ar71xx: add support for 8devices Rambutan development board

Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan

This commit adds basic support for Rambutan development kit

Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header

Flash instructions:
Stock firmware is OpenWrt, so use:
 sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar
or upgarde from GUI (don't save config)
Use factory image to flash from U-Boot:
 tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi
 nand erase.part ubi
 nand write 80060000 ubi ${filesize}

Signed-off-by: Mantas Pucka <mantas@8devices.com>
[split support in uboot-envtools package into a separate commit,
fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

4 files changed, 102 insertions, 0 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 7c3aa77a3e..eb8219e363 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1897,6 +1897,16 @@ config ATH79_MACH_LIMA
 	select ATH79_DEV_WMAC
 	select ATH79_DEV_ETH
 
+config ATH79_MACH_RAMBUTAN
+	bool "8devices Rambutan board"
+	select SOC_QCA955X
+	select ATH79_DEV_AP9X_PCI if PCI
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_NFC
+	select ATH79_DEV_USB
+	select ATH79_DEV_WMAC
+
 config ATH79_MACH_CF_E316N_V2
 	bool "COMFAST CF-E316N v2 support"
 	select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 01ec1332b0..f503002288 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -137,6 +137,7 @@ obj-$(CONFIG_ATH79_MACH_MZK_W04NU)		+= mach-mzk-w04nu.o
 obj-$(CONFIG_ATH79_MACH_MZK_W300NH)		+= mach-mzk-w300nh.o
 obj-$(CONFIG_ATH79_MACH_NBG460N)		+= mach-nbg460n.o
 obj-$(CONFIG_ATH79_MACH_NBG6716)		+= mach-nbg6716.o
+obj-$(CONFIG_ATH79_MACH_RAMBUTAN)		+= mach-rambutan.o
 obj-$(CONFIG_ATH79_MACH_OM2P)			+= mach-om2p.o
 obj-$(CONFIG_ATH79_MACH_OM5P)			+= mach-om5p.o
 obj-$(CONFIG_ATH79_MACH_OM5P_AC)		+= mach-om5pac.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c
new file mode 100644
index 0000000000..103aeb44b9
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c
@@ -0,0 +1,90 @@
+/*
+ *  8devices Rambutan board support
+ *
+ *  Copyright (C) 2017 Mantas Pucka <mantas@8devices.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/platform/ar934x_nfc.h>
+#include <linux/ar8216_platform.h>
+#include <linux/platform_data/phy-at803x.h>
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-nfc.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+static struct at803x_platform_data rambutan_ar8032_data = {
+	.has_reset_gpio = 1,
+	.reset_gpio = 17,
+};
+
+static struct mdio_board_info rambutan_mdio0_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.0",
+		.phy_addr = 0,
+		.platform_data = &rambutan_ar8032_data,
+	},
+};
+
+static struct at803x_platform_data rambutan_ar8033_data = {
+	.has_reset_gpio = 1,
+	.reset_gpio = 23,
+};
+
+static struct mdio_board_info rambutan_mdio1_info[] = {
+	{
+		.bus_id = "ag71xx-mdio.1",
+		.phy_addr = 0,
+		.platform_data = &rambutan_ar8033_data,
+	},
+};
+
+static void __init rambutan_setup(void)
+{
+	ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
+	ath79_register_nfc();
+	ath79_register_usb();
+	ath79_register_pci();
+	ath79_register_wmac_simple();
+
+	mdiobus_register_board_info(rambutan_mdio0_info,
+				    ARRAY_SIZE(rambutan_mdio0_info));
+	mdiobus_register_board_info(rambutan_mdio1_info,
+				    ARRAY_SIZE(rambutan_mdio1_info));
+	ath79_register_mdio(0, 0x0);
+	ath79_register_mdio(1, 0x0);
+
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+	ath79_eth0_data.phy_mask = BIT(0);
+	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+	ath79_register_eth(0);
+
+	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+	ath79_eth1_data.phy_mask = BIT(0);
+	ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
+	ath79_eth1_pll_data.pll_1000 = 0x17000000;
+	ath79_eth1_pll_data.pll_10 = 0x1313;
+	ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_RAMBUTAN, "RAMBUTAN", "8devices Rambutan board",
+	     rambutan_setup);
+
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 694470d75b..4f0ae32d45 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -155,6 +155,7 @@ enum ath79_mach_type {
 	ATH79_MACH_QIHOO_C301,			/* Qihoo 360 C301 */
 	ATH79_MACH_R602N,			/* P&W R602N */
 	ATH79_MACH_R6100,			/* NETGEAR R6100 */
+	ATH79_MACH_RAMBUTAN,			/* 8devices Rambutan */
 	ATH79_MACH_RB_2011G,			/* Mikrotik RouterBOARD 2011UAS-2HnD */
 	ATH79_MACH_RB_2011L,			/* Mikrotik RouterBOARD 2011L */
 	ATH79_MACH_RB_2011R5,			/* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */