diff options
author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:11:21 +0800 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-07-30 10:43:36 +0200 |
commit | ac03d51a3f4daa2f6a2a83f041dcd71674a9f724 (patch) | |
tree | 02a91d8c90dfb5b7d8240fd514a4915af5ffacc1 /target/linux/ar71xx/files | |
parent | b74f63f81d6121b5eace3f0c0c87399f7e0fde92 (diff) | |
download | upstream-ac03d51a3f4daa2f6a2a83f041dcd71674a9f724.tar.gz upstream-ac03d51a3f4daa2f6a2a83f041dcd71674a9f724.tar.bz2 upstream-ac03d51a3f4daa2f6a2a83f041dcd71674a9f724.zip |
ar71xx:add support for E750A v4
Qxwlan E750A v4 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 5G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
Diffstat (limited to 'target/linux/ar71xx/files')
4 files changed, 135 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 3cd90a446b..db410b6607 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -733,6 +733,17 @@ config ATH79_MACH_E600G_V2 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_E750A_V4 + bool "Qxwlan E750A v4 support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_ESR900 bool "EnGenius ESR900 board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 690738e1e6..4453e369a3 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -114,6 +114,7 @@ obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o obj-$(CONFIG_ATH79_MACH_E1700AC_V2) += mach-e1700ac-v2.o obj-$(CONFIG_ATH79_MACH_E558_V2) += mach-e558-v2.o obj-$(CONFIG_ATH79_MACH_E600G_V2) += mach-e600g-v2.o +obj-$(CONFIG_ATH79_MACH_E750A_V4) += mach-e750a-v4.o obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c new file mode 100644 index 0000000000..7cf3292c68 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c @@ -0,0 +1,122 @@ +/* + * Qxwlan E750A v4 board support + * + * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/phy.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define E750A_V4_GPIO_LED_SYS 14 +#define E750A_V4_GPIO_LED_LAN 19 +#define E750A_V4_GPIO_LED_WAN 18 +#define E750A_V4_GPIO_LED_DS10 15 +#define E750A_V4_GPIO_LED_DS20 20 +#define E750A_V4_GPIO_LED_WLAN 21 + +#define E750A_V4_GPIO_BTN_RESET 12 + +#define E750A_V4_KEYS_POLL_INTERVAL 20 /* msecs */ +#define E750A_V4_KEYS_DEBOUNCE_INTERVAL (3 * E750A_V4_KEYS_POLL_INTERVAL) + +static struct gpio_led e750a_v4_leds_gpio[] __initdata = { + { + .name = "e750a-v4:green:system", + .gpio = E750A_V4_GPIO_LED_SYS, + .active_low = 1, + }, + { + .name = "e750a-v4:green:lan", + .gpio = E750A_V4_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "e750a-v4:green:wan", + .gpio = E750A_V4_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "e750a-v4:green:wlan", + .gpio = E750A_V4_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "e750a-v4:green:ds10", + .gpio = E750A_V4_GPIO_LED_DS10, + .active_low = 1, + }, + { + .name = "e750a-v4:green:ds20", + .gpio = E750A_V4_GPIO_LED_DS20, + .active_low = 1, + }, +}; + +static struct gpio_keys_button e750a_v4_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = E750A_V4_KEYS_DEBOUNCE_INTERVAL, + .gpio = E750A_V4_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + + +static void __init e750a_v4_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f050400); + u8 *art = (u8 *) KSEG1ADDR(0x1f061000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(e750a_v4_leds_gpio), + e750a_v4_leds_gpio); + ath79_register_gpio_keys_polled(-1, E750A_V4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(e750a_v4_gpio_keys), + e750a_v4_gpio_keys); + + ath79_register_mdio(1, 0x0); + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + ath79_register_eth(1); + + /* GMAC0 is connected to the PHY4 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_register_eth(0); + + ath79_register_pci(); + ath79_register_usb(); + ath79_register_wmac(art, NULL); +} + +MIPS_MACHINE(ATH79_MACH_E750A_V4, "E750A-V4", "Qxlan E750A v4", + e750a_v4_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index de1efab3a2..d304b9eb80 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -108,6 +108,7 @@ enum ath79_mach_type { ATH79_MACH_E558_V2, /* Qxwlan E558 v2 */ ATH79_MACH_E600G_V2, /* Qxwlan E600G v2 */ ATH79_MACH_E600GAC_V2, /* Qxwlan E600GAC v2 */ + ATH79_MACH_E750A_V4, /* Qxwlan E750A v4 */ ATH79_MACH_EAP120, /* TP-LINK EAP120 */ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ |