aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2016-10-06 02:19:17 +0200
committerJohn Crispin <john@phrozen.org>2016-11-21 10:05:40 +0100
commit01dda0659eb7d029672af3bd3b590d98e2ee0a5d (patch)
tree9b8fe4c36ee3a15a34bc97606489d3a98be1c14e /target/linux/ar71xx/files
parent16afa08d19b4f7bf256a89749e76ff8421ece013 (diff)
downloadupstream-01dda0659eb7d029672af3bd3b590d98e2ee0a5d.tar.gz
upstream-01dda0659eb7d029672af3bd3b590d98e2ee0a5d.tar.bz2
upstream-01dda0659eb7d029672af3bd3b590d98e2ee0a5d.zip
ar71xx: add support for YunCore AP90Q
YunCore AP90Q is an outdoor CPE/AP based on Qualcomm/Atheros QCA9531 v2. Short specification: - 650/600/216 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz with external PA, up to 29 dBm - 2x internal 5 dBi omni antennas - 4x LED, 1x button - UART (JP1) header on PCB Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-generic-ap90q-squashfs-sysupgrade 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Flash instruction under vendor fimrware, using telnet/SSH: 1. Connect PC with 192.168.1.x address to WAN port 2. Power up device, enter failsafe mode with button (no LED indicator!) 3. Change root password and reboot (mount_root, passwd ..., reboot -f) 4. Upload lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin to /tmp using SCP 5. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 6. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9f050000" - mtd erase firmware - mtd -r write lede-ar71xx-generic-ap90q-squashfs-sysupgrade.bin firmware Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/files')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c123
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
4 files changed, 134 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 3a3ed14b41..e9431f139e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -174,6 +174,15 @@ config ATH79_MACH_AP83
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_AP90Q
+ bool "YunCore AP90Q support"
+ select SOC_QCA953X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_AP96
bool "Atheros AP96 board support"
select SOC_AR71XX
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 1924179cf3..c0caccdb23 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
obj-$(CONFIG_ATH79_MACH_AP83) += mach-ap83.o
+obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
new file mode 100644
index 0000000000..35e578122e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
@@ -0,0 +1,123 @@
+/*
+ * YunCore AP90Q board support
+ *
+ * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP90Q_GPIO_LED_WAN 4
+#define AP90Q_GPIO_LED_WLAN 12
+#define AP90Q_GPIO_LED_LAN 16
+
+#define AP90Q_GPIO_BTN_RESET 17
+
+#define AP90Q_KEYS_POLL_INTERVAL 20
+#define AP90Q_KEYS_DEBOUNCE_INTERVAL (3 * AP90Q_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ap90q_leds_gpio[] __initdata = {
+ {
+ .name = "ap90q:green:lan",
+ .gpio = AP90Q_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "ap90q:green:wan",
+ .gpio = AP90Q_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "ap90q:green:wlan",
+ .gpio = AP90Q_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button ap90q_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP90Q_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP90Q_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init ap90q_gpio_setup(void)
+{
+ /* For LED on GPIO4 */
+ ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
+
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true);
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true);
+ ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true);
+
+ /* Mute LEDs on boot */
+ gpio_set_value(AP90Q_GPIO_LED_LAN, 1);
+ gpio_set_value(AP90Q_GPIO_LED_WAN, 1);
+
+ ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0);
+ ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0);
+ ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio),
+ ap90q_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap90q_gpio_keys),
+ ap90q_gpio_keys);
+}
+
+static void __init ap90q_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ap90q_gpio_setup();
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+
+ /* LAN */
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP90Q", ap90q_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 5e504b1242..e69cf3bece 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -38,6 +38,7 @@ enum ath79_mach_type {
ATH79_MACH_AP152, /* Atheros AP152 reference board */
ATH79_MACH_AP81, /* Atheros AP81 reference board */
ATH79_MACH_AP83, /* Atheros AP83 */
+ ATH79_MACH_AP90Q, /* YunCore AP90Q */
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */