ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41627 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 58 insertions, 138 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c
index dc5034114f..01719eb5b5 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c
@@ -182,23 +182,6 @@ static struct mdio_board_info archer_c7_mdio0_info[] = {
 	},
 };
 
-static void __init archer_c7_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
-	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-
-	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-	t |= QCA955X_ETH_CFG_RGMII_EN;
-
-	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init common_setup(bool pcie_slot)
 {
 	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
@@ -227,7 +210,7 @@ static void __init common_setup(bool pcie_slot)
 				    ARRAY_SIZE(archer_c7_mdio0_info));
 	ath79_register_mdio(0, 0x0);
 
-	archer_c7_gmac_setup();
+	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
 
 	/* GMAC0 is connected to the RMGII interface */
 	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
index 5b8c3d0109..e102f2c8af 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
@@ -187,23 +187,6 @@ static void nbg6716_get_mac(const char *name, char *mac)
 		pr_err("no MAC address found for %s\n", name);
 }
 
-static void __init nbg6716_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
-	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-
-	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-	t |= QCA955X_ETH_CFG_RGMII_EN;
-
-	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init nbg6716_common_setup(void)
 {
 	u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
@@ -228,7 +211,7 @@ static void __init nbg6716_common_setup(void)
 
 	ath79_register_wmac(art + NBG6716_WMAC_CALDATA_OFFSET, tmpmac);
 
-	nbg6716_gmac_setup();
+	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
 
 	ath79_register_mdio(0, 0x0);
 
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
index b70c586025..4f873e2f74 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
@@ -164,23 +164,6 @@ static struct mdio_board_info wr1043nd_v2_mdio0_info[] = {
 	},
 };
 
-static void __init wr1043nd_v2_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
-	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-
-	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-	t |= QCA955X_ETH_CFG_RGMII_EN;
-
-	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init tl_wr1043nd_v2_setup(void)
 {
 	u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
@@ -202,7 +185,7 @@ static void __init tl_wr1043nd_v2_setup(void)
 				    ARRAY_SIZE(wr1043nd_v2_mdio0_info));
 	ath79_register_mdio(0, 0x0);
 
-	wr1043nd_v2_gmac_setup();
+	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
 
 	/* GMAC0 is connected to the RMGII interface */
 	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
index 8eecc0e6b4..88022e7533 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
@@ -136,23 +136,6 @@ static struct mdio_board_info wlr8100_mdio0_info[] = {
 	},
 };
 
-static void __init wlr8100_gmac_setup(void)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
-	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-
-	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-	t |= QCA955X_ETH_CFG_RGMII_EN;
-
-	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
 static void __init wlr8100_common_setup(void)
 {
 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -169,7 +152,7 @@ static void __init wlr8100_common_setup(void)
 
 	ath79_register_wmac(art + WLR8100_WMAC_CALDATA_OFFSET, NULL);
 
-	wlr8100_gmac_setup();
+	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
 
 	ath79_register_mdio(0, 0x0);
 
diff --git a/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch
index 4b530a7b5a..43097124cd 100644
--- a/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch
+++ b/target/linux/ar71xx/patches-3.10/609-MIPS-ath79-ap136-fixes.patch
@@ -86,7 +86,7 @@
  		.gpio		= AP136_GPIO_LED_USB,
  		.active_low	= 1,
  	}
-@@ -98,65 +106,169 @@ static struct gpio_keys_button ap136_gpi
+@@ -98,65 +106,152 @@ static struct gpio_keys_button ap136_gpi
  	},
  };
  
@@ -134,66 +134,30 @@
 -	.bus_num	= 0,
 -	.num_chipselect	= 1,
 -};
-+static void __init ap136_gmac_setup(void)
-+{
-+	void __iomem *base;
-+	u32 t;
- 
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
- 
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
--{
--	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
--		dev->dev.platform_data = &ap136_ath9k_data;
-+	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
- 
--	return 0;
--}
-+	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-+	t |= QCA955X_ETH_CFG_RGMII_EN;
- 
--static void __init ap136_pci_init(u8 *eeprom)
--{
--	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
--	       sizeof(ap136_ath9k_data.eeprom_data));
-+	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
- 
--	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
--	ath79_register_pci();
-+	iounmap(base);
- }
--#else
--static inline void ap136_pci_init(void) {}
--#endif /* CONFIG_PCI */
- 
--static void __init ap136_setup(void)
 +static void __init ap136_common_setup(void)
- {
- 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- 
++{
++	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
 +	ath79_register_m25p80(NULL);
 +
- 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
- 				 ap136_leds_gpio);
- 	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
- 					ARRAY_SIZE(ap136_gpio_keys),
- 					ap136_gpio_keys);
--	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
--			   ARRAY_SIZE(ap136_spi_info));
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
++				 ap136_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(ap136_gpio_keys),
++					ap136_gpio_keys);
 +
- 	ath79_register_usb();
--	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
--	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
++	ath79_register_usb();
 +	ath79_register_nfc();
 +
 +	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
 +
-+	ap136_gmac_setup();
-+
++	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+ 
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ap136_ath9k_data;
 +	ath79_register_mdio(0, 0x0);
-+
+ 
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
 +	ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
 +
 +	mdiobus_register_board_info(ap136_mdio0_info,
@@ -215,9 +179,12 @@
 +}
 +
 +static void __init ap136_010_setup(void)
-+{
+ {
+-	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+-		dev->dev.platform_data = &ap136_ath9k_data;
 +	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
+ 
+-	return 0;
 +	/* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
 +	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
 +	ap136_ar8327_pad0_cfg.txclk_delay_en = true;
@@ -237,13 +204,15 @@
 +	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
  }
  
- MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
- 	     "Atheros AP136-010 reference board",
--	     ap136_setup);
+-static void __init ap136_pci_init(u8 *eeprom)
++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
++	     "Atheros AP136-010 reference board",
 +	     ap136_010_setup);
 +
 +static void __init ap136_020_common_setup(void)
-+{
+ {
+-	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+-	       sizeof(ap136_ath9k_data.eeprom_data));
 +	/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
 +	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
 +	ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
@@ -254,21 +223,40 @@
 +	ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
 +	ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
 +	ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-+
+ 
+-	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+-	ath79_register_pci();
 +	ath79_eth0_pll_data.pll_1000 = 0x56000000;
 +	ath79_eth1_pll_data.pll_1000 = 0x03000101;
 +
 +	ap136_common_setup();
-+}
-+
+ }
+-#else
+-static inline void ap136_pci_init(void) {}
+-#endif /* CONFIG_PCI */
+ 
+-static void __init ap136_setup(void)
 +static void __init ap136_020_setup(void)
-+{
-+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
+ {
+ 	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ 
+-	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+-				 ap136_leds_gpio);
+-	ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+-					ARRAY_SIZE(ap136_gpio_keys),
+-					ap136_gpio_keys);
+-	ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+-			   ARRAY_SIZE(ap136_spi_info));
+-	ath79_register_usb();
+-	ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+-	ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
 +	ap136_020_common_setup();
 +	ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
-+}
-+
+ }
+ 
+-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+-	     "Atheros AP136-010 reference board",
+-	     ap136_setup);
 +MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
 +	     "Atheros AP136-020 reference board",
 +	     ap136_020_setup);