aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2016-10-06 02:19:17 +0200
committerJohn Crispin <john@phrozen.org>2016-11-21 10:05:40 +0100
commit01dda0659eb7d029672af3bd3b590d98e2ee0a5d (patch)
tree9b8fe4c36ee3a15a34bc97606489d3a98be1c14e /target/linux/ar71xx
parent16afa08d19b4f7bf256a89749e76ff8421ece013 (diff)
downloadupstream-01dda0659eb7d029672af3bd3b590d98e2ee0a5d.tar.gz
upstream-01dda0659eb7d029672af3bd3b590d98e2ee0a5d.tar.bz2
upstream-01dda0659eb7d029672af3bd3b590d98e2ee0a5d.zip
ar71xx: add support for YunCore AP90Q
YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2. Short specification: - 650/600/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz with external PA, up to 29 dBm - 2x internal 5 dBi omni antennas - 4x LED, 1x button - UART (JP1) header on PCB Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Flash instruction under vendor fimrware, using telnet/SSH: 1. Connect PC with 192.168.1.x address to WAN port 2. Power up device, enter failsafe mode with button (no LED indicator!) 3. Change root password and reboot (mount_root, passwd ..., reboot -f) 4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP 5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 6. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9f050000" - mtd erase firmware - mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds15
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh7
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c123
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/generic.mk9
10 files changed, 163 insertions, 7 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 29ee5d7b12..c348b4fbda 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -57,6 +57,17 @@ ap147-010)
ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
+ap90q|\
+dr531)
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
+
+ case "$board" in
+ ap90q)
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ;;
+ esac
+ ;;
bhr-4grv2)
ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
@@ -152,10 +163,6 @@ cr5000)
ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "pcs:white:wps" "1-1"
;;
-dr531)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
- ;;
dragino2)
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index bb42843245..0ef5a52a05 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -47,6 +47,10 @@ get_status_led() {
tl-wpa8630)
status_led="$board:green:power"
;;
+ ap90q|\
+ gl-inet)
+ status_led="$board:green:lan"
+ ;;
ap96)
status_led="$board:green:led2"
;;
@@ -168,9 +172,6 @@ get_status_led() {
f9k1115v2)
status_led="belkin:blue:status"
;;
- gl-inet)
- status_led="$board:green:lan"
- ;;
epg5000|\
esr1750)
status_led="$board:amber:power"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 8f710e6d5e..16ee2eb578 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -470,6 +470,9 @@ ar71xx_board_detect() {
*AP83)
name="ap83"
;;
+ *AP90Q)
+ name="ap90q"
+ ;;
*"Archer C5")
name="archer-c5"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 87c9d8fc89..697b786937 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -178,6 +178,7 @@ platform_check_image() {
ap132|\
ap81|\
ap83|\
+ ap90q|\
bullet-m|\
c-55|\
carambola2|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 550b8bbce5..471a44d056 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -49,6 +49,7 @@ CONFIG_ATH79_MACH_AP147=y
CONFIG_ATH79_MACH_AP152=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y
+CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 3a3ed14b41..e9431f139e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -174,6 +174,15 @@ config ATH79_MACH_AP83
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_AP90Q
+ bool "YunCore AP90Q support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_AP96
bool "Atheros AP96 board support"
select SOC_AR71XX
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 1924179cf3..c0caccdb23 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
+obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
new file mode 100644
index 0000000000..35e578122e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
@@ -0,0 +1,123 @@
+/*
+ * YunCore AP90Q board support
+ *
+ * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP90Q_GPIO_LED_WAN 4
+#define AP90Q_GPIO_LED_WLAN 12
+#define AP90Q_GPIO_LED_LAN 16
+
+#define AP90Q_GPIO_BTN_RESET 17
+
+#define AP90Q_KEYS_POLL_INTERVAL 20
+#define AP90Q_KEYS_DEBOUNCE_INTERVAL (3 * AP90Q_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ap90q_leds_gpio[] __initdata = {
+ {
+ .name = "ap90q:green:lan",
+ .gpio = AP90Q_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "ap90q:green:wan",
+ .gpio = AP90Q_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "ap90q:green:wlan",
+ .gpio = AP90Q_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button ap90q_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP90Q_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP90Q_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init ap90q_gpio_setup(void)
+{
+ /* For LED on GPIO4 */
+ ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true);
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true);
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true);
+
+ /* Mute LEDs on boot */
+ gpio_set_value(AP90Q_GPIO_LED_LAN, 1);
+ gpio_set_value(AP90Q_GPIO_LED_WAN, 1);
+
+ ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0);
+ ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0);
+ ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio),
+ ap90q_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap90q_gpio_keys),
+ ap90q_gpio_keys);
+}
+
+static void __init ap90q_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ap90q_gpio_setup();
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+
+ /* LAN */
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 5e504b1242..e69cf3bece 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -38,6 +38,7 @@ enum ath79_mach_type {
ATH79_MACH_AP152, /* Atheros AP152 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_AP83, /* Atheros AP83 */
+ ATH79_MACH_AP90Q, /* YunCore AP90Q */
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 7381eecb9f..0c32cddfdd 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -1,3 +1,12 @@
+define Device/ap90q
+ DEVICE_TITLE := YunCore AP90Q
+ BOARDNAME = AP90Q
+ IMAGE_SIZE = 16000k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
+endef
+TARGET_DEVICES += ap90q
+
define Device/bsb
DEVICE_TITLE := Smart Electronics Black Swift board
DEVICE_PACKAGES := kmod-usb-core kmod-usb2