ar71xx: ubnt: move new board patches into one

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44315

1 files changed, 0 insertions, 140 deletions

diff --git a/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch b/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch
deleted file mode 100644
index 2054efe489..0000000000
--- a/target/linux/ar71xx/patches-3.14/616-MIPS-ath79-ubnt-xw.patch
+++ /dev/null
@@ -1,140 +0,0 @@
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -186,6 +186,19 @@ static struct gpio_led ubnt_unifi_outdoo
- 	}
- };
- 
-+static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
-+	{
-+		.name		= "ubnt:white:front",
-+		.gpio		= 1,
-+		.active_low	= 0,
-+	}, {
-+		.name		= "ubnt:blue:front",
-+		.gpio		= 0,
-+		.active_low	= 0,
-+	}
-+};
-+
-+
- static void __init ubnt_unifi_setup(void)
- {
- 	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-@@ -245,6 +258,38 @@ MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDO
- 	     "Ubiquiti UniFiAP Outdoor",
- 	     ubnt_unifi_outdoor_setup);
- 
-+
-+static void __init ubnt_unifi_outdoor_plus_setup(void)
-+{
-+	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
-+	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-+	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
-+				 UBNT_UNIFIOD_2ND_PHYMASK));
-+
-+	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-+	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-+	ath79_register_eth(0);
-+	ath79_register_eth(1);
-+
-+	ap91_pci_init(ee, NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
-+				 ubnt_unifi_outdoor_plus_leds_gpio);
-+
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
-+	     "Ubiquiti UniFiAP Outdoor+",
-+	     ubnt_unifi_outdoor_plus_setup);
-+
-+
- static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
- 	{
- 		.name		= "ubnt:white:dome",
-@@ -332,3 +377,78 @@ static void __init ubnt_uap_pro_setup(vo
- MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
- 	     ubnt_uap_pro_setup);
- 
-+#define UBNT_XW_GPIO_LED_L1		11
-+#define UBNT_XW_GPIO_LED_L2		16
-+#define UBNT_XW_GPIO_LED_L3		13
-+#define UBNT_XW_GPIO_LED_L4		14
-+
-+static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
-+	{
-+		.name		= "ubnt:red:link1",
-+		.gpio		= UBNT_XW_GPIO_LED_L1,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:orange:link2",
-+		.gpio		= UBNT_XW_GPIO_LED_L2,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:green:link3",
-+		.gpio		= UBNT_XW_GPIO_LED_L3,
-+		.active_low	= 1,
-+	}, {
-+		.name		= "ubnt:green:link4",
-+		.gpio		= UBNT_XW_GPIO_LED_L4,
-+		.active_low	= 1,
-+	},
-+};
-+
-+static void __init ubnt_xw_init(void)
-+{
-+	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+	ath79_register_m25p80(NULL);
-+
-+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
-+				 ubnt_xw_leds_gpio);
-+	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-+                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
-+                                        ubnt_xm_gpio_keys);
-+
-+	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
-+	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-+
-+
-+	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
-+	ath79_init_mac(ath79_eth0_data.mac_addr,
-+		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
-+
-+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+}
-+
-+static void __init ubnt_nano_m_xw_setup(void)
-+{
-+	ubnt_xw_init();
-+
-+	/* GMAC0 is connected to an AR8326 switch */
-+	ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
-+	ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
-+	ath79_eth0_data.speed = SPEED_100;
-+	ath79_eth0_data.duplex = DUPLEX_FULL;
-+	ath79_register_eth(0);
-+}
-+
-+static void __init ubnt_loco_m_xw_setup(void)
-+{
-+	ubnt_xw_init();
-+
-+	ath79_register_mdio(0, ~BIT(1));
-+	ath79_eth0_data.phy_mask = BIT(1);
-+	ath79_register_eth(0);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
-+	     ubnt_nano_m_xw_setup);
-+
-+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
-+	     ubnt_loco_m_xw_setup);