diff options
author | 张鹏 <sd20@qxwlan.com> | 2018-07-17 18:14:25 +0800 |
---|---|---|
committer | John Crispin <john@phrozen.org> | 2018-07-30 10:43:36 +0200 |
commit | 53a45020135b504cb4bee0fa8d98c8eaf6391066 (patch) | |
tree | 2cbde3c8b5b912e572871a9ca5b28a0e812e0640 /target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c | |
parent | ac03d51a3f4daa2f6a2a83f041dcd71674a9f724 (diff) | |
download | upstream-53a45020135b504cb4bee0fa8d98c8eaf6391066.tar.gz upstream-53a45020135b504cb4bee0fa8d98c8eaf6391066.tar.bz2 upstream-53a45020135b504cb4bee0fa8d98c8eaf6391066.zip |
ar71xx:add support for E750G v8
Qxwlan E750G v8 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (PoE support)
- 2x 10/100/1000 Mbps Ethernet
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c')
0 files changed, 0 insertions, 0 deletions