aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2016-03-16 09:27:14 +0000
committerJohn Crispin <john@openwrt.org>2016-03-16 09:27:14 +0000
commit4d6c4994fc609ac40884631ced2d4e4127c8958e (patch)
tree6da1e874f0939f02862eee5ccd6a0717dbd122cf /target/linux/ar71xx/files
parentebcce35be48abbd948d6c50ac2d1737f4850e028 (diff)
downloadupstream-4d6c4994fc609ac40884631ced2d4e4127c8958e.tar.gz
upstream-4d6c4994fc609ac40884631ced2d4e4127c8958e.tar.bz2
upstream-4d6c4994fc609ac40884631ced2d4e4127c8958e.zip
ar71xx: Use PHY fixups for Open Mesh MR1750
The delays of PHY/MAC on the MR1750 are done by u-boot and OpenWrt in different ways. u-boot only modifies the ETH_CFG of the QCA955x based on the link speed. But OpenWrt can only modify the PHY delays based on the link speed. This can lead to communication problems when u-boot initializes the ETH_CFG for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY delays to an incompatible value. Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and only rely on the AT803x PHY settings. Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49031
Diffstat (limited to 'target/linux/ar71xx/files')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c25
1 files changed, 22 insertions, 3 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
index 8db291509f..83acd4cc34 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
@@ -22,6 +22,7 @@
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/platform_data/phy-at803x.h>
#include "common.h"
#include "dev-ap9x-pci.h"
@@ -92,14 +93,29 @@ static struct gpio_keys_button mr1750_gpio_keys[] __initdata = {
},
};
+static struct at803x_platform_data mr1750_at803x_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 1,
+ .enable_rgmii_tx_delay = 0,
+ .fixup_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info mr1750_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 5,
+ .platform_data = &mr1750_at803x_data,
+ },
+};
+
static void __init mr1750_setup(void)
{
u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
u8 mac[6];
- ath79_eth0_pll_data.pll_1000 = 0xbe000101;
- ath79_eth0_pll_data.pll_100 = 0x80000101;
- ath79_eth0_pll_data.pll_10 = 0x80001313;
+ ath79_eth0_pll_data.pll_1000 = 0xae000000;
+ ath79_eth0_pll_data.pll_100 = 0xa0000101;
+ ath79_eth0_pll_data.pll_10 = 0xa0001313;
ath79_register_m25p80(NULL);
@@ -116,6 +132,9 @@ static void __init mr1750_setup(void)
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(mr1750_mdio0_info,
+ ARRAY_SIZE(mr1750_mdio0_info));
+
ath79_init_mac(ath79_eth0_data.mac_addr, art + MR1750_MAC0_OFFSET, 0);
/* GMAC0 is connected to the RMGII interface */