ar71xx: add kernel support for Netgear WNDAP360

Here is corrected version (only thing not working are wifi LEDs).

[juhosg: this has been created from the following patch:
http://patchwork.openwrt.org/patch/3620/ ]

Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36578

1 files changed, 105 insertions, 0 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c
new file mode 100644
index 0000000000..3d8d6b0af1
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c
@@ -0,0 +1,105 @@
+/*
+ *  Netgear WNDAP360 board support (proper leds / button support missing)
+ *
+ *  Based on AP96
+ *  Copyright (C) 2013 Jacek Kikiewicz
+ *  Copyright (C) 2009 Marco Porsch
+ *  Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Atheros Communications
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WNDAP360_GPIO_LED_POWER_ORANGE		0
+#define WNDAP360_GPIO_LED_POWER_GREEN		2
+
+/* Reset button - next to the power connector */
+#define WNDAP360_GPIO_BTN_RESET		3
+/* WPS button - next to a led on right */
+#define WNDAP360_GPIO_BTN_WPS		8
+
+#define WNDAP360_KEYS_POLL_INTERVAL		20	/* msecs */
+#define WNDAP360_KEYS_DEBOUNCE_INTERVAL	(3 * WNDAP360_KEYS_POLL_INTERVAL)
+
+#define WNDAP360_WMAC0_MAC_OFFSET		0x120c
+#define WNDAP360_WMAC1_MAC_OFFSET		0x520c
+#define WNDAP360_CALDATA0_OFFSET		0x1000
+#define WNDAP360_CALDATA1_OFFSET		0x5000
+
+/*
+ * WNDAP360 this still uses leds definitions from AP96
+ *
+ */
+static struct gpio_led wndap360_leds_gpio[] __initdata = {
+	{
+		.name		= "wndap360:green:power",
+		.gpio		= WNDAP360_GPIO_LED_POWER_GREEN,
+		.active_low	= 1,
+	}, {
+		.name		= "wndap360:orange:power",
+		.gpio		= WNDAP360_GPIO_LED_POWER_ORANGE,
+		.active_low	= 1,
+        }
+};
+
+static struct gpio_keys_button wndap360_gpio_keys[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= WNDAP360_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}
+};
+
+#define WNDAP360_LAN_PHYMASK 0x0f
+
+static void __init wndap360_setup(void)
+{
+	u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK));
+
+	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+	ath79_eth0_pll_data.pll_1000 = 0x11110000;
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK;
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+
+	ath79_register_eth(0);
+
+	ath79_register_usb();
+
+	ath79_register_m25p80(NULL);
+
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio),
+					wndap360_leds_gpio);
+
+	ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL,
+					 ARRAY_SIZE(wndap360_gpio_keys),
+					 wndap360_gpio_keys);
+
+	ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET,
+		      art + WNDAP360_WMAC0_MAC_OFFSET,
+		      art + WNDAP360_CALDATA1_OFFSET,
+		      art + WNDAP360_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "Netgear WNDAP360", wndap360_setup);