aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch
diff options
context:
space:
mode:
authorHauke Mehrtens <hauke@hauke-m.de>2017-10-03 18:02:59 +0200
committerHauke Mehrtens <hauke@hauke-m.de>2017-10-11 22:32:39 +0200
commit7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c (patch)
treee42a4555f9845f78fb9baf7102da8d3d45adfacc /target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch
parent2909a4b78e2bce5f6b9c35361866d5e9477a1bdc (diff)
downloadupstream-7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c.tar.gz
upstream-7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c.tar.bz2
upstream-7bbf4117c6fe4b764d9d7c62fb2bcf6dd93bff2c.zip
ar71xx: Add kernel 4.9 support
This add support for kernel 4.9 to the ar71xx target. It was compile tested with the generic, NAND and mikrotik subtarget. Multiple members of the community tested it on their boards and did not report any major problem so far. Especially the NAND part received some changes to adapt to the new kernel APIs. The serial driver hack used for the Arduino Yun was not ported because the kernel changed there a lot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch')
-rw-r--r--target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch14
1 files changed, 14 insertions, 0 deletions
diff --git a/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch
new file mode 100644
index 0000000000..d667215a15
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch
@@ -0,0 +1,14 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -69,9 +69,10 @@ config ATH79_MACH_PB44
+ config ATH79_MACH_UBNT_XM
+ bool "Ubiquiti Networks XM (rev 1.0) board"
+ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+- select ATH79_DEV_SPI
++ select ATH79_DEV_M25P80
+ help
+ Say 'Y' here if you want your kernel to support the
+ Ubiquiti Networks XM (rev 1.0) board.