diff options
author | David Ehrmann <ehrmann@gmail.com> | 2018-06-09 18:33:24 -0700 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-06-19 14:32:47 +0200 |
commit | 81d446b045176e3e25bb0ef74e3d060b51a0a353 (patch) | |
tree | 756ae3bcfa682fbf9be541577a934394883e00e4 /target/linux/ar71xx/files | |
parent | 9a4253b81f3b3fff833ef92737ef73ad4c455ade (diff) | |
download | upstream-81d446b045176e3e25bb0ef74e3d060b51a0a353.tar.gz upstream-81d446b045176e3e25bb0ef74e3d060b51a0a353.tar.bz2 upstream-81d446b045176e3e25bb0ef74e3d060b51a0a353.zip |
ar71x: add support for Mikrotik Routerboard wAP R
This commit adds support for the Mikrotik wAP R (RBwAPR-2nD). The change
is based on 3b15eb0 which added support for the wAP 2nD. This change lacks
LED support.
Specifications:
- SoC: Qualcomm QCA9531 (650 MHz)
- RAM: 64 MB
- Storage: 16 MB NOR SPI flash
- Wireless: built-in QCA9531, 802.11b/g/n 2x2:2
- Ethernet: 1x100Mbps
- Power: 9-30V Passive PoE, 9-30V DC jack, 9-30V automotive jack
- SIM card slot
- Mini-PCIe slot
Installation:
1. Login to the Mikrotik WebUI to backup your licence key
2. Change the following settings in System->Routerboard->Settings:
- Boot device: try ethernet once then NAND
- Boot protocol: DHCP
- Force Backup Booter: checked
3. Setup a DHCP/BOOTP server with:
- DHCP-Option 66 (TFTP server name) pointing to a local TFTP
server within the same subnet of the DHCP range
- DHCP-Option 67 (Bootfile-Name) matching the initramfs filename
of the to be booted image, e.g.
openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf
4. Power off the device
5. If this is the second attempt to boot OpenWRT or the boot device isn't
"try ethernet once then NAND," press and hold the reset button while
powered off. If this is the first attempt, this step isn't necessary.
6. Power on the device, holding the reset button for 15-20s if already
pressed from the previous step.
The board should load and start the initramfs image from the TFTP
server. Login as root/without password to the started OpenWRT via SSH
listing on IPv4 address 192.168.1.1. Use sysupgrade to install OpenWRT.
Revert to RouterOS
Use the "rbcfg" package on in OpenWRT:
- rbcfg set boot_protocol bootp
- rbcfg set boot_device ethnand
- rbcfg apply
Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD
and you can install RouterOS. If NetInstall gets stuck on Sending offer
just wait for it to timeout and then close and open Netinstall again.
Click on install again.
In order for RouterOS to function properly, you need to restore license
for the device. You can do that by including license in NetInstall.
Signed-off-by: David Ehrmann <ehrmann@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/files')
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 1 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c | 2 | ||||
-rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 |
3 files changed, 4 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 153569b9ca..4146f0186d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1143,6 +1143,7 @@ config ATH79_MACH_RBSPI MikroTik RouterBOARD LHG 5 MikroTik RouterBOARD cAP (EXPERIMENTAL) MikroTik RouterBOARD wAP + MikroTik RouterBOARD wAP R-2nD config ATH79_MACH_RBSXTLITE bool "MikroTik RouterBOARD SXT Lite" diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index f7f3b028f4..d0fac59f9e 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -15,6 +15,7 @@ * - MikroTik RouterBOARD LHG 5nD * - MikroTik RouterBOARD wAP2nD * - MikroTik RouterBOARD wAP G-5HacT2HnDwAP (wAP AC) + * - MikroTik RouterBOARD wAP R-2nD * * Preliminary support for the following hardware * - MikroTik RouterBOARD cAP2nD @@ -1119,6 +1120,7 @@ MIPS_MACHINE_NONAME(ATH79_MACH_RB_962, "962", rb962_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5, "lhg", rblhg_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPR, "wap-lte", rbwap_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPAC, "wapg-sc", rbwapgsc_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index d29288e3e7..992e080640 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -219,6 +219,7 @@ enum ath79_mach_type { ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */ ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */ ATH79_MACH_RB_WAP, /* Mikrotik RouterBOARD wAP2nD */ + ATH79_MACH_RB_WAPR, /* Mikrotik RouterBOARD wAPR2nD */ ATH79_MACH_RB_WAPAC, /* Mikrotik RouterBOARD wAPG-5HacT2HnD */ ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */ ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ |