ar71xx: add support for linux 4.4

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48563

1 files changed, 641 insertions, 0 deletions

diff --git a/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
new file mode 100644
index 0000000000..b463d14156
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
@@ -0,0 +1,641 @@
+--- a/arch/mips/ath79/mach-ubnt-xm.c
++++ b/arch/mips/ath79/mach-ubnt-xm.c
+@@ -12,16 +12,26 @@
+ 
+ #include <linux/init.h>
+ #include <linux/pci.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/etherdevice.h>
++#include <linux/ar8216_platform.h>
+ 
++#include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/irq.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
+ 
++#include <linux/platform_data/phy-at803x.h>
++
++#include "common.h"
+ #include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-m25p80.h"
++#include "dev-usb.h"
++#include "dev-wmac.h"
+ #include "machtypes.h"
+-#include "pci.h"
+ 
+ #define UBNT_XM_GPIO_LED_L1		0
+ #define UBNT_XM_GPIO_LED_L2		1
+@@ -37,19 +47,19 @@
+ 
+ static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
+ 	{
+-		.name		= "ubnt-xm:red:link1",
++		.name		= "ubnt:red:link1",
+ 		.gpio		= UBNT_XM_GPIO_LED_L1,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:orange:link2",
++		.name		= "ubnt:orange:link2",
+ 		.gpio		= UBNT_XM_GPIO_LED_L2,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:green:link3",
++		.name		= "ubnt:green:link3",
+ 		.gpio		= UBNT_XM_GPIO_LED_L3,
+ 		.active_low	= 0,
+ 	}, {
+-		.name		= "ubnt-xm:green:link4",
++		.name		= "ubnt:green:link4",
+ 		.gpio		= UBNT_XM_GPIO_LED_L4,
+ 		.active_low	= 0,
+ 	},
+@@ -66,9 +76,13 @@ static struct gpio_keys_button ubnt_xm_g
+ 	}
+ };
+ 
++#define UBNT_M_WAN_PHYMASK	BIT(4)
++
+ static void __init ubnt_xm_init(void)
+ {
+ 	u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+ 
+ 	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
+ 				 ubnt_xm_leds_gpio);
+@@ -79,9 +93,552 @@ static void __init ubnt_xm_init(void)
+ 
+ 	ath79_register_m25p80(NULL);
+ 	ap91_pci_init(eeprom, NULL);
++
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
+ }
+ 
+ MIPS_MACHINE(ATH79_MACH_UBNT_XM,
+ 	     "UBNT-XM",
+ 	     "Ubiquiti Networks XM (rev 1.0) board",
+ 	     ubnt_xm_init);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
++	     ubnt_xm_init);
++
++static void __init ubnt_rocket_m_setup(void)
++{
++	ubnt_xm_init();
++	ath79_register_usb();
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
++	     ubnt_rocket_m_setup);
++
++static void __init ubnt_nano_m_setup(void)
++{
++	ubnt_xm_init();
++	ath79_register_eth(1);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
++	     ubnt_nano_m_setup);
++
++static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:green:globe",
++		.gpio		= 0,
++		.active_low	= 1,
++	}, {
++	        .name		= "ubnt:green:power",
++		.gpio		= 11,
++		.active_low	= 1,
++		.default_state  = LEDS_GPIO_DEFSTATE_ON,
++	}
++};
++
++static void __init ubnt_airrouter_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++	ath79_register_usb();
++
++	ap91_pci_init(ee, NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
++				 ubnt_airrouter_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
++	     ubnt_airrouter_setup);
++
++static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:orange:dome",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:dome",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:orange:front",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:front",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:white:front",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:blue:front",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++
++static void __init ubnt_unifi_setup(void)
++{
++	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
++	ath79_register_eth(0);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
++				 ubnt_unifi_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
++	     ubnt_unifi_setup);
++
++
++#define UBNT_UNIFIOD_PRI_PHYMASK	BIT(4)
++#define UBNT_UNIFIOD_2ND_PHYMASK	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
++
++static void __init ubnt_unifi_outdoor_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++				 UBNT_UNIFIOD_2ND_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
++				 ubnt_unifi_outdoor_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
++	     "Ubiquiti UniFiAP Outdoor",
++	     ubnt_unifi_outdoor_setup);
++
++
++static void __init ubnt_unifi_outdoor_plus_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++				 UBNT_UNIFIOD_2ND_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
++				 ubnt_unifi_outdoor_plus_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
++	     "Ubiquiti UniFiAP Outdoor+",
++	     ubnt_unifi_outdoor_plus_setup);
++
++
++static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
++	{
++		.name		= "ubnt:white:dome",
++		.gpio		= 12,
++	}, {
++		.name		= "ubnt:blue:dome",
++		.gpio		= 13,
++	}
++};
++
++static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
++	{
++		.desc			= "reset",
++		.type			= EV_KEY,
++		.code			= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio			= 17,
++		.active_low		= 1,
++	}
++};
++
++static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
++	.mode = AR8327_PAD_MAC_RGMII,
++	.txclk_delay_en = true,
++	.rxclk_delay_en = true,
++	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
++};
++
++static struct ar8327_platform_data uap_pro_ar8327_data = {
++	.pad0_cfg = &uap_pro_ar8327_pad0_cfg,
++	.port0_cfg = {
++		.force_link = 1,
++		.speed = AR8327_PORT_SPEED_1000,
++		.duplex = 1,
++		.txpause = 1,
++		.rxpause = 1,
++	},
++};
++
++static struct mdio_board_info uap_pro_mdio0_info[] = {
++	{
++		.bus_id = "ag71xx-mdio.0",
++		.phy_addr = 0,
++		.platform_data = &uap_pro_ar8327_data,
++	},
++};
++
++#define UAP_PRO_MAC0_OFFSET		0x0000
++#define UAP_PRO_MAC1_OFFSET		0x0006
++#define UAP_PRO_WMAC_CALDATA_OFFSET	0x1000
++#define UAP_PRO_PCI_CALDATA_OFFSET	0x5000
++
++static void __init ubnt_uap_pro_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
++				 ubnt_uap_pro_gpio_leds);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(uap_pro_gpio_keys),
++                                        uap_pro_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++	ath79_register_mdio(0, 0x0);
++	mdiobus_register_board_info(uap_pro_mdio0_info,
++				    ARRAY_SIZE(uap_pro_mdio0_info));
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	/* GMAC0 is connected to an AR8327 switch */
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.phy_mask = BIT(0);
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
++	     ubnt_uap_pro_setup);
++
++#define UBNT_XW_GPIO_LED_L1		11
++#define UBNT_XW_GPIO_LED_L2		16
++#define UBNT_XW_GPIO_LED_L3		13
++#define UBNT_XW_GPIO_LED_L4		14
++
++static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:red:link1",
++		.gpio		= UBNT_XW_GPIO_LED_L1,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:orange:link2",
++		.gpio		= UBNT_XW_GPIO_LED_L2,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link3",
++		.gpio		= UBNT_XW_GPIO_LED_L3,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link4",
++		.gpio		= UBNT_XW_GPIO_LED_L4,
++		.active_low	= 1,
++	},
++};
++
++#define UBNT_ROCKET_TI_GPIO_LED_L1	16
++#define UBNT_ROCKET_TI_GPIO_LED_L2	17
++#define UBNT_ROCKET_TI_GPIO_LED_L3	18
++#define UBNT_ROCKET_TI_GPIO_LED_L4	19
++#define UBNT_ROCKET_TI_GPIO_LED_L5	20
++#define UBNT_ROCKET_TI_GPIO_LED_L6	21
++static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:green:link1",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L1,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link2",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L2,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link3",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L3,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link4",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L4,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:link5",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L5,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:green:link6",
++		.gpio		= UBNT_ROCKET_TI_GPIO_LED_L6,
++		.active_low	= 0,
++	},
++};
++
++static void __init ubnt_xw_init(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
++				 ubnt_xw_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++}
++
++static void __init ubnt_nano_m_xw_setup(void)
++{
++	ubnt_xw_init();
++
++	/* GMAC0 is connected to an AR8326 switch */
++	ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
++	ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_register_eth(0);
++}
++
++static void __init ubnt_loco_m_xw_setup(void)
++{
++	ubnt_xw_init();
++
++	ath79_register_mdio(0, ~BIT(1));
++	ath79_eth0_data.phy_mask = BIT(1);
++	ath79_register_eth(0);
++}
++
++static void __init ubnt_rocket_m_xw_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
++				 ubnt_xw_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++	ath79_register_mdio(0, ~BIT(4));
++	ath79_eth0_data.phy_mask = BIT(4);
++	ath79_eth0_pll_data.pll_1000 = 0x06000000;
++	ath79_register_eth(0);
++}
++
++static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = {
++	.disable_smarteee = 1,
++	.enable_rgmii_rx_delay = 1,
++	.enable_rgmii_tx_delay = 1,
++};
++static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = {
++        {
++                .bus_id = "ag71xx-mdio.0",
++                .phy_addr = 4,
++                .platform_data = &ubnt_rocket_m_ti_at803_data,
++        },
++};
++
++static void __init ubnt_rocket_m_ti_setup(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio),
++				 ubnt_rocket_ti_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++
++	ap91_pci_init(eeprom + 0x1000, NULL);
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
++	ath79_setup_ar934x_eth_rx_delay(3, 3);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr,
++		       eeprom + UAP_PRO_MAC1_OFFSET, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++	ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
++
++	mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info,
++			ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info));
++	ath79_register_mdio(0, 0x0);
++
++
++	ath79_eth0_data.phy_mask = BIT(4);
++	/* read out from vendor */
++	ath79_eth0_pll_data.pll_1000 = 0x2000000;
++	ath79_eth0_pll_data.pll_10 = 0x1313;
++	ath79_register_eth(0);
++
++	ath79_register_mdio(1, 0x0);
++	ath79_eth1_data.phy_mask = BIT(3);
++	ath79_register_eth(1);
++}
++
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
++	     ubnt_nano_m_xw_setup);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
++	     ubnt_loco_m_xw_setup);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW",
++	     ubnt_rocket_m_xw_setup);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI",
++	     ubnt_rocket_m_ti_setup);
++
++static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
++	{
++		.name	   = "ubnt:blue:wlan",
++		.gpio	   = 0,
++	}, {
++		.name	   = "ubnt:white:status",
++		.gpio	   = 1,
++	},
++};
++
++static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 12,
++		.active_low	= 1,
++	}
++};
++
++static void __init ubnt_airgateway_setup(void)
++{
++	u32 t;
++	u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
++				 ubnt_airgateway_gpio_leds);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(airgateway_gpio_keys),
++					airgateway_gpio_keys);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
++	     ubnt_airgateway_setup);
++
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
+ 	  Atheros PB44 reference board.
+ 
+ config ATH79_MACH_UBNT_XM
+-	bool "Ubiquiti Networks XM (rev 1.0) board"
++	bool "Ubiquiti Networks XM/UniFi boards"
+ 	select SOC_AR724X
++	select SOC_AR934X
+ 	select ATH79_DEV_AP9X_PCI if PCI
++	select ATH79_DEV_ETH
+ 	select ATH79_DEV_GPIO_BUTTONS
+ 	select ATH79_DEV_LEDS_GPIO
+ 	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
+ 	help
+ 	  Say 'Y' here if you want your kernel to support the
+ 	  Ubiquiti Networks XM (rev 1.0) board.