ar71xx: ubnt: move new board patches into one

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44315

1 files changed, 188 insertions, 4 deletions

diff --git a/target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
index d8d48f58e0..78035131db 100644
--- a/target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
+++ b/target/linux/ar71xx/patches-3.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/mach-ubnt-xm.c
 +++ b/arch/mips/ath79/mach-ubnt-xm.c
-@@ -12,16 +12,22 @@
+@@ -12,16 +12,24 @@
  
  #include <linux/init.h>
  #include <linux/pci.h>
@@ -9,9 +9,11 @@
 +#include <linux/etherdevice.h>
 +#include <linux/ar8216_platform.h>
  
++#include <asm/mach-ath79/ath79.h>
  #include <asm/mach-ath79/irq.h>
 +#include <asm/mach-ath79/ar71xx_regs.h>
  
++#include "common.h"
  #include "dev-ap9x-pci.h"
 +#include "dev-eth.h"
  #include "dev-gpio-buttons.h"
@@ -24,7 +26,7 @@
  
  #define UBNT_XM_GPIO_LED_L1		0
  #define UBNT_XM_GPIO_LED_L2		1
-@@ -37,19 +43,19 @@
+@@ -37,19 +45,19 @@
  
  static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
  	{
@@ -48,7 +50,7 @@
  		.gpio		= UBNT_XM_GPIO_LED_L4,
  		.active_low	= 0,
  	},
-@@ -66,9 +72,13 @@ static struct gpio_keys_button ubnt_xm_g
+@@ -66,9 +74,13 @@ static struct gpio_keys_button ubnt_xm_g
  	}
  };
  
@@ -62,7 +64,7 @@
  
  	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
  				 ubnt_xm_leds_gpio);
-@@ -79,9 +89,246 @@ static void __init ubnt_xm_init(void)
+@@ -79,9 +91,428 @@ static void __init ubnt_xm_init(void)
  
  	ath79_register_m25p80(NULL);
  	ap91_pci_init(eeprom, NULL);
@@ -163,6 +165,19 @@
 +	}
 +};
 +
++static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:white:front",
++		.gpio		= 1,
++		.active_low	= 0,
++	}, {
++		.name		= "ubnt:blue:front",
++		.gpio		= 0,
++		.active_low	= 0,
++	}
++};
++
++
 +static void __init ubnt_unifi_setup(void)
 +{
 +	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
@@ -222,6 +237,38 @@
 +	     "Ubiquiti UniFiAP Outdoor",
 +	     ubnt_unifi_outdoor_setup);
 +
++
++static void __init ubnt_unifi_outdoor_plus_setup(void)
++{
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
++				 UBNT_UNIFIOD_2ND_PHYMASK));
++
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
++	ath79_register_eth(0);
++	ath79_register_eth(1);
++
++	ap91_pci_init(ee, NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
++				 ubnt_unifi_outdoor_plus_leds_gpio);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
++	     "Ubiquiti UniFiAP Outdoor+",
++	     ubnt_unifi_outdoor_plus_setup);
++
++
 +static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
 +	{
 +		.name		= "ubnt:white:dome",
@@ -309,6 +356,143 @@
 +MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
 +	     ubnt_uap_pro_setup);
 +
++#define UBNT_XW_GPIO_LED_L1		11
++#define UBNT_XW_GPIO_LED_L2		16
++#define UBNT_XW_GPIO_LED_L3		13
++#define UBNT_XW_GPIO_LED_L4		14
++
++static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
++	{
++		.name		= "ubnt:red:link1",
++		.gpio		= UBNT_XW_GPIO_LED_L1,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:orange:link2",
++		.gpio		= UBNT_XW_GPIO_LED_L2,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link3",
++		.gpio		= UBNT_XW_GPIO_LED_L3,
++		.active_low	= 1,
++	}, {
++		.name		= "ubnt:green:link4",
++		.gpio		= UBNT_XW_GPIO_LED_L4,
++		.active_low	= 1,
++	},
++};
++
++static void __init ubnt_xw_init(void)
++{
++	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
++
++	ath79_register_m25p80(NULL);
++
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
++				 ubnt_xw_leds_gpio);
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
++                                        ubnt_xm_gpio_keys);
++
++	ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
++	ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
++
++
++	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
++	ath79_init_mac(ath79_eth0_data.mac_addr,
++		       eeprom + UAP_PRO_MAC0_OFFSET, 0);
++
++	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
++	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++}
++
++static void __init ubnt_nano_m_xw_setup(void)
++{
++	ubnt_xw_init();
++
++	/* GMAC0 is connected to an AR8326 switch */
++	ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
++	ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
++	ath79_eth0_data.speed = SPEED_100;
++	ath79_eth0_data.duplex = DUPLEX_FULL;
++	ath79_register_eth(0);
++}
++
++static void __init ubnt_loco_m_xw_setup(void)
++{
++	ubnt_xw_init();
++
++	ath79_register_mdio(0, ~BIT(1));
++	ath79_eth0_data.phy_mask = BIT(1);
++	ath79_register_eth(0);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
++	     ubnt_nano_m_xw_setup);
++
++MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
++	     ubnt_loco_m_xw_setup);
++
++static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
++	{
++		.name	   = "ubnt:blue:wlan",
++		.gpio	   = 0,
++	}, {
++		.name	   = "ubnt:white:status",
++		.gpio	   = 1,
++	},
++};
++
++static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
++	{
++		.desc		= "reset",
++		.type		= EV_KEY,
++		.code		= KEY_RESTART,
++		.debounce_interval	= UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
++		.gpio		= 12,
++		.active_low	= 1,
++	}
++};
++
++static void __init ubnt_airgateway_setup(void)
++{
++	u32 t;
++	u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
++	u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
++	u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
++
++
++	ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
++				     AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
++
++	t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++	t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
++	ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
++
++	ath79_register_m25p80(NULL);
++	ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
++				 ubnt_airgateway_gpio_leds);
++
++	ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
++					ARRAY_SIZE(airgateway_gpio_keys),
++					airgateway_gpio_keys);
++
++	ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
++	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
++
++	ath79_register_mdio(0, 0x0);
++
++	ath79_register_eth(1);
++	ath79_register_eth(0);
++
++	ath79_register_wmac(ee, NULL);
++}
++
++MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
++	     ubnt_airgateway_setup);
++
 --- a/arch/mips/ath79/Kconfig
 +++ b/arch/mips/ath79/Kconfig
 @@ -68,12 +68,16 @@ config ATH79_MACH_PB44