diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2019-07-11 14:41:08 +0900 |
|---|---|---|
| committer | Chuanhong Guo <gch981213@gmail.com> | 2019-09-25 14:44:36 +0800 |
| commit | 12ab6ef5c377e9d4aa8f0758ca92056da7eea0bf (patch) | |
| tree | 8b00dfdb3e70fc5240b5088c8a0677cc34087d7e /target/linux/armvirt/config-4.14 | |
| parent | c1394dabf6547dbc25e9563ef980aed9589479ab (diff) | |
| download | upstream-12ab6ef5c377e9d4aa8f0758ca92056da7eea0bf.tar.gz upstream-12ab6ef5c377e9d4aa8f0758ca92056da7eea0bf.tar.bz2 upstream-12ab6ef5c377e9d4aa8f0758ca92056da7eea0bf.zip | |
ramips: add support for I-O DATA WNPR2600G
I-O DATA WNPR2600G is a 2.4/5 GHz band 11ac router, based on MediaTek
MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : SPI-NOR 16 MiB
- WLAN : 2.4/5 GHz 4T4R
- 2.4 GHz : MediaTek MT7615
- 5 GHz : MediaTek MT7615
- Ethernet : 10/100/1000 Mbps
- Switch : MT7530 (SoC)
- LED/keys : 4x/3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J1: Vcc, RX, GND, TX from SoC side
- 57600n8
Flash instruction using factory image:
1. Boot WNPR2600G normaly
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt factory image and click update ("更新") button
to perform firmware update
4. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/armvirt/config-4.14')
0 files changed, 0 insertions, 0 deletions