treewide: use the generic board_name function

Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>

16 files changed, 35 insertions, 45 deletions

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index e5afd50e7d..8eaa892b4a 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -4,11 +4,10 @@
 #
 
 . /lib/functions/uci-defaults.sh
-. /lib/ar71xx.sh
 
 board_config_update
 
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$board" in
 a40)
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 7f2012855c..b2126c0c94 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -5,7 +5,6 @@
 
 . /lib/functions/system.sh
 . /lib/functions/uci-defaults.sh
-. /lib/ar71xx.sh
 
 ar71xx_setup_interfaces()
 {
@@ -545,7 +544,7 @@ ar71xx_setup_macs()
 }
 
 board_config_update
-board=$(ar71xx_board_name)
+board=$(board_name)
 ar71xx_setup_interfaces $board
 ar71xx_setup_macs $board
 board_config_flush
diff --git a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
index 2b18741cd9..add7e47e85 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
@@ -4,11 +4,10 @@
 #
 
 . /lib/functions/uci-defaults.sh
-. /lib/ar71xx.sh
 
 board_config_update
 
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$board" in
 nanostation-m)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 50b893f5b1..1dc48624a0 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -1,11 +1,11 @@
 #!/bin/sh
 # Copyright (C) 2009-2013 OpenWrt.org
 
+. /lib/functions.sh
 . /lib/functions/leds.sh
-. /lib/ar71xx.sh
 
 get_status_led() {
-	local board=$(ar71xx_board_name)
+	local board=$(board_name)
 
 	case $board in
 	a40)
@@ -175,7 +175,7 @@ get_status_led() {
 		status_led="$board:blue:status"
 		;;
 	eap120)
-		status_led="$(ar71xx_board_name):green:system"
+		status_led="$board:green:system"
 		;;
 	eap300v2)
 		status_led="engenius:blue:power"
@@ -516,7 +516,7 @@ set_state() {
 		;;
 	done)
 		status_led_on
-		case $(ar71xx_board_name) in
+		case $(board_name) in
 		gl-ar300m)
 			fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0
 			;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index b4d7817569..f9520b302b 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -2,7 +2,6 @@
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/ar71xx.sh
 . /lib/functions.sh
 . /lib/functions/system.sh
 
@@ -66,7 +65,7 @@ ath9k_patch_firmware_mac() {
 	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=2 count=6
 }
 
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$FIRMWARE" in
 "soc_wmac.eeprom")
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index a2e98f4be7..6a50e0c86e 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -38,11 +38,10 @@ ath10kcal_patch_mac() {
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
-. /lib/ar71xx.sh
 . /lib/functions.sh
 . /lib/functions/system.sh
 
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 7d2eca546d..77c835f2fd 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -6,10 +6,10 @@ PHYNBR=${DEVPATH##*/phy}
 
 [ -n $PHYNBR ] || exit 0
 
-. /lib/ar71xx.sh
+. /lib/functions.sh
 . /lib/functions/system.sh
 
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$board" in
 	archer-c58-v1)
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
index 8c57ddc886..c41d4b08f6 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
@@ -37,9 +37,9 @@ ar922x_disable_gpio_jtag() {
 }
 
 [ $phyname -a $ACTION = "add" ] && {
-	. /lib/ar71xx.sh
+	. /lib/functions.sh
 
-	case $(ar71xx_board_name) in
+	case $(board_name) in
 	wzr-hp-ag300h)
 		ar922x_disable_gpio_jtag $phyname
 		;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
index a99a4ec0b4..338a22297b 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
@@ -5,6 +5,8 @@
 
 SWITCH_NAME_CHANGED=
 
+. /lib/functions.sh
+
 do_change_switch_name() {
 	local config="$1"
 	local option=$2
@@ -25,8 +27,6 @@ migrate_switch_name() {
 	local oldname=$1
 	local newname=$2
 
-	. /lib/functions.sh
-
 	config_load network
 
 	logger -t migrate-switchX "Updating switch names in network configuration"
@@ -40,9 +40,7 @@ migrate_switch_name() {
 	}
 }
 
-. /lib/ar71xx.sh
-
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$board" in
 dir-825-c1|\
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
index 16722d1ab2..d6f7077093 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
@@ -41,9 +41,7 @@ migrate_leds()
 	config_foreach do_led_update_sysfs led "$@"
 }
 
-. /lib/ar71xx.sh
-
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$board" in
 dhp-1565-a1|\
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum
index 057afe0193..2d1afb11cb 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum
@@ -3,9 +3,9 @@
 # Copyright (C) 2010 OpenWrt.org
 #
 
-. /lib/ar71xx.sh
+. /lib/functions.sh
 
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 fixtrx() {
 	mtd -o 32 fixtrx firmware
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header
index ebe9c1c90f..b3857ef07f 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header
@@ -1,6 +1,6 @@
 #!/bin/sh
 
-. /lib/ar71xx.sh
+. /lib/functions.sh
 
 fix_seama_header() {
 	local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
@@ -8,7 +8,7 @@ fix_seama_header() {
 	[ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware
 }
 
-board=$(ar71xx_board_name)
+board=$(board_name)
 
 case "$board" in
 dir-869-a1)
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
index 277287d383..df653f2e48 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
@@ -2,8 +2,6 @@
 # Copyright (C) 2009 OpenWrt.org
 #
 
-. /lib/ar71xx.sh
-
 fetch_mac_from_mtd() {
 	local mtd_part=$1
 	local lan_env=$2
@@ -21,7 +19,9 @@ fetch_mac_from_mtd() {
 }
 
 preinit_set_mac_address() {
-	case $(ar71xx_board_name) in
+	. /lib/functions.sh
+
+	case $(board_name) in
 		c-55|\
 		c-60)
 			mac_lan=$(mtd_get_mac_binary art 0)
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
index d677599d8c..3a98cdccf1 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
@@ -4,10 +4,10 @@
 # Copyright (C) 2009 OpenWrt.org
 #
 
-. /lib/ar71xx.sh
-
 set_preinit_iface() {
-	case $(ar71xx_board_name) in
+	. /lib/functions.sh
+
+	case $(board_name) in
 	alfa-ap96 |\
 	alfa-nx |\
 	ap135-020 |\
diff --git a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
index b6af921449..c9aa4b1eb5 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
+++ b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
@@ -1,8 +1,7 @@
 #!/bin/sh
 
+. /lib/functions.sh
 . /lib/functions/system.sh
-. /lib/ar71xx.sh
-
 
 do_patch_ath10k_firmware() {
 	local firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin"
@@ -25,7 +24,7 @@ do_patch_ath10k_firmware() {
 	# some boards have bogus mac in otp (= directly in the PCIe card's EEPROM).
 	# we have to patch the default mac in the firmware because we cannot change
 	# the otp.
-	case $(ar71xx_board_name) in
+	case $(board_name) in
 		dgl-5500-a1 | tew-823dru)
 			local mac
 			mac=$(mtd_get_mac_ascii nvram wlan1_mac)
@@ -44,7 +43,7 @@ do_patch_ath10k_firmware() {
 }
 
 check_patch_ath10k_firmware() {
-	case $(ar71xx_board_name) in
+	case $(board_name) in
 		dgl-5500-a1 | tew-823dru)
 			do_patch_ath10k_firmware
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index ba65a79006..949cb6aed5 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -184,7 +184,7 @@ alfa_check_image() {
 }
 
 platform_nand_board_name() {
-	local board=$(ar71xx_board_name)
+	local board=$(board_name)
 
 	case "$board" in
 	rb*) echo "routerboard";;
@@ -193,7 +193,7 @@ platform_nand_board_name() {
 }
 
 platform_check_image() {
-	local board=$(ar71xx_board_name)
+	local board=$(board_name)
 	local magic="$(get_magic_word "$1")"
 	local magic_long="$(get_magic_long "$1")"
 
@@ -668,7 +668,7 @@ platform_check_image() {
 }
 
 platform_pre_upgrade() {
-	local board=$(ar71xx_board_name)
+	local board=$(board_name)
 
 	case "$board" in
 	c-60|\
@@ -727,7 +727,7 @@ platform_pre_upgrade() {
 }
 
 platform_nand_pre_upgrade() {
-	local board=$(ar71xx_board_name)
+	local board=$(board_name)
 
 	case "$board" in
 	rb*)
@@ -742,7 +742,7 @@ platform_nand_pre_upgrade() {
 }
 
 platform_do_upgrade() {
-	local board=$(ar71xx_board_name)
+	local board=$(board_name)
 
 	case "$board" in
 	all0258n)