ar71xx: Add eTactica EG-200 support

EG-200 is a DIN rail mountable device with one ethernet port, wifi,
an RS-485 port, and an internal USB attached uSD card reader.

Two leds, "modbus" and "etactica" are managed by userspace applications
in factory firmware.

Flash instruction:
    Original firmware is based on OpenWrt.
    Use sysupgrade image directly in vendor GUI.

Signed-off-by: Karl Palsson <karlp@etactica.com>

12 files changed, 139 insertions, 1 deletions

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index c45376f9e4..6711fb4ce9 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -623,6 +623,12 @@ re450)
 	ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
 	;;
+rme-eg200)
+        ucidef_set_led_netdev "wan" "WAN" "eg200:red:eth0" "eth0"
+        ucidef_set_led_wlan "wlan" "WLAN" "eg200:red:wlan" "phy0tpt"
+        ucidef_set_led_oneshot "modbus" "Modbus" "eg200:red:modbus" "100" "33"
+        ucidef_set_led_default "etactica" "etactica" "eg200:red:etactica" "ignore"
+        ;;
 rocket-m-ti)
 	ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100" "0" "13"
 	ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "26" "100" "-25" "13"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index b208f38b5e..f131b3b633 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -262,7 +262,8 @@ ar71xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "3:wan" "4:lan"
 		;;
-	cap324)
+	cap324|\
+	rme-eg200)
 		ucidef_set_interface_lan "eth0" "dhcp"
 		;;
 	cpe210|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 7c7a0e2674..a255b83802 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -670,6 +670,9 @@ ar71xx_board_detect() {
 	*"ESR900")
 		name="esr900"
 		;;
+	*"eTactica EG-200")
+		name="rme-eg200"
+		;;
 	*"FRITZ!WLAN Repeater 300E")
 		name="fritz300e"
 		;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 946a886071..8f56d1a8f6 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -262,6 +262,7 @@ platform_check_image() {
 	pqi-air-pen|\
 	r36a|\
 	r602n|\
+	rme-eg200|\
 	rocket-m|\
 	rocket-m-ti|\
 	rocket-m-xw|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 447ab01dae..068b83ce8a 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -170,6 +170,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_RBSXTLITE is not set
 # CONFIG_ATH79_MACH_RE355 is not set
 # CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RME_EG200 is not set
 # CONFIG_ATH79_MACH_RUT9XX is not set
 # CONFIG_ATH79_MACH_RW2458N is not set
 # CONFIG_ATH79_MACH_SC1750 is not set
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index e5fce99b19..e495f6b4c2 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -168,6 +168,7 @@ CONFIG_ATH79=y
 # CONFIG_ATH79_MACH_RBSXTLITE is not set
 # CONFIG_ATH79_MACH_RE355 is not set
 # CONFIG_ATH79_MACH_RE450 is not set
+# CONFIG_ATH79_MACH_RME_EG200 is not set
 # CONFIG_ATH79_MACH_RUT9XX is not set
 # CONFIG_ATH79_MACH_RW2458N is not set
 # CONFIG_ATH79_MACH_SC1750 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index eda1e4002b..248bffb1f5 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1325,6 +1325,16 @@ config ATH79_MACH_RE450
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_RME_EG200
+	bool "eTactica EG200 board supprt"
+	select SOC_AR933X
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_LEDS_GPIO
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_RUT9XX
 	bool "Teltonika RUT900 series support"
 	select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 27ef57d167..98d4677a5f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -179,6 +179,7 @@ obj-$(CONFIG_ATH79_MACH_RBSPI)			+= mach-rbspi.o
 obj-$(CONFIG_ATH79_MACH_RBSXTLITE)		+= mach-rbsxtlite.o
 obj-$(CONFIG_ATH79_MACH_RE355)			+= mach-re450.o
 obj-$(CONFIG_ATH79_MACH_RE450)			+= mach-re450.o
+obj-$(CONFIG_ATH79_MACH_RME_EG200)		+= mach-rme-eg200.o
 obj-$(CONFIG_ATH79_MACH_RUT9XX)			+= mach-rut9xx.o
 obj-$(CONFIG_ATH79_MACH_RW2458N)		+= mach-rw2458n.o
 obj-$(CONFIG_ATH79_MACH_SC1750)			+= mach-sc1750.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c
new file mode 100644
index 0000000000..332b0780d0
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c
@@ -0,0 +1,99 @@
+/*
+ * eTactica EG-200 board, based on 8devices Carambola2 module
+ *
+ * Copyright (C) 2015 Karl Palsson <karlp@etactica.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define RME_EG200_GPIO_LED_WLAN			0
+#define RME_EG200_GPIO_LED_ETH0			13
+#define RME_EG200_GPIO_LED_ETACTICA		15
+#define RME_EG200_GPIO_LED_MODBUS		16
+
+#define RME_EG200_GPIO_BTN_RESTORE		11
+
+#define RME_EG200_KEYS_POLL_INTERVAL		20	/* msecs */
+#define RME_EG200_KEYS_DEBOUNCE_INTERVAL	(3 * RME_EG200_KEYS_POLL_INTERVAL)
+
+#define RME_EG200_MAC0_OFFSET			0x0000
+#define RME_EG200_CALDATA_OFFSET		0x1000
+#define RME_EG200_WMAC_MAC_OFFSET		0x1002
+
+static struct gpio_led rme_eg200_leds_gpio[] __initdata = {
+	{
+		.name		= "eg200:red:wlan",
+		.gpio		= RME_EG200_GPIO_LED_WLAN,
+		.active_low	= 1,
+	}, {
+		.name		= "eg200:red:eth0",
+		.gpio		= RME_EG200_GPIO_LED_ETH0,
+		.active_low	= 1,
+	}, {
+		.name		= "eg200:red:etactica",
+		.gpio		= RME_EG200_GPIO_LED_ETACTICA,
+		.active_low	= 0,
+	}, {
+		.name		= "eg200:red:modbus",
+		.gpio		= RME_EG200_GPIO_LED_MODBUS,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_keys_button rme_eg200_keys[] __initdata = {
+	{
+		.desc		= "restore button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = RME_EG200_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= RME_EG200_GPIO_BTN_RESTORE,
+		.active_low	= 1,
+	},
+};
+
+static void __init rme_eg200_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(NULL);
+	ath79_register_wmac(art + RME_EG200_CALDATA_OFFSET,
+			    art + RME_EG200_WMAC_MAC_OFFSET);
+
+	ath79_setup_ar933x_phy4_switch(true, true);
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, art + RME_EG200_MAC0_OFFSET, 0);
+
+	ath79_register_mdio(0, 0x0);
+
+	/* WAN port */
+	ath79_register_eth(0);
+
+	ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+				AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+				AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+				AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+				AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(rme_eg200_leds_gpio),
+				 rme_eg200_leds_gpio);
+	ath79_register_gpio_keys_polled(-1, RME_EG200_KEYS_POLL_INTERVAL,
+					ARRAY_SIZE(rme_eg200_keys),
+					rme_eg200_keys);
+	ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RME_EG200, "RME-EG200", "eTactica EG-200",
+		rme_eg200_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 27269e54d6..497d794e01 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -209,6 +209,7 @@ enum ath79_mach_type {
 	ATH79_MACH_RB_SXTLITE5ND,		/* Mikrotik RouterBOARD SXT Lite 5nD */
 	ATH79_MACH_RE355,			/* TP-LINK RE355 */
 	ATH79_MACH_RE450,			/* TP-LINK RE450 */
+	ATH79_MACH_RME_EG200,			/* eTactica EG200 */
 	ATH79_MACH_RUT9XX,			/* Teltonika RUT900 series */
 	ATH79_MACH_RW2458N,			/* Redwave RW2458N */
 	ATH79_MACH_SC1750,			/* Abicom SC1750 */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 892d33dc8c..9caf29aa5f 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -127,6 +127,7 @@ CONFIG_ATH79_MACH_R36A=y
 CONFIG_ATH79_MACH_R602N=y
 CONFIG_ATH79_MACH_RE355=y
 CONFIG_ATH79_MACH_RE450=y
+CONFIG_ATH79_MACH_RME_EG200=y
 CONFIG_ATH79_MACH_RUT9XX=y
 CONFIG_ATH79_MACH_RW2458N=y
 CONFIG_ATH79_MACH_SC1750=y
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 1e35f1a84f..eeefde0a98 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -310,6 +310,19 @@ define Device/ew-dorin-router
 endef
 TARGET_DEVICES += ew-dorin-router
 
+define Device/rme-eg200
+  DEVICE_TITLE := eTactica EG-200
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-oneshot \
+	kmod-usb-serial kmod-usb-serial-ftdi \
+	kmod-usb-storage \
+	kmod-fs-ext4
+  BOARDNAME = RME-EG200
+  IMAGE_SIZE = 16000k
+  CONSOLE = ttyATH0,115200
+  MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += rme-eg200
+
 define Device/weio
   DEVICE_TITLE := WeIO
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2