aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
authorArvid E. Picciani <aep@exys.org>2018-04-16 13:18:37 +0200
committerJohn Crispin <john@phrozen.org>2018-06-20 15:36:19 +0200
commitbf39d5594b3c8f9409e6d9408a1f370c9f18d0dd (patch)
tree36f86e487bf5157322489393ecfdcf0ce791e60d /target/linux/ar71xx
parentc6e02b49f65cb4eff624a0831d3db265b3fadd2a (diff)
downloadupstream-bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd.tar.gz
upstream-bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd.tar.bz2
upstream-bf39d5594b3c8f9409e6d9408a1f370c9f18d0dd.zip
ar71xx: add support for TP-LINK Archer C7 v5
TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9563+QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 10x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin and rename it to ArcherC7v5_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Arvid E. Picciani <aep@exys.org>
Diffstat (limited to 'target/linux/ar71xx')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c207
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/generic-tp-link.mk11
9 files changed, 228 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index c8e10dae9c..d8039fdf6c 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -488,6 +488,7 @@ ar71xx_setup_interfaces()
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
archer-c7-v4|\
+ archer-c7-v5|\
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 29fd244ab5..137baa935e 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -66,6 +66,7 @@ get_status_led() {
archer-c60-v1|\
archer-c60-v2|\
archer-c7-v4|\
+ archer-c7-v5|\
fritz300e|\
fritz4020|\
fritz450e|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c3ae7b64ec..0ed624efc8 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -65,7 +65,8 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
;;
- archer-c7-v4)
+ archer-c7-v4|\
+ archer-c7-v5)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 94add79ea9..b8f9a705ee 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -476,6 +476,9 @@ ar71xx_board_detect() {
*"Archer C7 v4")
name="archer-c7-v4"
;;
+ *"Archer C7 v5")
+ name="archer-c7-v5"
+ ;;
*"Archer C58 v1")
name="archer-c58-v1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 9bc3f8564b..a7968b5bb0 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -212,6 +212,7 @@ platform_check_image() {
archer-c60-v1|\
archer-c60-v2|\
archer-c7-v4|\
+ archer-c7-v5|\
bullet-m|\
c-55|\
carambola2|\
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 6b6874a48e..996fd4c68a 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V2) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v5.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c
new file mode 100644
index 0000000000..a80e0bd941
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c
@@ -0,0 +1,207 @@
+/*
+ * Atheros ARCHER_C7 reference board support
+ *
+ * Copyright (c) 2018 Arvid E. Picciani <aep@exys.org>
+ * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/proc_fs.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+
+
+#define ARCHER_C7_GPIO_BTN_RESET 5
+#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2
+
+#define ARCHER_C7_GPIO_LED_WLAN5 9
+#define ARCHER_C7_GPIO_LED_POWER 6
+#define ARCHER_C7_GPIO_LED_USB 7
+#define ARCHER_C7_GPIO_LED_WPS 1
+#define ARCHER_C7_GPIO_LED_LAN1 8
+#define ARCHER_C7_GPIO_LED_LAN2 17
+#define ARCHER_C7_GPIO_LED_LAN3 16
+#define ARCHER_C7_GPIO_LED_LAN4 15
+#define ARCHER_C7_GPIO_LED_WAN_GREEN 21
+#define ARCHER_C7_GPIO_LED_WAN_AMBER 20
+#define ARCHER_C7_GPIO_LED_WLAN2 14
+#define ARCHER_C7_GPIO_USB_PWR 19
+
+#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
+
+#define ARCHER_C7_MAC0_OFFSET 0
+#define ARCHER_C7_MAC1_OFFSET 6
+#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
+
+#define ARCHER_C7_GPIO_MDC 3
+#define ARCHER_C7_GPIO_MDIO 4
+
+static struct gpio_led archer_c7_v5_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c7-v5:green:power",
+ .gpio = ARCHER_C7_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:wps",
+ .gpio = ARCHER_C7_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:wlan2g",
+ .gpio = ARCHER_C7_GPIO_LED_WLAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:wlan5g",
+ .gpio = ARCHER_C7_GPIO_LED_WLAN5,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:lan1",
+ .gpio = ARCHER_C7_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:lan2",
+ .gpio = ARCHER_C7_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:lan3",
+ .gpio = ARCHER_C7_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:lan4",
+ .gpio = ARCHER_C7_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:wan",
+ .gpio = ARCHER_C7_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:amber:wan",
+ .gpio = ARCHER_C7_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "archer-c7-v5:green:usb",
+ .gpio = ARCHER_C7_GPIO_LED_USB,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button archer_c7_v5_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS and WIFI button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI,
+ .active_low = 1,
+ },
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ARCHER_C7_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+
+static struct ar8327_pad_cfg archer_c7_v5_ar8337_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+static struct ar8327_platform_data archer_c7_v5_ar8337_data = {
+ .pad0_cfg = &archer_c7_v5_ar8337_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info archer_c7_v5_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &archer_c7_v5_ar8337_data,
+ },
+};
+
+
+static void __init archer_c7_v5_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f060008);
+
+ ath79_register_m25p80(NULL);
+
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v5_leds_gpio),
+ archer_c7_v5_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c7_v5_gpio_keys),
+ archer_c7_v5_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC);
+ ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO);
+
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(archer_c7_v5_mdio0_info,
+ ARRAY_SIZE(archer_c7_v5_mdio0_info));
+
+ gpio_request_one(ARCHER_C7_GPIO_USB_PWR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
+ ath79_register_pci();
+
+ /* GMAC0 is connected to an AR8337 switch */
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V5, "ARCHER-C7-V5", "TP-LINK Archer C7 v5",
+ archer_c7_v5_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 992e080640..dce25c6fc8 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -52,6 +52,7 @@ enum ath79_mach_type {
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */
+ ATH79_MACH_ARCHER_C7_V5, /* TP-LINK Archer C7 V5 board */
ATH79_MACH_ARDUINO_YUN, /* Yun */
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */
diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk
index 429540a52c..6f7d608b01 100644
--- a/target/linux/ar71xx/image/generic-tp-link.mk
+++ b/target/linux/ar71xx/image/generic-tp-link.mk
@@ -141,6 +141,17 @@ define Device/archer-c7-v4
endef
TARGET_DEVICES += archer-c7-v4
+define Device/archer-c7-v5
+ $(Device/archer-c7-v4)
+ DEVICE_TITLE := TP-LINK Archer C7 v5
+ BOARDNAME := ARCHER-C7-V5
+ TPLINK_BOARD_ID := ARCHER-C7-V5
+ IMAGE_SIZE := 15104k
+ MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,1536k@0xc0000(kernel),13824k(rootfs),15360k@0xc0000(firmware)
+ SUPPORTED_DEVICES := archer-c7-v5
+endef
+TARGET_DEVICES += archer-c7-v5
+
define Device/cpe510-520-v1
DEVICE_TITLE := TP-LINK CPE510/520 v1
DEVICE_PACKAGES := rssileds