmware.
- 
-+config SPI_AT91
-+	tristate "AT91RM9200 Bitbang SPI Master"
-+	depends on SPI_MASTER && ARCH_AT91RM9200 && !SPI_ATMEL && EXPERIMENTAL
-+	select SPI_BITBANG
-+	select SPI_AT91_MANUAL_CS
-+	help
-+	  This is dumb PIO bitbanging driver for the Atmel AT91RM9200.
-+	  The SPI_ATMEL driver will be its replacement, using the native
-+	  SPI hardware and its DMA controller.
-+
-+config SPI_AT91_MANUAL_CS
-+	bool
-+	depends on ARCH_AT91RM9200
-+	help
-+	  Works around an AT91RM9200 problem whereby the SPI chip-select
-+	  will be wrongly disabled.  The workaround uses those pins as
-+	  GPIOs instead of letting the SPI controller manage them.
-+
- config SPI_IMX
- 	tristate "Freescale iMX SPI controller"
- 	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -urN -x CVS linux-2.6.21/drivers/spi/Makefile linux-2.6-stable/drivers/spi/Makefile
---- linux-2.6.21/drivers/spi/Makefile	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/spi/Makefile	Tue May  8 14:31:24 2007
-@@ -20,6 +20,7 @@
- obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
- obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
- obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
-+obj-$(CONFIG_SPI_AT91)			+= spi_at91_bitbang.o
- # 	... add above this line ...
- 
- # SPI protocol drivers (device/link on bus)
-diff -urN -x CVS linux-2.6.21/drivers/spi/spi_at91_bitbang.c linux-2.6-stable/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.21/drivers/spi/spi_at91_bitbang.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/spi/spi_at91_bitbang.c	Tue May  8 14:31:24 2007
-@@ -0,0 +1,207 @@
-+/*
-+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
-+ *
-+ * Copyright (C) 2006 David Brownell
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi_bitbang.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+
-+/*
-+ * FIXME this bitbanging version is just to help bootstrap systems until
-+ * there's a native SPI+IRQ+DMA controller driver ... such a driver should
-+ * be a drop-in replacement for this one, and much faster.
-+ *
-+ * remember:
-+ *
-+ *	- other at91 parts (like at91sam9) have multiple controllers
-+ *	  and different pin muxing; this version is at91rm9200 specfic.
-+ *
-+ *	- at91sam9261 SPI0 pins are directly muxed with MMC/SD pins.
-+ *
-+ *	- rm9200 spi chipselects drop wrongly, so the native driver
-+ *	  will need to use gpios much like this does.
-+ *
-+ *	- real hardware only allows 8..16 bits per word, while this
-+ *	  bitbanger allows 1..32 (incompatible superset).
-+ *
-+ *	- this disregards clock parameters.  with inlined gpio calls,
-+ *	  gcc 3.4.4 produces about 1.5 mbit/sec, more than 2x faster
-+ *	  than using the subroutined veresion from txrx_word().
-+ *
-+ *	- suspend/resume and <linux/clk.h> support is missing ...
-+ */
-+
-+#define	spi_miso_bit	AT91_PIN_PA0
-+#define	spi_mosi_bit	AT91_PIN_PA1
-+#define	spi_sck_bit	AT91_PIN_PA2
-+
-+struct at91_spi {
-+	struct spi_bitbang	bitbang;
-+	struct platform_device	*pdev;
-+};
-+
-+/*----------------------------------------------------------------------*/
-+
-+static inline void setsck(struct spi_device *spi, int is_on)
-+{
-+	at91_set_gpio_value(spi_sck_bit, is_on);
-+}
-+
-+static inline void setmosi(struct spi_device *spi, int is_on)
-+{
-+	at91_set_gpio_value(spi_mosi_bit, is_on);
-+}
-+
-+static inline int getmiso(struct spi_device *spi)
-+{
-+	return at91_get_gpio_value(spi_miso_bit);
-+}
-+
-+static void at91_spi_chipselect(struct spi_device *spi, int is_active)
-+{
-+	unsigned long cs = (unsigned long) spi->controller_data;
-+
-+	/* set default clock polarity */
-+	if (is_active)
-+		setsck(spi, spi->mode & SPI_CPOL);
-+
-+	/* only support active-low (default) */
-+	at91_set_gpio_value(cs, !is_active);
-+}
-+
-+/*
-+ * NOTE:  this is "as fast as we can"; it should be a function of
-+ * the device clock ...
-+ */
-+#define	spidelay(X)	do{} while(0)
-+
-+#define	EXPAND_BITBANG_TXRX
-+#include <linux/spi/spi_bitbang.h>
-+
-+static u32 at91_spi_txrx_word_mode0(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode1(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode2(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, 8);
-+}
-+
-+static u32 at91_spi_txrx_word_mode3(struct spi_device *spi,
-+		unsigned nsecs, u32 word, u8 bits)
-+{
-+	return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, 8);
-+}
-+
-+/*----------------------------------------------------------------------*/
-+
-+static int __init at91_spi_probe(struct platform_device *pdev)
-+{
-+	int			status;
-+	struct spi_master	*master;
-+	struct at91_spi		*at91_spi;
-+
-+	if (pdev->id != 0)	/* SPI0 bus */
-+		return -EINVAL;
-+
-+	master = spi_alloc_master(&pdev->dev, sizeof *at91_spi);
-+	if (!master)
-+		return -ENOMEM;
-+
-+	at91_spi = spi_master_get_devdata(master);
-+	at91_spi->pdev = pdev;
-+	platform_set_drvdata(pdev, at91_spi);
-+
-+	/* SPI and bitbang hookup */
-+	master->bus_num = 0;
-+	master->num_chipselect = 4;
-+
-+	at91_spi->bitbang.master = spi_master_get(master);
-+	at91_spi->bitbang.chipselect = at91_spi_chipselect;
-+	at91_spi->bitbang.txrx_word[SPI_MODE_0] = at91_spi_txrx_word_mode0;
-+	at91_spi->bitbang.txrx_word[SPI_MODE_1] = at91_spi_txrx_word_mode1;
-+	at91_spi->bitbang.txrx_word[SPI_MODE_2] = at91_spi_txrx_word_mode2;
-+	at91_spi->bitbang.txrx_word[SPI_MODE_3] = at91_spi_txrx_word_mode3;
-+
-+	status = spi_bitbang_start(&at91_spi->bitbang);
-+	if (status < 0)
-+		(void) spi_master_put(at91_spi->bitbang.master);
-+
-+	return status;
-+}
-+
-+static int __exit at91_spi_remove(struct platform_device *pdev)
-+{
-+	struct at91_spi	*at91_spi = platform_get_drvdata(pdev);
-+	int status;
-+
-+	/* stop() unregisters child devices too */
-+	status = spi_bitbang_stop(&at91_spi->bitbang);
-+	(void) spi_master_put(at91_spi->bitbang.master);
-+
-+	platform_set_drvdata(pdev, NULL);
-+	return status;
-+}
-+
-+static struct platform_driver at91_spi_driver = {
-+	.probe		= at91_spi_probe,
-+	.remove		= __exit_p(at91_spi_remove),
-+	.driver		= {
-+		.name	= "at91_spi",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init at91_spi_init(void)
-+{
-+	at91_set_gpio_output(spi_sck_bit, 0);
-+	at91_set_gpio_output(spi_mosi_bit, 0);
-+	at91_set_gpio_input(spi_miso_bit, 1 /* pullup */);
-+
-+	/* register driver */
-+	return platform_driver_register(&at91_spi_driver);
-+}
-+
-+static void __exit at91_spi_exit(void)
-+{
-+	platform_driver_unregister(&at91_spi_driver);
-+}
-+
-+device_initcall(at91_spi_init);
-+module_exit(at91_spi_exit);
-+
-+MODULE_ALIAS("at91_spi.0");
-+
-+MODULE_DESCRIPTION("AT91 SPI support (BOOTSTRAP/BITBANG VERSION)");
-+MODULE_AUTHOR("David Brownell");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/usb/gadget/Kconfig linux-2.6-stable/drivers/usb/gadget/Kconfig
---- linux-2.6.21/drivers/usb/gadget/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/gadget/Kconfig	Wed May  9 10:20:54 2007
-@@ -189,7 +189,7 @@
- 
- config USB_GADGET_AT91
- 	boolean "AT91 USB Device Port"
--	depends on ARCH_AT91
-+	depends on ARCH_AT91 && !ARCH_AT91SAM9RL
- 	select USB_GADGET_SELECTED
- 	help
- 	   Many Atmel AT91 processors (such as the AT91RM2000) have a
-diff -urN -x CVS linux-2.6.21/drivers/usb/gadget/at91_udc.c linux-2.6-stable/drivers/usb/gadget/at91_udc.c
---- linux-2.6.21/drivers/usb/gadget/at91_udc.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/gadget/at91_udc.c	Tue May  8 12:13:31 2007
-@@ -1804,7 +1804,7 @@
- 	 */
- 	if ((!udc->suspended && udc->addr)
- 			|| !wake
--			|| at91_suspend_entering_slow_clock()) {
-+			|| clk_must_disable(udc->fclk)) {
- 		pullup(udc, 0);
- 		wake = 0;
- 	} else
-diff -urN -x CVS linux-2.6.21/drivers/usb/host/ohci-at91.c linux-2.6-stable/drivers/usb/host/ohci-at91.c
---- linux-2.6.21/drivers/usb/host/ohci-at91.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/usb/host/ohci-at91.c	Tue May  8 12:13:31 2007
-@@ -299,7 +299,7 @@
- 	 *
- 	 * REVISIT: some boards will be able to turn VBUS off...
- 	 */
--	if (at91_suspend_entering_slow_clock()) {
-+	if (clk_must_disable(fclk)) {
- 		ohci_usb_reset (ohci);
- 		at91_stop_clock();
- 	}
-diff -urN -x CVS linux-2.6.21/drivers/video/Kconfig linux-2.6-stable/drivers/video/Kconfig
---- linux-2.6.21/drivers/video/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/Kconfig	Thu May 10 12:34:41 2007
-@@ -663,6 +663,17 @@
- 	  framebuffer.  Product specs at
- 	  <http://www.erd.epson.com/vdc/html/products.htm>.
- 
-+config FB_S1D15605
-+	tristate "Epson S1D15605 framebuffer support"
-+	depends on FB
-+	default m if MACH_KB9200
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  Build in support for the S1D15605 Epson Research 128x64
-+	  LCD controller as a framebuffer.
-+
- config FB_S1D13XXX
- 	tristate "Epson S1D13XXX framebuffer support"
- 	depends on FB
-@@ -674,6 +685,22 @@
- 	  working with S1D13806). Product specs at
- 	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
- 
-+config FB_ATMEL
-+	tristate "AT91/AT32 LCD Controller support"
-+	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || AVR32)
-+	select FB_CFB_FILLRECT
-+	select FB_CFB_COPYAREA
-+	select FB_CFB_IMAGEBLIT
-+	help
-+	  This enables support for the AT91/AT32 LCD Controller.
-+
-+config FB_INTSRAM
-+	bool "Frame Buffer in internal SRAM"
-+	depends on FB_ATMEL && ARCH_AT91SAM9261
-+	help
-+	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-+	  to let frame buffer in external SDRAM.
-+
- config FB_NVIDIA
- 	tristate "nVidia Framebuffer Support"
- 	depends on FB && PCI
-diff -urN -x CVS linux-2.6.21/drivers/video/Makefile linux-2.6-stable/drivers/video/Makefile
---- linux-2.6.21/drivers/video/Makefile	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/Makefile	Thu May 10 12:34:01 2007
-@@ -75,6 +75,8 @@
- obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
- obj-$(CONFIG_FB_HIT)              += hitfb.o
- obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
-+obj-$(CONFIG_FB_S1D15605)	  += s1d15605fb.o
-+obj-$(CONFIG_FB_ATMEL)            += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
-diff -urN -x CVS linux-2.6.21/drivers/video/atmel_lcdfb.c linux-2.6-stable/drivers/video/atmel_lcdfb.c
---- linux-2.6.21/drivers/video/atmel_lcdfb.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/atmel_lcdfb.c	Thu May 10 12:34:01 2007
-@@ -0,0 +1,752 @@
-+/*
-+ *  Driver for AT91/AT32 LCD Controller
-+ *
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/gpio.h>
-+
-+#include <video/atmel_lcdc.h>
-+
-+#define lcdc_readl(sinfo, reg)		__raw_readl((sinfo)->mmio+(reg))
-+#define lcdc_writel(sinfo, reg, val)	__raw_writel((val), (sinfo)->mmio+(reg))
-+
-+/* configurable parameters */
-+#define ATMEL_LCDC_CVAL_DEFAULT		0xc8
-+#define ATMEL_LCDC_DMA_BURST_LEN	8
-+
-+#if defined(CONFIG_ARCH_AT91SAM9263)
-+#define ATMEL_LCDC_FIFO_SIZE		2048
-+#else
-+#define ATMEL_LCDC_FIFO_SIZE		512
-+#endif
-+
-+#if defined(CONFIG_ARCH_AT91)
-+#define	ATMEL_LCDFB_FBINFO_DEFAULT	FBINFO_DEFAULT
-+
-+static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+					struct fb_var_screeninfo *var)
-+{
-+
-+}
-+#elif defined(CONFIG_AVR32)
-+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
-+					| FBINFO_PARTIAL_PAN_OK \
-+					| FBINFO_HWACCEL_XPAN \
-+					| FBINFO_HWACCEL_YPAN)
-+
-+static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+				     struct fb_var_screeninfo *var)
-+{
-+	u32 dma2dcfg;
-+	u32 pixeloff;
-+
-+	pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
-+
-+	dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
-+	dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
-+
-+	/* Update configuration */
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
-+		    lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
-+		    | ATMEL_LCDC_DMAUPDT);
-+}
-+#endif
-+
-+
-+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
-+	.type		= FB_TYPE_PACKED_PIXELS,
-+	.visual		= FB_VISUAL_TRUECOLOR,
-+	.xpanstep	= 0,
-+	.ypanstep	= 0,
-+	.ywrapstep	= 0,
-+	.accel		= FB_ACCEL_NONE,
-+};
-+
-+
-+static void atmel_lcdfb_update_dma(struct fb_info *info,
-+			       struct fb_var_screeninfo *var)
-+{
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	struct fb_fix_screeninfo *fix = &info->fix;
-+	unsigned long dma_addr;
-+
-+	dma_addr = (fix->smem_start + var->yoffset * fix->line_length
-+		    + var->xoffset * var->bits_per_pixel / 8);
-+
-+	dma_addr &= ~3UL;
-+
-+	/* Set framebuffer DMA base address and pixel offset */
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
-+
-+	atmel_lcdfb_update_dma2d(sinfo, var);
-+}
-+
-+static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+	struct fb_info *info = sinfo->info;
-+
-+	dma_free_writecombine(info->device, info->fix.smem_len,
-+				info->screen_base, info->fix.smem_start);
-+}
-+
-+/**
-+ *	atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
-+ *	@sinfo: the frame buffer to allocate memory for
-+ */
-+static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
-+{
-+	struct fb_info *info = sinfo->info;
-+	struct fb_var_screeninfo *var = &info->var;
-+
-+	info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-+			    * ((var->bits_per_pixel + 7) / 8));
-+
-+	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
-+					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
-+
-+	if (!info->screen_base) {
-+		return -ENOMEM;
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ *      atmel_lcdfb_check_var - Validates a var passed in.
-+ *      @var: frame buffer variable screen structure
-+ *      @info: frame buffer structure that represents a single frame buffer
-+ *
-+ *	Checks to see if the hardware supports the state requested by
-+ *	var passed in. This function does not alter the hardware
-+ *	state!!!  This means the data stored in struct fb_info and
-+ *	struct atmel_lcdfb_info do not change. This includes the var
-+ *	inside of struct fb_info.  Do NOT change these. This function
-+ *	can be called on its own if we intent to only test a mode and
-+ *	not actually set it. The stuff in modedb.c is a example of
-+ *	this. If the var passed in is slightly off by what the
-+ *	hardware can support then we alter the var PASSED in to what
-+ *	we can do. If the hardware doesn't support mode change a
-+ *	-EINVAL will be returned by the upper layers. You don't need
-+ *	to implement this function then. If you hardware doesn't
-+ *	support changing the resolution then this function is not
-+ *	needed. In this case the driver would just provide a var that
-+ *	represents the static state the screen is in.
-+ *
-+ *	Returns negative errno on error, or zero on success.
-+ */
-+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
-+			     struct fb_info *info)
-+{
-+	struct device *dev = info->device;
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	unsigned long clk_value_khz;
-+
-+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+	dev_dbg(dev, "%s:\n", __func__);
-+	dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
-+	dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
-+	dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
-+	dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
-+
-+	if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
-+		dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
-+		return -EINVAL;
-+	}
-+
-+	/* Force same alignment for each line */
-+	var->xres = (var->xres + 3) & ~3UL;
-+	var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
-+
-+	var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+	var->transp.msb_right = 0;
-+	var->transp.offset = var->transp.length = 0;
-+	var->xoffset = var->yoffset = 0;
-+
-+	switch (var->bits_per_pixel) {
-+	case 2:
-+	case 4:
-+	case 8:
-+		var->red.offset = var->green.offset = var->blue.offset = 0;
-+		var->red.length = var->green.length = var->blue.length
-+			= var->bits_per_pixel;
-+		break;
-+	case 15:
-+	case 16:
-+		var->red.offset = 0;
-+		var->green.offset = 5;
-+		var->blue.offset = 10;
-+		var->red.length = var->green.length = var->blue.length = 5;
-+		break;
-+	case 24:
-+	case 32:
-+		var->red.offset = 0;
-+		var->green.offset = 8;
-+		var->blue.offset = 16;
-+		var->red.length = var->green.length = var->blue.length = 8;
-+		break;
-+	default:
-+		dev_err(dev, "color depth %d not supported\n",
-+					var->bits_per_pixel);
-+		return -EINVAL;
-+	}
-+
-+	return 0;
-+}
-+
-+/**
-+ *      atmel_lcdfb_set_par - Alters the hardware state.
-+ *      @info: frame buffer structure that represents a single frame buffer
-+ *
-+ *	Using the fb_var_screeninfo in fb_info we set the resolution
-+ *	of the this particular framebuffer. This function alters the
-+ *	par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ *	not alter var in fb_info since we are using that data. This
-+ *	means we depend on the data in var inside fb_info to be
-+ *	supported by the hardware.  atmel_lcdfb_check_var is always called
-+ *	before atmel_lcdfb_set_par to ensure this.  Again if you can't
-+ *	change the resolution you don't need this function.
-+ *
-+ */
-+static int atmel_lcdfb_set_par(struct fb_info *info)
-+{
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	unsigned long value;
-+	unsigned long clk_value_khz;
-+
-+	dev_dbg(info->device, "%s:\n", __func__);
-+	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
-+		 info->var.xres, info->var.yres,
-+		 info->var.xres_virtual, info->var.yres_virtual);
-+
-+	/* Turn off the LCD controller and the DMA controller */
-+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-+
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-+
-+	if (info->var.bits_per_pixel <= 8)
-+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+	else
-+		info->fix.visual = FB_VISUAL_TRUECOLOR;
-+
-+	info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
-+
-+	/* Re-initialize the DMA engine... */
-+	dev_dbg(info->device, "  * update DMA engine\n");
-+	atmel_lcdfb_update_dma(info, &info->var);
-+
-+	/* ...set frame size and burst length = 8 words (?) */
-+	value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
-+	value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
-+
-+	/* Now, the LCDC core... */
-+
-+	/* Set pixel clock */
-+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
-+
-+	value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
-+
-+	if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
-+		value++;
-+
-+	value = (value / 2) - 1;
-+
-+	if (value <= 0) {
-+		dev_notice(info->device, "Bypassing pixel clock divider\n");
-+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
-+	} else
-+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+
-+	/* Initialize control register 2 */
-+	value = sinfo->default_lcdcon2;
-+
-+	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+		value |= ATMEL_LCDC_INVLINE_INVERTED;
-+	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+		value |= ATMEL_LCDC_INVFRAME_INVERTED;
-+
-+	switch (info->var.bits_per_pixel) {
-+		case 1:	value |= ATMEL_LCDC_PIXELSIZE_1; break;
-+		case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
-+		case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
-+		case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
-+		case 15: /* fall through */
-+		case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
-+		case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
-+		case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
-+		default: BUG(); break;
-+	}
-+	dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
-+	lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
-+
-+	/* Vertical timing */
-+	value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
-+	value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
-+	value |= info->var.lower_margin;
-+	dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
-+	lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
-+
-+	/* Horizontal timing */
-+	value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
-+	value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
-+	value |= (info->var.left_margin - 1);
-+	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
-+	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-+
-+	/* Display size */
-+	value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+	value |= info->var.yres - 1;
-+	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-+
-+	/* FIFO Threshold: Use formula from data sheet */
-+	value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
-+	lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
-+
-+	/* Toggle LCD_MODE every frame */
-+	lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
-+
-+	/* Disable all interrupts */
-+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
-+
-+	/* Set contrast */
-+	value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
-+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
-+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
-+	/* ...wait for DMA engine to become idle... */
-+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-+		msleep(10);
-+
-+	dev_dbg(info->device, "  * re-enable DMA engine\n");
-+	/* ...and enable it with updated configuration */
-+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-+
-+	dev_dbg(info->device, "  * re-enable LCDC core\n");
-+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-+		(sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-+
-+	dev_dbg(info->device, "  * DONE\n");
-+
-+	return 0;
-+}
-+
-+static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
-+{
-+	chan &= 0xffff;
-+	chan >>= 16 - bf->length;
-+	return chan << bf->offset;
-+}
-+
-+/**
-+ *  	atmel_lcdfb_setcolreg - Optional function. Sets a color register.
-+ *      @regno: Which register in the CLUT we are programming
-+ *      @red: The red value which can be up to 16 bits wide
-+ *	@green: The green value which can be up to 16 bits wide
-+ *	@blue:  The blue value which can be up to 16 bits wide.
-+ *	@transp: If supported the alpha value which can be up to 16 bits wide.
-+ *      @info: frame buffer info structure
-+ *
-+ *  	Set a single color register. The values supplied have a 16 bit
-+ *  	magnitude which needs to be scaled in this function for the hardware.
-+ *	Things to take into consideration are how many color registers, if
-+ *	any, are supported with the current color visual. With truecolor mode
-+ *	no color palettes are supported. Here a psuedo palette is created
-+ *	which we store the value in pseudo_palette in struct fb_info. For
-+ *	pseudocolor mode we have a limited color palette. To deal with this
-+ *	we can program what color is displayed for a particular pixel value.
-+ *	DirectColor is similar in that we can program each color field. If
-+ *	we have a static colormap we don't need to implement this function.
-+ *
-+ *	Returns negative errno on error, or zero on success. In an
-+ *	ideal world, this would have been the case, but as it turns
-+ *	out, the other drivers return 1 on failure, so that's what
-+ *	we're going to do.
-+ */
-+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
-+			     unsigned int green, unsigned int blue,
-+			     unsigned int transp, struct fb_info *info)
-+{
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	unsigned int val;
-+	u32 *pal;
-+	int ret = 1;
-+
-+	if (info->var.grayscale)
-+		red = green = blue = (19595 * red + 38470 * green
-+				      + 7471 * blue) >> 16;
-+
-+	switch (info->fix.visual) {
-+	case FB_VISUAL_TRUECOLOR:
-+		if (regno < 16) {
-+			pal = info->pseudo_palette;
-+
-+			val  = chan_to_field(red, &info->var.red);
-+			val |= chan_to_field(green, &info->var.green);
-+			val |= chan_to_field(blue, &info->var.blue);
-+
-+			pal[regno] = val;
-+			ret = 0;
-+		}
-+		break;
-+
-+	case FB_VISUAL_PSEUDOCOLOR:
-+		if (regno < 256) {
-+			val  = ((red   >> 11) & 0x001f);
-+			val |= ((green >>  6) & 0x03e0);
-+			val |= ((blue  >>  1) & 0x7c00);
-+
-+			/*
-+			 * TODO: intensity bit. Maybe something like
-+			 *   ~(red[10] ^ green[10] ^ blue[10]) & 1
-+			 */
-+
-+			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+			ret = 0;
-+		}
-+		break;
-+	}
-+
-+	return ret;
-+}
-+
-+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
-+			       struct fb_info *info)
-+{
-+	dev_dbg(info->device, "%s\n", __func__);
-+
-+	atmel_lcdfb_update_dma(info, var);
-+
-+	return 0;
-+}
-+
-+static struct fb_ops atmel_lcdfb_ops = {
-+	.owner		= THIS_MODULE,
-+	.fb_check_var	= atmel_lcdfb_check_var,
-+	.fb_set_par	= atmel_lcdfb_set_par,
-+	.fb_setcolreg	= atmel_lcdfb_setcolreg,
-+	.fb_pan_display	= atmel_lcdfb_pan_display,
-+	.fb_fillrect	= cfb_fillrect,
-+	.fb_copyarea	= cfb_copyarea,
-+	.fb_imageblit	= cfb_imageblit,
-+};
-+
-+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
-+{
-+	struct fb_info *info = dev_id;
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+	u32 status;
-+
-+	status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
-+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
-+	return IRQ_HANDLED;
-+}
-+
-+static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
-+{
-+	struct fb_info *info = sinfo->info;
-+	int ret = 0;
-+
-+	memset_io(info->screen_base, 0, info->fix.smem_len);
-+	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
-+
-+	dev_info(info->device,
-+	       "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+	       (unsigned long)info->fix.smem_len / 1024,
-+	       (unsigned long)info->fix.smem_start,
-+	       info->screen_base);
-+
-+	/* Allocate colormap */
-+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
-+	if (ret < 0)
-+		dev_err(info->device, "Alloc color map failed\n");
-+
-+	return ret;
-+}
-+
-+static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+	if (sinfo->bus_clk)
-+		clk_enable(sinfo->bus_clk);
-+	clk_enable(sinfo->lcdc_clk);
-+}
-+
-+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
-+{
-+	if (sinfo->bus_clk)
-+		clk_disable(sinfo->bus_clk);
-+	clk_disable(sinfo->lcdc_clk);
-+}
-+
-+
-+static int __init atmel_lcdfb_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fb_info *info;
-+	struct atmel_lcdfb_info *sinfo;
-+	struct atmel_lcdfb_info *pdata_sinfo;
-+	struct resource *regs = NULL;
-+	struct resource *map = NULL;
-+	int ret;
-+
-+	dev_dbg(dev, "%s BEGIN\n", __func__);
-+
-+	ret = -ENOMEM;
-+	info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
-+	if (!info) {
-+		dev_err(dev, "cannot allocate memory\n");
-+		goto out;
-+	}
-+
-+	sinfo = info->par;
-+
-+	if (dev->platform_data) {
-+		pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
-+		sinfo->default_bpp = pdata_sinfo->default_bpp;
-+		sinfo->default_dmacon = pdata_sinfo->default_dmacon;
-+		sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
-+		sinfo->default_monspecs = pdata_sinfo->default_monspecs;
-+		sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
-+		sinfo->guard_time = pdata_sinfo->guard_time;
-+	} else {
-+		dev_err(dev, "cannot get default configuration\n");
-+		goto free_info;
-+	}
-+	sinfo->info = info;
-+	sinfo->pdev = pdev;
-+
-+	strcpy(info->fix.id, sinfo->pdev->name);
-+	info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
-+	info->pseudo_palette = sinfo->pseudo_palette;
-+	info->fbops = &atmel_lcdfb_ops;
-+
-+	memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
-+	info->fix = atmel_lcdfb_fix;
-+
-+	/* Enable LCDC Clocks */
-+	if (cpu_is_at91sam9261()) {
-+		sinfo->bus_clk = clk_get(dev, "hck1");
-+		if (IS_ERR(sinfo->bus_clk)) {
-+			ret = PTR_ERR(sinfo->bus_clk);
-+			goto free_info;
-+		}
-+	}
-+	sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
-+	if (IS_ERR(sinfo->lcdc_clk)) {
-+		ret = PTR_ERR(sinfo->lcdc_clk);
-+		goto put_bus_clk;
-+	}
-+	atmel_lcdfb_start_clock(sinfo);
-+
-+	ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+			info->monspecs.modedb_len, info->monspecs.modedb,
-+			sinfo->default_bpp);
-+	if (!ret) {
-+		dev_err(dev, "no suitable video mode found\n");
-+		goto stop_clk;
-+	}
-+
-+
-+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	if (!regs) {
-+		dev_err(dev, "resources unusable\n");
-+		ret = -ENXIO;
-+		goto stop_clk;
-+	}
-+
-+	sinfo->irq_base = platform_get_irq(pdev, 0);
-+	if (sinfo->irq_base < 0) {
-+		dev_err(dev, "unable to get irq\n");
-+		ret = sinfo->irq_base;
-+		goto stop_clk;
-+	}
-+
-+	/* Initialize video memory */
-+	map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+	if (map) {
-+		/* use a pre-allocated memory buffer */
-+		info->fix.smem_start = map->start;
-+		info->fix.smem_len = map->end - map->start + 1;
-+		if (!request_mem_region(info->fix.smem_start,
-+					info->fix.smem_len, pdev->name)) {
-+			ret = -EBUSY;
-+			goto stop_clk;
-+		}
-+
-+		info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
-+		if (!info->screen_base)
-+			goto release_intmem;
-+	} else {
-+		/* alocate memory buffer */
-+		ret = atmel_lcdfb_alloc_video_memory(sinfo);
-+		if (ret < 0) {
-+			dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
-+			goto stop_clk;
-+		}
-+	}
-+
-+	/* LCDC registers */
-+	info->fix.mmio_start = regs->start;
-+	info->fix.mmio_len = regs->end - regs->start + 1;
-+
-+	if (!request_mem_region(info->fix.mmio_start,
-+				info->fix.mmio_len, pdev->name)) {
-+		ret = -EBUSY;
-+		goto free_fb;
-+	}
-+
-+	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+	if (!sinfo->mmio) {
-+		dev_err(dev, "cannot map LCDC registers\n");
-+		goto release_mem;
-+	}
-+
-+	/* interrupt */
-+	ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
-+	if (ret) {
-+		dev_err(dev, "request_irq failed: %d\n", ret);
-+		goto unmap_mmio;
-+	}
-+
-+	ret = atmel_lcdfb_init_fbinfo(sinfo);
-+	if (ret < 0) {
-+		dev_err(dev, "init fbinfo failed: %d\n", ret);
-+		goto unregister_irqs;
-+	}
-+
-+	/*
-+	 * This makes sure that our colour bitfield
-+	 * descriptors are correctly initialised.
-+	 */
-+	atmel_lcdfb_check_var(&info->var, info);
-+
-+	ret = fb_set_var(info, &info->var);
-+	if (ret) {
-+		dev_warn(dev, "unable to set display parameters\n");
-+		goto free_cmap;
-+	}
-+
-+	dev_set_drvdata(dev, info);
-+
-+	/*
-+	 * Tell the world that we're ready to go
-+	 */
-+	ret = register_framebuffer(info);
-+	if (ret < 0) {
-+		dev_err(dev, "failed to register framebuffer device: %d\n", ret);
-+		goto free_cmap;
-+	}
-+
-+	/* Power up the LCDC screen */
-+	if (sinfo->atmel_lcdfb_power_control)
-+		sinfo->atmel_lcdfb_power_control(1);
-+
-+	dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
-+		       info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
-+
-+	return 0;
-+
-+
-+free_cmap:
-+	fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+	free_irq(sinfo->irq_base, info);
-+unmap_mmio:
-+	iounmap(sinfo->mmio);
-+release_mem:
-+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+	if (map)
-+		iounmap(info->screen_base);
-+	else
-+		atmel_lcdfb_free_video_memory(sinfo);
-+
-+release_intmem:
-+	if (map)
-+		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+stop_clk:
-+	atmel_lcdfb_stop_clock(sinfo);
-+	clk_put(sinfo->lcdc_clk);
-+put_bus_clk:
-+	if (sinfo->bus_clk)
-+		clk_put(sinfo->bus_clk);
-+free_info:
-+	framebuffer_release(info);
-+out:
-+	dev_dbg(dev, "%s FAILED\n", __func__);
-+	return ret;
-+}
-+
-+static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fb_info *info = dev_get_drvdata(dev);
-+	struct atmel_lcdfb_info *sinfo = info->par;
-+
-+	if (!sinfo)
-+		return 0;
-+
-+	if (sinfo->atmel_lcdfb_power_control)
-+		sinfo->atmel_lcdfb_power_control(0);
-+	unregister_framebuffer(info);
-+	atmel_lcdfb_stop_clock(sinfo);
-+	clk_put(sinfo->lcdc_clk);
-+	if (sinfo->bus_clk)
-+		clk_put(sinfo->bus_clk);
-+	fb_dealloc_cmap(&info->cmap);
-+	free_irq(sinfo->irq_base, info);
-+	iounmap(sinfo->mmio);
-+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+	if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
-+		iounmap(info->screen_base);
-+		release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+	} else {
-+		atmel_lcdfb_free_video_memory(sinfo);
-+	}
-+
-+	dev_set_drvdata(dev, NULL);
-+	framebuffer_release(info);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver atmel_lcdfb_driver = {
-+	.remove		= __exit_p(atmel_lcdfb_remove),
-+	.driver		= {
-+		.name	= "atmel_lcdfb",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init atmel_lcdfb_init(void)
-+{
-+	return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
-+}
-+
-+static void __exit atmel_lcdfb_exit(void)
-+{
-+	platform_driver_unregister(&atmel_lcdfb_driver);
-+}
-+
-+module_init(atmel_lcdfb_init);
-+module_exit(atmel_lcdfb_exit);
-+
-+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
-+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/Kconfig linux-2.6-stable/drivers/video/backlight/Kconfig
---- linux-2.6.21/drivers/video/backlight/Kconfig	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/backlight/Kconfig	Tue May  8 12:13:31 2007
-@@ -63,3 +63,11 @@
- 	help
- 	  If you have a Frontpath ProGear say Y to enable the
- 	  backlight driver.
-+
-+config BACKLIGHT_KB920x
-+	tristate "KwikByte KB9202 Backlight Driver"
-+	depends on BACKLIGHT_CLASS_DEVICE && MACH_KB9200
-+	default y
-+	help
-+	  If you have a KwikByte KB9202 board, say Y to enable the
-+	  backlight driver.
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/Makefile linux-2.6-stable/drivers/video/backlight/Makefile
---- linux-2.6.21/drivers/video/backlight/Makefile	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/drivers/video/backlight/Makefile	Tue May  8 12:13:31 2007
-@@ -6,3 +6,4 @@
- obj-$(CONFIG_BACKLIGHT_HP680)	+= hp680_bl.o
- obj-$(CONFIG_BACKLIGHT_LOCOMO)	+= locomolcd.o
- obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
-+obj-$(CONFIG_BACKLIGHT_KB920x)	+= kb920x_bl.o
-diff -urN -x CVS linux-2.6.21/drivers/video/backlight/kb920x_bl.c linux-2.6-stable/drivers/video/backlight/kb920x_bl.c
---- linux-2.6.21/drivers/video/backlight/kb920x_bl.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/backlight/kb920x_bl.c	Tue May  8 12:13:31 2007
-@@ -0,0 +1,164 @@
-+/*
-+ * Backlight Driver for KB9202
-+ *
-+ * Copyright (c) 2006 KwikByte
-+ *
-+ * Based on Sharp's Corgi Backlight Driver
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/spinlock.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+
-+#include <asm/arch/gpio.h>
-+
-+/* The backlight is on(1)/off(0) */
-+#define	KB9202_DEFAULT_INTENSITY	1
-+#define	KB9202_MAX_INTENSITY		1
-+
-+static int kb9202bl_suspended;
-+static int current_intensity = 0;
-+static DEFINE_SPINLOCK(bl_lock);
-+
-+static int kb9202bl_set_intensity(struct backlight_device *bd)
-+{
-+	unsigned long flags;
-+	int intensity = bd->props.brightness;
-+
-+	if (bd->props.power != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+	if (bd->props.fb_blank != FB_BLANK_UNBLANK)
-+		intensity = 0;
-+	if (kb9202bl_suspended)
-+		intensity = 0;
-+
-+	if ((!current_intensity) && (bd->props.power == FB_BLANK_UNBLANK))
-+		intensity = 1;
-+
-+	spin_lock_irqsave(&bl_lock, flags);
-+	if (intensity)
-+		gpio_set_value(AT91_PIN_PC23, 1);
-+	else
-+		gpio_set_value(AT91_PIN_PC23, 0);
-+	spin_unlock_irqrestore(&bl_lock, flags);
-+
-+	current_intensity = intensity;
-+
-+	return 0;
-+}
-+
-+static int kb9202bl_get_intensity(struct backlight_device *bd)
-+{
-+	return current_intensity;
-+}
-+
-+static struct backlight_ops kb9202bl_ops = {
-+	.get_brightness	= kb9202bl_get_intensity,
-+	.update_status	= kb9202bl_set_intensity,
-+};
-+
-+static int __init kb9202bl_probe(struct platform_device *pdev)
-+{
-+	struct backlight_device *bd;
-+
-+	bd = backlight_device_register ("kb9202-bl", &pdev->dev, NULL, &kb9202bl_ops);
-+	if (IS_ERR(bd))
-+		return PTR_ERR(bd);
-+
-+	platform_set_drvdata(pdev, bd);
-+
-+	bd->props.max_brightness = KB9202_MAX_INTENSITY;
-+	bd->props.brightness = KB9202_DEFAULT_INTENSITY;
-+	(void) kb9202bl_set_intensity(bd);
-+
-+	return 0;
-+}
-+
-+static int kb9202bl_remove(struct platform_device *pdev)
-+{
-+	struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+	bd->props.brightness = 0;
-+	bd->props.power = 0;
-+	(void) kb9202bl_set_intensity(bd);
-+
-+	backlight_device_unregister(bd);
-+
-+	return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int kb9202bl_suspend(struct platform_device *dev, pm_message_t state)
-+{
-+	struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+	kb9202bl_suspended = 1;
-+	(void) kb9202bl_set_intensity(bd);
-+	return 0;
-+}
-+
-+static int kb9202bl_resume(struct platform_device *dev)
-+{
-+	struct backlight_device *bd = platform_get_drvdata(pdev);
-+
-+	kb9202bl_suspended = 0;
-+	(void) kb9202bl_set_intensity(bd);
-+	return 0;
-+}
-+#else
-+#define kb9202bl_suspend	NULL
-+#define kb9202bl_resume		NULL
-+#endif
-+
-+static struct platform_driver kb9202bl_driver = {
-+	.probe		= kb9202bl_probe,
-+	.remove		= kb9202bl_remove,
-+	.suspend	= kb9202bl_suspend,
-+	.resume		= kb9202bl_resume,
-+	.driver		= {
-+		.name	= "kb9202-bl",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static struct platform_device *kb9202bl_device;
-+
-+static int __init kb9202bl_init(void)
-+{
-+	int ret;
-+
-+	ret = platform_driver_register(&kb9202bl_driver);
-+	if (!ret) {
-+		kb9202bl_device = platform_device_alloc("kb9202-bl", -1);
-+		if (!kb9202bl_device)
-+			return -ENOMEM;
-+
-+		ret = platform_device_add(kb9202bl_device);
-+		if (ret) {
-+			platform_device_put(kb9202bl_device);
-+			platform_driver_unregister(&kb9202bl_driver);
-+		}
-+	}
-+	return ret;
-+}
-+
-+static void __exit kb9202bl_exit(void)
-+{
-+	platform_device_unregister(kb9202bl_device);
-+	platform_driver_unregister(&kb9202bl_driver);
-+}
-+
-+module_init(kb9202bl_init);
-+module_exit(kb9202bl_exit);
-+
-+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
-+MODULE_DESCRIPTION("KB9202 Backlight Driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/drivers/video/s1d15605fb.c linux-2.6-stable/drivers/video/s1d15605fb.c
---- linux-2.6.21/drivers/video/s1d15605fb.c	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/drivers/video/s1d15605fb.c	Tue May  8 12:13:31 2007
-@@ -0,0 +1,659 @@
-+/*
-+ *  drivers/video/s1d15605.c
-+ *
-+ * Adapted from several sources including:
-+ * 1) Driver for AT91 LCD Controller
-+ *    Copyright (C) 2006 Atmel
-+ *
-+ * 2) Copyright (C) 2005 S. Kevin Hester
-+ *
-+ *   This file is subject to the terms and conditions of the GNU General Public
-+ *   License. See the file COPYING in the main directory of this archive for
-+ *   more details.
-+ *
-+ *   This is a basic framebuffer driver for the Optrex F-51320 128x64 mono LCD
-+ *   display.  This display uses a clone of the common Epson SED 1531 display
-+ *   controller.
-+ *
-+ *   I've heavily borrowed code from the vfb.c driver.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#ifdef DEBUG
-+#define MSG(string, args...) printk("s1d15605fb:" string, ##args)
-+#else
-+#define MSG(string, args...)
-+#endif
-+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/clk.h>
-+#include <linux/fb.h>
-+#include <linux/init.h>
-+#include <linux/delay.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+#include <asm/backlight.h>
-+#endif
-+
-+#define VIDEOWIDTH		128
-+#define VIDEOHEIGHT		64
-+#define VIDEODEPTH		1	/* bits/pixel */
-+#define VIDEOWIDTH_BYTES	((VIDEOWIDTH * VIDEODEPTH) / 8)
-+
-+/* The number of bytes that actually go to the device */
-+#define ACTUALVIDEOMEMSIZE	(VIDEOWIDTH_BYTES * VIDEOHEIGHT)
-+#define VIDEOMEMSIZE		PAGE_SIZE
-+
-+static struct fb_var_screeninfo s1d15605_default __initdata = {
-+	.xres		= VIDEOWIDTH,
-+	.yres		= VIDEOHEIGHT,
-+	.xres_virtual	= VIDEOWIDTH,
-+	.yres_virtual	= VIDEOHEIGHT,
-+	.bits_per_pixel	= VIDEODEPTH,
-+	.red		= { 0, 1, 0 },
-+	.green		= { 0, 1, 0 },
-+	.blue		= { 0, 1, 0 },
-+	.activate	= FB_ACTIVATE_NOW,
-+	.pixclock	= 20000,
-+	.vmode		= FB_VMODE_NONINTERLACED,
-+};
-+
-+static struct fb_fix_screeninfo s1d15605_fix __initdata = {
-+	.id		= "s1d15605",
-+	.type		= FB_TYPE_PACKED_PIXELS,
-+	.visual		= FB_VISUAL_MONO10,
-+	.xpanstep	= 0,
-+	.ypanstep	= 0,
-+	.ywrapstep	= 0,
-+	.accel		= FB_ACCEL_NONE,
-+};
-+
-+struct s1d15605fb_info {
-+	struct fb_info		*info;
-+	char			*mmio;
-+	unsigned long		reset_pin;
-+	struct platform_device	*pdev;
-+};
-+
-+/*
-+ * LCD device interface
-+ */
-+#define	RESET_DISPLAY		0xE2
-+#define	LCD_BIAS_1_9		0xA2
-+#define	ADC_SELECT_REVERSE	0xA1
-+#define	COMMON_OUTPUT_NORMAL	0xC0
-+#define	V5_RESISTOR_RATIO	0x26
-+#define	ELECTRONIC_VOLUME_SET	0x81
-+#define	ELECTRONIC_VOLUME_INIT	0x20
-+#define	POWER_CONTROL_SET	0x28
-+#define	VOLTAGE_REGULATOR	0x02
-+#define	VOLTAGE_FOLLOWER	0x01
-+#define	BOOSTER_CIRCUIT		0x04
-+#define	DISPLAY_ON		0xAF
-+#define	START_LINE_SET		0x40
-+#define	PAGE_ADDRESS_SET	0xB0
-+#define	COLUMN_ADDRESS_HIGH	0x10
-+#define	COLUMN_ADDRESS_LOW	0x00
-+#define	RESISTOR_RATIO_START	0x20
-+
-+#define	NUM_OF_PAGES		8
-+#define	NUM_OF_COLUMNS		128
-+
-+#define	WRITE_COMMAND(x)	__raw_writeb((x), (sinfo)->mmio)
-+#define	READ_COMMAND		__raw_readb((sinfo)->mmio)
-+#define	WRITE_DATA(x)		__raw_writeb((x), (sinfo)->mmio + (0x10000))
-+#define	READ_DATA		__raw_readb((sinfo)->mmio + (0x10000))
-+
-+
-+/*
-+ *	s1d15605fb_resize_framebuffer
-+ *
-+ *	Free allocated space if different.  Allocate on new of changed.
-+ *	Returns -ENOMEM if the new framebuffer can not be allocated,
-+ *	zero on success.
-+ */
-+static int s1d15605fb_resize_framebuffer(struct s1d15605fb_info *sinfo)
-+{
-+	struct fb_info			*info = sinfo->info;
-+	struct fb_fix_screeninfo	*fix = &info->fix;
-+	struct fb_var_screeninfo	*var = &info->var;
-+	unsigned int			new_size;
-+	void				*new_vaddr;
-+
-+	new_size = ((var->xres_virtual * var->yres_virtual * var->bits_per_pixel) / 8);
-+
-+	MSG("%s: x (%d) y (%d) bpp (%d): new size 0x%08x\n", __FUNCTION__,
-+		var->xres_virtual, var->yres_virtual, var->bits_per_pixel, new_size);
-+
-+	if (new_size == fix->smem_len)
-+		return 0;
-+
-+	if (fix->smem_len) {
-+		kfree(info->screen_base);
-+	}
-+
-+	new_vaddr = kmalloc(new_size, GFP_KERNEL);
-+
-+	if (!new_vaddr) {
-+		fix->smem_len = 0;
-+		return -ENOMEM;
-+	}
-+
-+	info->screen_base = new_vaddr;
-+	fix->smem_start = (unsigned)new_vaddr;
-+	fix->smem_len = new_size;
-+	fix->line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
-+
-+	dev_info(info->device,
-+		"%luKiB frame buffer at %08lx (mapped at %p)\n",
-+		(unsigned long)info->fix.smem_len / 1024,
-+		(unsigned long)info->fix.smem_start,
-+		info->screen_base);
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * The s1d15605 seems to be divided into eight 128 pixel wide pages (from top to
-+ * bottom) each page seems to be eight pixels high, where these eight pixels are
-+ * one byte
-+ */
-+static void s1d15605_update(struct fb_info *info)
-+{
-+	struct s1d15605fb_info	*sinfo = info->par;
-+	int			page, i, row, colmask;
-+	u8			retVal, *rowPtr;
-+
-+	WRITE_COMMAND(START_LINE_SET);
-+	for (page = 0; page < NUM_OF_PAGES; ++page) {
-+		WRITE_COMMAND(PAGE_ADDRESS_SET + page);
-+		WRITE_COMMAND(COLUMN_ADDRESS_HIGH);
-+		WRITE_COMMAND(COLUMN_ADDRESS_LOW);
-+
-+		for (i = 0; i < NUM_OF_COLUMNS; ++i)
-+		{
-+			/* point of opportunity: optimization */
-+			colmask = (1 << (i & 0x7));
-+			rowPtr = (u8*)(info->screen_base);
-+			rowPtr += (VIDEOWIDTH_BYTES * 8 * page);
-+			rowPtr += (i >> 3);
-+			retVal = 0;
-+			for (row = 0; row < 8; ++row)
-+			{
-+				retVal = (retVal >> 1) | (((*rowPtr) & colmask) ? 0x80 : 0);
-+				rowPtr += VIDEOWIDTH_BYTES;
-+			}
-+			WRITE_DATA(retVal);
-+		}
-+	}
-+
-+	WRITE_COMMAND(DISPLAY_ON);
-+}
-+
-+
-+/*
-+ * Setting the video mode has been split into two parts.
-+ * First part, xxxfb_check_var, must not write anything
-+ * to hardware, it should only verify and adjust var.
-+ * This means it doesn't alter par but it does use hardware
-+ * data from it to check this var.
-+ */
-+static int s1d15605_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
-+{
-+	/*
-+	 * Some very basic checks
-+	 */
-+	if (!var->xres)
-+		var->xres = 1;
-+	if (!var->yres)
-+		var->yres = 1;
-+	if (var->xres > var->xres_virtual)
-+		var->xres_virtual = var->xres;
-+	if (var->yres > var->yres_virtual)
-+		var->yres_virtual = var->yres;
-+
-+	if(var->bits_per_pixel > VIDEODEPTH)
-+		return -EINVAL;
-+
-+	/*
-+	 * Memory limit
-+	 */
-+	if (((var->yres_virtual * var->bits_per_pixel * var->yres_virtual) >> 3) >
-+			ACTUALVIDEOMEMSIZE)
-+		return -ENOMEM;
-+
-+	/*
-+	 * Now that we checked it we alter var. The reason being is that the video
-+	 * mode passed in might not work but slight changes to it might make it
-+	 * work. This way we let the user know what is acceptable.
-+	 */
-+	switch (var->bits_per_pixel) {
-+	case 1:
-+		var->red.offset = var->green.offset = var->blue.offset = 0;
-+		var->red.length = var->green.length = var->blue.length
-+			= var->bits_per_pixel;
-+		break;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	var->xoffset = var->yoffset = 0;
-+	var->red.msb_right = var->green.msb_right = var->blue.msb_right =
-+		var->transp.msb_right = 0;
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * This routine actually sets the video mode. It's in here where we
-+ * the hardware state info->par and fix which can be affected by the
-+ * change in par. For this driver it doesn't do much.
-+ */
-+static int s1d15605_set_par(struct fb_info *info)
-+{
-+	int	ret;
-+
-+	MSG("%s:\n", __func__);
-+	MSG("  * resolution: %ux%u (%ux%u virtual)\n",
-+		 info->var.xres, info->var.yres,
-+		 info->var.xres_virtual, info->var.yres_virtual);
-+
-+	ret = s1d15605fb_resize_framebuffer(info->par);
-+
-+	info->fix.visual = FB_VISUAL_MONO10;
-+	return ret;
-+}
-+
-+
-+/*
-+ * Set a single color register. The values supplied are already
-+ * rounded down to the hardware's capabilities (according to the
-+ * entries in the var structure). Return != 0 for invalid regno.
-+ */
-+static int s1d15605_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+			u_int transp, struct fb_info *info)
-+{
-+	if (regno > 1)	/* no. of hw registers - we only do mono now */
-+		return 1;
-+
-+	return 0;
-+}
-+
-+
-+/*
-+ * Currently, the routine will simply shut-off the backlight and prevent
-+ * updates/refreshes.  Modify according to application.
-+ *
-+ * 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off
-+ */
-+static int s1d15605_blank(int blank, struct fb_info *info)
-+{
-+#ifdef CONFIG_PMAC_BACKLIGHT
-+	if (blank)
-+		pmac_backlight->props.power = FB_BLANK_POWERDOWN;
-+	else
-+		pmac_backlight->props.power = FB_BLANK_UNBLANK;
-+	backlight_update_status(pmac_backlight);
-+#endif
-+	return 1;
-+}
-+
-+
-+/*
-+ * Pan or Wrap the Display
-+ *
-+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
-+ */
-+/*
-+static int s1d15605_pan_display(struct fb_var_screeninfo *var,
-+			struct fb_info *info)
-+{
-+	if (var->vmode & FB_VMODE_YWRAP) {
-+		if (var->yoffset < 0
-+		    || var->yoffset >= info->var.yres_virtual
-+		    || var->xoffset)
-+			return -EINVAL;
-+	} else {
-+		if (var->xoffset + var->xres > info->var.xres_virtual ||
-+		    var->yoffset + var->yres > info->var.yres_virtual)
-+			return -EINVAL;
-+	}
-+	info->var.xoffset = var->xoffset;
-+	info->var.yoffset = var->yoffset;
-+	if (var->vmode & FB_VMODE_YWRAP)
-+		info->var.vmode |= FB_VMODE_YWRAP;
-+	else
-+		info->var.vmode &= ~FB_VMODE_YWRAP;
-+	return 0;
-+}
-+*/
-+
-+
-+static void s1d15605_copyarea(struct fb_info *info, const struct fb_copyarea *region)
-+{
-+	cfb_copyarea(info, region);
-+	s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_fillrect (struct fb_info *info, const struct fb_fillrect *rect)
-+{
-+	cfb_fillrect(info, rect);
-+	s1d15605_update(info);
-+}
-+
-+
-+static void s1d15605_imageblit(struct fb_info *p, const struct fb_image *image)
-+{
-+	cfb_imageblit(p, image);
-+	s1d15605_update(p);
-+}
-+
-+
-+/*
-+ * Write the users data to our framebuffer, and then trigger a psuedo DMA
-+ */
-+static ssize_t s1d15605_write(struct file *file, const char *buf,
-+			size_t count, loff_t *ppos)
-+{
-+	unsigned long p = *ppos;
-+	struct inode *inode = file->f_dentry->d_inode;
-+	int fbidx = iminor(inode);
-+	struct fb_info *info = registered_fb[fbidx];
-+	int err;
-+
-+	if (p > info->fix.smem_len)
-+		return -ENOSPC;
-+	if (count >= info->fix.smem_len)
-+		count = info->fix.smem_len;
-+	err = 0;
-+	if (count + p > info->fix.smem_len) {
-+		count = info->fix.smem_len - p;
-+		err = -ENOSPC;
-+	}
-+	if (count) {
-+		char *base_addr;
-+
-+		base_addr = info->screen_base;
-+		count -= copy_from_user(base_addr+p, buf, count);
-+		*ppos += count;
-+		err = -EFAULT;
-+	}
-+
-+	s1d15605_update(info);
-+
-+	if (count)
-+		return count;
-+
-+	return err;
-+}
-+
-+#ifdef	USE_PRIVATE_VMA_FXS
-+static void s1d15605_vma_open(struct vm_area_struct *vma)
-+{
-+	// FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static void s1d15605_vma_close(struct vm_area_struct *vma)
-+{
-+	// FIXME - store stats in the device data via vm_private_data
-+}
-+
-+
-+static struct page *s1d15605_vma_nopage(struct vm_area_struct *vma,
-+				unsigned long address, int *type)
-+{
-+	struct page *page;
-+	struct fb_info *info = vma->vm_private_data;
-+
-+	page = virt_to_page(info->screen_base);
-+	get_page(page);
-+
-+	// FIXME - now someone has a link to our page, start periodically blitting
-+	// latest updates to the actual device.
-+
-+	return page;
-+}
-+
-+
-+static struct vm_operations_struct s1d15605_vm_ops = {
-+	.open	= s1d15605_vma_open,
-+	.close	= s1d15605_vma_close,
-+	.nopage	= s1d15605_vma_nopage
-+};
-+
-+
-+/* We don't do much here - because we have special vm_ops */
-+static int s1d15605_mmap(struct fb_info *info, struct vm_area_struct *vma)
-+{
-+	vma->vm_ops = &s1d15605_vm_ops;
-+	vma->vm_flags |= VM_RESERVED;
-+	vma->vm_private_data = info;
-+	s1d15605_vma_open(vma);
-+
-+	return 0;
-+}
-+#endif /* USE_PRIVATE_VMA_FXS */
-+
-+
-+static struct fb_ops s1d15605fb_ops = {
-+	.owner		= THIS_MODULE,
-+	.fb_check_var	= s1d15605_check_var,
-+	.fb_set_par	= s1d15605_set_par,
-+	.fb_setcolreg	= s1d15605_setcolreg,
-+	.fb_blank	= s1d15605_blank,
-+//	.fb_pan_display	= s1d15605_pan_display,
-+	.fb_fillrect	= s1d15605_fillrect,
-+	.fb_copyarea	= s1d15605_copyarea,
-+	.fb_imageblit	= s1d15605_imageblit,
-+	.fb_write	= s1d15605_write,
-+#ifdef	USE_PRIVATE_VMA_FXS
-+	.fb_mmap	= s1d15605_mmap,
-+#endif
-+};
-+
-+
-+static void s1d15605_device_init(struct s1d15605fb_info *sinfo) {
-+
-+	char	value;
-+
-+	/* release the reset line by reading the device - proto hardware */
-+	value = READ_COMMAND;
-+	value = READ_COMMAND;
-+
-+#ifdef CONFIG_MACH_KB9200
-+	/* new boards have dedicated reset line */
-+	gpio_set_value(sinfo->reset_pin, 1);
-+#endif
-+
-+	/* initialize the device within 5ms */
-+	WRITE_COMMAND(RESET_DISPLAY);
-+	WRITE_COMMAND(LCD_BIAS_1_9);
-+	WRITE_COMMAND(ADC_SELECT_REVERSE);
-+	WRITE_COMMAND(COMMON_OUTPUT_NORMAL);
-+	WRITE_COMMAND(V5_RESISTOR_RATIO);
-+	WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+	WRITE_COMMAND(ELECTRONIC_VOLUME_INIT);
-+	WRITE_COMMAND(POWER_CONTROL_SET | VOLTAGE_REGULATOR | VOLTAGE_FOLLOWER | BOOSTER_CIRCUIT);
-+	WRITE_COMMAND(DISPLAY_ON);
-+
-+	WRITE_COMMAND(RESISTOR_RATIO_START + 4);
-+	WRITE_COMMAND(ELECTRONIC_VOLUME_SET);
-+	WRITE_COMMAND(0x33);
-+}
-+
-+
-+static int s1d15605fb_probe(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fb_info *info;
-+	struct s1d15605fb_info *sinfo;
-+	int ret;
-+
-+	MSG("%s\n", __func__);
-+
-+	if (!(info = framebuffer_alloc(sizeof(struct s1d15605fb_info), dev))) {
-+		dev_err(dev, "Cannot allocate framebuffer struct\n");
-+		return -ENOMEM;
-+	}
-+
-+	sinfo = info->par;
-+	sinfo->info = info;
-+	sinfo->pdev = pdev;
-+
-+	if (pdev->num_resources < 2) {
-+		dev_err(dev, "Resources unusable\n");
-+		ret = -ENODEV;
-+		goto free_info;
-+	}
-+
-+	info->fbops = &s1d15605fb_ops;
-+	strcpy(info->fix.id, pdev->name);
-+
-+	info->fix.mmio_start = pdev->resource[0].start;
-+	info->fix.mmio_len = pdev->resource[0].end - pdev->resource[0].start + 1;
-+	sinfo->reset_pin = pdev->resource[1].start;
-+
-+	ret = s1d15605fb_resize_framebuffer(sinfo);
-+	if (ret < 0) {
-+		dev_err(dev, "Cannot resize framebuffer: %d\n", ret);
-+		goto free_fb;
-+	}
-+
-+	if (!request_mem_region(info->fix.mmio_start,
-+				info->fix.mmio_len, pdev->name)) {
-+		ret = -EBUSY;
-+		goto free_fb;
-+	}
-+
-+	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+	if (!sinfo->mmio) {
-+		dev_err(dev, "Cannot map LCD memory region\n");
-+		goto release_mem;
-+	}
-+
-+	s1d15605_device_init(sinfo);
-+
-+	ret = fb_find_mode(&info->var, info, NULL, NULL, 0, NULL, 1);
-+
-+	if (!ret || (ret == 4))
-+		info->var = s1d15605_default;
-+
-+	info->fix = s1d15605_fix;
-+	info->flags = FBINFO_FLAG_DEFAULT |
-+/*		FBINFO_HWACCEL_YPAN | */
-+		FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_COPYAREA;
-+
-+	ret = register_framebuffer(info);
-+	if (ret < 0) {
-+		dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
-+		goto unmap_mmio;
-+	}
-+
-+	dev_set_drvdata(dev, info);
-+
-+	memset(info->screen_base, 0, info->fix.smem_len);
-+	info->var.activate |= FB_ACTIVATE_NOW;
-+	ret = fb_set_var(info, &info->var);
-+	if (ret) {
-+		dev_warn(dev, "Unable to set display parameters\n");
-+	}
-+
-+	info->var.activate &= ~(FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW);
-+
-+	dev_dbg(dev, "%s SUCCESS\n", __func__);
-+
-+	dev_info(dev, "Driver $Revision: 1.1 $\n");
-+
-+	return 0;
-+
-+unmap_mmio:
-+	iounmap(sinfo->mmio);
-+release_mem:
-+	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+	kfree(info->screen_base);
-+
-+free_info:
-+	framebuffer_release(info);
-+
-+	dev_dbg(dev, "%s FAILED\n", __func__);
-+	return ret;
-+}
-+
-+
-+static int s1d15605fb_remove(struct platform_device *pdev)
-+{
-+	struct device *dev = &pdev->dev;
-+	struct fb_info *info = dev_get_drvdata(dev);
-+	struct s1d15605fb_info *sinfo = info->par;
-+
-+	if (!sinfo)
-+		return 0;
-+
-+	unregister_framebuffer(info);
-+
-+	iounmap(sinfo->mmio);
-+	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+
-+	kfree(info->screen_base);
-+
-+	dev_set_drvdata(dev, NULL);
-+	framebuffer_release(info);
-+	return 0;
-+}
-+
-+
-+static struct platform_driver s1d15605fb_driver = {
-+	.probe		= s1d15605fb_probe,
-+	.remove		= s1d15605fb_remove,
-+	.driver		= {
-+		.name	= "s1d15605fb",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+
-+static int __init s1d15605fb_init(void)
-+{
-+	return platform_driver_register(&s1d15605fb_driver);
-+}
-+
-+
-+static void __exit s1d15605fb_exit(void)
-+{
-+	platform_driver_unregister(&s1d15605fb_driver);
-+}
-+
-+
-+module_init(s1d15605fb_init);
-+module_exit(s1d15605fb_exit);
-+
-+
-+MODULE_AUTHOR("KwikByte");
-+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
-+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_adc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_adc.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_adc.h	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_adc.h	Tue May  8 12:13:31 2007
-@@ -0,0 +1,61 @@
-+/*
-+ * include/asm-arm/arch-at91/at91_adc.h
-+ *
-+ * Copyright (C) SAN People
-+ *
-+ * Analog-to-Digital Converter (ADC) registers.
-+ * Based on AT91SAM9260 datasheet revision D.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#ifndef AT91_ADC_H
-+#define AT91_ADC_H
-+
-+#define AT91_ADC_CR		0x00		/* Control Register */
-+#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
-+#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
-+
-+#define AT91_ADC_MR		0x04		/* Mode Register */
-+#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
-+#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
-+#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
-+#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
-+#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
-+#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
-+#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
-+#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
-+#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
-+#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
-+#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
-+#define			AT91_ADC_STARTUP_(x)	((x) << 16)
-+#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
-+#define			AT91_ADC_SHTIM_(x)	((x) << 24)
-+
-+#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
-+#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
-+#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
-+#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
-+
-+#define AT91_ADC_SR		0x1C		/* Status Register */
-+#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
-+#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
-+#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
-+#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
-+#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
-+#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
-+
-+#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
-+#define		AT91_ADC_LDATA		(0x3ff)
-+
-+#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
-+#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
-+#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
-+
-+#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4)	/* Channel Data Register N */
-+#define		AT91_ADC_DATA		(0x3ff)
-+
-+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_mci.h linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_mci.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_mci.h	Tue May  8 12:13:31 2007
-@@ -26,6 +26,9 @@
- #define AT91_MCI_MR		0x04		/* Mode Register */
- #define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
- #define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
-+#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
-+#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
-+#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
- #define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
- #define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
- #define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91_pmc.h linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91_pmc.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91_pmc.h	Fri May 11 16:45:00 2007
-@@ -37,7 +37,9 @@
- #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
- #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
- 
--#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
-+#define AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL only] */
-+
-+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
- #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
- #define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
- #define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91rm9200.h linux-2.6-stable/include/asm-arm/arch-at91/at91rm9200.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91rm9200.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91rm9200.h	Tue May  8 12:56:33 2007
-@@ -107,185 +107,4 @@
- #define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
- 
- 
--#if 0
--/*
-- * PIO pin definitions (peripheral A/B multiplexing).
-- */
--#define AT91_PA0_MISO		(1 <<  0)	/* A: SPI Master-In Slave-Out */
--#define AT91_PA0_PCK3		(1 <<  0)	/* B: PMC Programmable Clock Output 3 */
--#define AT91_PA1_MOSI		(1 <<  1)	/* A: SPI Master-Out Slave-In */
--#define AT91_PA1_PCK0		(1 <<  1)	/* B: PMC Programmable Clock Output 0 */
--#define AT91_PA2_SPCK		(1 <<  2)	/* A: SPI Serial Clock */
--#define AT91_PA2_IRQ4		(1 <<  2)	/* B: External Interrupt 4 */
--#define AT91_PA3_NPCS0		(1 <<  3)	/* A: SPI Peripheral Chip Select 0 */
--#define AT91_PA3_IRQ5		(1 <<  3)	/* B: External Interrupt 5 */
--#define AT91_PA4_NPCS1		(1 <<  4)	/* A: SPI Peripheral Chip Select 1 */
--#define AT91_PA4_PCK1		(1 <<  4)	/* B: PMC Programmable Clock Output 1 */
--#define AT91_PA5_NPCS2		(1 <<  5)	/* A: SPI Peripheral Chip Select 2 */
--#define AT91_PA5_TXD3		(1 <<  5)	/* B: USART Transmit Data 3 */
--#define AT91_PA6_NPCS3		(1 <<  6)	/* A: SPI Peripheral Chip Select 3 */
--#define AT91_PA6_RXD3		(1 <<  6)	/* B: USART Receive Data 3 */
--#define AT91_PA7_ETXCK_EREFCK	(1 <<  7)	/* A: Ethernet Reference Clock / Transmit Clock */
--#define AT91_PA7_PCK2		(1 <<  7)	/* B: PMC Programmable Clock Output 2 */
--#define AT91_PA8_ETXEN		(1 <<  8)	/* A: Ethernet Transmit Enable */
--#define AT91_PA8_MCCDB		(1 <<  8)	/* B: MMC Multimedia Card B Command */
--#define AT91_PA9_ETX0		(1 <<  9)	/* A: Ethernet Transmit Data 0 */
--#define AT91_PA9_MCDB0		(1 <<  9)	/* B: MMC Multimedia Card B Data 0 */
--#define AT91_PA10_ETX1		(1 << 10)	/* A: Ethernet Transmit Data 1 */
--#define AT91_PA10_MCDB1		(1 << 10)	/* B: MMC Multimedia Card B Data 1 */
--#define AT91_PA11_ECRS_ECRSDV	(1 << 11)	/* A: Ethernet Carrier Sense / Data Valid */
--#define AT91_PA11_MCDB2		(1 << 11)	/* B: MMC Multimedia Card B Data 2 */
--#define AT91_PA12_ERX0		(1 << 12)	/* A: Ethernet Receive Data 0 */
--#define AT91_PA12_MCDB3		(1 << 12)	/* B: MMC Multimedia Card B Data 3 */
--#define AT91_PA13_ERX1		(1 << 13)	/* A: Ethernet Receive Data 1 */
--#define AT91_PA13_TCLK0		(1 << 13)	/* B: TC External Clock Input 0 */
--#define AT91_PA14_ERXER		(1 << 14)	/* A: Ethernet Receive Error */
--#define AT91_PA14_TCLK1		(1 << 14)	/* B: TC External Clock Input 1 */
--#define AT91_PA15_EMDC		(1 << 15)	/* A: Ethernet Management Data Clock */
--#define AT91_PA15_TCLK2		(1 << 15)	/* B: TC External Clock Input 2 */
--#define AT91_PA16_EMDIO		(1 << 16)	/* A: Ethernet Management Data I/O */
--#define AT91_PA16_IRQ6		(1 << 16)	/* B: External Interrupt 6 */
--#define AT91_PA17_TXD0		(1 << 17)	/* A: USART Transmit Data 0 */
--#define AT91_PA17_TIOA0		(1 << 17)	/* B: TC I/O Line A 0 */
--#define AT91_PA18_RXD0		(1 << 18)	/* A: USART Receive Data 0 */
--#define AT91_PA18_TIOB0		(1 << 18)	/* B: TC I/O Line B 0 */
--#define AT91_PA19_SCK0		(1 << 19)	/* A: USART Serial Clock 0 */
--#define AT91_PA19_TIOA1		(1 << 19)	/* B: TC I/O Line A 1 */
--#define AT91_PA20_CTS0		(1 << 20)	/* A: USART Clear To Send 0 */
--#define AT91_PA20_TIOB1		(1 << 20)	/* B: TC I/O Line B 1 */
--#define AT91_PA21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
--#define AT91_PA21_TIOA2		(1 << 21)	/* B: TC I/O Line A 2 */
--#define AT91_PA22_RXD2		(1 << 22)	/* A: USART Receive Data 2 */
--#define AT91_PA22_TIOB2		(1 << 22)	/* B: TC I/O Line B 2 */
--#define AT91_PA23_TXD2		(1 << 23)	/* A: USART Transmit Data 2 */
--#define AT91_PA23_IRQ3		(1 << 23)	/* B: External Interrupt 3 */
--#define AT91_PA24_SCK2		(1 << 24)	/* A: USART Serial Clock 2 */
--#define AT91_PA24_PCK1		(1 << 24)	/* B: PMC Programmable Clock Output 1 */
--#define AT91_PA25_TWD		(1 << 25)	/* A: TWI Two-wire Serial Data */
--#define AT91_PA25_IRQ2		(1 << 25)	/* B: External Interrupt 2 */
--#define AT91_PA26_TWCK		(1 << 26)	/* A: TWI Two-wire Serial Clock */
--#define AT91_PA26_IRQ1		(1 << 26)	/* B: External Interrupt 1 */
--#define AT91_PA27_MCCK		(1 << 27)	/* A: MMC Multimedia Card Clock */
--#define AT91_PA27_TCLK3		(1 << 27)	/* B: TC External Clock Input 3 */
--#define AT91_PA28_MCCDA		(1 << 28)	/* A: MMC Multimedia Card A Command */
--#define AT91_PA28_TCLK4		(1 << 28)	/* B: TC External Clock Input 4 */
--#define AT91_PA29_MCDA0		(1 << 29)	/* A: MMC Multimedia Card A Data 0 */
--#define AT91_PA29_TCLK5		(1 << 29)	/* B: TC External Clock Input 5 */
--#define AT91_PA30_DRXD		(1 << 30)	/* A: DBGU Receive Data */
--#define AT91_PA30_CTS2		(1 << 30)	/* B: USART Clear To Send 2 */
--#define AT91_PA31_DTXD		(1 << 31)	/* A: DBGU Transmit Data */
--#define AT91_PA31_RTS2		(1 << 31)	/* B: USART Ready To Send 2 */
--
--#define AT91_PB0_TF0		(1 <<  0)	/* A: SSC Transmit Frame Sync 0 */
--#define AT91_PB0_RTS3		(1 <<  0)	/* B: USART Ready To Send 3 */
--#define AT91_PB1_TK0		(1 <<  1)	/* A: SSC Transmit Clock 0 */
--#define AT91_PB1_CTS3		(1 <<  1)	/* B: USART Clear To Send 3 */
--#define AT91_PB2_TD0		(1 <<  2)	/* A: SSC Transmit Data 0 */
--#define AT91_PB2_SCK3		(1 <<  2)	/* B: USART Serial Clock 3 */
--#define AT91_PB3_RD0		(1 <<  3)	/* A: SSC Receive Data 0 */
--#define AT91_PB3_MCDA1		(1 <<  3)	/* B: MMC Multimedia Card A Data 1 */
--#define AT91_PB4_RK0		(1 <<  4)	/* A: SSC Receive Clock 0 */
--#define AT91_PB4_MCDA2		(1 <<  4)	/* B: MMC Multimedia Card A Data 2 */
--#define AT91_PB5_RF0		(1 <<  5)	/* A: SSC Receive Frame Sync 0 */
--#define AT91_PB5_MCDA3		(1 <<  5)	/* B: MMC Multimedia Card A Data 3 */
--#define AT91_PB6_TF1		(1 <<  6)	/* A: SSC Transmit Frame Sync 1 */
--#define AT91_PB6_TIOA3		(1 <<  6)	/* B: TC I/O Line A 3 */
--#define AT91_PB7_TK1		(1 <<  7)	/* A: SSC Transmit Clock 1 */
--#define AT91_PB7_TIOB3		(1 <<  7)	/* B: TC I/O Line B 3 */
--#define AT91_PB8_TD1		(1 <<  8)	/* A: SSC Transmit Data 1 */
--#define AT91_PB8_TIOA4		(1 <<  8)	/* B: TC I/O Line A 4 */
--#define AT91_PB9_RD1		(1 <<  9)	/* A: SSC Receive Data 1 */
--#define AT91_PB9_TIOB4		(1 <<  9)	/* B: TC I/O Line B 4 */
--#define AT91_PB10_RK1		(1 << 10)	/* A: SSC Receive Clock 1 */
--#define AT91_PB10_TIOA5		(1 << 10)	/* B: TC I/O Line A 5 */
--#define AT91_PB11_RF1		(1 << 11)	/* A: SSC Receive Frame Sync 1 */
--#define AT91_PB11_TIOB5		(1 << 11)	/* B: TC I/O Line B 5 */
--#define AT91_PB12_TF2		(1 << 12)	/* A: SSC Transmit Frame Sync 2 */
--#define AT91_PB12_ETX2		(1 << 12)	/* B: Ethernet Transmit Data 2 */
--#define AT91_PB13_TK2		(1 << 13)	/* A: SSC Transmit Clock 3 */
--#define AT91_PB13_ETX3		(1 << 13)	/* B: Ethernet Transmit Data 3 */
--#define AT91_PB14_TD2		(1 << 14)	/* A: SSC Transmit Data 2 */
--#define AT91_PB14_ETXER		(1 << 14)	/* B: Ethernet Transmit Coding Error */
--#define AT91_PB15_RD2		(1 << 15)	/* A: SSC Receive Data 2 */
--#define AT91_PB15_ERX2		(1 << 15)	/* B: Ethernet Receive Data 2 */
--#define AT91_PB16_RK2		(1 << 16)	/* A: SSC Receive Clock 2 */
--#define AT91_PB16_ERX3		(1 << 16)	/* B: Ethernet Receive Data 3 */
--#define AT91_PB17_RF2		(1 << 17)	/* A: SSC Receive Frame Sync 2 */
--#define AT91_PB17_ERXDV		(1 << 17)	/* B: Ethernet Receive Data Valid */
--#define AT91_PB18_RI1		(1 << 18)	/* A: USART Ring Indicator 1 */
--#define AT91_PB18_ECOL		(1 << 18)	/* B: Ethernet Collision Detected */
--#define AT91_PB19_DTR1		(1 << 19)	/* A: USART Data Terminal Ready 1 */
--#define AT91_PB19_ERXCK		(1 << 19)	/* B: Ethernet Receive Clock */
--#define AT91_PB20_TXD1		(1 << 20)	/* A: USART Transmit Data 1 */
--#define AT91_PB21_RXD1		(1 << 21)	/* A: USART Receive Data 1 */
--#define AT91_PB22_SCK1		(1 << 22)	/* A: USART Serial Clock 1 */
--#define AT91_PB23_DCD1		(1 << 23)	/* A: USART Data Carrier Detect 1 */
--#define AT91_PB24_CTS1		(1 << 24)	/* A: USART Clear To Send 1 */
--#define AT91_PB25_DSR1		(1 << 25)	/* A: USART Data Set Ready 1 */
--#define AT91_PB25_EF100		(1 << 25)	/* B: Ethernet Force 100 Mbit */
--#define AT91_PB26_RTS1		(1 << 26)	/* A: USART Ready To Send 1 */
--#define AT91_PB27_PCK0		(1 << 27)	/* B: PMC Programmable Clock Output 0 */
--#define AT91_PB28_FIQ		(1 << 28)	/* A: Fast Interrupt */
--#define AT91_PB29_IRQ0		(1 << 29)	/* A: External Interrupt 0 */
--
--#define AT91_PC0_BFCK		(1 <<  0)	/* A: Burst Flash Clock */
--#define AT91_PC1_BFRDY_SMOE	(1 <<  1)	/* A: Burst Flash Ready / SmartMedia Output Enable */
--#define AT91_PC2_BFAVD		(1 <<  2)	/* A: Burst Flash Address Valid */
--#define AT91_PC3_BFBAA_SMWE	(1 <<  3)	/* A: Burst Flash Address Advance / SmartMedia Write Enable */
--#define AT91_PC4_BFOE		(1 <<  4)	/* A: Burst Flash Output Enable */
--#define AT91_PC5_BFWE		(1 <<  5)	/* A: Burst Flash Write Enable */
--#define AT91_PC6_NWAIT		(1 <<  6)	/* A: SMC Wait Signal */
--#define AT91_PC7_A23		(1 <<  7)	/* A: Address Bus 23 */
--#define AT91_PC8_A24		(1 <<  8)	/* A: Address Bus 24 */
--#define AT91_PC9_A25_CFRNW	(1 <<  9)	/* A: Address Bus 25 / Compact Flash Read Not Write */
--#define AT91_PC10_NCS4_CFCS	(1 << 10)	/* A: SMC Chip Select 4 / Compact Flash Chip Select */
--#define AT91_PC11_NCS5_CFCE1	(1 << 11)	/* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
--#define AT91_PC12_NCS6_CFCE2	(1 << 12)	/* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
--#define AT91_PC13_NCS7		(1 << 13)	/* A: Chip Select 7 */
--
--#define AT91_PD0_ETX0		(1 <<  0)	/* A: Ethernet Transmit Data 0 */
--#define AT91_PD1_ETX1		(1 <<  1)	/* A: Ethernet Transmit Data 1 */
--#define AT91_PD2_ETX2		(1 <<  2)	/* A: Ethernet Transmit Data 2 */
--#define AT91_PD3_ETX3		(1 <<  3)	/* A: Ethernet Transmit Data 3 */
--#define AT91_PD4_ETXEN		(1 <<  4)	/* A: Ethernet Transmit Enable */
--#define AT91_PD5_ETXER		(1 <<  5)	/* A: Ethernet Transmit Coding Error */
--#define AT91_PD6_DTXD		(1 <<  6)	/* A: DBGU Transmit Data */
--#define AT91_PD7_PCK0		(1 <<  7)	/* A: PMC Programmable Clock Output 0 */
--#define AT91_PD7_TSYNC		(1 <<  7)	/* B: ETM Trace Synchronization Signal */
--#define AT91_PD8_PCK1		(1 <<  8)	/* A: PMC Programmable Clock Output 1 */
--#define AT91_PD8_TCLK		(1 <<  8)	/* B: ETM Trace Clock */
--#define AT91_PD9_PCK2		(1 <<  9)	/* A: PMC Programmable Clock Output 2 */
--#define AT91_PD9_TPS0		(1 <<  9)	/* B: ETM Trace ARM Pipeline Status 0 */
--#define AT91_PD10_PCK3		(1 << 10)	/* A: PMC Programmable Clock Output 3 */
--#define AT91_PD10_TPS1		(1 << 10)	/* B: ETM Trace ARM Pipeline Status 1 */
--#define AT91_PD11_TPS2		(1 << 11)	/* B: ETM Trace ARM Pipeline Status 2 */
--#define AT91_PD12_TPK0		(1 << 12)	/* B: ETM Trace Packet Port 0 */
--#define AT91_PD13_TPK1		(1 << 13)	/* B: ETM Trace Packet Port 1 */
--#define AT91_PD14_TPK2		(1 << 14)	/* B: ETM Trace Packet Port 2 */
--#define AT91_PD15_TD0		(1 << 15)	/* A: SSC Transmit Data 0 */
--#define AT91_PD15_TPK3		(1 << 15)	/* B: ETM Trace Packet Port 3 */
--#define AT91_PD16_TD1		(1 << 16)	/* A: SSC Transmit Data 1 */
--#define AT91_PD16_TPK4		(1 << 16)	/* B: ETM Trace Packet Port 4 */
--#define AT91_PD17_TD2		(1 << 17)	/* A: SSC Transmit Data 2 */
--#define AT91_PD17_TPK5		(1 << 17)	/* B: ETM Trace Packet Port 5 */
--#define AT91_PD18_NPCS1		(1 << 18)	/* A: SPI Peripheral Chip Select 1 */
--#define AT91_PD18_TPK6		(1 << 18)	/* B: ETM Trace Packet Port 6 */
--#define AT91_PD19_NPCS2		(1 << 19)	/* A: SPI Peripheral Chip Select 2 */
--#define AT91_PD19_TPK7		(1 << 19)	/* B: ETM Trace Packet Port 7 */
--#define AT91_PD20_NPCS3		(1 << 20)	/* A: SPI Peripheral Chip Select 3 */
--#define AT91_PD20_TPK8		(1 << 20)	/* B: ETM Trace Packet Port 8 */
--#define AT91_PD21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
--#define AT91_PD21_TPK9		(1 << 21)	/* B: ETM Trace Packet Port 9 */
--#define AT91_PD22_RTS1		(1 << 22)	/* A: USART Ready To Send 1 */
--#define AT91_PD22_TPK10		(1 << 22)	/* B: ETM Trace Packet Port 10 */
--#define AT91_PD23_RTS2		(1 << 23)	/* A: USART Ready To Send 2 */
--#define AT91_PD23_TPK11		(1 << 23)	/* B: ETM Trace Packet Port 11 */
--#define AT91_PD24_RTS3		(1 << 24)	/* A: USART Ready To Send 3 */
--#define AT91_PD24_TPK12		(1 << 24)	/* B: ETM Trace Packet Port 12 */
--#define AT91_PD25_DTR1		(1 << 25)	/* A: USART Data Terminal Ready 1 */
--#define AT91_PD25_TPK13		(1 << 25)	/* B: ETM Trace Packet Port 13 */
--#define AT91_PD26_TPK14		(1 << 26)	/* B: ETM Trace Packet Port 14 */
--#define AT91_PD27_TPK15		(1 << 27)	/* B: ETM Trace Packet Port 15 */
--#endif
--
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9260.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9260.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260.h	Tue May  8 12:56:33 2007
-@@ -117,13 +117,4 @@
- #define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
- 
- 
--#if 0
--/*
-- * PIO pin definitions (peripheral A/B multiplexing).
-- */
--
--// TODO: Add
--
--#endif
--
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9260_matrix.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9260_matrix.h	Fri May 11 16:20:33 2007
-@@ -67,7 +67,7 @@
- #define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
- #define			AT91_MATRIX_CS4A_SMC		(0 << 4)
- #define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
--#define		AT91_MATRIX_CS5A		(1 << 5 )	/* Chip Select 5 Assignment */
-+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
- #define			AT91_MATRIX_CS5A_SMC		(0 << 5)
- #define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
- #define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9261.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9261.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9261.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9261.h	Tue May  8 12:56:33 2007
-@@ -98,195 +98,4 @@
- #define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
- 
- 
--#if 0
--/*
-- * PIO pin definitions (peripheral A/B multiplexing).
-- */
--#define AT91_PA0_SPI0_MISO	(1 <<  0)	/* A: SPI0 Master In Slave */
--#define AT91_PA0_MCDA0		(1 <<  0)	/* B: Multimedia Card A Data 0 */
--#define AT91_PA1_SPI0_MOSI	(1 <<  1)	/* A: SPI0 Master Out Slave */
--#define AT91_PA1_MCCDA		(1 <<  1)	/* B: Multimedia Card A Command */
--#define AT91_PA2_SPI0_SPCK	(1 <<  2)	/* A: SPI0 Serial Clock */
--#define AT91_PA2_MCCK		(1 <<  2)	/* B: Multimedia Card Clock */
--#define AT91_PA3_SPI0_NPCS0	(1 <<  3)	/* A: SPI0 Peripheral Chip Select 0 */
--#define AT91_PA4_SPI0_NPCS1	(1 <<  4)	/* A: SPI0 Peripheral Chip Select 1 */
--#define AT91_PA4_MCDA1		(1 <<  4)	/* B: Multimedia Card A Data 1 */
--#define AT91_PA5_SPI0_NPCS2	(1 <<  5)	/* A: SPI0 Peripheral Chip Select 2 */
--#define AT91_PA5_MCDA2		(1 <<  5)	/* B: Multimedia Card A Data 2 */
--#define AT91_PA6_SPI0_NPCS3	(1 <<  6)	/* A: SPI0 Peripheral Chip Select 3 */
--#define AT91_PA6_MCDA3		(1 <<  6)	/* B: Multimedia Card A Data 3 */
--#define AT91_PA7_TWD		(1 <<  7)	/* A: TWI Two-wire Serial Data */
--#define AT91_PA7_PCK0		(1 <<  7)	/* B: PMC Programmable clock Output 0 */
--#define AT91_PA8_TWCK		(1 <<  8)	/* A: TWI Two-wire Serial Clock */
--#define AT91_PA8_PCK1		(1 <<  8)	/* B: PMC Programmable clock Output 1 */
--#define AT91_PA9_DRXD		(1 <<  9)	/* A: DBGU Debug Receive Data */
--#define AT91_PA9_PCK2		(1 <<  9)	/* B: PMC Programmable clock Output 2 */
--#define AT91_PA10_DTXD		(1 << 10)	/* A: DBGU Debug Transmit Data */
--#define AT91_PA10_PCK3		(1 << 10)	/* B: PMC Programmable clock Output 3 */
--#define AT91_PA11_TSYNC		(1 << 11)	/* A: Trace Synchronization Signal */
--#define AT91_PA11_SCK1		(1 << 11)	/* B: USART1 Serial Clock */
--#define AT91_PA12_TCLK		(1 << 12)	/* A: Trace Clock */
--#define AT91_PA12_RTS1		(1 << 12)	/* B: USART1 Ready To Send */
--#define AT91_PA13_TPS0		(1 << 13)	/* A: Trace ARM Pipeline Status 0 */
--#define AT91_PA13_CTS1		(1 << 13)	/* B: USART1 Clear To Send */
--#define AT91_PA14_TPS1		(1 << 14)	/* A: Trace ARM Pipeline Status 1 */
--#define AT91_PA14_SCK2		(1 << 14)	/* B: USART2 Serial Clock */
--#define AT91_PA15_TPS2		(1 << 15)	/* A: Trace ARM Pipeline Status 2 */
--#define AT91_PA15_RTS2		(1 << 15)	/* B: USART2 Ready To Send */
--#define AT91_PA16_TPK0		(1 << 16)	/* A: Trace Packet Port 0 */
--#define AT91_PA16_CTS2		(1 << 16)	/* B: USART2 Clear To Send */
--#define AT91_PA17_TPK1		(1 << 17)	/* A: Trace Packet Port 1 */
--#define AT91_PA17_TF1		(1 << 17)	/* B: SSC1 Transmit Frame Sync */
--#define AT91_PA18_TPK2		(1 << 18)	/* A: Trace Packet Port 2 */
--#define AT91_PA18_TK1		(1 << 18)	/* B: SSC1 Transmit Clock */
--#define AT91_PA19_TPK3		(1 << 19)	/* A: Trace Packet Port 3 */
--#define AT91_PA19_TD1		(1 << 19)	/* B: SSC1 Transmit Data */
--#define AT91_PA20_TPK4		(1 << 20)	/* A: Trace Packet Port 4 */
--#define AT91_PA20_RD1		(1 << 20)	/* B: SSC1 Receive Data */
--#define AT91_PA21_TPK5		(1 << 21)	/* A: Trace Packet Port 5 */
--#define AT91_PA21_RK1		(1 << 21)	/* B: SSC1 Receive Clock */
--#define AT91_PA22_TPK6		(1 << 22)	/* A: Trace Packet Port 6 */
--#define AT91_PA22_RF1		(1 << 22)	/* B: SSC1 Receive Frame Sync */
--#define AT91_PA23_TPK7		(1 << 23)	/* A: Trace Packet Port 7 */
--#define AT91_PA23_RTS0		(1 << 23)	/* B: USART0 Ready To Send */
--#define AT91_PA24_TPK8		(1 << 24)	/* A: Trace Packet Port 8 */
--#define AT91_PA24_SPI1_NPCS1	(1 << 24)	/* B: SPI1 Peripheral Chip Select 1 */
--#define AT91_PA25_TPK9		(1 << 25)	/* A: Trace Packet Port 9 */
--#define AT91_PA25_SPI1_NPCS2	(1 << 25)	/* B: SPI1 Peripheral Chip Select 2 */
--#define AT91_PA26_TPK10		(1 << 26)	/* A: Trace Packet Port 10 */
--#define AT91_PA26_SPI1_NPCS3	(1 << 26)	/* B: SPI1 Peripheral Chip Select 3 */
--#define AT91_PA27_TPK11		(1 << 27)	/* A: Trace Packet Port 11 */
--#define AT91_PA27_SPI0_NPCS1	(1 << 27)	/* B: SPI0 Peripheral Chip Select 1 */
--#define AT91_PA28_TPK12		(1 << 28)	/* A: Trace Packet Port 12 */
--#define AT91_PA28_SPI0_NPCS2	(1 << 28)	/* B: SPI0 Peripheral Chip Select 2 */
--#define AT91_PA29_TPK13		(1 << 29)	/* A: Trace Packet Port 13 */
--#define AT91_PA29_SPI0_NPCS3	(1 << 29)	/* B: SPI0 Peripheral Chip Select 3 */
--#define AT91_PA30_TPK14		(1 << 30)	/* A: Trace Packet Port 14 */
--#define AT91_PA30_A23		(1 << 30)	/* B: Address Bus bit 23 */
--#define AT91_PA31_TPK15		(1 << 31)	/* A: Trace Packet Port 15 */
--#define AT91_PA31_A24		(1 << 31)	/* B: Address Bus bit 24 */
--
--#define AT91_PB0_LCDVSYNC	(1 <<  0)	/* A: LCD Vertical Synchronization */
--#define AT91_PB1_LCDHSYNC	(1 <<  1)	/* A: LCD Horizontal Synchronization */
--#define AT91_PB2_LCDDOTCK	(1 <<  2)	/* A: LCD Dot Clock */
--#define AT91_PB2_PCK0		(1 <<  2)	/* B: PMC Programmable clock Output 0 */
--#define AT91_PB3_LCDDEN		(1 <<  3)	/* A: LCD Data Enable */
--#define AT91_PB4_LCDCC		(1 <<  4)	/* A: LCD Contrast Control */
--#define AT91_PB4_LCDD2		(1 <<  4)	/* B: LCD Data Bus Bit 2 */
--#define AT91_PB5_LCDD0		(1 <<  5)	/* A: LCD Data Bus Bit 0 */
--#define AT91_PB5_LCDD3		(1 <<  5)	/* B: LCD Data Bus Bit 3 */
--#define AT91_PB6_LCDD1		(1 <<  6)	/* A: LCD Data Bus Bit 1 */
--#define AT91_PB6_LCDD4		(1 <<  6)	/* B: LCD Data Bus Bit 4 */
--#define AT91_PB7_LCDD2		(1 <<  7)	/* A: LCD Data Bus Bit 2 */
--#define AT91_PB7_LCDD5		(1 <<  7)	/* B: LCD Data Bus Bit 5 */
--#define AT91_PB8_LCDD3		(1 <<  8)	/* A: LCD Data Bus Bit 3 */
--#define AT91_PB8_LCDD6		(1 <<  8)	/* B: LCD Data Bus Bit 6 */
--#define AT91_PB9_LCDD4		(1 <<  9)	/* A: LCD Data Bus Bit 4 */
--#define AT91_PB9_LCDD7		(1 <<  9)	/* B: LCD Data Bus Bit 7 */
--#define AT91_PB10_LCDD5		(1 << 10)	/* A: LCD Data Bus Bit 5 */
--#define AT91_PB10_LCDD10	(1 << 10)	/* B: LCD Data Bus Bit 10 */
--#define AT91_PB11_LCDD6		(1 << 11)	/* A: LCD Data Bus Bit 6 */
--#define AT91_PB11_LCDD11	(1 << 11)	/* B: LCD Data Bus Bit 11 */
--#define AT91_PB12_LCDD7		(1 << 12)	/* A: LCD Data Bus Bit 7 */
--#define AT91_PB12_LCDD12	(1 << 12)	/* B: LCD Data Bus Bit 12 */
--#define AT91_PB13_LCDD8		(1 << 13)	/* A: LCD Data Bus Bit 8 */
--#define AT91_PB13_LCDD13	(1 << 13)	/* B: LCD Data Bus Bit 13 */
--#define AT91_PB14_LCDD9		(1 << 14)	/* A: LCD Data Bus Bit 9 */
--#define AT91_PB14_LCDD14	(1 << 14)	/* B: LCD Data Bus Bit 14 */
--#define AT91_PB15_LCDD10	(1 << 15)	/* A: LCD Data Bus Bit 10 */
--#define AT91_PB15_LCDD15	(1 << 15)	/* B: LCD Data Bus Bit 15 */
--#define AT91_PB16_LCDD11	(1 << 16)	/* A: LCD Data Bus Bit 11 */
--#define AT91_PB16_LCDD19	(1 << 16)	/* B: LCD Data Bus Bit 19 */
--#define AT91_PB17_LCDD12	(1 << 17)	/* A: LCD Data Bus Bit 12 */
--#define AT91_PB17_LCDD20	(1 << 17)	/* B: LCD Data Bus Bit 20 */
--#define AT91_PB18_LCDD13	(1 << 18)	/* A: LCD Data Bus Bit 13 */
--#define AT91_PB18_LCDD21	(1 << 18)	/* B: LCD Data Bus Bit 21 */
--#define AT91_PB19_LCDD14	(1 << 19)	/* A: LCD Data Bus Bit 14 */
--#define AT91_PB19_LCDD22	(1 << 19)	/* B: LCD Data Bus Bit 22 */
--#define AT91_PB20_LCDD15	(1 << 20)	/* A: LCD Data Bus Bit 15 */
--#define AT91_PB20_LCDD23	(1 << 20)	/* B: LCD Data Bus Bit 23 */
--#define AT91_PB21_TF0		(1 << 21)	/* A: SSC0 Transmit Frame Sync */
--#define AT91_PB21_LCDD16	(1 << 21)	/* B: LCD Data Bus Bit 16 */
--#define AT91_PB22_TK0		(1 << 22)	/* A: SSC0 Transmit Clock */
--#define AT91_PB22_LCDD17	(1 << 22)	/* B: LCD Data Bus Bit 17 */
--#define AT91_PB23_TD0		(1 << 23)	/* A: SSC0 Transmit Data */
--#define AT91_PB23_LCDD18	(1 << 23)	/* B: LCD Data Bus Bit 18 */
--#define AT91_PB24_RD0		(1 << 24)	/* A: SSC0 Receive Data */
--#define AT91_PB24_LCDD19	(1 << 24)	/* B: LCD Data Bus Bit 19 */
--#define AT91_PB25_RK0		(1 << 25)	/* A: SSC0 Receive Clock */
--#define AT91_PB25_LCDD20	(1 << 25)	/* B: LCD Data Bus Bit 20 */
--#define AT91_PB26_RF0		(1 << 26)	/* A: SSC0 Receive Frame Sync */
--#define AT91_PB26_LCDD21	(1 << 26)	/* B: LCD Data Bus Bit 21 */
--#define AT91_PB27_SPI1_NPCS1	(1 << 27)	/* A: SPI1 Peripheral Chip Select 1 */
--#define AT91_PB27_LCDD22	(1 << 27)	/* B: LCD Data Bus Bit 22 */
--#define AT91_PB28_SPI1_NPCS0	(1 << 28)	/* A: SPI1 Peripheral Chip Select 0 */
--#define AT91_PB28_LCDD23	(1 << 28)	/* B: LCD Data Bus Bit 23 */
--#define AT91_PB29_SPI1_SPCK	(1 << 29)	/* A: SPI1 Serial Clock */
--#define AT91_PB29_IRQ2		(1 << 29)	/* B: Interrupt input 2 */
--#define AT91_PB30_SPI1_MISO	(1 << 30)	/* A: SPI1 Master In Slave */
--#define AT91_PB30_IRQ1		(1 << 30)	/* B: Interrupt input 1 */
--#define AT91_PB31_SPI1_MOSI	(1 << 31)	/* A: SPI1 Master Out Slave */
--#define AT91_PB31_PCK2		(1 << 31)	/* B: PMC Programmable clock Output 2 */
--
--#define AT91_PC0_SMOE		(1 << 0)	/* A: SmartMedia Output Enable */
--#define AT91_PC0_NCS6		(1 << 0)	/* B: Chip Select 6 */
--#define AT91_PC1_SMWE		(1 << 1)	/* A: SmartMedia Write Enable */
--#define AT91_PC1_NCS7		(1 << 1)	/* B: Chip Select 7 */
--#define AT91_PC2_NWAIT		(1 << 2)	/* A: NWAIT */
--#define AT91_PC2_IRQ0		(1 << 2)	/* B: Interrupt input 0 */
--#define AT91_PC3_A25_CFRNW	(1 << 3)	/* A: Address Bus[25] / Compact Flash Read Not Write */
--#define AT91_PC4_NCS4_CFCS0	(1 << 4)	/* A: Chip Select 4 / CompactFlash Chip Select 0 */
--#define AT91_PC5_NCS5_CFCS1	(1 << 5)	/* A: Chip Select 5 / CompactFlash Chip Select 1 */
--#define AT91_PC6_CFCE1		(1 << 6)	/* A: CompactFlash Chip Enable 1 */
--#define AT91_PC7_CFCE2		(1 << 7)	/* A: CompactFlash Chip Enable 2 */
--#define AT91_PC8_TXD0		(1 << 8)	/* A: USART0 Transmit Data */
--#define AT91_PC8_PCK2		(1 << 8)	/* B: PMC Programmable clock Output 2 */
--#define AT91_PC9_RXD0		(1 << 9)	/* A: USART0 Receive Data */
--#define AT91_PC9_PCK3		(1 << 9)	/* B: PMC Programmable clock Output 3 */
--#define AT91_PC10_RTS0		(1 << 10)	/* A: USART0 Ready To Send */
--#define AT91_PC10_SCK0		(1 << 10)	/* B: USART0 Serial Clock */
--#define AT91_PC11_CTS0		(1 << 11)	/* A: USART0 Clear To Send */
--#define AT91_PC11_FIQ		(1 << 11)	/* B: AIC Fast Interrupt Input */
--#define AT91_PC12_TXD1		(1 << 12)	/* A: USART1 Transmit Data */
--#define AT91_PC12_NCS6		(1 << 12)	/* B: Chip Select 6 */
--#define AT91_PC13_RXD1		(1 << 13)	/* A: USART1 Receive Data */
--#define AT91_PC13_NCS7		(1 << 13)	/* B: Chip Select 7 */
--#define AT91_PC14_TXD2		(1 << 14)	/* A: USART2 Transmit Data */
--#define AT91_PC14_SPI1_NPCS2	(1 << 14)	/* B: SPI1 Peripheral Chip Select 2 */
--#define AT91_PC15_RXD2		(1 << 15)	/* A: USART2 Receive Data */
--#define AT91_PC15_SPI1_NPCS3	(1 << 15)	/* B: SPI1 Peripheral Chip Select 3 */
--#define AT91_PC16_D16		(1 << 16)	/* A: Data Bus [16] */
--#define AT91_PC16_TCLK0		(1 << 16)	/* B: Timer Counter 0 external clock input */
--#define AT91_PC17_D17		(1 << 17)	/* A: Data Bus [17] */
--#define AT91_PC17_TCLK1		(1 << 17)	/* B: Timer Counter 1 external clock input */
--#define AT91_PC18_D18		(1 << 18)	/* A: Data Bus [18] */
--#define AT91_PC18_TCLK2		(1 << 18)	/* B: Timer Counter 2 external clock input */
--#define AT91_PC19_D19		(1 << 19)	/* A: Data Bus [19] */
--#define AT91_PC19_TIOA0		(1 << 19)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
--#define AT91_PC20_D20		(1 << 20)	/* A: Data Bus [20] */
--#define AT91_PC20_TIOB0		(1 << 20)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
--#define AT91_PC21_D21		(1 << 21)	/* A: Data Bus [21] */
--#define AT91_PC21_TIOA1		(1 << 21)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
--#define AT91_PC22_D22		(1 << 22)	/* A: Data Bus [22] */
--#define AT91_PC22_TIOB1		(1 << 22)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
--#define AT91_PC23_D23		(1 << 23)	/* A: Data Bus [23] */
--#define AT91_PC23_TIOA2		(1 << 23)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
--#define AT91_PC24_D24		(1 << 24)	/* A: Data Bus [24] */
--#define AT91_PC24_TIOB2		(1 << 24)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
--#define AT91_PC25_D25		(1 << 25)	/* A: Data Bus [25] */
--#define AT91_PC25_TF2		(1 << 25)	/* B: SSC2 Transmit Frame Sync */
--#define AT91_PC26_D26		(1 << 26)	/* A: Data Bus [26] */
--#define AT91_PC26_TK2		(1 << 26)	/* B: SSC2 Transmit Clock */
--#define AT91_PC27_D27		(1 << 27)	/* A: Data Bus [27] */
--#define AT91_PC27_TD2		(1 << 27)	/* B: SSC2 Transmit Data */
--#define AT91_PC28_D28		(1 << 28)	/* A: Data Bus [28] */
--#define AT91_PC28_RD2		(1 << 28)	/* B: SSC2 Receive Data */
--#define AT91_PC29_D29		(1 << 29)	/* A: Data Bus [29] */
--#define AT91_PC29_RK2		(1 << 29)	/* B: SSC2 Receive Clock */
--#define AT91_PC30_D30		(1 << 30)	/* A: Data Bus [30] */
--#define AT91_PC30_RF2		(1 << 30)	/* B: SSC2 Receive Frame Sync */
--#define AT91_PC31_D31		(1 << 31)	/* A: Data Bus [31] */
--#define AT91_PC31_PCK1		(1 << 31)	/* B: PMC Programmable clock Output 1 */
--#endif
--
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9263.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9263.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9263.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9263.h	Tue May  8 12:56:33 2007
-@@ -119,13 +119,5 @@
- #define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
- #define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
- 
--#if 0
--/*
-- * PIO pin definitions (peripheral A/B multiplexing).
-- */
--
--// TODO: Add
--
--#endif
- 
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl.h	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl.h	Fri May 11 14:53:48 2007
-@@ -0,0 +1,110 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9260.h
-+ *
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Common definitions.
-+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#ifndef AT91SAM9RL_H
-+#define AT91SAM9RL_H
-+
-+/*
-+ * Peripheral identifiers/interrupts.
-+ */
-+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-+#define AT91_ID_SYS		1	/* System Controller */
-+#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
-+#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
-+#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
-+#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
-+#define AT91SAM9RL_ID_US0	6	/* USART 0 */
-+#define AT91SAM9RL_ID_US1	7	/* USART 1 */
-+#define AT91SAM9RL_ID_US2	8	/* USART 2 */
-+#define AT91SAM9RL_ID_US3	9	/* USART 3 */
-+#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
-+#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
-+#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
-+#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
-+#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-+#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-+#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
-+#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
-+#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
-+#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
-+#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
-+#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
-+#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
-+#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
-+#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
-+#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
-+
-+
-+/*
-+ * User Peripheral physical base addresses.
-+ */
-+#define AT91SAM9RL_BASE_TCB0	0xfffa0000
-+#define AT91SAM9RL_BASE_TC0	0xfffa0000
-+#define AT91SAM9RL_BASE_TC1	0xfffa0040
-+#define AT91SAM9RL_BASE_TC2	0xfffa0080
-+#define AT91SAM9RL_BASE_MCI	0xfffa4000
-+#define AT91SAM9RL_BASE_TWI0	0xfffa8000
-+#define AT91SAM9RL_BASE_TWI1	0xfffac000
-+#define AT91SAM9RL_BASE_US0	0xfffb0000
-+#define AT91SAM9RL_BASE_US1	0xfffb4000
-+#define AT91SAM9RL_BASE_US2	0xfffb8000
-+#define AT91SAM9RL_BASE_US3	0xfffbc000
-+#define AT91SAM9RL_BASE_SSC0	0xfffc0000
-+#define AT91SAM9RL_BASE_SSC1	0xfffc4000
-+#define AT91SAM9RL_BASE_PWMC	0xfffc8000
-+#define AT91SAM9RL_BASE_SPI	0xfffcc000
-+#define AT91SAM9RL_BASE_TSC	0xfffd0000
-+#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
-+#define AT91SAM9RL_BASE_AC97C	0xfffd8000
-+#define AT91_BASE_SYS		0xffffc000
-+
-+
-+/*
-+ * System Peripherals (offset from AT91_BASE_SYS)
-+ */
-+#define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
-+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
-+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)
-+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-+#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
-+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
-+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)
-+
-+
-+/*
-+ * Internal Memory.
-+ */
-+#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-+#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-+
-+#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
-+#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
-+
-+#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
-+#define AT91SAM9RL_UDPHS_BASE	0x00600000	/* USB Device HS controller */
-+
-+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl_matrix.h linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl_matrix.h
---- linux-2.6.21/include/asm-arm/arch-at91/at91sam9rl_matrix.h	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/at91sam9rl_matrix.h	Fri May 11 16:18:45 2007
-@@ -0,0 +1,96 @@
-+/*
-+ * include/asm-arm/arch-at91/at91sam9rl_matrix.h
-+ *
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
-+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file COPYING in the main directory of this archive for
-+ * more details.
-+ */
-+
-+#ifndef AT91SAM9RL_MATRIX_H
-+#define AT91SAM9RL_MATRIX_H
-+
-+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-+
-+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-+
-+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-+
-+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-+#define		AT91_MATRIX_RCB2		(1 << 2)
-+#define		AT91_MATRIX_RCB3		(1 << 3)
-+#define		AT91_MATRIX_RCB4		(1 << 4)
-+#define		AT91_MATRIX_RCB5		(1 << 5)
-+
-+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
-+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-+#define			AT91_MATRIX_ITCM_0		(0 << 0)
-+#define			AT91_MATRIX_ITCM_16		(5 << 0)
-+#define			AT91_MATRIX_ITCM_32		(6 << 0)
-+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-+#define			AT91_MATRIX_DTCM_0		(0 << 4)
-+#define			AT91_MATRIX_DTCM_16		(5 << 4)
-+#define			AT91_MATRIX_DTCM_32		(6 << 4)
-+
-+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
-+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-+
-+
-+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/board.h linux-2.6-stable/include/asm-arm/arch-at91/board.h
---- linux-2.6.21/include/asm-arm/arch-at91/board.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/board.h	Thu May 10 12:21:10 2007
-@@ -62,7 +62,7 @@
- };
- extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
- 
-- /* Ethernet */
-+ /* Ethernet (EMAC & MACB) */
- struct at91_eth_data {
- 	u8		phy_irq_pin;	/* PHY IRQ */
- 	u8		is_rmii;	/* using RMII interface? */
-@@ -114,9 +114,31 @@
- };
- extern void __init at91_add_device_serial(void);
- 
-+ /* LCD Controller */
-+struct atmel_lcdfb_info;
-+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
-+
-+ /* AC97 */
-+struct atmel_ac97_data {
-+	u8		reset_pin;	/* reset */
-+};
-+extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
-+
-+ /* ISI */
-+extern void __init at91_add_device_isi(void);
-+
-  /* LEDs */
- extern u8 at91_leds_cpu;
- extern u8 at91_leds_timer;
- extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
- 
-+struct at91_gpio_led {
-+	u8		index;		/* index of LED */
-+	char*		name;		/* name of LED */
-+	u8		gpio;		/* AT91_PIN_xx */
-+	u8		flags;		/* 1=active-high */
-+	char*		trigger;	/* default trigger */
-+};
-+extern void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr);
-+
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/cpu.h linux-2.6-stable/include/asm-arm/arch-at91/cpu.h
---- linux-2.6.21/include/asm-arm/arch-at91/cpu.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/cpu.h	Wed May  9 10:20:54 2007
-@@ -26,6 +26,8 @@
- #define ARCH_ID_AT91SAM9XE256	0x329a93a0
- #define ARCH_ID_AT91SAM9XE512	0x329aa3a0
- 
-+#define ARCH_ID_AT91SAM9RL64	0x019b03a0
-+
- static inline unsigned long at91_cpu_identify(void)
- {
- 	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-@@ -68,4 +70,10 @@
- #define cpu_is_at91sam9263()	(0)
- #endif
- 
-+#ifdef CONFIG_ARCH_AT91SAM9RL
-+#define cpu_is_at91sam9rl()	(at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
-+#else
-+#define cpu_is_at91sam9rl()	(0)
-+#endif
-+
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/hardware.h linux-2.6-stable/include/asm-arm/arch-at91/hardware.h
---- linux-2.6.21/include/asm-arm/arch-at91/hardware.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/hardware.h	Fri May 11 14:45:12 2007
-@@ -24,6 +24,8 @@
- #include <asm/arch/at91sam9261.h>
- #elif defined(CONFIG_ARCH_AT91SAM9263)
- #include <asm/arch/at91sam9263.h>
-+#elif defined(CONFIG_ARCH_AT91SAM9RL)
-+#include <asm/arch/at91sam9rl.h>
- #else
- #error "Unsupported AT91 processor"
- #endif
-@@ -69,22 +71,5 @@
- /* Clocks */
- #define AT91_SLOW_CLOCK		32768		/* slow clock */
- 
--#ifndef __ASSEMBLY__
--#include <asm/io.h>
--
--static inline unsigned int at91_sys_read(unsigned int reg_offset)
--{
--	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
--
--	return __raw_readl(addr + reg_offset);
--}
--
--static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
--{
--	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
--
--	__raw_writel(value, addr + reg_offset);
--}
--#endif
- 
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/ics1523.h linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h
---- linux-2.6.21/include/asm-arm/arch-at91/ics1523.h	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/ics1523.h	Tue May  8 12:13:31 2007
-@@ -0,0 +1,154 @@
-+//*----------------------------------------------------------------------------
-+//*         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+//*----------------------------------------------------------------------------
-+//* The software is delivered "AS IS" without warranty or condition of any
-+//* kind, either express, implied or statutory. This includes without
-+//* limitation any warranty or condition with respect to merchantability or
-+//* fitness for any particular purpose, or against the infringements of
-+//* intellectual property rights of others.
-+//*----------------------------------------------------------------------------
-+//* File Name           : ics1523.h
-+//* Object              : Clock Generator Prototyping File.
-+//*
-+//* 1.0 08/28/02 ED     : Creation
-+//* 1.2 13/01/03 FB		: Update on lib V3
-+//*----------------------------------------------------------------------------
-+
-+#ifndef ics1523_h
-+#define ics1523_h
-+
-+/*-------------------------------------------*/
-+/* ICS1523 TWI Serial Clock Definition       */
-+/*-------------------------------------------*/
-+
-+#define		ICS_MIN_CLOCK		100		/* Min Frequency Access Clock KHz */
-+#define		ICS_MAX_CLOCK		400		/* Max Frequency Access Clock KHz */
-+#define		ICS_TRANSFER_RATE	ICS_MAX_CLOCK	/* Transfer speed to apply */
-+
-+#define		ICS_WRITE_CLK_PNB	30		/* TWCK Clock Periods required to write */
-+#define		ICS_READ_CLK_PNB	40		/* TWCK Clock Periods required to read */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Write Operation Definition        */
-+/*-------------------------------------------*/
-+
-+#define		ICS1523_ACCESS_OK	0		/* OK */
-+#define		ICS1523_ACCESS_ERROR	-1		/* NOK */
-+
-+/*-------------------------------------------*/
-+/* ICS1523 Device Addresses Definition       */
-+/*-------------------------------------------*/
-+
-+#define		ICS_ADDR		0x26		/* Device Address */
-+
-+/*--------------------------------------------------*/
-+/* ICS1523 Registers Internal Addresses Definition  */
-+/*--------------------------------------------------*/
-+
-+#define		ICS_ICR			0x0		/* Input Control Register */
-+#define		ICS_LCR			0x1		/* Loop Control Register */
-+#define		ICS_FD0			0x2		/* PLL FeedBack Divider LSBs */
-+#define		ICS_FD1			0x3		/* PLL FeedBack Divider MSBs */
-+#define		ICS_DPAO		0x4		/* Dynamic Phase Aligner Offset */
-+#define		ICS_DPAC		0x5		/* Dynamic Phase Aligner Resolution */
-+#define		ICS_OE			0x6		/* Output Enables Register */
-+#define		ICS_OD			0x7		/* Osc Divider Register */
-+#define		ICS_SWRST		0x8		/* DPA & PLL Reset Register */
-+#define		ICS_VID			0x10		/* Chip Version Register */
-+#define		ICS_RID			0x11		/* Chip Revision Register */
-+#define		ICS_SR			0x12		/* Status Register */
-+
-+/*------------------------------------------------------*/
-+/* ICS1523 Input Control Register Bits Definition       */
-+/*------------------------------------------------------*/
-+
-+#define		ICS_PDEN		0x1		/* Phase Detector Enable */
-+#define		ICS_PDPOL		0x2		/* Phase Detector Enable Polarity */
-+#define		ICS_REFPOL		0x4		/* External Reference Polarity */
-+#define		ICS_FBKPOL		0x8		/* External Feedback Polarity */
-+#define		ICS_FBKSEL		0x10		/* External Feedback Select */
-+#define		ICS_FUNCSEL		0x20		/* Function Out Select */
-+#define		ICS_ENPLS		0x40		/* Enable PLL Lock/Ref Status Output */
-+#define		ICS_ENDLS		0x80		/* Enable DPA Lock/Ref Status Output */
-+
-+/*-----------------------------------------------------*/
-+/* ICS1523 Loop Control Register Bits Definition       */
-+/*-----------------------------------------------------*/
-+
-+#define		ICS_PFD			0x7		/* Phase Detector Gain */
-+#define		ICS_PSD			0x30		/* Post-Scaler Divider */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider LSBs Definition       */
-+/*----------------------------------------------------*/
-+
-+#define		ICS_FBDL		0xFF		/* PLL FeedBack Divider LSBs */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 PLL FeedBack Divider MSBs Definition       */
-+/*----------------------------------------------------*/
-+
-+#define		ICS_FBDM		0xF		/* PLL FeedBack Divider MSBs */
-+
-+/*------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Offset Bits Definition       */
-+/*------------------------------------------------------------*/
-+
-+#define		ICS_DPAOS		0x2F		/* Dynamic Phase Aligner Offset */
-+#define		ICS_FILSEL		0x80		/* Loop Filter Select */
-+
-+/*----------------------------------------------------------------*/
-+/* ICS1523 Dynamic Phase Aligner Resolution Bits Definition       */
-+/*----------------------------------------------------------------*/
-+
-+#define		ICS_DPARES		0x3		/* Dynamic Phase Aligner Resolution */
-+#define		ICS_MMREV		0xFC		/* Metal Mask Revision Number */
-+
-+/*-------------------------------------------------------*/
-+/* ICS1523 Output Enables Register Bits Definition       */
-+/*-------------------------------------------------------*/
-+
-+#define		ICS_OEPCK		0x1		/* Output Enable for PECL PCLK Outputs */
-+#define		ICS_OETCK		0x2		/* Output Enable for STTL CLK Output */
-+#define		ICS_OEP2		0x4		/* Output Enable for PECL CLK/2 Outputs */
-+#define		ICS_OET2		0x8		/* Output Enable for STTL CLK/2 Output */
-+#define		ICS_OEF			0x10		/* Output Enable for STTL FUNC Output */
-+#define		ICS_CLK2INV		0x20		/* CLK/2 Invert */
-+#define		ICS_OSCL		0xC0		/* SSTL Clock Scaler */
-+
-+/*----------------------------------------------------*/
-+/* ICS1523 Osc Divider Register Bits Definition       */
-+/*----------------------------------------------------*/
-+
-+#define		ICS_OSCDIV		0x7F		/* Oscillator Divider Modulus */
-+#define		ICS_INSEL		0x80		/* Input Select */
-+
-+/*---------------------------------------------------*/
-+/* ICS1523 DPA & PLL Reset Register Definition       */
-+/*---------------------------------------------------*/
-+
-+#define		ICS_DPAR		0x0A		/* DPA Reset Command */
-+#define		ICS_PLLR		0x50		/* PLL Reset Command */
-+
-+/*------------------------------------------------*/
-+/* ICS1523 Chip Version Register Definition       */
-+/*------------------------------------------------*/
-+
-+#define		ICS_CHIPV		0xFF		/* Chip Version */
-+
-+/*-------------------------------------------------*/
-+/* ICS1523 Chip Revision Register Definition       */
-+/*-------------------------------------------------*/
-+
-+#define		ICS_CHIPR		0xFF		/* Chip Revision */
-+
-+/*------------------------------------------*/
-+/* ICS1523 Status Register Definition       */
-+/*------------------------------------------*/
-+
-+#define		ICS_DPALOCK		0x1		/* DPA Lock Status */
-+#define		ICS_PLLLOCK		0x2		/* PLL Lock Status */
-+
-+int at91_ics1523_init(void);
-+
-+#endif /* ics1523_h */
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/io.h linux-2.6-stable/include/asm-arm/arch-at91/io.h
---- linux-2.6.21/include/asm-arm/arch-at91/io.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/io.h	Fri May 11 14:45:12 2007
-@@ -29,4 +29,22 @@
- #define __mem_pci(a)		(a)
- 
- 
-+#ifndef __ASSEMBLY__
-+
-+static inline unsigned int at91_sys_read(unsigned int reg_offset)
-+{
-+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-+
-+	return __raw_readl(addr + reg_offset);
-+}
-+
-+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-+{
-+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-+
-+	__raw_writel(value, addr + reg_offset);
-+}
-+
-+#endif
-+
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/irqs.h linux-2.6-stable/include/asm-arm/arch-at91/irqs.h
---- linux-2.6.21/include/asm-arm/arch-at91/irqs.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/irqs.h	Fri May 11 14:45:12 2007
-@@ -21,6 +21,7 @@
- #ifndef __ASM_ARCH_IRQS_H
- #define __ASM_ARCH_IRQS_H
- 
-+#include <asm/io.h>
- #include <asm/arch/at91_aic.h>
- 
- #define NR_AIC_IRQS 32
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/spi.h linux-2.6-stable/include/asm-arm/arch-at91/spi.h
---- linux-2.6.21/include/asm-arm/arch-at91/spi.h	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/include/asm-arm/arch-at91/spi.h	Tue May  8 14:31:24 2007
-@@ -0,0 +1,54 @@
-+/*
-+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
-+ *
-+ * (c) SAN People (Pty) Ltd
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ */
-+
-+#ifndef AT91_LEGACY_SPI_H
-+#define AT91_LEGACY_SPI_H
-+
-+#define SPI_MAJOR		153	/* registered device number */
-+
-+#define DEFAULT_SPI_CLK		6000000
-+
-+
-+/* Maximum number of buffers in a single SPI transfer.
-+ *  DataFlash uses maximum of 2
-+ *  spidev interface supports up to 8.
-+ */
-+#define MAX_SPI_TRANSFERS	8
-+#define NR_SPI_DEVICES		4	/* number of devices on SPI bus */
-+
-+/*
-+ * Describes the buffers for a SPI transfer.
-+ * A transmit & receive buffer must be specified for each transfer
-+ */
-+struct spi_transfer_list {
-+	void* tx[MAX_SPI_TRANSFERS];	/* transmit */
-+	int txlen[MAX_SPI_TRANSFERS];
-+	void* rx[MAX_SPI_TRANSFERS];	/* receive */
-+	int rxlen[MAX_SPI_TRANSFERS];
-+	int nr_transfers;		/* number of transfers */
-+	int curr;			/* current transfer */
-+};
-+
-+struct spi_local {
-+	unsigned int pcs;		/* Peripheral Chip Select value */
-+
-+	struct spi_transfer_list *xfers;	/* current transfer list */
-+	dma_addr_t tx, rx;		/* DMA address for current transfer */
-+	dma_addr_t txnext, rxnext;	/* DMA address for next transfer */
-+};
-+
-+
-+/* Exported functions */
-+extern void spi_access_bus(short device);
-+extern void spi_release_bus(short device);
-+extern int spi_transfer(struct spi_transfer_list* list);
-+
-+#endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/timex.h linux-2.6-stable/include/asm-arm/arch-at91/timex.h
---- linux-2.6.21/include/asm-arm/arch-at91/timex.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/timex.h	Wed May  9 10:20:53 2007
-@@ -37,6 +37,11 @@
- #define AT91SAM9_MASTER_CLOCK	99959500
- #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
- 
-+#elif defined(CONFIG_ARCH_AT91SAM9RL)
-+
-+#define AT91SAM9_MASTER_CLOCK	100000000
-+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-+
- #endif
- 
- #endif
-diff -urN -x CVS linux-2.6.21/include/asm-arm/arch-at91/uncompress.h linux-2.6-stable/include/asm-arm/arch-at91/uncompress.h
---- linux-2.6.21/include/asm-arm/arch-at91/uncompress.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/asm-arm/arch-at91/uncompress.h	Fri May 11 14:45:12 2007
-@@ -21,7 +21,7 @@
- #ifndef __ASM_ARCH_UNCOMPRESS_H
- #define __ASM_ARCH_UNCOMPRESS_H
- 
--#include <asm/hardware.h>
-+#include <asm/io.h>
- #include <asm/arch/at91_dbgu.h>
- 
- /*
-diff -urN -x CVS linux-2.6.21/include/linux/clk.h linux-2.6-stable/include/linux/clk.h
---- linux-2.6.21/include/linux/clk.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/linux/clk.h	Tue May  8 12:13:31 2007
-@@ -121,4 +121,24 @@
-  */
- struct clk *clk_get_parent(struct clk *clk);
- 
-+/**
-+ * clk_must_disable - report whether a clock's users must disable it
-+ * @clk: one node in the clock tree
-+ *
-+ * This routine returns true only if the upcoming system state requires
-+ * disabling the specified clock.
-+ *
-+ * It's common for platform power states to constrain certain clocks (and
-+ * their descendants) to be unavailable, while other states allow that
-+ * clock to be active.  A platform's power states often include an "all on"
-+ * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and
-+ * operating states which sacrifice functionality for lower power usage.
-+ *
-+ * The constraint value is commonly tested in device driver suspend(), to
-+ * leave clocks active if they are needed for features like wakeup events.
-+ * On platforms that support reduced functionality operating states, the
-+ * constraint may also need to be tested during resume() and probe() calls.
-+ */
-+int clk_must_disable(struct clk *clk);
-+
- #endif
-diff -urN -x CVS linux-2.6.21/include/linux/i2c-id.h linux-2.6-stable/include/linux/i2c-id.h
---- linux-2.6.21/include/linux/i2c-id.h	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/include/linux/i2c-id.h	Tue May  8 12:13:31 2007
-@@ -202,6 +202,7 @@
- 
- /* --- PCA 9564 based algorithms */
- #define I2C_HW_A_ISA		0x1a0000 /* generic ISA Bus interface card */
-+#define I2C_HW_A_PLAT		0x1a0001 /* generic platform_bus interface */
- 
- /* --- ACPI Embedded controller algorithms                              */
- #define I2C_HW_ACPI_EC          0x1f0000
-diff -urN -x CVS linux-2.6.21/include/video/atmel_lcdc.h linux-2.6-stable/include/video/atmel_lcdc.h
---- linux-2.6.21/include/video/atmel_lcdc.h	Thu Jan  1 02:00:00 1970
-+++ linux-2.6-stable/include/video/atmel_lcdc.h	Thu May 10 12:34:01 2007
-@@ -0,0 +1,196 @@
-+/*
-+ *  Header file for AT91/AT32 LCD Controller
-+ *
-+ *  Data structure and register user interface
-+ *
-+ *  Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+#ifndef __ATMEL_LCDC_H__
-+#define __ATMEL_LCDC_H__
-+
-+ /* LCD Controller info data structure */
-+struct atmel_lcdfb_info {
-+	spinlock_t		lock;
-+	struct fb_info		*info;
-+	void __iomem		*mmio;
-+	unsigned long		irq_base;
-+
-+	unsigned int		guard_time;
-+	struct platform_device	*pdev;
-+	struct clk		*bus_clk;
-+	struct clk		*lcdc_clk;
-+	unsigned int		default_bpp;
-+	unsigned int		default_lcdcon2;
-+	unsigned int		default_dmacon;
-+	void (*atmel_lcdfb_power_control)(int on);
-+	struct fb_monspecs	*default_monspecs;
-+	u32			pseudo_palette[16];
-+};
-+
-+#define ATMEL_LCDC_DMABADDR1	0x00
-+#define ATMEL_LCDC_DMABADDR2	0x04
-+#define ATMEL_LCDC_DMAFRMPT1	0x08
-+#define ATMEL_LCDC_DMAFRMPT2	0x0c
-+#define ATMEL_LCDC_DMAFRMADD1	0x10
-+#define ATMEL_LCDC_DMAFRMADD2	0x14
-+
-+#define ATMEL_LCDC_DMAFRMCFG	0x18
-+#define	ATMEL_LCDC_FRSIZE	(0x7fffff <<  0)
-+#define	ATMEL_LCDC_BLENGTH_OFFSET	24
-+#define	ATMEL_LCDC_BLENGTH	(0x7f     << ATMEL_LCDC_BLENGTH_OFFSET)
-+
-+#define ATMEL_LCDC_DMACON	0x1c
-+#define	ATMEL_LCDC_DMAEN	(0x1 << 0)
-+#define	ATMEL_LCDC_DMARST	(0x1 << 1)
-+#define	ATMEL_LCDC_DMABUSY	(0x1 << 2)
-+#define		ATMEL_LCDC_DMAUPDT	(0x1 << 3)
-+#define		ATMEL_LCDC_DMA2DEN	(0x1 << 4)
-+
-+#define ATMEL_LCDC_DMA2DCFG	0x20
-+#define		ATMEL_LCDC_ADDRINC_OFFSET	0
-+#define		ATMEL_LCDC_ADDRINC		(0xffff)
-+#define		ATMEL_LCDC_PIXELOFF_OFFSET	24
-+#define		ATMEL_LCDC_PIXELOFF		(0x1f << 24)
-+
-+#define ATMEL_LCDC_LCDCON1	0x0800
-+#define	ATMEL_LCDC_BYPASS	(1     <<  0)
-+#define	ATMEL_LCDC_CLKVAL_OFFSET	12
-+#define	ATMEL_LCDC_CLKVAL	(0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
-+#define	ATMEL_LCDC_LINCNT	(0x7ff << 21)
-+
-+#define ATMEL_LCDC_LCDCON2	0x0804
-+#define	ATMEL_LCDC_DISTYPE	(3 << 0)
-+#define		ATMEL_LCDC_DISTYPE_STNMONO	(0 << 0)
-+#define		ATMEL_LCDC_DISTYPE_STNCOLOR	(1 << 0)
-+#define		ATMEL_LCDC_DISTYPE_TFT		(2 << 0)
-+#define	ATMEL_LCDC_SCANMOD	(1 << 2)
-+#define		ATMEL_LCDC_SCANMOD_SINGLE	(0 << 2)
-+#define		ATMEL_LCDC_SCANMOD_DUAL		(1 << 2)
-+#define	ATMEL_LCDC_IFWIDTH	(3 << 3)
-+#define		ATMEL_LCDC_IFWIDTH_4		(0 << 3)
-+#define		ATMEL_LCDC_IFWIDTH_8		(1 << 3)
-+#define		ATMEL_LCDC_IFWIDTH_16		(2 << 3)
-+#define	ATMEL_LCDC_PIXELSIZE	(7 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_1		(0 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_2		(1 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_4		(2 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_8		(3 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_16		(4 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_24		(5 << 5)
-+#define		ATMEL_LCDC_PIXELSIZE_32		(6 << 5)
-+#define	ATMEL_LCDC_INVVD	(1 << 8)
-+#define		ATMEL_LCDC_INVVD_NORMAL		(0 << 8)
-+#define		ATMEL_LCDC_INVVD_INVERTED	(1 << 8)
-+#define	ATMEL_LCDC_INVFRAME	(1 << 9 )
-+#define		ATMEL_LCDC_INVFRAME_NORMAL	(0 << 9)
-+#define		ATMEL_LCDC_INVFRAME_INVERTED	(1 << 9)
-+#define	ATMEL_LCDC_INVLINE	(1 << 10)
-+#define		ATMEL_LCDC_INVLINE_NORMAL	(0 << 10)
-+#define		ATMEL_LCDC_INVLINE_INVERTED	(1 << 10)
-+#define	ATMEL_LCDC_INVCLK	(1 << 11)
-+#define		ATMEL_LCDC_INVCLK_NORMAL	(0 << 11)
-+#define		ATMEL_LCDC_INVCLK_INVERTED	(1 << 11)
-+#define	ATMEL_LCDC_INVDVAL	(1 << 12)
-+#define		ATMEL_LCDC_INVDVAL_NORMAL	(0 << 12)
-+#define		ATMEL_LCDC_INVDVAL_INVERTED	(1 << 12)
-+#define	ATMEL_LCDC_CLKMOD	(1 << 15)
-+#define		ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
-+#define		ATMEL_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
-+#define	ATMEL_LCDC_MEMOR	(1 << 31)
-+#define		ATMEL_LCDC_MEMOR_BIG		(0 << 31)
-+#define		ATMEL_LCDC_MEMOR_LITTLE		(1 << 31)
-+
-+#define ATMEL_LCDC_TIM1		0x0808
-+#define	ATMEL_LCDC_VFP		(0xff <<  0)
-+#define	ATMEL_LCDC_VBP_OFFSET		8
-+#define	ATMEL_LCDC_VBP		(0xff <<  ATMEL_LCDC_VBP_OFFSET)
-+#define	ATMEL_LCDC_VPW_OFFSET		16
-+#define	ATMEL_LCDC_VPW		(0x3f << ATMEL_LCDC_VPW_OFFSET)
-+#define	ATMEL_LCDC_VHDLY_OFFSET		24
-+#define	ATMEL_LCDC_VHDLY	(0xf  << ATMEL_LCDC_VHDLY_OFFSET)
-+
-+#define ATMEL_LCDC_TIM2		0x080c
-+#define	ATMEL_LCDC_HBP		(0xff  <<  0)
-+#define	ATMEL_LCDC_HPW_OFFSET		8
-+#define	ATMEL_LCDC_HPW		(0x3f  <<  ATMEL_LCDC_HPW_OFFSET)
-+#define	ATMEL_LCDC_HFP_OFFSET		21
-+#define	ATMEL_LCDC_HFP		(0x7ff << ATMEL_LCDC_HFP_OFFSET)
-+
-+#define ATMEL_LCDC_LCDFRMCFG	0x0810
-+#define	ATMEL_LCDC_LINEVAL	(0x7ff <<  0)
-+#define	ATMEL_LCDC_HOZVAL_OFFSET	21
-+#define	ATMEL_LCDC_HOZVAL	(0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
-+
-+#define ATMEL_LCDC_FIFO		0x0814
-+#define	ATMEL_LCDC_FIFOTH	(0xffff)
-+
-+#define ATMEL_LCDC_MVAL		0x0818
-+
-+#define ATMEL_LCDC_DP1_2	0x081c
-+#define ATMEL_LCDC_DP4_7	0x0820
-+#define ATMEL_LCDC_DP3_5	0x0824
-+#define ATMEL_LCDC_DP2_3	0x0828
-+#define ATMEL_LCDC_DP5_7	0x082c
-+#define ATMEL_LCDC_DP3_4	0x0830
-+#define ATMEL_LCDC_DP4_5	0x0834
-+#define ATMEL_LCDC_DP6_7	0x0838
-+#define	ATMEL_LCDC_DP1_2_VAL	(0xff)
-+#define	ATMEL_LCDC_DP4_7_VAL	(0xfffffff)
-+#define	ATMEL_LCDC_DP3_5_VAL	(0xfffff)
-+#define	ATMEL_LCDC_DP2_3_VAL	(0xfff)
-+#define	ATMEL_LCDC_DP5_7_VAL	(0xfffffff)
-+#define	ATMEL_LCDC_DP3_4_VAL	(0xffff)
-+#define	ATMEL_LCDC_DP4_5_VAL	(0xfffff)
-+#define	ATMEL_LCDC_DP6_7_VAL	(0xfffffff)
-+
-+#define ATMEL_LCDC_PWRCON	0x083c
-+#define	ATMEL_LCDC_PWR		(1    <<  0)
-+#define	ATMEL_LCDC_GUARDT_OFFSET	1
-+#define	ATMEL_LCDC_GUARDT	(0x7f <<  ATMEL_LCDC_GUARDT_OFFSET)
-+#define	ATMEL_LCDC_BUSY		(1    << 31)
-+
-+#define ATMEL_LCDC_CONTRAST_CTR	0x0840
-+#define	ATMEL_LCDC_PS		(3 << 0)
-+#define		ATMEL_LCDC_PS_DIV1		(0 << 0)
-+#define		ATMEL_LCDC_PS_DIV2		(1 << 0)
-+#define		ATMEL_LCDC_PS_DIV4		(2 << 0)
-+#define		ATMEL_LCDC_PS_DIV8		(3 << 0)
-+#define	ATMEL_LCDC_POL		(1 << 2)
-+#define		ATMEL_LCDC_POL_NEGATIVE		(0 << 2)
-+#define		ATMEL_LCDC_POL_POSITIVE		(1 << 2)
-+#define	ATMEL_LCDC_ENA		(1 << 3)
-+#define		ATMEL_LCDC_ENA_PWMDISABLE	(0 << 3)
-+#define		ATMEL_LCDC_ENA_PWMENABLE	(1 << 3)
-+
-+#define ATMEL_LCDC_CONTRAST_VAL	0x0844
-+#define	ATMEL_LCDC_CVAL	(0xff)
-+
-+#define ATMEL_LCDC_IER		0x0848
-+#define ATMEL_LCDC_IDR		0x084c
-+#define ATMEL_LCDC_IMR		0x0850
-+#define ATMEL_LCDC_ISR		0x0854
-+#define ATMEL_LCDC_ICR		0x0858
-+#define	ATMEL_LCDC_LNI		(1 << 0)
-+#define	ATMEL_LCDC_LSTLNI	(1 << 1)
-+#define	ATMEL_LCDC_EOFI		(1 << 2)
-+#define	ATMEL_LCDC_UFLWI	(1 << 4)
-+#define	ATMEL_LCDC_OWRI		(1 << 5)
-+#define	ATMEL_LCDC_MERI		(1 << 6)
-+
-+#define ATMEL_LCDC_LUT(n)	(0x0c00 + ((n)*4))
-+
-+#endif /* __ATMEL_LCDC_H__ */
-diff -urN -x CVS linux-2.6.21/sound/soc/at91/eti_b1_wm8731.c linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c
---- linux-2.6.21/sound/soc/at91/eti_b1_wm8731.c	Thu Apr 26 05:08:32 2007
-+++ linux-2.6-stable/sound/soc/at91/eti_b1_wm8731.c	Tue May  8 12:13:58 2007
-@@ -34,8 +34,7 @@
- #include <sound/soc.h>
- #include <sound/soc-dapm.h>
- 
--#include <asm/arch/hardware.h>
--#include <asm/arch/at91_pio.h>
-+#include <asm/hardware.h>
- #include <asm/arch/gpio.h>
- 
- #include "../codecs/wm8731.h"
-@@ -48,13 +47,6 @@
- #define	DBG(x...)
- #endif
- 
--#define AT91_PIO_TF1	(1 << (AT91_PIN_PB6 - PIN_BASE) % 32)
--#define AT91_PIO_TK1	(1 << (AT91_PIN_PB7 - PIN_BASE) % 32)
--#define AT91_PIO_TD1	(1 << (AT91_PIN_PB8 - PIN_BASE) % 32)
--#define AT91_PIO_RD1	(1 << (AT91_PIN_PB9 - PIN_BASE) % 32)
--#define AT91_PIO_RK1	(1 << (AT91_PIN_PB10 - PIN_BASE) % 32)
--#define AT91_PIO_RF1	(1 << (AT91_PIN_PB11 - PIN_BASE) % 32)
--
- static struct clk *pck1_clk;
- static struct clk *pllb_clk;
- 
-@@ -277,7 +269,6 @@
- static int __init eti_b1_init(void)
- {
- 	int ret;
--	u32 ssc_pio_lines;
- 	struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data;
- 
- 	if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) {
-@@ -311,19 +302,12 @@
- 		goto fail_io_unmap;
- 	}
- 
-- 	ssc_pio_lines = AT91_PIO_TF1 | AT91_PIO_TK1 | AT91_PIO_TD1
--			| AT91_PIO_RD1 /* | AT91_PIO_RK1 */ | AT91_PIO_RF1;
--
--	/* Reset all PIO registers and assign lines to peripheral A */
-- 	at91_sys_write(AT91_PIOB + PIO_PDR,  ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_ODR,  ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_IFDR, ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_CODR, ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_IDR,  ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_MDDR, ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_PUDR, ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_ASR,  ssc_pio_lines);
-- 	at91_sys_write(AT91_PIOB + PIO_OWDR, ssc_pio_lines);
-+ 	at91_set_A_periph(AT91_PIN_PB6, 0);	/* TF1 */
-+ 	at91_set_A_periph(AT91_PIN_PB7, 0);	/* TK1 */
-+ 	at91_set_A_periph(AT91_PIN_PB8, 0);	/* TD1 */
-+ 	at91_set_A_periph(AT91_PIN_PB9, 0);	/* RD1 */
-+/* 	at91_set_A_periph(AT91_PIN_PB10, 0);*/	/* RK1 */ 	
-+ 	at91_set_A_periph(AT91_PIN_PB11, 0);	/* RF1 */
- 
- 	/*
- 	 * Set PCK1 parent to PLLB and its rate to 12 Mhz.
diff --git a/target/linux/at91-2.6/patches-2.6.21/001-vlink-machine.patch b/target/linux/at91-2.6/patches-2.6.21/001-vlink-machine.patch
deleted file mode 100644
index 1c12db3553..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/001-vlink-machine.patch
+++ /dev/null
@@ -1,211 +0,0 @@
---- linux-2.6.21.1.orig/arch/arm/boot/compressed/head-at91rm9200.S	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/boot/compressed/head-at91rm9200.S	2007-05-28 12:52:16.000000000 +0200
-@@ -61,6 +61,12 @@
- 		cmp	r7, r3
- 		beq	99f
- 
-+		@ FDL Versalink : 1053
-+		mov   r3, #(MACH_TYPE_VLINK & 0xff)
-+		orr r3, r3, #(MACH_TYPE_VLINK & 0xff00)
-+		cmp r7, r3
-+		beq 99f
-+
- 		@ Ajeco 1ARM : 1075
- 		mov	r3,	#(MACH_TYPE_ONEARM & 0xff)
- 		orr	r3, r3, #(MACH_TYPE_ONEARM & 0xff00)
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-05-28 13:09:54.000000000 +0200
-@@ -0,0 +1,160 @@
-+/*
-+ * linux/arch/arm/mach-at91/board-vlink.c
-+ *
-+ *  Copyright (C) 2005 SAN People
-+ *  Copyright (C) 2006,2007 Guthrie Consulting
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/hardware.h>
-+#include <asm/setup.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+#include <asm/mach/irq.h>
-+
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/at91rm9200_mc.h>
-+
-+#include "generic.h"
-+
-+
-+/*
-+ * Serial port configuration.
-+ *    0 .. 3 = USART0 .. USART3
-+ *    4      = DBGU
-+ */
-+static struct at91_uart_config __initdata vlink_uart_config = {
-+	.console_tty	= 0,				/* ttyS0 */
-+	.nr_tty		= 5,
-+	.tty_map	= { 4, 1, 0, 3, 2 }		/* ttyS0, ..., ttyS4 */
-+};
-+
-+static void __init vlink_map_io(void)
-+{
-+	/* Initialize processor: 18.432 MHz crystal */
-+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
-+
-+	/* Setup the LEDs */
-+//	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-+
-+	/* Setup the serial ports and console */
-+	at91_init_serial(&vlink_uart_config);
-+}
-+
-+static void __init vlink_init_irq(void)
-+{
-+	at91rm9200_init_interrupts(NULL);
-+}
-+
-+static struct at91_eth_data __initdata vlink_eth_data = {
-+	.phy_irq_pin	= AT91_PIN_PC4,
-+	.is_rmii	= 1,
-+};
-+
-+static struct at91_usbh_data __initdata vlink_usbh_data = {
-+	.ports		= 1,
-+};
-+
-+static struct at91_udc_data __initdata vlink_udc_data = {
-+	.vbus_pin	= AT91_PIN_PD4,
-+	.pullup_pin	= AT91_PIN_PD5,
-+};
-+
-+static struct at91_mmc_data __initdata vlink_mmc_data = {
-+//	.det_pin	= AT91_PIN_PB27,
-+	.slot_b		= 0,
-+	.wire4		= 1,
-+//	.wp_pin		= AT91_PIN_PA17,
-+};
-+
-+static struct spi_board_info vlink_spi_devices[] = {
-+	{	/* DataFlash chip */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 0,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	},
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+	{	/* DataFlash card */
-+		.modalias	= "mtd_dataflash",
-+		.chip_select	= 3,
-+		.max_speed_hz	= 15 * 1000 * 1000,
-+	},
-+#endif
-+};
-+
-+static struct at91_gpio_led vlink_leds[] = {
-+	{
-+		.name		= "led0",
-+		.gpio		= AT91_PIN_PB1,
-+		.trigger	= "heartbeat",
-+	},
-+	{
-+		.name		= "led1",
-+		.gpio		= AT91_PIN_PB2,
-+		.trigger	= "timer",
-+	}
-+};
-+
-+static void __init vlink_board_init(void)
-+{
-+	/* Serial */
-+	at91_add_device_serial();
-+	/* Ethernet */
-+	at91_add_device_eth(&vlink_eth_data);
-+	/* USB Host */
-+	at91_add_device_usbh(&vlink_usbh_data);
-+	/* USB Device */
-+	at91_add_device_udc(&vlink_udc_data);
-+	at91_set_multi_drive(vlink_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-+	/* I2C */
-+	at91_add_device_i2c();
-+	/* SPI */
-+	at91_add_device_spi(vlink_spi_devices, ARRAY_SIZE(vlink_spi_devices));
-+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-+	/* DataFlash card */
-+//	at91_set_gpio_output(AT91_PIN_PB22, 0);
-+#else
-+	/* MMC */
-+//	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-+	at91_add_device_mmc(0, &vlink_mmc_data);
-+#endif
-+	/* LEDs */
-+	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
-+}
-+
-+MACHINE_START(VLINK, "FDL VersaLink")
-+	/* Maintainer: Guthrie Consulting */
-+	.phys_io	= AT91_BASE_SYS,
-+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-+	.boot_params	= AT91_SDRAM_BASE + 0x100,
-+	.timer		= &at91rm9200_timer,
-+	.map_io		= vlink_map_io,
-+	.init_irq	= vlink_init_irq,
-+	.init_machine	= vlink_board_init,
-+MACHINE_END
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Kconfig	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Kconfig	2007-05-28 13:11:45.000000000 +0200
-@@ -96,6 +96,12 @@
- 	help
- 	  Select this if you are using Promwad's Chub board.
- 
-+config MACH_VLINK
-+	bool "Figment Design Labs VersaLink"
-+	depends on ARCH_AT91RM9200
-+	help
-+		Select this if you are using FDL's VersaLink board
-+
- endif
- 
- # ----------------------------------------------------------
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Makefile	2007-05-28 13:13:15.000000000 +0200
-@@ -29,6 +29,7 @@
- obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
- obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
- obj-$(CONFIG_MACH_CHUB)		+= board-chub.o
-+obj-$(CONFIG_MACH_VLINK)	+= board-vlink.o
- 
- # AT91SAM9260 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-@@ -51,6 +52,7 @@
- led-$(CONFIG_MACH_CSB637)	+= leds.o
- led-$(CONFIG_MACH_KB9200)	+= leds.o
- led-$(CONFIG_MACH_KAFA)		+= leds.o
-+led-$(CONFIG_MACH_VLINK)	+= leds.o
- obj-$(CONFIG_LEDS) += $(led-y)
- 
- # VGA support
diff --git a/target/linux/at91-2.6/patches-2.6.21/002-led-driver.patch b/target/linux/at91-2.6/patches-2.6.21/002-led-driver.patch
deleted file mode 100644
index e78ed443c0..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/002-led-driver.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c	2007-05-28 13:33:41.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-05-28 14:43:28.000000000 +0200
-@@ -61,7 +61,7 @@
- 	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
- 
- 	/* Setup the LEDs */
--//	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-+	at91_init_leds(AT91_PIN_PC14, AT91_PIN_PC15);
- 
- 	/* Setup the serial ports and console */
- 	at91_init_serial(&vlink_uart_config);
-@@ -81,10 +81,12 @@
- 	.ports		= 1,
- };
- 
-+/*
- static struct at91_udc_data __initdata vlink_udc_data = {
- 	.vbus_pin	= AT91_PIN_PD4,
- 	.pullup_pin	= AT91_PIN_PD5,
- };
-+*/
- 
- static struct at91_mmc_data __initdata vlink_mmc_data = {
- //	.det_pin	= AT91_PIN_PB27,
-@@ -108,18 +110,19 @@
- #endif
- };
- 
--static struct at91_gpio_led vlink_leds[] = {
-+/*static struct at91_gpio_led vlink_leds[] = {
- 	{
- 		.name		= "led0",
--		.gpio		= AT91_PIN_PB1,
-+		.gpio		= AT91_PIN_PC14,
- 		.trigger	= "heartbeat",
- 	},
- 	{
- 		.name		= "led1",
--		.gpio		= AT91_PIN_PB2,
-+		.gpio		= AT91_PIN_PC15,
- 		.trigger	= "timer",
- 	}
- };
-+*/
- 
- static void __init vlink_board_init(void)
- {
-@@ -130,8 +133,8 @@
- 	/* USB Host */
- 	at91_add_device_usbh(&vlink_usbh_data);
- 	/* USB Device */
--	at91_add_device_udc(&vlink_udc_data);
--	at91_set_multi_drive(vlink_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-+//	at91_add_device_udc(&vlink_udc_data);
-+//	at91_set_multi_drive(vlink_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
- 	/* I2C */
- 	at91_add_device_i2c();
- 	/* SPI */
-@@ -145,7 +148,7 @@
- 	at91_add_device_mmc(0, &vlink_mmc_data);
- #endif
- 	/* LEDs */
--	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
-+//	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
- }
- 
- MACHINE_START(VLINK, "FDL VersaLink")
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile linux-2.6.21.1/arch/arm/mach-at91/Makefile
---- linux-2.6.21.1.orig/arch/arm/mach-at91/Makefile	2007-05-28 13:13:15.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/Makefile	2007-05-28 14:19:06.000000000 +0200
-@@ -52,7 +52,7 @@
- led-$(CONFIG_MACH_CSB637)	+= leds.o
- led-$(CONFIG_MACH_KB9200)	+= leds.o
- led-$(CONFIG_MACH_KAFA)		+= leds.o
--led-$(CONFIG_MACH_VLINK)	+= leds.o
-+led-$(CONFIG_MACH_VLINK)	+= vlink_leds.o
- obj-$(CONFIG_LEDS) += $(led-y)
- 
- # VGA support
-diff -urN linux-2.6.21.1.orig/arch/arm/mach-at91/vlink_leds.c linux-2.6.21.1/arch/arm/mach-at91/vlink_leds.c
---- linux-2.6.21.1.orig/arch/arm/mach-at91/vlink_leds.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/arch/arm/mach-at91/vlink_leds.c	2007-05-28 14:41:03.000000000 +0200
-@@ -0,0 +1,105 @@
-+/*
-+ * LED driver for Atmel AT91-based boards.
-+ *
-+ *  Copyright (C) SAN People (Pty) Ltd
-+ *	Modified for FDL VersaLink Copyright (C) Guthrie Consulting
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+*/
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/leds.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/gpio.h>
-+
-+
-+static inline void at91_led_on(unsigned int led)
-+{
-+	at91_set_gpio_value(led, 0);
-+}
-+
-+static inline void at91_led_off(unsigned int led)
-+{
-+	at91_set_gpio_value(led, 1);
-+}
-+
-+static inline void at91_led_toggle(unsigned int led)
-+{
-+	unsigned long is_off = at91_get_gpio_value(led);
-+	if (is_off) {
-+		at91_led_on(led);
-+		at91_led_off(at91_leds_cpu);
-+		}
-+	else {
-+		at91_led_on(at91_leds_cpu);
-+		at91_led_off(led);
-+		}
-+}
-+
-+
-+/*
-+ * Handle LED events.
-+ */
-+
-+/*
-+ * VersaLink has a single bi-coloured LED which changes colour when the
-+ * polarity is reversed
-+ */
-+static void at91_leds_event(led_event_t evt)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+
-+	switch(evt) {
-+	case led_start:		/* System startup */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+
-+	case led_stop:		/* System stop / suspend */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+
-+#ifdef CONFIG_LEDS_TIMER
-+	case led_timer:		/* Every 50 timer ticks */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+#endif
-+
-+#ifdef CONFIG_LEDS_CPU
-+	case led_idle_start:	/* Entering idle state */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+
-+	case led_idle_end:	/* Exit idle state */
-+		at91_led_toggle(at91_leds_timer);
-+		break;
-+#endif
-+
-+	default:
-+		break;
-+	}
-+
-+	local_irq_restore(flags);
-+}
-+
-+
-+static int __init leds_init(void)
-+{
-+	if (!at91_leds_timer || !at91_leds_cpu)
-+		return -ENODEV;
-+
-+	leds_event = at91_leds_event;
-+
-+	leds_event(led_start);
-+	return 0;
-+}
-+
-+__initcall(leds_init);
diff --git a/target/linux/at91-2.6/patches-2.6.21/003-gpio-driver.patch b/target/linux/at91-2.6/patches-2.6.21/003-gpio-driver.patch
deleted file mode 100644
index aa5a2e32e1..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/003-gpio-driver.patch
+++ /dev/null
@@ -1,355 +0,0 @@
---- linux-2.6.21.1.orig/arch/arm/mach-at91/gpio.c	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/gpio.c	2007-05-28 15:30:48.000000000 +0200
-@@ -27,6 +27,7 @@
- 
- static struct at91_gpio_bank *gpio;
- static int gpio_banks;
-+static u32 pio_gpio_pin[4] = { 0, 0, 0, 0 };
- 
- 
- static inline void __iomem *pin_to_controller(unsigned pin)
-@@ -71,9 +72,13 @@
- {
- 	void __iomem	*pio = pin_to_controller(pin);
- 	unsigned	mask = pin_to_mask(pin);
-+	int bank = (pin - PIN_BASE) / 32;
- 
- 	if (!pio)
- 		return -EINVAL;
-+
-+	pio_gpio_pin[bank] |= mask;
-+
- 	__raw_writel(mask, pio + PIO_IDR);
- 	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- 	__raw_writel(mask, pio + PIO_PER);
-@@ -130,10 +135,13 @@
- {
- 	void __iomem	*pio = pin_to_controller(pin);
- 	unsigned	mask = pin_to_mask(pin);
-+	int bank = (pin - PIN_BASE) / 32;
- 
- 	if (!pio)
- 		return -EINVAL;
- 
-+	pio_gpio_pin[bank] |= mask;
-+
- 	__raw_writel(mask, pio + PIO_IDR);
- 	__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- 	__raw_writel(mask, pio + PIO_ODR);
-@@ -151,10 +159,13 @@
- {
- 	void __iomem	*pio = pin_to_controller(pin);
- 	unsigned	mask = pin_to_mask(pin);
-+	int bank = (pin - PIN_BASE) / 32;
- 
- 	if (!pio)
- 		return -EINVAL;
- 
-+	pio_gpio_pin[bank] |= mask;
-+
- 	__raw_writel(mask, pio + PIO_IDR);
- 	__raw_writel(mask, pio + PIO_PUDR);
- 	__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
-@@ -262,6 +273,18 @@
- }
- EXPORT_SYMBOL(at91_get_gpio_value);
- 
-+int at91_is_pin_gpio(unsigned pin)
-+{
-+  void __iomem  *pio = pin_to_controller(pin);
-+  unsigned  mask = pin_to_mask(pin);
-+  int     bank = (pin - PIN_BASE) / 32;
-+
-+  if (!pio)
-+    return -EINVAL;
-+  return (pio_gpio_pin[bank] & mask) != 0;
-+}
-+EXPORT_SYMBOL(at91_is_pin_gpio);
-+
- /*--------------------------------------------------------------------------*/
- 
- #ifdef CONFIG_PM
---- linux-2.6.21.1.orig/drivers/char/Kconfig	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/char/Kconfig	2007-05-28 15:37:43.000000000 +0200
-@@ -1087,5 +1087,12 @@
- 	  The SPI driver gives user mode access to this serial
- 	  bus on the AT91RM9200 processor.
- 
-+config AT91_VLIO
-+  tristate "Versalink LED and GPIO interface"
-+  depends on ARCH_AT91RM9200 && MACH_VLINK
-+  default n
-+  help
-+    Provides a handler GPIO's in userspace
-+
- endmenu
- 
---- linux-2.6.21.1.orig/drivers/char/Makefile	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/char/Makefile	2007-05-28 15:38:11.000000000 +0200
-@@ -95,6 +95,7 @@
- obj-$(CONFIG_TELCLOCK)		+= tlclk.o
- obj-$(CONFIG_AT91_SPI)		+= at91_spi.o
- obj-$(CONFIG_AT91_SPIDEV)	+= at91_spidev.o
-+obj-$(CONFIG_AT91_VLIO)  += vlink_giu.o
- 
- obj-$(CONFIG_WATCHDOG)		+= watchdog/
- obj-$(CONFIG_MWAVE)		+= mwave/
---- linux-2.6.21.1.orig/drivers/char/vlink_giu.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1/drivers/char/vlink_giu.c	2007-05-28 15:39:47.000000000 +0200
-@@ -0,0 +1,256 @@
-+/*
-+ *  Driver for FDL Versalink GPIO
-+ *
-+ *  Copyright (C) 2005 Guthrie Consulting
-+ *	Author: Hamish Guthrie <hamish@prodigi.ch>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify
-+ *  it under the terms of the GNU General Public License as published by
-+ *  the Free Software Foundation; either version 2 of the License, or
-+ *  (at your option) any later version.
-+ *
-+ *  This program is distributed in the hope that it will be useful,
-+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *  GNU General Public License for more details.
-+ *
-+ *  You should have received a copy of the GNU General Public License
-+ *  along with this program; if not, write to the Free Software
-+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/fs.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/proc_fs.h>
-+#include <linux/fcntl.h>
-+#include <linux/seq_file.h>
-+#include <linux/cdev.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/uaccess.h>
-+
-+static int major;	/* default is dynamic major device number */
-+module_param(major, int, 0);
-+MODULE_PARM_DESC(major, "Major device number");
-+
-+#define VIO_NR_DEVS 96
-+
-+struct vio_dev {
-+	struct cdev cdev;
-+};
-+
-+struct vio_dev *vio_devices;
-+static struct class *vio_class;
-+
-+static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
-+                         loff_t *ppos)
-+{
-+	unsigned int pin;
-+	int retval;
-+	char value = '0';
-+
-+	pin = iminor(file->f_dentry->d_inode);
-+
-+	retval = at91_get_gpio_value(PIN_BASE + pin);
-+	if (retval < 0)
-+		return -EFAULT;
-+
-+	value = retval + 0x30;
-+	if (put_user(value, buf))
-+		return -EFAULT;
-+
-+	return 1;
-+}
-+
-+static ssize_t gpio_write(struct file *file, const char __user *data,
-+                          size_t len, loff_t *ppos)
-+{
-+	unsigned int pin;
-+	size_t i;
-+	char c;
-+	int retval = 0;
-+
-+	pin = iminor(file->f_dentry->d_inode);
-+
-+	for (i = 0; i < len; i++) {
-+		if (get_user(c, data + i))
-+			return -EFAULT;
-+
-+		switch (c) {
-+		case '0':
-+		case '1':
-+			retval = at91_set_gpio_value(PIN_BASE + pin, (int)c - 0x30);
-+			if (retval < 0)
-+				return -EFAULT;
-+			break;
-+		default:
-+			break;
-+		}
-+
-+		if (retval < 0)
-+			break;
-+	}
-+
-+	return i;
-+}
-+
-+static int gpio_open(struct inode *inode, struct file *file)
-+{
-+	return nonseekable_open(inode, file);
-+}
-+
-+static int gpio_release(struct inode *inode, struct file *file)
-+{
-+	return 0;
-+}
-+
-+static struct file_operations vio_fops = {
-+	.owner		= THIS_MODULE,
-+	.read		= gpio_read,
-+	.write		= gpio_write,
-+	.open		= gpio_open,
-+	.release	= gpio_release,
-+};
-+
-+static void vio_setup_cdev(struct vio_dev *dev, int index)
-+{
-+	int err, devno = MKDEV(major, index);
-+
-+	cdev_init(&dev->cdev, &vio_fops);
-+	dev->cdev.owner = THIS_MODULE;
-+	dev->cdev.ops = &vio_fops;
-+	err = cdev_add (&dev->cdev, devno, 1);
-+	if (err)
-+		printk(KERN_NOTICE "vio: Error %d adding vio%d", err, index);
-+}
-+
-+static int vio_remove(struct platform_device *dev)
-+{
-+	int i;
-+	dev_t devno = MKDEV(major, 0);
-+
-+	if (vio_devices) {
-+		for(i=0; i<VIO_NR_DEVS; i++) {
-+			int iodev = at91_is_pin_gpio(PIN_BASE + i);
-+			if (iodev) {
-+				cdev_del(&vio_devices[i].cdev);
-+				class_device_destroy(vio_class, MKDEV(major, i));
-+			}
-+		}
-+		kfree(vio_devices);
-+	}
-+
-+	class_destroy(vio_class);
-+	unregister_chrdev_region(devno, VIO_NR_DEVS);
-+
-+	platform_set_drvdata(dev, NULL);
-+
-+	return 0;
-+}
-+
-+static int vio_probe(struct platform_device *dev)
-+{
-+	int retval, i, j;
-+	dev_t vdev = 0;
-+
-+	if (major) {
-+		vdev = MKDEV(major, 0);
-+		retval = register_chrdev_region(vdev, VIO_NR_DEVS, "vio");
-+	} else {
-+		retval = alloc_chrdev_region(&vdev, 0, VIO_NR_DEVS, "vio");
-+		major = MAJOR(vdev);
-+	}
-+	if (retval < 0) {
-+		printk(KERN_WARNING "vio: can't get major %d\n", major);
-+		return retval;
-+	}
-+
-+	if (major == 0) {
-+		major = retval;
-+		printk(KERN_INFO "vio: major number %d\n", major);
-+	}
-+
-+	vio_class = class_create(THIS_MODULE, "vio");
-+
-+	if (IS_ERR(vio_class)) {
-+		printk(KERN_ERR "vio: Error creating vio class\n");
-+		vio_remove(dev);
-+		return PTR_ERR(vio_class);
-+	}
-+
-+	vio_devices = kmalloc(VIO_NR_DEVS * sizeof(struct vio_dev), GFP_KERNEL);
-+	if (!vio_devices) {
-+		retval = -ENOMEM;
-+		goto fail;
-+	}
-+	memset(vio_devices, 0, VIO_NR_DEVS * sizeof(struct vio_dev));
-+
-+	for (i=0; i<VIO_NR_DEVS/32; i++)
-+		for(j=0; j<32; j++) {
-+			int iodev = at91_is_pin_gpio(PIN_BASE + i*32 + j);
-+			if (iodev) {
-+				vio_setup_cdev(&vio_devices[i*32 + j], i*32 + j);
-+				class_device_create(vio_class, NULL, MKDEV(major, i*32 + j), NULL,
-+					"vio%c%d", i + 'A', j);
-+			}
-+		}
-+
-+	platform_set_drvdata(dev, vio_devices);
-+
-+	return 0;
-+
-+fail:
-+	vio_remove(dev);
-+	return retval;
-+}
-+
-+static struct platform_device *vio_platform_device;
-+
-+static struct platform_driver vio_driver = {
-+	.probe 		= vio_probe,
-+	.remove		= vio_remove,
-+	.driver		= {
-+		.name	= "vio",
-+		.owner	= THIS_MODULE,
-+	},
-+};
-+
-+static int __init vio_init(void)
-+{
-+	int retval;
-+
-+	vio_platform_device = platform_device_register_simple("vio", -1, NULL, 0);
-+	if (IS_ERR(vio_platform_device)) {
-+		printk(KERN_WARNING "vio: device registration failed\n");
-+		return PTR_ERR(vio_platform_device);
-+	}
-+
-+	retval = platform_driver_register(&vio_driver);
-+	if (retval < 0) {
-+		printk(KERN_WARNING "vio: driver registration failed\n");
-+		platform_device_unregister(vio_platform_device);
-+	}
-+	
-+	return retval;
-+}
-+
-+static void __exit vio_exit(void)
-+{
-+	platform_driver_unregister(&vio_driver);
-+	platform_device_unregister(vio_platform_device);
-+}
-+
-+module_init(vio_init);
-+module_exit(vio_exit);
-+
-+MODULE_AUTHOR("Hamish Guthrie <hamish@prodigi.ch>");
-+MODULE_DESCRIPTION("FDL Versalink GPIO Driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/at91-2.6/patches-2.6.21/006-change-gpios.patch b/target/linux/at91-2.6/patches-2.6.21/006-change-gpios.patch
deleted file mode 100644
index 97a4a8d2f5..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/006-change-gpios.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- linux-2.6.21.1.orig/arch/arm/mach-at91/board-vlink.c	2007-05-28 15:53:31.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-05-28 15:58:46.000000000 +0200
-@@ -149,6 +149,33 @@
- #endif
- 	/* LEDs */
- //	at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
-+
-+/* Other LED's */
-+       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
-+       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
-+       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
-+       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
-+       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
-+       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
-+
-+/* SIM Cards */
-+       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3
-+       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
-+       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
-+
-+/* GSM Module Control */
-+       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
-+
-+/* Test jig presence detection */
-+       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
-+
-+/* Power indicator */
-+       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
-+
-+/* USB Device control */
-+       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
-+       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
-+
- }
- 
- MACHINE_START(VLINK, "FDL VersaLink")
diff --git a/target/linux/at91-2.6/patches-2.6.21/007-mtd-partition.patch b/target/linux/at91-2.6/patches-2.6.21/007-mtd-partition.patch
deleted file mode 100644
index 98bec0dad8..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/007-mtd-partition.patch
+++ /dev/null
@@ -1,36 +0,0 @@
---- linux-2.6.21.1.orig/drivers/mtd/devices/at91_dataflash.c	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/devices/at91_dataflash.c	2007-05-28 16:10:21.000000000 +0200
-@@ -173,7 +173,7 @@
- };
- #endif
- 
--static const char *part_probes[] = { "cmdlinepart", NULL, };
-+static const char *part_probes[] = { "cmdlinepart", "at91part", NULL, };
- 
- #endif
- 
---- linux-2.6.21.1.orig/drivers/mtd/Kconfig	2007-05-28 12:22:09.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/Kconfig	2007-05-28 16:09:16.000000000 +0200
-@@ -157,6 +157,12 @@
- 	  for your particular device. It won't happen automatically. The
- 	  'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example.
- 
-+config MTD_AT91_PARTS
-+ tristate "Atmel AT91 partitioning support"
-+ depends on MTD_PARTITIONS && ARCH_AT91RM9200 && AT91_SPI
-+ ---help---
-+   Atmel AT91 partitioning support
-+
- comment "User Modules And Translation Layers"
- 	depends on MTD
- 
---- linux-2.6.21.1.orig/drivers/mtd/Makefile	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1/drivers/mtd/Makefile	2007-05-28 16:09:55.000000000 +0200
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
-+obj-$(CONFIG_MTD_AT91_PARTS) += at91part.o
- 
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
diff --git a/target/linux/at91-2.6/patches-2.6.21/008-fdl-serial.patch b/target/linux/at91-2.6/patches-2.6.21/008-fdl-serial.patch
deleted file mode 100644
index 42589197be..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/008-fdl-serial.patch
+++ /dev/null
@@ -1,160 +0,0 @@
---- linux-2.6.21.1.orig/drivers/serial/atmel_serial.c	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/drivers/serial/atmel_serial.c	2007-05-28 16:39:09.000000000 +0200
-@@ -174,7 +174,35 @@
- 				at91_set_gpio_value(AT91_PIN_PA21, 0);
- 			else
- 				at91_set_gpio_value(AT91_PIN_PA21, 1);
-+
-+      /*
-+       * FDL VersaLink adds GPIOS to provide full modem control on
-+       * USART 0 - Drive DTR and RI pins manually
-+       */
-+      if (mctrl & TIOCM_DTR)
-+        at91_set_gpio_value(AT91_PIN_PB6, 0);
-+      else
-+        at91_set_gpio_value(AT91_PIN_PB6, 1);
-+      if (mctrl & TIOCM_RI)
-+        at91_set_gpio_value(AT91_PIN_PB7, 0);
-+      else
-+        at91_set_gpio_value(AT91_PIN_PB7, 1);
- 		}
-+
-+    /*
-+     * FDL VersaLink adds GPIOS to provide full modem control on
-+     * USART 3 - Drive DTR and RI pins manually
-+     */
-+    if (port->mapbase == AT91RM9200_BASE_US3) {
-+      if (mctrl & TIOCM_DTR)
-+        at91_set_gpio_value(AT91_PIN_PB29, 0);
-+      else
-+        at91_set_gpio_value(AT91_PIN_PB29, 1);
-+      if (mctrl & TIOCM_RI)
-+        at91_set_gpio_value(AT91_PIN_PB2, 0);
-+      else
-+        at91_set_gpio_value(AT91_PIN_PB2, 1);
-+    }
- 	}
- #endif
- 
-@@ -211,8 +239,10 @@
- 	/*
- 	 * The control signals are active low.
- 	 */
--	if (!(status & ATMEL_US_DCD))
--		ret |= TIOCM_CD;
-+
-+  if (!(port->mapbase == AT91RM9200_BASE_US0 || port->mapbase == AT91RM9200_BASE_US3))
-+		if (!(status & ATMEL_US_DCD))
-+			ret |= TIOCM_CD;
- 	if (!(status & ATMEL_US_CTS))
- 		ret |= TIOCM_CTS;
- 	if (!(status & ATMEL_US_DSR))
-@@ -220,6 +250,16 @@
- 	if (!(status & ATMEL_US_RI))
- 		ret |= TIOCM_RI;
- 
-+  /*
-+   * Read the GPIO's for the FDL VersaLink special case
-+   */
-+  if (port->mapbase == AT91RM9200_BASE_US0)
-+    if (!(at91_get_gpio_value(AT91_PIN_PA19)))
-+      ret |= TIOCM_CD;
-+  if (port->mapbase == AT91RM9200_BASE_US3)
-+    if (!(at91_get_gpio_value(AT91_PIN_PA24)))
-+      ret |= TIOCM_CD;
-+
- 	return ret;
- }
- 
-@@ -511,6 +551,34 @@
- }
- 
- /*
-+ * USART0 DCD Interrupt handler
-+ */
-+
-+static irqreturn_t atmel_u0_DCD_interrupt(int irq, void *dev_id)
-+{
-+  struct uart_port *port = dev_id;
-+  int status = at91_get_gpio_value(irq);
-+
-+  uart_handle_dcd_change(port, !(status));
-+
-+  return IRQ_HANDLED;
-+}
-+
-+/*
-+ * USART3 DCD Interrupt handler
-+ */
-+
-+static irqreturn_t atmel_u3_DCD_interrupt(int irq, void *dev_id)
-+{
-+  struct uart_port *port = dev_id;
-+  int status = at91_get_gpio_value(irq);
-+
-+  uart_handle_dcd_change(port, !(status));
-+
-+  return IRQ_HANDLED;
-+}
-+
-+/*
-  * Interrupt handler
-  */
- static irqreturn_t atmel_interrupt(int irq, void *dev_id)
-@@ -587,6 +655,23 @@
- 		return retval;
- 	}
- 
-+	if (port->mapbase == AT91RM9200_BASE_US0) {
-+		retval = request_irq(AT91_PIN_PA19, atmel_u0_DCD_interrupt, 0, "atmel_serial", port);
-+		if (retval) {
-+			printk("atmel_serial: atmel_startup - Can't get u0DCD irq\n");
-+			free_irq(port->irq, port);
-+			return retval;
-+		}
-+	}
-+	if (port->mapbase == AT91RM9200_BASE_US3) {
-+		retval = request_irq(AT91_PIN_PA24, atmel_u3_DCD_interrupt, 0, "atmel_serial", port);
-+		if (retval) {
-+			printk("atmel_serial: atmel_startup - Can't get u3DCD irq\n");
-+			free_irq(port->irq, port);
-+			return retval;
-+		}
-+	}
-+
- 	/*
- 	 * Initialize DMA (if necessary)
- 	 */
-@@ -603,6 +688,10 @@
- 					kfree(atmel_port->pdc_rx[0].buf);
- 				}
- 				free_irq(port->irq, port);
-+        if (port->mapbase == AT91RM9200_BASE_US0)
-+          free_irq(AT91_PIN_PA19, port);
-+        if (port->mapbase == AT91RM9200_BASE_US3)
-+          free_irq(AT91_PIN_PA24, port);
- 				return -ENOMEM;
- 			}
- 			pdc->dma_addr = dma_map_single(port->dev, pdc->buf, PDC_BUFFER_SIZE, DMA_FROM_DEVICE);
-@@ -636,6 +725,10 @@
- 		retval = atmel_open_hook(port);
- 		if (retval) {
- 			free_irq(port->irq, port);
-+      if (port->mapbase == AT91RM9200_BASE_US0)
-+        free_irq(AT91_PIN_PA19, port);
-+      if (port->mapbase == AT91RM9200_BASE_US3)
-+        free_irq(AT91_PIN_PA24, port);
- 			return retval;
- 		}
- 	}
-@@ -701,6 +794,10 @@
- 	 * Free the interrupt
- 	 */
- 	free_irq(port->irq, port);
-+  if (port->mapbase == AT91RM9200_BASE_US0)
-+    free_irq(AT91_PIN_PA19, port);
-+  if (port->mapbase == AT91RM9200_BASE_US3)
-+    free_irq(AT91_PIN_PA24, port);
- 
- 	/*
- 	 * If there is a specific "close" function (to unregister
diff --git a/target/linux/at91-2.6/patches-2.6.21/009-fdl-uartinit.patch b/target/linux/at91-2.6/patches-2.6.21/009-fdl-uartinit.patch
deleted file mode 100644
index f2491f3496..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/009-fdl-uartinit.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c	2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c	2007-05-28 16:44:36.000000000 +0200
-@@ -618,7 +618,6 @@
- 
- 
- #if defined(CONFIG_NEW_LEDS)
--
- static struct platform_device at91_leds = {
- 	.name		= "at91_leds",
- 	.id		= -1,
-@@ -724,6 +723,10 @@
- 	 *  We need to drive the pin manually.  Default is off (RTS is active low).
- 	 */
- 	at91_set_gpio_output(AT91_PIN_PA21, 1);
-+	at91_set_gpio_output(AT91_PIN_PB6, 1);  /* DTR0 */
-+	at91_set_gpio_output(AT91_PIN_PB7, 1);  /* RI0 */
-+	at91_set_gpio_input(AT91_PIN_PA19, 1);  /* DCD0 */
-+	at91_set_deglitch(AT91_PIN_PA19, 1);
- }
- 
- static struct resource uart1_resources[] = {
-@@ -835,6 +838,12 @@
- {
- 	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
- 	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
-+	at91_set_B_periph(AT91_PIN_PB0, 0);   /* RTS3 */
-+	at91_set_B_periph(AT91_PIN_PB1, 0);   /* CTS3 */
-+	at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
-+	at91_set_gpio_output(AT91_PIN_PB2, 1);  /* RI0 */
-+	at91_set_gpio_input(AT91_PIN_PA24, 1);  /* DCD0 */
-+	at91_set_deglitch(AT91_PIN_PA24, 1);
- }
- 
- struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
diff --git a/target/linux/at91-2.6/patches-2.6.21/010-dm9161a-phyfix.patch b/target/linux/at91-2.6/patches-2.6.21/010-dm9161a-phyfix.patch
deleted file mode 100644
index 9ad8c42530..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/010-dm9161a-phyfix.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- linux-2.6.21.1/drivers/net/arm/at91_ether.c.old	2007-06-04 18:15:49.000000000 +0200
-+++ linux-2.6.21.1/drivers/net/arm/at91_ether.c	2007-06-04 18:10:36.000000000 +0200
-@@ -146,6 +146,7 @@
- 	struct at91_private *lp = netdev_priv(dev);
- 	unsigned int bmsr, bmcr, lpa, mac_cfg;
- 	unsigned int speed, duplex;
-+	unsigned long timeout = jiffies + HZ;
- 
- 	if (!mii_link_ok(&lp->mii)) {		/* no link */
- 		netif_carrier_off(dev);
-@@ -158,8 +159,15 @@
- 	read_phy(lp->phy_address, MII_BMSR, &bmsr);
- 	read_phy(lp->phy_address, MII_BMCR, &bmcr);
- 	if (bmcr & BMCR_ANENABLE) {				/* AutoNegotiation is enabled */
--		if (!(bmsr & BMSR_ANEGCOMPLETE))
--			return;			/* Do nothing - another interrupt generated when negotiation complete */
-+		while (!(bmsr & BMSR_ANEGCOMPLETE)) {
-+			if (time_after(jiffies, timeout)) {
-+				printk("at91_ether: Auto-negotiate timeout\n");
-+				return;
-+			}
-+			read_phy(lp->phy_address, MII_BMSR, &bmsr);
-+			read_phy(lp->phy_address, MII_BMCR, &bmcr);
-+			cpu_relax();
-+		}
- 
- 		read_phy(lp->phy_address, MII_LPA, &lpa);
- 		if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
diff --git a/target/linux/at91-2.6/patches-2.6.21/011-vlink-resetfix.patch b/target/linux/at91-2.6/patches-2.6.21/011-vlink-resetfix.patch
deleted file mode 100644
index 78ff38481e..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/011-vlink-resetfix.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- linux-2.6.21.1.old/arch/arm/mach-at91/board-vlink.c	2007-06-04 15:45:19.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/board-vlink.c	2007-06-05 05:27:19.000000000 +0200
-@@ -175,6 +175,7 @@
- /* USB Device control */
-        at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
-        at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
-+			 at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
- 
- }
- 
diff --git a/target/linux/at91-2.6/patches-2.6.21/012-at91-mmcfix.patch b/target/linux/at91-2.6/patches-2.6.21/012-at91-mmcfix.patch
deleted file mode 100644
index e8991ae614..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/012-at91-mmcfix.patch
+++ /dev/null
@@ -1,424 +0,0 @@
---- linux-2.6.21.1.old/drivers/mmc/at91_mci.c	2007-06-05 09:08:57.000000000 +0200
-+++ linux-2.6.21.1/drivers/mmc/at91_mci.c	2007-06-05 10:59:11.000000000 +0200
-@@ -79,7 +79,8 @@
- 
- #define DRIVER_NAME "at91_mci"
- 
--#undef	SUPPORT_4WIRE
-+//#undef	SUPPORT_4WIRE
-+#define 	SUPPORT_4WIRE
- 
- #define FL_SENT_COMMAND	(1 << 0)
- #define FL_SENT_STOP	(1 << 1)
-@@ -132,7 +133,7 @@
- /*
-  * Copy from sg to a dma block - used for transfers
-  */
--static inline void at91mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
-+static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data *data)
- {
- 	unsigned int len, i, size;
- 	unsigned *dmabuf = host->buffer;
-@@ -181,7 +182,7 @@
- /*
-  * Prepare a dma read
-  */
--static void at91mci_pre_dma_read(struct at91mci_host *host)
-+static void at91_mci_pre_dma_read(struct at91mci_host *host)
- {
- 	int i;
- 	struct scatterlist *sg;
-@@ -249,23 +250,24 @@
- /*
-  * Handle after a dma read
-  */
--static void at91mci_post_dma_read(struct at91mci_host *host)
-+static int at91_mci_post_dma_read(struct at91mci_host *host)
- {
- 	struct mmc_command *cmd;
- 	struct mmc_data *data;
-+	int completed = 0;
- 
- 	pr_debug("post dma read\n");
- 
- 	cmd = host->cmd;
- 	if (!cmd) {
- 		pr_debug("no command\n");
--		return;
-+		return 1;
- 	}
- 
- 	data = cmd->data;
- 	if (!data) {
- 		pr_debug("no data\n");
--		return;
-+		return 1;
- 	}
- 
- 	while (host->in_use_index < host->transfer_index) {
-@@ -300,39 +302,14 @@
- 
- 	/* Is there another transfer to trigger? */
- 	if (host->transfer_index < data->sg_len)
--		at91mci_pre_dma_read(host);
-+		at91_mci_pre_dma_read(host);
- 	else {
-+		at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_ENDRX);
- 		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
--		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
- 	}
- 
- 	pr_debug("post dma read done\n");
--}
--
--/*
-- * Handle transmitted data
-- */
--static void at91_mci_handle_transmitted(struct at91mci_host *host)
--{
--	struct mmc_command *cmd;
--	struct mmc_data *data;
--
--	pr_debug("Handling the transmit\n");
--
--	/* Disable the transfer */
--	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
--
--	/* Now wait for cmd ready */
--	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
--	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
--
--	cmd = host->cmd;
--	if (!cmd) return;
--
--	data = cmd->data;
--	if (!data) return;
--
--	data->bytes_xfered = host->total_length;
-+	return completed;
- }
- 
- /*
-@@ -340,10 +317,17 @@
-  */
- static void at91_mci_enable(struct at91mci_host *host)
- {
-+	unsigned int mr;
-+
- 	at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN);
- 	at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
- 	at91_mci_write(host, AT91_MCI_DTOR, AT91_MCI_DTOMUL_1M | AT91_MCI_DTOCYC);
--	at91_mci_write(host, AT91_MCI_MR, AT91_MCI_PDCMODE | 0x34a);
-+	mr = AT91_MCI_PDCMODE | 0x34a;
-+
-+	if (cpu_is_at91sam9260() || cpu_is_at91sam9263())
-+		mr |= AT91_MCI_RDPROOF | AT91_MCI_WRPROOF;
-+
-+	at91_mci_write(host, AT91_MCI_MR, mr);
- 
- 	/* use Slot A or B (only one at same time) */
- 	at91_mci_write(host, AT91_MCI_SDCR, host->board->slot_b);
-@@ -359,9 +343,8 @@
- 
- /*
-  * Send a command
-- * return the interrupts to enable
-  */
--static unsigned int at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
-+static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command *cmd)
- {
- 	unsigned int cmdr, mr;
- 	unsigned int block_length;
-@@ -372,8 +355,7 @@
- 
- 	host->cmd = cmd;
- 
--	/* Not sure if this is needed */
--#if 0
-+	/* Needed for leaving busy state before CMD1 */
- 	if ((at91_mci_read(host, AT91_MCI_SR) & AT91_MCI_RTOE) && (cmd->opcode == 1)) {
- 		pr_debug("Clearing timeout\n");
- 		at91_mci_write(host, AT91_MCI_ARGR, 0);
-@@ -383,7 +365,7 @@
- 			pr_debug("Clearing: SR = %08X\n", at91_mci_read(host, AT91_MCI_SR));
- 		}
- 	}
--#endif
-+
- 	cmdr = cmd->opcode;
- 
- 	if (mmc_resp_type(cmd) == MMC_RSP_NONE)
-@@ -440,50 +422,48 @@
- 		at91_mci_write(host, ATMEL_PDC_TCR, 0);
- 		at91_mci_write(host, ATMEL_PDC_TNPR, 0);
- 		at91_mci_write(host, ATMEL_PDC_TNCR, 0);
-+		ier = AT91_MCI_CMDRDY;
-+	} else {
-+		/* zero block length in PDC mode */
-+		mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;
-+		at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
-+
-+		/*
-+		 * Disable the PDC controller
-+		 */
-+		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
- 
--		at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
--		at91_mci_write(host, AT91_MCI_CMDR, cmdr);
--		return AT91_MCI_CMDRDY;
--	}
--
--	mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff;	/* zero block length and PDC mode */
--	at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE);
--
--	/*
--	 * Disable the PDC controller
--	 */
--	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
--
--	if (cmdr & AT91_MCI_TRCMD_START) {
--		data->bytes_xfered = 0;
--		host->transfer_index = 0;
--		host->in_use_index = 0;
--		if (cmdr & AT91_MCI_TRDIR) {
--			/*
--			 * Handle a read
--			 */
--			host->buffer = NULL;
--			host->total_length = 0;
-+		if (cmdr & AT91_MCI_TRCMD_START) {
-+			data->bytes_xfered = 0;
-+			host->transfer_index = 0;
-+			host->in_use_index = 0;
-+			if (cmdr & AT91_MCI_TRDIR) {
-+				/*
-+				 * Handle a read
-+				 */
-+				host->buffer = NULL;
-+				host->total_length = 0;
- 
--			at91mci_pre_dma_read(host);
--			ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
--		}
--		else {
--			/*
--			 * Handle a write
--			 */
--			host->total_length = block_length * blocks;
--			host->buffer = dma_alloc_coherent(NULL,
--						  host->total_length,
--						  &host->physical_address, GFP_KERNEL);
--
--			at91mci_sg_to_dma(host, data);
--
--			pr_debug("Transmitting %d bytes\n", host->total_length);
--
--			at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
--			at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
--			ier = AT91_MCI_TXBUFE;
-+				at91_mci_pre_dma_read(host);
-+				ier = AT91_MCI_ENDRX /* | AT91_MCI_RXBUFF */;
-+			}
-+			else {
-+				/*
-+			 	* Handle a write
-+			 	*/
-+				host->total_length = block_length * blocks;
-+				host->buffer = dma_alloc_coherent(NULL,
-+							host->total_length,
-+							&host->physical_address, GFP_KERNEL);
-+
-+				at91_mci_sg_to_dma(host, data);
-+
-+				pr_debug("Transmitting %d bytes\n", host->total_length);
-+
-+				at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
-+				at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
-+				ier = AT91_MCI_CMDRDY;
-+			}
- 		}
- 	}
- 
-@@ -498,39 +478,24 @@
- 	if (cmdr & AT91_MCI_TRCMD_START) {
- 		if (cmdr & AT91_MCI_TRDIR)
- 			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
--		else
--			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
- 	}
--	return ier;
--}
- 
--/*
-- * Wait for a command to complete
-- */
--static void at91mci_process_command(struct at91mci_host *host, struct mmc_command *cmd)
--{
--	unsigned int ier;
--
--	ier = at91_mci_send_command(host, cmd);
--
--	pr_debug("setting ier to %08X\n", ier);
--
--	/* Stop on errors or the required value */
-+	/* Enable selected interrupts */
- 	at91_mci_write(host, AT91_MCI_IER, AT91_MCI_ERRORS | ier);
- }
- 
- /*
-  * Process the next step in the request
-  */
--static void at91mci_process_next(struct at91mci_host *host)
-+static void at91_mci_process_next(struct at91mci_host *host)
- {
- 	if (!(host->flags & FL_SENT_COMMAND)) {
- 		host->flags |= FL_SENT_COMMAND;
--		at91mci_process_command(host, host->request->cmd);
-+		at91_mci_send_command(host, host->request->cmd);
- 	}
- 	else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) {
- 		host->flags |= FL_SENT_STOP;
--		at91mci_process_command(host, host->request->stop);
-+		at91_mci_send_command(host, host->request->stop);
- 	}
- 	else
- 		mmc_request_done(host->mmc, host->request);
-@@ -539,7 +504,7 @@
- /*
-  * Handle a command that has been completed
-  */
--static void at91mci_completed_command(struct at91mci_host *host)
-+static void at91_mci_completed_command(struct at91mci_host *host)
- {
- 	struct mmc_command *cmd = host->cmd;
- 	unsigned int status;
-@@ -583,7 +548,7 @@
- 	else
- 		cmd->error = MMC_ERR_NONE;
- 
--	at91mci_process_next(host);
-+	at91_mci_process_next(host);
- }
- 
- /*
-@@ -595,7 +560,60 @@
- 	host->request = mrq;
- 	host->flags = 0;
- 
--	at91mci_process_next(host);
-+	at91_mci_process_next(host);
-+}
-+
-+/*
-+ * Handle transmitted data
-+ */
-+static void at91_mci_handle_transmitted(struct at91mci_host *host)
-+{
-+	struct mmc_command *cmd;
-+	struct mmc_data *data;
-+
-+	pr_debug("Handling the transmit\n");
-+
-+	/* Disable the transfer */
-+	at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+
-+	/* Now wait for cmd ready */
-+	at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
-+
-+	cmd = host->cmd;
-+	if (!cmd) return;
-+
-+	data = cmd->data;
-+	if (!data) return;
-+
-+	if (cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK) {
-+		pr_debug("multiple write : wait for BLKE...\n");
-+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
-+	} else
-+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-+
-+	data->bytes_xfered = host->total_length;
-+}
-+
-+
-+/*Handle after command sent ready*/
-+static int at91_mci_handle_cmdrdy(struct at91mci_host *host)
-+{
-+	if (!host->cmd)
-+		return 1;
-+	else if (!host->cmd->data) {
-+		if (host->flags & FL_SENT_STOP) {
-+			/*After multi block write, we mus wait for NOTBUSY*/
-+			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY);
-+		} else return 1;
-+	} else if (host->cmd->data->flags & MMC_DATA_WRITE) {
-+		/*After sending multi-block-write command, start DMA transfer*/
-+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE);
-+		at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE);
-+		at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
-+	}
-+
-+	/* command not completed, have to wait */
-+	return 0;
- }
- 
- /*
-@@ -698,29 +716,33 @@
- 			at91_mci_handle_transmitted(host);
- 		}
- 
-+		if (int_status & AT91_MCI_ENDRX) {
-+			pr_debug("ENDRX\n");
-+			at91_mci_post_dma_read(host);
-+		}
-+
- 		if (int_status & AT91_MCI_RXBUFF) {
- 			pr_debug("RX buffer full\n");
--			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
-+			at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
-+			at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_RXBUFF | AT91_MCI_ENDRX);
-+			completed = 1;
- 		}
- 
- 		if (int_status & AT91_MCI_ENDTX)
- 			pr_debug("Transmit has ended\n");
- 
--		if (int_status & AT91_MCI_ENDRX) {
--			pr_debug("Receive has ended\n");
--			at91mci_post_dma_read(host);
--		}
--
- 		if (int_status & AT91_MCI_NOTBUSY) {
- 			pr_debug("Card is ready\n");
--			at91_mci_write(host, AT91_MCI_IER, AT91_MCI_CMDRDY);
-+			completed = 1;
- 		}
- 
- 		if (int_status & AT91_MCI_DTIP)
- 			pr_debug("Data transfer in progress\n");
- 
--		if (int_status & AT91_MCI_BLKE)
-+		if (int_status & AT91_MCI_BLKE) {
- 			pr_debug("Block transfer has ended\n");
-+			completed = 1;
-+		}
- 
- 		if (int_status & AT91_MCI_TXRDY)
- 			pr_debug("Ready to transmit\n");
-@@ -730,14 +752,14 @@
- 
- 		if (int_status & AT91_MCI_CMDRDY) {
- 			pr_debug("Command ready\n");
--			completed = 1;
-+			completed = at91_mci_handle_cmdrdy(host);
- 		}
- 	}
- 
- 	if (completed) {
- 		pr_debug("Completed command\n");
- 		at91_mci_write(host, AT91_MCI_IDR, 0xffffffff);
--		at91mci_completed_command(host);
-+		at91_mci_completed_command(host);
- 	} else
- 		at91_mci_write(host, AT91_MCI_IDR, int_status);
- 
diff --git a/target/linux/at91-2.6/patches-2.6.21/013-at91-mmc1wire.patch b/target/linux/at91-2.6/patches-2.6.21/013-at91-mmc1wire.patch
deleted file mode 100644
index 31b1e96776..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/013-at91-mmc1wire.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- linux-2.6.21.1.old/drivers/mmc/at91_mci.c	2007-06-05 11:08:39.000000000 +0200
-+++ linux-2.6.21.1/drivers/mmc/at91_mci.c	2007-06-05 11:28:40.000000000 +0200
-@@ -79,8 +79,7 @@
- 
- #define DRIVER_NAME "at91_mci"
- 
--//#undef	SUPPORT_4WIRE
--#define 	SUPPORT_4WIRE
-+#undef	SUPPORT_4WIRE
- 
- #define FL_SENT_COMMAND	(1 << 0)
- #define FL_SENT_STOP	(1 << 1)
diff --git a/target/linux/at91-2.6/patches-2.6.21/014-initpartition.patch b/target/linux/at91-2.6/patches-2.6.21/014-initpartition.patch
deleted file mode 100644
index 7e78e6487a..0000000000
--- a/target/linux/at91-2.6/patches-2.6.21/014-initpartition.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- linux-2.6.21.5.old/drivers/mtd/devices/at91_dataflash.c	2007-06-13 13:31:24.000000000 +0200
-+++ linux-2.6.21.5/drivers/mtd/devices/at91_dataflash.c	2007-06-19 12:49:48.000000000 +0200
-@@ -161,12 +161,12 @@
- 		.mask_flags	= MTD_WRITEABLE,	/* read-only */
- 	},
- 	{
--		.name		= "kernel",
-+		.name		= "knlroot",
- 		.offset		= MTDPART_OFS_NXTBLK,
--		.size		= 5 * 32 * 8 * 1056,	/* 5 sectors */
-+		.size		= 0x320400,	/* 5 sectors */
- 	},
- 	{
--		.name		= "filesystem",
-+		.name		= "jffs2",
- 		.offset		= MTDPART_OFS_NXTBLK,
- 		.size		= MTDPART_SIZ_FULL,	/* rest = 26 sectors */
- 	}