aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2014-04-13 20:41:52 +0000
committerGabor Juhos <juhosg@openwrt.org>2014-04-13 20:41:52 +0000
commitf5c08bb572cef2541da9b7e7377608221c021c89 (patch)
treeab8f4c56f97d5998d9929854605b564a28960faa /target/linux/ar71xx/files
parentbda46948beff6c3b9c0d1642b5cce0a2ef2f1502 (diff)
downloadupstream-f5c08bb572cef2541da9b7e7377608221c021c89.tar.gz
upstream-f5c08bb572cef2541da9b7e7377608221c021c89.tar.bz2
upstream-f5c08bb572cef2541da9b7e7377608221c021c89.zip
ar71xx: rb91x: fix ethernet packet loss issues
The RB91x boards are suffering from ethernet packet loss after a cold boot. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register to fix the issue. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40509 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ar71xx/files')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c19
1 files changed, 19 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
index 75382bef93..9ef5c4455e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
@@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-latch.h>
#include <linux/platform_data/rb91x_nand.h>
+#include <linux/platform_data/phy-at803x.h>
#include <asm/prom.h>
#include <asm/mach-ath79/ath79.h>
@@ -223,6 +224,20 @@ static struct gpio_led rb711gr100_leds[] __initdata = {
},
};
+static struct at803x_platform_data rb91x_at803x_data = {
+ .disable_smarteee = 1,
+ .enable_rgmii_rx_delay = 1,
+ .enable_rgmii_tx_delay = 1,
+};
+
+static struct mdio_board_info rb91x_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &rb91x_at803x_data,
+ },
+};
+
static void __init rb711gr100_init_partitions(const struct rb_info *info)
{
rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
@@ -293,10 +308,14 @@ static void __init rb711gr100_setup(void)
ARRAY_SIZE(rb711gr100_spi_info));
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_RXD_DELAY |
AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(0, 0x0);
+ mdiobus_register_board_info(rb91x_mdio0_info,
+ ARRAY_SIZE(rb91x_mdio0_info));
+
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);