aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
author张鹏 <sd20@qxwlan.com>2018-07-17 18:08:10 +0800
committerJohn Crispin <john@phrozen.org>2018-07-30 14:02:40 +0200
commit21ad5fb1eafd33f82850c18d1df3b247fce17e0e (patch)
treec868363f900d3fa7f9c10420b7cb79fa8b6b9581 /target/linux/ar71xx
parent4dc0ff8183a45d80db88a4b42a24cb0371786e35 (diff)
downloadupstream-21ad5fb1eafd33f82850c18d1df3b247fce17e0e.tar.gz
upstream-21ad5fb1eafd33f82850c18d1df3b247fce17e0e.tar.bz2
upstream-21ad5fb1eafd33f82850c18d1df3b247fce17e0e.zip
ar71xx:add support for E558 v2
Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9558) - 3x 10/100/1000 Mbps Ethernet (one port with PoE support) - 4x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 3-pos switch - 1x DC jack for main power input (9-48 V) - UART (JP5) and LEDs (J8) headers on PCB Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com> (cherry picked from commit b74f63f81d6121b5eace3f0c0c87399f7e0fde92)
Diffstat (limited to 'target/linux/ar71xx')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.91
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt11
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c170
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/generic/config-default1
-rw-r--r--target/linux/ar71xx/image/generic.mk19
12 files changed, 217 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 3bc98bd99f..635c57e87b 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -372,6 +372,9 @@ e1700ac-v2)
ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
;;
+e558-v2)
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ;;
esr900)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index a5e5827362..9d8c1f2214 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -385,6 +385,11 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:wan"
;;
+ e558-v2)
+ ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan"
+ ;;
ebr-2310-c1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 57a96818ce..c3656f54bc 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -24,6 +24,7 @@ get_status_led() {
antminer-s3|\
antminer-r1|\
e1700ac-v2|\
+ e558-v2|\
e600gac-v2|\
eap120|\
minibox-v1|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index f2bc57cb30..7be9a67da5 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -675,6 +675,9 @@ ar71xx_board_detect() {
*"E2100L")
name="e2100l"
;;
+ *"E558 v2")
+ name="e558-v2"
+ ;;
*"E600G v2")
name="e600g-v2"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 4402c70af4..f22e85e9eb 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -250,6 +250,7 @@ platform_check_image() {
dr531|\
dragino2|\
e1700ac-v2|\
+ e558-v2|\
e600g-v2|\
e600gac-v2|\
ebr-2310-c1|\
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index ca976677f0..0437c84ea8 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -101,6 +101,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_DRAGINO2 is not set
# CONFIG_ATH79_MACH_E1700AC_V2 is not set
# CONFIG_ATH79_MACH_E2100L is not set
+# CONFIG_ATH79_MACH_E558_V2 is not set
# CONFIG_ATH79_MACH_E600G_V2 is not set
# CONFIG_ATH79_MACH_EAP120 is not set
# CONFIG_ATH79_MACH_EAP300V2 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index b713629da3..53bf35f718 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -711,6 +711,17 @@ config ATH79_MACH_E2100L
select ATH79_DEV_WMAC
select ATH79_NVRAM
+config ATH79_MACH_E558_V2
+ bool "Qxwlan E558 v2 support"
+ select SOC_QCA955X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_E600G_V2
bool "Qxwlan E600G/E600GAC v2 support"
select SOC_QCA953X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index fa63cca621..babcfa7dfe 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -112,6 +112,7 @@ obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o
obj-$(CONFIG_ATH79_MACH_DR531) += mach-dr531.o
obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
obj-$(CONFIG_ATH79_MACH_E1700AC_V2) += mach-e1700ac-v2.o
+obj-$(CONFIG_ATH79_MACH_E558_V2) += mach-e558-v2.o
obj-$(CONFIG_ATH79_MACH_E600G_V2) += mach-e600g-v2.o
obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o
obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c
new file mode 100644
index 0000000000..c067d58bbb
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c
@@ -0,0 +1,170 @@
+/*
+ * Qxwlan E558 v2 board support
+ *
+ * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define E558_V2_GPIO_LED_WLAN 13
+#define E558_V2_GPIO_LED_SYSTEM 14
+#define E558_V2_GPIO_LED_QSS 15
+
+#define E558_V2_GPIO_BTN_RESET 16
+
+#define E558_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define E558_V2_KEYS_DEBOUNCE_INTERVAL (3 * E558_V2_KEYS_POLL_INTERVAL)
+
+static struct gpio_led e558_v2_leds_gpio[] __initdata = {
+ {
+ .name = "e558-v2:green:qss",
+ .gpio = E558_V2_GPIO_LED_QSS,
+ .active_low = 1,
+ },
+ {
+ .name = "e558-v2:green:system",
+ .gpio = E558_V2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+ {
+ .name = "e558-v2:green:wlan",
+ .gpio = E558_V2_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button e558_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = E558_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = E558_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
+static struct ar8327_pad_cfg e558_v2_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
+static struct ar8327_pad_cfg e558_v2_ar8327_pad6_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static const struct ar8327_led_info e558_v2_leds_qca8334[] = {
+ AR8327_LED_INFO(PHY2_0, HW, "e558-v2:green:wan"),
+ AR8327_LED_INFO(PHY3_0, HW, "e558-v2:green:lan1"),
+ AR8327_LED_INFO(PHY4_0, HW, "e558-v2:green:lan2"),
+};
+
+static struct ar8327_led_cfg e558_v2_ar8327_led_cfg = {
+ .led_ctrl0 = 0xc737c737,
+ .led_ctrl1 = 0x00000000,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x0030c300,
+ .open_drain = false,
+};
+
+static struct ar8327_platform_data e558_v2_ar8327_data = {
+ .pad0_cfg = &e558_v2_ar8327_pad0_cfg,
+ .pad6_cfg = &e558_v2_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &e558_v2_ar8327_led_cfg,
+ .leds = e558_v2_leds_qca8334,
+ .num_leds = ARRAY_SIZE(e558_v2_leds_qca8334),
+};
+
+static struct mdio_board_info e558_v2_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &e558_v2_ar8327_data,
+ },
+};
+
+static void __init e558_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(e558_v2_leds_gpio),
+ e558_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, E558_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(e558_v2_gpio_keys),
+ e558_v2_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(e558_v2_mdio0_info,
+ ARRAY_SIZE(e558_v2_mdio0_info));
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ ath79_register_pci();
+ ath79_register_usb();
+ ath79_register_wmac(art, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_E558_V2, "E558-V2", "Qxwlan E558 v2",
+ e558_v2_setup);
+
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 008e9d8d85..87e7c4c01c 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -105,6 +105,7 @@ enum ath79_mach_type {
ATH79_MACH_DR531, /* Wallys DR531 */
ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
ATH79_MACH_E1700AC_V2, /* Qxwlan E1700AC v2 */
+ ATH79_MACH_E558_V2, /* Qxwlan E558 v2 */
ATH79_MACH_E600G_V2, /* Qxwlan E600G v2 */
ATH79_MACH_E600GAC_V2, /* Qxwlan E600GAC v2 */
ATH79_MACH_EAP120, /* TP-LINK EAP120 */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index a857844f33..753564015f 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -74,6 +74,7 @@ CONFIG_ATH79_MACH_DR531=y
CONFIG_ATH79_MACH_DRAGINO2=y
CONFIG_ATH79_MACH_E1700AC_V2=y
CONFIG_ATH79_MACH_E2100L=y
+CONFIG_ATH79_MACH_E558_V2=y
CONFIG_ATH79_MACH_E600G_V2=y
CONFIG_ATH79_MACH_EAP120=y
CONFIG_ATH79_MACH_EAP300V2=y
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index c74ca130b6..54f69b610b 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -334,6 +334,25 @@ define Device/e1700ac-v2-8M
endef
TARGET_DEVICES += e1700ac-v2-8M
+define Device/e558-v2-16M
+ DEVICE_TITLE := Qxwlan E558 v2 (16MB flash)
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig
+ BOARDNAME := E558-V2
+ SUPPORTED_DEVICES := e558-v2
+ IMAGE_SIZE := 15936k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware)
+ IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += e558-v2-16M
+
+define Device/e558-v2-8M
+ $(Device/e558-v2-16M)
+ DEVICE_TITLE := Qxwlan E558 v2 (8MB flash)
+ IMAGE_SIZE := 7744k
+endef
+TARGET_DEVICES += e558-v2-8M
+
define Device/e600g-v2-16M
DEVICE_TITLE := Qxwlan E600G v2 (16MB flash)
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig