Belkin AC 1750 DB (F9K1115v2) support

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734

10 files changed, 292 insertions, 0 deletions

diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 63e1ca6c86..06b96a3a87 100755
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -80,6 +80,9 @@ get_status_led() {
 	el-m150)
 		status_led="easylink:green:system"
 		;;
+	f9k1115v2)
+		status_led="belkin:blue:status"
+		;;
 	gl-inet)
 		status_led="gl-connect:green:lan"
 		;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 9517b97ed1..296ea57f1f 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -87,6 +87,10 @@ eap300v2)
 	ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt"
 	;;
 
+f9k1115v2)
+	ucidef_set_led_usbdev "usb2" "USB2" "belkin:green:usb2" "1-1"
+	;;
+
 rb-750)
 	ucidef_set_led_default "act" "act" "rb750:green:act" "1"
 	ucidef_set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index e205fd514c..b4b6cb3b68 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -98,6 +98,13 @@ tew-673gru)
 	ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
 	;;
 
+f9k1115v2)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	ucidef_add_switch "switch0" "1" "1"
+	ucidef_add_switch_vlan "switch0" "1" "2 3 4 5 6"
+	ucidef_add_switch_vlan "switch0" "2" "0 1"
+	;;
+
 nbg460n_550n_550nh)
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
 	ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 483a8ded87..9b056e9d9a 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -272,6 +272,9 @@ ar71xx_board_detect() {
 	*"Oolite V1.0")
 		name="oolite"
 		;;
+	*"AC1750DB")
+		name="f9k1115v2"
+		;;
 	*"AirGateway")
 		name="airgateway"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 2e5b0dd90a..6dabf4e614 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -181,6 +181,7 @@ platform_check_image() {
 	ap135-020 | \
 	ap96 | \
 	db120 | \
+	f9k1115v2 |\
 	hornet-ub | \
 	bxu2000n-2-a1 | \
 	zcn-1523h-2 | \
diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14
index 9ed184b160..6098af6ff7 100644
--- a/target/linux/ar71xx/config-3.14
+++ b/target/linux/ar71xx/config-3.14
@@ -57,6 +57,7 @@ CONFIG_ATH79_MACH_EL_MINI=y
 CONFIG_ATH79_MACH_ESR1750=y
 CONFIG_ATH79_MACH_ESR900=y
 CONFIG_ATH79_MACH_EW_DORIN=y
+CONFIG_ATH79_MACH_F9K1115V2=y
 CONFIG_ATH79_MACH_GL_INET=y
 CONFIG_ATH79_MACH_GS_OOLITE=y
 CONFIG_ATH79_MACH_HIWIFI_HC6361=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c
new file mode 100644
index 0000000000..69d005d795
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c
@@ -0,0 +1,189 @@
+/*
+ *  Belkin AC1750DB (F9K1115V2) board support
+ *
+ *  Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define F9K1115V2_GPIO_LED_USB2		4
+#define F9K1115V2_GPIO_LED_WPS_AMBER	14
+#define F9K1115V2_GPIO_LED_STATUS_AMBER	15
+#define F9K1115V2_GPIO_LED_WPS_BLUE	19
+#define F9K1115V2_GPIO_LED_STATUS_BLUE	20
+
+#define F9K1115V2_GPIO_BTN_WPS		16
+#define F9K1115V2_GPIO_BTN_RESET	17
+
+#define F9K1115V2_GPIO_USB2_POWER	21
+
+#define F9K1115V2_KEYS_POLL_INTERVAL	20	/* msecs */
+#define F9K1115V2_KEYS_DEBOUNCE_INTERVAL (3 * F9K1115V2_KEYS_POLL_INTERVAL)
+
+#define F9K1115V2_WAN_MAC_OFFSET	0
+#define F9K1115V2_LAN_MAC_OFFSET	6
+#define F9K1115V2_WMAC_CALDATA_OFFSET	0x1000
+#define F9K1115V2_PCIE_CALDATA_OFFSET	0x5000
+
+static struct gpio_led f9k1115v2_leds_gpio[] __initdata = {
+	{
+		.name		= "belkin:amber:status",
+		.gpio		= F9K1115V2_GPIO_LED_STATUS_AMBER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "belkin:blue:status",
+		.gpio		= F9K1115V2_GPIO_LED_STATUS_BLUE,
+		.active_low	= 1,
+	},
+	{
+		.name		= "belkin:blue:wps",
+		.gpio		= F9K1115V2_GPIO_LED_WPS_BLUE,
+		.active_low	= 1,
+	},
+	{
+		.name		= "belkin:amber:wps",
+		.gpio		= F9K1115V2_GPIO_LED_WPS_AMBER,
+		.active_low	= 1,
+	},
+	{
+		.name		= "belkin:green:usb2",
+		.gpio		= F9K1115V2_GPIO_LED_USB2,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_button f9k1115v2_gpio_keys[] __initdata = {
+	{
+		.desc		= "Reset button",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = F9K1115V2_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= F9K1115V2_GPIO_BTN_RESET,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "WPS button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = F9K1115V2_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= F9K1115V2_GPIO_BTN_WPS,
+		.active_low	= 1,
+	},
+};
+
+static struct ar8327_pad_cfg f9k1115v2_ar8327_pad0_cfg = {
+	/* Use the RGMII interface for the GMAC0 of the AR8337 switch */
+	.mode = AR8327_PAD_MAC_RGMII,
+	.txclk_delay_en = true,
+	.rxclk_delay_en = true,
+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_pad_cfg f9k1115v2_ar8327_pad6_cfg = {
+	/* Use the SGMII interface for the GMAC6 of the AR8337 switch */
+	.mode = AR8327_PAD_MAC_SGMII,
+	.rxclk_delay_en = true,
+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_platform_data f9k1115v2_ar8327_data = {
+	.pad0_cfg = &f9k1115v2_ar8327_pad0_cfg,
+	.pad6_cfg = &f9k1115v2_ar8327_pad6_cfg,
+	.port0_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+	.port6_cfg = {
+		.force_link = 1,
+		.speed = AR8327_PORT_SPEED_1000,
+		.duplex = 1,
+		.txpause = 1,
+		.rxpause = 1,
+	},
+};
+
+static struct mdio_board_info f9k1115v2_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &f9k1115v2_ar8327_data,
+	},
+};
+
+static void __init f9k1115v2_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(f9k1115v2_leds_gpio),
+				 f9k1115v2_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, F9K1115V2_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(f9k1115v2_gpio_keys),
+					f9k1115v2_gpio_keys);
+
+	ath79_register_wmac(art + F9K1115V2_WMAC_CALDATA_OFFSET, NULL);
+
+	ath79_register_mdio(0, 0x0);
+	mdiobus_register_board_info(f9k1115v2_mdio0_info,
+				    ARRAY_SIZE(f9k1115v2_mdio0_info));
+
+	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr,
+		       art + F9K1115V2_WAN_MAC_OFFSET, 0);
+
+	ath79_init_mac(ath79_eth1_data.mac_addr,
+		       art + F9K1115V2_LAN_MAC_OFFSET, 0);
+
+	ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+	ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+	/* GMAC0 is connected to the RMGII interface */
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.phy_mask = BIT(0);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+
+	ath79_register_eth(0);
+
+	/* GMAC1 is connected to the SGMII interface */
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+	ath79_eth1_data.speed = SPEED_1000;
+	ath79_eth1_data.duplex = DUPLEX_FULL;
+
+	ath79_register_eth(1);
+
+	ath79_register_pci();
+
+	ath79_register_usb();
+	gpio_request_one(F9K1115V2_GPIO_USB2_POWER,
+			 GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+			 "USB2 power");
+}
+
+MIPS_MACHINE(ATH79_MACH_F9K1115V2, "F9K1115V2", "Belkin AC1750DB",
+	     f9k1115v2_setup);
diff --git a/target/linux/ar71xx/generic/profiles/belkin.mk b/target/linux/ar71xx/generic/profiles/belkin.mk
new file mode 100644
index 0000000000..c8f6bdec4b
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/belkin.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/F9K1115V2
+	NAME:=Belkin AC1750DB (F9K1115V2)
+	PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb3 kmod-ledtrig-usbdev \
+		kmod-ath10k
+endef
+
+define Profile/F9K1115V2/Description
+	Package set optimized for the Belkin AC1750DB (F9K1115V2) board.
+endef
+
+$(eval $(call Profile,F9K1115V2))
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index a057f2acf2..18c9637b0c 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -286,6 +286,7 @@ esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),
 esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
 ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art)
 ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)
+f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
 dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
 dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
 dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
@@ -508,6 +509,30 @@ Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
 Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
 
 
+Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
+Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
+
+define Image/Build/Belkin
+	$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
+	$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
+	$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
+	$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
+	if [ -e "$(call sysupname,$(1),$(2))" ]; then \
+		edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
+			-n "uImage" \
+			-i $(KDIR_TMP)/vmlinux-$(2).uImage \
+			-o $(KDIR_TMP)/$(2)-uImage; \
+		edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
+			-n "rootfs" \
+			-i $(KDIR)/root.$(1) \
+			-o $(KDIR_TMP)/$(2)-rootfs; \
+		( \
+			dd if=$(KDIR_TMP)/$(2)-rootfs; \
+			dd if=$(KDIR_TMP)/$(2)-uImage; \
+		) > "$(call factoryname,$(1),$(2))"; \
+	fi
+endef
+
 define Image/Build/EnGenius
 	$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
 	$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
@@ -1148,6 +1173,8 @@ $(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdl
 $(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
 
+$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
+
 $(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
 $(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
 $(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
diff --git a/target/linux/ar71xx/patches-3.14/734-MIPS-ath79-add-belkin-ac1750db.patch b/target/linux/ar71xx/patches-3.14/734-MIPS-ath79-add-belkin-ac1750db.patch
new file mode 100644
index 0000000000..da7a7d3e6f
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.14/734-MIPS-ath79-add-belkin-ac1750db.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -70,6 +70,7 @@ obj-$(CONFIG_ATH79_MACH_EAP7660D)	+= mac
+ obj-$(CONFIG_ATH79_MACH_EL_M150)	+= mach-el-m150.o
+ obj-$(CONFIG_ATH79_MACH_EL_MINI)	+= mach-el-mini.o
+ obj-$(CONFIG_ATH79_MACH_ESR1750)	+= mach-esr1750.o
++obj-$(CONFIG_ATH79_MACH_F9K1115V2)	+= mach-f9k1115v2.o
+ obj-$(CONFIG_ATH79_MACH_GL_INET)	+= mach-gl-inet.o
+ obj-$(CONFIG_ATH79_MACH_GS_OOLITE)	+= mach-gs-oolite.o
+ obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361)	+= mach-hiwifi-hc6361.o
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -186,6 +186,16 @@ config ATH79_MACH_AW_NR580
+ 	select ATH79_DEV_LEDS_GPIO
+ 	select ATH79_DEV_M25P80
+ 
++config ATH79_MACH_F9K1115V2
++	bool "Belkin AC1750DB board support"
++	select SOC_QCA955X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
+ config ATH79_MACH_ESR1750
+ 	bool "EnGenius ESR1750 board support"
+ 	select SOC_QCA955X
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -59,6 +59,7 @@ enum ath79_mach_type {
+ 	ATH79_MACH_EL_M150,		/* EasyLink EL-M150 */
+ 	ATH79_MACH_EL_MINI,		/* EasyLink EL-MINI */
+ 	ATH79_MACH_ESR1750,		/* EnGenius ESR1750 */
++	ATH79_MACH_F9K1115V2,		/* Belkin AC1750DB */
+ 	ATH79_MACH_GL_INET,		/* GL-CONNECT GL-INET */
+ 	ATH79_MACH_GS_OOLITE,           /* GS OOLITE V1.0 */
+ 	ATH79_MACH_HIWIFI_HC6361,	/* HiWiFi HC6361 */