ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 114 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
deleted file mode 100644
index 11006fd1bc..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- *  Buffalo WLAE-AG300N board support
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WLAEAG300N_MAC_OFFSET		0x20c
-#define WLAEAG300N_KEYS_POLL_INTERVAL	20      /* msecs */
-#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
-
-
-static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
-	/*
-	 * Note: Writing 1 into GPIO 13 will power down the device.
-	 */
-	{
-		.name		= "buffalo:green:wireless",
-		.gpio		= 14,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:red:wireless",
-		.gpio		= 15,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:green:status",
-		.gpio		= 16,
-		.active_low	= 1,
-	}, {
-		.name		= "buffalo:red:status",
-		.gpio		= 17,
-		.active_low	= 1,
-	}
-};
-
-
-static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
-	{
-		.desc		= "function",
-		.type		= EV_KEY,
-		.code		= KEY_MODE,
-		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 0,
-		.active_low	= 1,
-	}, {
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 1,
-		.active_low	= 1,
-	}, {
-		.desc		= "power",
-		.type		= EV_KEY,
-		.code		= KEY_POWER,
-		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 11,
-		.active_low	= 1,
-	}, {
-		.desc		= "aoss",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= 12,
-		.active_low	= 1,
-	}
-};
-
-static void __init wlaeag300n_setup(void)
-{
-	u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
-
-	ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
-
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-	ath79_eth0_data.phy_mask = BIT(0);
-
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = BIT(4);
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
-					wlaeag300n_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
-					 ARRAY_SIZE(wlaeag300n_gpio_keys),
-					 wlaeag300n_gpio_keys);
-
-	ath79_register_m25p80(NULL);
-
-	ap91_pci_init(eeprom1, mac1);
-}
-
-MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
-	     "Buffalo WLAE-AG300N", wlaeag300n_setup);