aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files/arch
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2012-08-01 12:24:52 +0000
committerGabor Juhos <juhosg@openwrt.org>2012-08-01 12:24:52 +0000
commitdce7a40da213a73e2fcb2f06fcbd1cc7515e690d (patch)
treeb1f32950db42bc75b8ea7f3c8fdc0adeab2b2470 /target/linux/ar71xx/files/arch
parentfb8c91abdda242279fb5aba5be3d41f1558dfa2a (diff)
downloadupstream-dce7a40da213a73e2fcb2f06fcbd1cc7515e690d.tar.gz
upstream-dce7a40da213a73e2fcb2f06fcbd1cc7515e690d.tar.bz2
upstream-dce7a40da213a73e2fcb2f06fcbd1cc7515e690d.zip
ar71xx: Buffalo WLAE-AG300N initial support
The patch set for Buffalo WLAE-AG300N initial support. There is another patch for wireless led support that is posted separately. Note on serial console: This unit has buffalo standard 4 pin console, but the unit may not power on if some console apparatus is connected. This is probably due to some electronic interaction between the unit's electronic power switch circuit and the serial console apparatus. If this happens, it is required to power on the unit without the console, then quickly (re-)attach it. [juhosg: fix coding style] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32931 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ar71xx/files/arch')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c114
1 files changed, 114 insertions, 0 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
new file mode 100644
index 0000000000..11006fd1bc
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
@@ -0,0 +1,114 @@
+/*
+ * Buffalo WLAE-AG300N board support
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WLAEAG300N_MAC_OFFSET 0x20c
+#define WLAEAG300N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
+
+
+static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
+ /*
+ * Note: Writing 1 into GPIO 13 will power down the device.
+ */
+ {
+ .name = "buffalo:green:wireless",
+ .gpio = 14,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:wireless",
+ .gpio = 15,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:status",
+ .gpio = 16,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:status",
+ .gpio = 17,
+ .active_low = 1,
+ }
+};
+
+
+static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
+ {
+ .desc = "function",
+ .type = EV_KEY,
+ .code = KEY_MODE,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 0,
+ .active_low = 1,
+ }, {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "power",
+ .type = EV_KEY,
+ .code = KEY_POWER,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 12,
+ .active_low = 1,
+ }
+};
+
+static void __init wlaeag300n_setup(void)
+{
+ u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
+
+ ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = BIT(4);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
+ wlaeag300n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wlaeag300n_gpio_keys),
+ wlaeag300n_gpio_keys);
+
+ ath79_register_m25p80(NULL);
+
+ ap91_pci_init(eeprom1, mac1);
+}
+
+MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
+ "Buffalo WLAE-AG300N", wlaeag300n_setup);