diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2017-10-03 18:02:59 +0200 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2017-10-11 22:32:39 +0200 |
| commit | 7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c (patch) | |
| tree | e42a4555f9845f78fb9baf7102da8d3d45adfacc /target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch | |
| parent | 2909a4b78e2bce5f6b9c35361866d5e9477a1bdc (diff) | |
| download | upstream-7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c.tar.gz upstream-7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c.tar.bz2 upstream-7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c.zip | |
ar71xx: Add kernel 4.9 support
This add support for kernel 4.9 to the ar71xx target.
It was compile tested with the generic, NAND and mikrotik subtarget.
Multiple members of the community tested it on their boards and did not
report any major problem so far.
Especially the NAND part received some changes to adapt to the new
kernel APIs. The serial driver hack used for the Arduino Yun was not
ported because the kernel changed there a lot.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch')
| -rw-r--r-- | target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch new file mode 100644 index 0000000000..536c28d1ca --- /dev/null +++ b/target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch @@ -0,0 +1,20 @@ +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -67,12 +67,16 @@ config ATH79_MACH_PB44 + Atheros PB44 reference board. + + config ATH79_MACH_UBNT_XM +- bool "Ubiquiti Networks XM (rev 1.0) board" ++ bool "Ubiquiti Networks XM/UniFi boards" + select SOC_AR724X ++ select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI ++ select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC + help + Say 'Y' here if you want your kernel to support the + Ubiquiti Networks XM (rev 1.0) board. |