aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx
diff options
context:
space:
mode:
authorJohn Crispin <john@phrozen.org>2017-05-18 15:31:26 +0200
committerJohn Crispin <john@phrozen.org>2017-05-18 15:31:47 +0200
commitbad2f9c4dc39ff8a8bdc7ad4bd86f2c068457a5a (patch)
tree4020fbfbed868597656a331eb2fef2b6a7c4d19d /target/linux/ar71xx
parenteee09bfe01e8cc2db1501f82dde7b9b6bb424faf (diff)
downloadupstream-bad2f9c4dc39ff8a8bdc7ad4bd86f2c068457a5a.tar.gz
upstream-bad2f9c4dc39ff8a8bdc7ad4bd86f2c068457a5a.tar.bz2
upstream-bad2f9c4dc39ff8a8bdc7ad4bd86f2c068457a5a.zip
Revert "ar71xx: Add support for Teltonika RUT900"
This reverts commit 224e5f5efa22b8a0132522367afd3b22f05d53e1. pepe2k pointed out that this was not ready to merge Signed-off-by: John Crispin <john@phrozen.org>
Diffstat (limited to 'target/linux/ar71xx')
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/ar71xx/config-4.42
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt11
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c260
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/files/drivers/mtd/tltpart.c206
-rw-r--r--target/linux/ar71xx/image/tp-link.mk11
-rw-r--r--target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch25
11 files changed, 1 insertions, 525 deletions
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 0d0ebdcd6f..9cad8995db 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -423,9 +423,6 @@ get_status_led() {
tl-wdr6500-v2)
status_led="tp-link:white:system"
;;
- tlt-rut900)
- status_led="tlt:green:status"
- ;;
tube2h)
status_led="alfa:green:signal4"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 8ee17f43c8..a751c64a3a 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -1154,9 +1154,6 @@ ar71xx_board_detect() {
*"TL-WR941ND")
name="tl-wr941nd"
;;
- *"TLT-RUT900")
- name="tlt-rut900"
- ;;
*"Tube2H")
name="tube2h"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 1bc993450d..e246f35add 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -443,8 +443,7 @@ platform_check_image() {
tl-wr941nd-v5|\
tl-wr941nd-v6|\
tl-wr940n-v4|\
- tl-wr941nd|\
- tlt-rut900)
+ tl-wr941nd)
local magic_ver="0100"
case "$board" in
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index b508248041..0a375862ba 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -207,7 +207,6 @@ CONFIG_ATH79_MACH_TL_WR841N_V9=y
CONFIG_ATH79_MACH_TL_WR941ND=y
CONFIG_ATH79_MACH_TL_WR941ND_V6=y
CONFIG_ATH79_MACH_TL_WR940N_V4=y
-CONFIG_ATH79_MACH_TLT_RUT900=y
CONFIG_ATH79_MACH_TUBE2H=y
CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
@@ -390,7 +389,6 @@ CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_SPLIT_WRGG_FW=y
CONFIG_MTD_SPLIT_MINOR_FW=y
CONFIG_MTD_TPLINK_PARTS=y
-CONFIG_MTD_TLT_PARTS=y
CONFIG_MYLOADER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 35dc916fca..9030954c27 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -2021,14 +2021,3 @@ config ATH79_MACH_TL_WPA8630
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
-
-config ATH79_MACH_TLT_RUT900
- bool "Teltonika RUT900 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index e92aa6f4d8..2868adcaef 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -212,7 +212,6 @@ obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o
obj-$(CONFIG_ATH79_MACH_TL_WR940N_V4) += mach-tl-wr940n-v4.o
-obj-$(CONFIG_ATH79_MACH_TLT_RUT900) += mach-tlt-rut900.o
obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o
obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC) += mach-ubnt-unifiac.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c
deleted file mode 100644
index 0f53692a69..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tlt-rut900.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * TELTONIKA TLT-RUT900 board support
- *
- * Copyright (C) 2014 Teltonika
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-
-/* I2C interface */
-#define rut900_GPIO_SDA 17
-#define rut900_GPIO_SCK 16
-
-#define RUT900_GPIO_LED_BAR0 48
-#define RUT900_GPIO_LED_BAR1 49
-#define RUT900_GPIO_LED_BAR2 50
-#define RUT900_GPIO_LED_BAR3 51
-#define RUT900_GPIO_LED_BAR4 52
-#define RUT900_GPIO_LED_ST_GRE 54
-#define RUT900_GPIO_LED_ST_RED 53
-//#define RUT900_GPIO_LED_WAN 18
-#define RUT900_GPIO_LED_LAN1 14
-#define RUT900_GPIO_LED_LAN2 13
-#define RUT900_GPIO_LED_LAN3 22
-#define RUT900_GPIO_LED_WAN 1
-
-#define RUT900_GPIO_EXTERNAL_LNA0 2
-//#define RUT900_GPIO_EXTERNAL_LNA1 3
-
-#define RUT900_GPIO_BTN_RESET 15
-#define RUT900_GPIO_BTN_EXPANDER 4
-#define RUT900_GPIO_BTN_TEST 58
-#define RUT900_GPIO_MMC_CS 3
-
-//#define RUT900_GPIO_EXPANDER_POWER 11
-
-#define RUT900_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RUT900_KEYS_DEBOUNCE_INTERVAL (3 * RUT900_KEYS_POLL_INTERVAL)
-#define RUT900_KEYS_DEBOUNCE_INTERVAL_DIN 20
-
-#define RUT900_MAC0_OFFSET 0
-#define RUT900_MAC1_OFFSET 6
-#define RUT900_WMAC_CALDATA_OFFSET 0x1000
-#define RUT900_PCIE_CALDATA_OFFSET 0x5000
-
-static struct i2c_gpio_platform_data rut900_i2c_device_platdata = {
- .sda_pin = rut900_GPIO_SDA,
- .scl_pin = rut900_GPIO_SCK,
- .udelay = 10,
-};
-
-static struct platform_device rut900_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &rut900_i2c_device_platdata,
- },
-};
-
-static struct i2c_board_info rut900_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("pca9539", 0x74),
- },
- {
- I2C_BOARD_INFO("mcp3221", 0x4D),
- },
-};
-
-static void rut900_i2c_init(void)
-{
- /* The gpio interface */
- platform_device_register(&rut900_i2c_device);
- /* I2C devices */
- i2c_register_board_info(0, rut900_i2c_devs, ARRAY_SIZE(rut900_i2c_devs));
-}
-
-//Flash partitions are calcutated in drivers/mtd/tltpart.c
-static const char *rut900_part_probes[] = {
- "tlt",
- NULL,
-};
-
-static struct flash_platform_data rut900_flash_data = {
- .part_probes = rut900_part_probes,
-};
-
-static struct gpio_led rut900_leds_gpio[] __initdata = {
- {
- .name = "tlt:green:signal_bar0",
- .gpio = RUT900_GPIO_LED_BAR0,
- .active_low = 0,
- },
- {
- .name = "tlt:green:signal_bar1",
- .gpio = RUT900_GPIO_LED_BAR1,
- .active_low = 0,
- },
- {
- .name = "tlt:green:signal_bar2",
- .gpio = RUT900_GPIO_LED_BAR2,
- .active_low = 0,
- },
- {
- .name = "tlt:green:signal_bar3",
- .gpio = RUT900_GPIO_LED_BAR3,
- .active_low = 0,
- },
- {
- .name = "tlt:green:signal_bar4",
- .gpio = RUT900_GPIO_LED_BAR4,
- .active_low = 0,
- },
- {
- .name = "tlt:green:status",
- .gpio = RUT900_GPIO_LED_ST_GRE,
- .active_low = 0,
- },
- {
- .name = "tlt:red:status",
- .gpio = RUT900_GPIO_LED_ST_RED,
- .active_low = 0,
- },
-
-};
-
-static struct gpio_keys_button rut900_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RUT900_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RUT900_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "Expander interrupt",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = RUT900_KEYS_DEBOUNCE_INTERVAL_DIN,
- .gpio = RUT900_GPIO_BTN_EXPANDER,
- },
-};
-
-static struct spi_board_info ath79_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &rut900_flash_data,
- },
- {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "mmc_spi",
- }
-};
-
-static struct ath79_spi_platform_data ath79_spi_data = {
- .bus_num = 0,
- .num_chipselect = 2,
-};
-
-static void __init rut900_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f020000);
- u8 *art = (u8 *) KSEG1ADDR(0x1f030000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rut900_leds_gpio),
- rut900_leds_gpio);
- ath79_register_gpio_keys_polled(-1, RUT900_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rut900_gpio_keys),
- rut900_gpio_keys);
-
- ath79_wmac_set_ext_lna_gpio(0, RUT900_GPIO_EXTERNAL_LNA0);
-
- ath79_init_mac(tmpmac, mac, 2);
- ath79_register_wmac(art + RUT900_WMAC_CALDATA_OFFSET, tmpmac);
-
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
- ath79_register_eth(1);
-
- /* WAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
- /* GMAC0 is connected to the PHY4 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- ath79_register_eth(0);
-
- ath79_register_usb();
-
- ath79_gpio_output_select(RUT900_GPIO_LED_LAN1,
- AR934X_GPIO_OUT_LED_LINK3);
- ath79_gpio_output_select(RUT900_GPIO_LED_LAN2,
- AR934X_GPIO_OUT_LED_LINK2);
- ath79_gpio_output_select(RUT900_GPIO_LED_LAN3,
- AR934X_GPIO_OUT_LED_LINK1);
- ath79_gpio_output_select(RUT900_GPIO_LED_WAN,
- AR934X_GPIO_OUT_LED_LINK4);
-
- //SPI CS1
- ath79_gpio_output_select(RUT900_GPIO_MMC_CS,
- 7);
-
- //HS UART
- ath79_gpio_output_select(18, 79);
-
- /* Init I2C interface */
- rut900_i2c_init();
-}
-
-MIPS_MACHINE(ATH79_MACH_TLT_RUT900, "TLT-RUT900",
- "TELTONIKA TLT-RUT900",
- rut900_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 8aaa0a5c24..18033acd12 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -259,7 +259,6 @@ enum ath79_mach_type {
ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */
ATH79_MACH_TL_WR940N_V4, /* TP-LINK TL-WR940N v4 */
- ATH79_MACH_TLT_RUT900, /* Teltonika RUT900 */
ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */
diff --git a/target/linux/ar71xx/files/drivers/mtd/tltpart.c b/target/linux/ar71xx/files/drivers/mtd/tltpart.c
deleted file mode 100644
index 92f558d778..0000000000
--- a/target/linux/ar71xx/files/drivers/mtd/tltpart.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/magic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#define TLT_NUM_PARTS 7
-#define TLT_HEADER_V1 0x01000000
-#define MD5SUM_LEN 16
-
-#define TLT_UBOOT_LEN 0x20000
-#define TLT_CONFIG_LEN 0x10000
-#define TLT_ART_LEN 0x10000
-#define EVENTLOG_LEN 0x90000
-
-struct tlt_fw_header {
- uint32_t version; /* header version */
- char vendor_name[24];
- char fw_version[36];
- uint32_t hw_id; /* hardware id */
- uint32_t hw_rev; /* hardware revision */
- uint32_t unk1;
- uint8_t md5sum1[MD5SUM_LEN];
- uint32_t unk2;
- uint8_t md5sum2[MD5SUM_LEN];
- uint32_t unk3;
- uint32_t kernel_la; /* kernel load address */
- uint32_t kernel_ep; /* kernel entry point */
- uint32_t fw_length; /* total length of the firmware */
- uint32_t kernel_ofs; /* kernel data offset */
- uint32_t kernel_len; /* kernel data length */
- uint32_t rootfs_ofs; /* rootfs data offset */
- uint32_t rootfs_len; /* rootfs data length */
- uint32_t boot_ofs; /* bootloader data offset */
- uint32_t boot_len; /* bootloader data length */
- uint8_t pad[360];
-} __attribute__ ((packed));
-
-static struct tlt_fw_header *
-tlt_read_header(struct mtd_info *mtd, size_t offset)
-{
- struct tlt_fw_header *header;
- size_t header_len;
- size_t retlen;
- int ret;
- u32 t;
-
- header = vmalloc(sizeof(*header));
- if (!header)
- goto err;
-
- header_len = sizeof(struct tlt_fw_header);
- ret = mtd_read(mtd, offset, header_len, &retlen,
- (unsigned char *) header);
- if (ret)
- goto err_free_header;
-
- if (retlen != header_len)
- goto err_free_header;
-
- /* sanity checks */
- t = be32_to_cpu(header->version);
- if (t != TLT_HEADER_V1)
- goto err_free_header;
-
- t = be32_to_cpu(header->kernel_ofs);
- if (t != header_len)
- goto err_free_header;
-
- return header;
-
-err_free_header:
- vfree(header);
-err:
- return NULL;
-}
-
-static int tlt_check_rootfs_magic(struct mtd_info *mtd, size_t offset)
-{
- u32 magic;
- size_t retlen;
- int ret;
-
- ret = mtd_read(mtd, offset, sizeof(magic), &retlen,
- (unsigned char *) &magic);
- if (ret)
- return ret;
-
- if (retlen != sizeof(magic))
- return -EIO;
-
- if (le32_to_cpu(magic) != SQUASHFS_MAGIC &&
- magic != 0x19852003)
- return -EINVAL;
-
- return 0;
-}
-
-static int tlt_parse_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-{
- struct mtd_partition *parts;
- struct tlt_fw_header *header;
- int nr_parts;
- size_t kernel_offset;
- size_t rootfs_offset;
- size_t squashfs_offset;
- int ret;
-
- nr_parts = TLT_NUM_PARTS;
- parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL);
- if (!parts) {
- ret = -ENOMEM;
- goto err;
- }
-
- kernel_offset = TLT_UBOOT_LEN + TLT_CONFIG_LEN + TLT_ART_LEN;
-
- header = tlt_read_header(master, kernel_offset);
- if (!header) {
- pr_notice("%s: no TP-Link header found\n", master->name);
- ret = -ENODEV;
- goto err_free_parts;
- }
-
- squashfs_offset = kernel_offset + sizeof(struct tlt_fw_header) +
- be32_to_cpu(header->kernel_len);
-
- ret = tlt_check_rootfs_magic(master, squashfs_offset);
- if (ret == 0)
- rootfs_offset = squashfs_offset;
- else
- rootfs_offset = kernel_offset + be32_to_cpu(header->rootfs_ofs);
-
- vfree(header);
-
- parts[0].name = "u-boot";
- parts[0].offset = 0;
- parts[0].size = TLT_UBOOT_LEN;
- parts[0].mask_flags = MTD_WRITEABLE;
-
- parts[1].name = "config";
- parts[1].offset = TLT_UBOOT_LEN;
- parts[1].size = TLT_CONFIG_LEN;
-
- parts[2].name = "art";
- parts[2].offset = TLT_UBOOT_LEN + TLT_CONFIG_LEN;
- parts[2].size = TLT_ART_LEN;
- parts[2].mask_flags = MTD_WRITEABLE;
-
- parts[3].name = "kernel";
- parts[3].offset = kernel_offset;
- parts[3].size = rootfs_offset - kernel_offset;
-
- parts[4].name = "rootfs";
- parts[4].offset = rootfs_offset;
- parts[4].size = master->size - rootfs_offset - EVENTLOG_LEN;
-
- parts[5].name = "firmware";
- parts[5].offset = kernel_offset;
- parts[5].size = master->size - kernel_offset - EVENTLOG_LEN;
-
- parts[6].name = "event-log";
- parts[6].offset = master->size - EVENTLOG_LEN;
- parts[6].size = EVENTLOG_LEN;
-
- *pparts = parts;
- return nr_parts;
-
-err_free_parts:
- kfree(parts);
-err:
- *pparts = NULL;
- return ret;
-}
-
-static struct mtd_part_parser tlt_parser = {
- .owner = THIS_MODULE,
- .parse_fn = tlt_parse_partitions,
- .name = "tlt",
-};
-
-static int __init tlt_parser_init(void)
-{
- register_mtd_parser(&tlt_parser);
-
- return 0;
-}
-
-module_init(tlt_parser_init);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 49e87cfb99..6ddf05239d 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -1084,14 +1084,3 @@ define Device/tl-wa7210n-v2
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tl-wa7210n-v2
-
-define Device/tlt-rut900
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := Teltonika RUT900
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
- BOARDNAME := TLT-RUT900
- DEVICE_PROFILE := TLTRUT900
- TPLINK_HWID := 0x35000001
- CONSOLE := ttyS0,115200
-endef
-TARGET_DEVICES += tlt-rut900
diff --git a/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch b/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch
deleted file mode 100644
index da4e088471..0000000000
--- a/target/linux/ar71xx/patches-4.4/471-ath79-tlt-rut900-flash-layout.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -202,6 +202,12 @@ config MTD_TPLINK_PARTS
- ---help---
- TBD.
-
-+config MTD_TLT_PARTS
-+ tristate "Teltonika RUT900 partitioning support"
-+ depends on ATH79
-+ ---help---
-+ Teltonika RUT900 partitioning support
-+
- comment "User Modules And Translation Layers"
-
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
- obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
-+obj-$(CONFIG_MTD_TLT_PARTS) += tltpart.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o