kernel: refresh patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43564 3c298f89-4303-0410-b956-a3cf2f4a3e73

8 files changed, 16 insertions, 21 deletions

diff --git a/target/linux/ar7/patches-3.14/001-mips-ar7-fix-serial.patch b/target/linux/ar7/patches-3.14/001-mips-ar7-fix-serial.patch
index 3b94cebff9..6896352266 100644
--- a/target/linux/ar7/patches-3.14/001-mips-ar7-fix-serial.patch
+++ b/target/linux/ar7/patches-3.14/001-mips-ar7-fix-serial.patch
@@ -11,11 +11,9 @@ Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
  arch/mips/ar7/platform.c | 1 +
  1 file changed, 1 insertion(+)
 
-diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
-index 7e2356f..e4f47d3 100644
 --- a/arch/mips/ar7/platform.c
 +++ b/arch/mips/ar7/platform.c
-@@ -581,6 +581,7 @@ static int __init ar7_register_uarts(void)
+@@ -581,6 +581,7 @@ static int __init ar7_register_uarts(voi
  	uart_port.type		= PORT_AR7;
  	uart_port.uartclk	= clk_get_rate(bus_clk) / 2;
  	uart_port.iotype	= UPIO_MEM32;
@@ -23,6 +21,3 @@ index 7e2356f..e4f47d3 100644
  	uart_port.regshift	= 2;
  
  	uart_port.line		= 0;
--- 
-1.8.5.3.2.g3dbf181
-
diff --git a/target/linux/ar7/patches-3.14/120-gpio_chrdev.patch b/target/linux/ar7/patches-3.14/120-gpio_chrdev.patch
index 15bc6c3efd..beb0052ca1 100644
--- a/target/linux/ar7/patches-3.14/120-gpio_chrdev.patch
+++ b/target/linux/ar7/patches-3.14/120-gpio_chrdev.patch
@@ -1,6 +1,6 @@
 --- a/drivers/char/Kconfig
 +++ b/drivers/char/Kconfig
-@@ -464,6 +464,15 @@ config MWAVE
+@@ -452,6 +452,15 @@ config MWAVE
  	  To compile this driver as a module, choose M here: the
  	  module will be called mwave.
  
@@ -18,7 +18,7 @@
  	depends on SCx200
 --- a/drivers/char/Makefile
 +++ b/drivers/char/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_HW_RANDOM)		+= hw_random/
+@@ -42,6 +42,7 @@ obj-$(CONFIG_HW_RANDOM)		+= hw_random/
  obj-$(CONFIG_PPDEV)		+= ppdev.o
  obj-$(CONFIG_NWBUTTON)		+= nwbutton.o
  obj-$(CONFIG_NWFLASH)		+= nwflash.o
diff --git a/target/linux/ar7/patches-3.14/160-vlynq_try_remote_first.patch b/target/linux/ar7/patches-3.14/160-vlynq_try_remote_first.patch
index 1d1310d82e..841eb2307b 100644
--- a/target/linux/ar7/patches-3.14/160-vlynq_try_remote_first.patch
+++ b/target/linux/ar7/patches-3.14/160-vlynq_try_remote_first.patch
@@ -199,7 +199,7 @@
  		return 0;
  	}
  
-@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct
+@@ -501,24 +547,16 @@ static int __vlynq_enable_device(struct 
  		return result;
  
  	switch (dev->divisor) {
@@ -229,7 +229,7 @@
  		break;
  	case vlynq_ldiv1:
  	case vlynq_ldiv2:
-@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct
+@@ -528,15 +566,12 @@ static int __vlynq_enable_device(struct 
  	case vlynq_ldiv6:
  	case vlynq_ldiv7:
  	case vlynq_ldiv8:
@@ -251,7 +251,7 @@
  			return 0;
  		}
  		break;
-@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct
+@@ -548,20 +583,17 @@ static int __vlynq_enable_device(struct 
  	case vlynq_rdiv6:
  	case vlynq_rdiv7:
  	case vlynq_rdiv8:
diff --git a/target/linux/ar7/patches-3.14/300-add-ac49x-platform.patch b/target/linux/ar7/patches-3.14/300-add-ac49x-platform.patch
index e1b11272df..92bd4f3b8c 100644
--- a/target/linux/ar7/patches-3.14/300-add-ac49x-platform.patch
+++ b/target/linux/ar7/patches-3.14/300-add-ac49x-platform.patch
@@ -37,7 +37,7 @@
  #define AR7_IRQ_UART0	15
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -86,7 +86,7 @@ config AR7
+@@ -89,7 +89,7 @@ config AR7
  	select HAVE_CLK
  	help
  	  Support for the Texas Instruments AR7 System-on-a-Chip
@@ -46,7 +46,7 @@
  
  config ATH79
  	bool "Atheros AR71XX/AR724X/AR913X based boards"
-@@ -839,6 +839,7 @@ config NLM_XLP_BOARD
+@@ -796,6 +796,7 @@ config NLM_XLP_BOARD
  endchoice
  
  source "arch/mips/alchemy/Kconfig"
diff --git a/target/linux/ar7/patches-3.14/320-ac49x-mtd-partitions.patch b/target/linux/ar7/patches-3.14/320-ac49x-mtd-partitions.patch
index f74ee17c39..e6b08d669a 100644
--- a/target/linux/ar7/patches-3.14/320-ac49x-mtd-partitions.patch
+++ b/target/linux/ar7/patches-3.14/320-ac49x-mtd-partitions.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/Kconfig
 +++ b/drivers/mtd/Kconfig
-@@ -192,6 +192,11 @@ config MTD_OF_PARTS
+@@ -169,6 +169,11 @@ config MTD_OF_PARTS
  	  the partition map from the children of the flash node,
  	  as described in Documentation/devicetree/booting-without-of.txt.
  
diff --git a/target/linux/ar7/patches-3.14/500-serial_kludge.patch b/target/linux/ar7/patches-3.14/500-serial_kludge.patch
index e686b765ac..e5d5a914a3 100644
--- a/target/linux/ar7/patches-3.14/500-serial_kludge.patch
+++ b/target/linux/ar7/patches-3.14/500-serial_kludge.patch
@@ -14,7 +14,7 @@
  };
  
  /* Uart divisor latch read */
-@@ -2843,7 +2850,11 @@ static void serial8250_console_putchar(s
+@@ -2861,7 +2868,11 @@ static void serial8250_console_putchar(s
  	struct uart_8250_port *up =
  		container_of(port, struct uart_8250_port, port);
  
diff --git a/target/linux/ar7/patches-3.14/920-ar7part.patch b/target/linux/ar7/patches-3.14/920-ar7part.patch
index 9948858d05..84f68d82ab 100644
--- a/target/linux/ar7/patches-3.14/920-ar7part.patch
+++ b/target/linux/ar7/patches-3.14/920-ar7part.patch
@@ -33,7 +33,7 @@
  	size_t len;
  	unsigned int pre_size = master->erasesize, post_size = 0;
  	unsigned int root_offset = ROOT_OFFSET;
-@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct
+@@ -55,6 +62,16 @@ static int create_mtd_partitions(struct 
  	int retries = 10;
  	struct mtd_partition *ar7_parts;
  
@@ -50,7 +50,7 @@
  	ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
  	if (!ar7_parts)
  		return -ENOMEM;
-@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct
+@@ -83,34 +100,39 @@ static int create_mtd_partitions(struct 
  
  	pre_size = offset;
  
diff --git a/target/linux/ar7/patches-3.14/950-cpmac_titan.patch b/target/linux/ar7/patches-3.14/950-cpmac_titan.patch
index bc31222cb8..1d76e9fd78 100644
--- a/target/linux/ar7/patches-3.14/950-cpmac_titan.patch
+++ b/target/linux/ar7/patches-3.14/950-cpmac_titan.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/ethernet/ti/cpmac.c
 +++ b/drivers/net/ethernet/ti/cpmac.c
-@@ -1155,6 +1155,8 @@ static int cpmac_probe(struct platform_d
+@@ -1154,6 +1154,8 @@ static int cpmac_probe(struct platform_d
  		goto fail;
  	}
  
@@ -9,7 +9,7 @@
  	dev->irq = platform_get_irq_byname(pdev, "irq");
  
  	dev->netdev_ops = &cpmac_netdev_ops;
-@@ -1233,7 +1235,7 @@ int cpmac_init(void)
+@@ -1232,7 +1234,7 @@ int cpmac_init(void)
  	cpmac_mii->reset = cpmac_mdio_reset;
  	cpmac_mii->irq = mii_irqs;
  
@@ -18,7 +18,7 @@
  
  	if (!cpmac_mii->priv) {
  		printk(KERN_ERR "Can't ioremap mdio registers\n");
-@@ -1244,10 +1246,16 @@ int cpmac_init(void)
+@@ -1243,10 +1245,16 @@ int cpmac_init(void)
  #warning FIXME: unhardcode gpio&reset bits
  	ar7_gpio_disable(26);
  	ar7_gpio_disable(27);
@@ -37,7 +37,7 @@
  	cpmac_mii->reset(cpmac_mii);
  
  	for (i = 0; i < 300; i++) {
-@@ -1264,7 +1272,11 @@ int cpmac_init(void)
+@@ -1263,7 +1271,11 @@ int cpmac_init(void)
  		mask = 0;
  	}