ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 361 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
deleted file mode 100644
index 1c1cae1e76..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- *  MikroTik RouterBOARD 92X support
- *
- *  Copyright (C) 2015 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/phy.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/routerboot.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/version.h>
-
-#include <asm/prom.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-spi.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "routerboot.h"
-
-#define RB922_GPIO_LED_USR	12
-#define RB922_GPIO_USB_POWER	13
-#define RB922_GPIO_FAN_CTRL	14
-#define RB922_GPIO_BTN_RESET	20
-#define RB922_GPIO_NAND_NCE	23
-
-#define RB92X_FLAG_USB		BIT(0)
-#define RB92X_FLAG_USB_POWER	BIT(1)
-#define RB92X_FLAG_PCIE		BIT(2)
-
-#define RB922_PHY_ADDR		4
-
-#define RB922_KEYS_POLL_INTERVAL	20	/* msecs */
-#define RB922_KEYS_DEBOUNCE_INTERVAL	(3 * RB922_KEYS_POLL_INTERVAL)
-
-#define RB_ROUTERBOOT_OFFSET	0x0000
-#define RB_ROUTERBOOT_MIN_SIZE	0xb000
-#define RB_HARD_CFG_SIZE	0x1000
-#define RB_BIOS_OFFSET		0xd000
-#define RB_BIOS_SIZE		0x1000
-#define RB_SOFT_CFG_OFFSET	0xf000
-#define RB_SOFT_CFG_SIZE	0x1000
-
-struct rb_board_info {
-        const char *name;
-        u32 flags;
-};
-
-static struct mtd_partition rb922gs_spi_partitions[] = {
-	{
-		.name		= "routerboot",
-		.offset		= RB_ROUTERBOOT_OFFSET,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "hard_config",
-		.size		= RB_HARD_CFG_SIZE,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "bios",
-		.offset		= RB_BIOS_OFFSET,
-		.size		= RB_BIOS_SIZE,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "soft_config",
-		.size		= RB_SOFT_CFG_SIZE,
-	}
-};
-
-static void __init rb922gs_init_partitions(const struct rb_info *info)
-{
-	rb922gs_spi_partitions[0].size = info->hard_cfg_offs;
-	rb922gs_spi_partitions[1].offset = info->hard_cfg_offs;
-	rb922gs_spi_partitions[3].offset = info->soft_cfg_offs;
-}
-
-static struct mtd_partition rb922gs_nand_partitions[] = {
-	{
-		.name	= "booter",
-		.offset	= 0,
-		.size	= (256 * 1024),
-		.mask_flags = MTD_WRITEABLE,
-	},
-	{
-		.name	= "kernel",
-		.offset	= (256 * 1024),
-		.size	= (4 * 1024 * 1024) - (256 * 1024),
-	},
-	{
-		.name	= "ubi",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct flash_platform_data rb922gs_spi_flash_data = {
-	.parts		= rb922gs_spi_partitions,
-	.nr_parts	= ARRAY_SIZE(rb922gs_spi_partitions),
-};
-
-static struct gpio_led rb922gs_leds[] __initdata = {
-	{
-		.name		= "rb:green:user",
-		.gpio		= RB922_GPIO_LED_USR,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button rb922gs_gpio_keys[] __initdata = {
-	{
-		.desc		= "Reset button",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = RB922_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= RB922_GPIO_BTN_RESET,
-		.active_low	= 1,
-	},
-};
-
-static struct at803x_platform_data rb922gs_at803x_data = {
-	.disable_smarteee = 1,
-};
-
-static struct mdio_board_info rb922gs_mdio0_info[] = {
-	{
-		.bus_id = "ag71xx-mdio.0",
-		.mdio_addr = RB922_PHY_ADDR,
-		.platform_data = &rb922gs_at803x_data,
-	},
-};
-
-
-
-static void rb922gs_nand_select_chip(int chip_no)
-{
-	switch (chip_no) {
-	case 0:
-		gpio_set_value(RB922_GPIO_NAND_NCE, 0);
-		break;
-	default:
-		gpio_set_value(RB922_GPIO_NAND_NCE, 1);
-		break;
-	}
-	ndelay(500);
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-static struct nand_ecclayout rb922gs_nand_ecclayout = {
-	.eccbytes	= 6,
-	.eccpos		= { 8, 9, 10, 13, 14, 15 },
-	.oobavail	= 9,
-	.oobfree	= { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-#else
-
-static int rb922gs_ooblayout_ecc(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	switch (section) {
-	case 0:
-		oobregion->offset = 8;
-		oobregion->length = 3;
-		return 0;
-	case 1:
-		oobregion->offset = 13;
-		oobregion->length = 3;
-		return 0;
-	default:
-		return -ERANGE;
-	}
-}
-
-static int rb922gs_ooblayout_free(struct mtd_info *mtd, int section,
-				  struct mtd_oob_region *oobregion)
-{
-	switch (section) {
-	case 0:
-		oobregion->offset = 0;
-		oobregion->length = 4;
-		return 0;
-	case 1:
-		oobregion->offset = 4;
-		oobregion->length = 1;
-		return 0;
-	case 2:
-		oobregion->offset = 6;
-		oobregion->length = 2;
-		return 0;
-	case 3:
-		oobregion->offset = 11;
-		oobregion->length = 2;
-		return 0;
-	default:
-		return -ERANGE;
-	}
-}
-
-static const struct mtd_ooblayout_ops rb922gs_nand_ecclayout_ops = {
-	.ecc = rb922gs_ooblayout_ecc,
-	.free = rb922gs_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static int rb922gs_nand_scan_fixup(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-	struct nand_chip *chip = mtd->priv;
-#else
-	struct nand_chip *chip = mtd_to_nand(mtd);
-#endif /* < 4.6.0 */
-
-	if (mtd->writesize == 512) {
-		/*
-		 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
-		 * will not be able to find the kernel that we load.
-		 */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-		chip->ecc.layout = &rb922gs_nand_ecclayout;
-#else
-		mtd_set_ooblayout(mtd, &rb922gs_nand_ecclayout_ops);
-#endif
-	}
-
-	chip->options = NAND_NO_SUBPAGE_WRITE;
-
-	return 0;
-}
-
-static void __init rb922gs_nand_init(void)
-{
-	gpio_request_one(RB922_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
-
-	ath79_nfc_set_scan_fixup(rb922gs_nand_scan_fixup);
-	ath79_nfc_set_parts(rb922gs_nand_partitions,
-			    ARRAY_SIZE(rb922gs_nand_partitions));
-	ath79_nfc_set_select_chip(rb922gs_nand_select_chip);
-	ath79_nfc_set_swap_dma(true);
-	ath79_register_nfc();
-}
-
-#define RB_BOARD_INFO(_name, _flags)    \
-        {                               \
-                .name = (_name),        \
-                .flags = (_flags),      \
-        }
-
-static const struct rb_board_info rb92x_boards[] __initconst = {
-        RB_BOARD_INFO("921GS-5HPacD r2", RB92X_FLAG_PCIE),
-        RB_BOARD_INFO("922UAGS-5HPacD", RB92X_FLAG_USB | RB92X_FLAG_USB_POWER | RB92X_FLAG_PCIE),
-};
-
-static u32 rb92x_get_flags(const struct rb_info *info)
-{
-        int i;
-
-        for (i = 0; i < ARRAY_SIZE(rb92x_boards); i++) {
-                const struct rb_board_info *bi;
-
-                bi = &rb92x_boards[i];
-                if (strcmp(info->board_name, bi->name) == 0)
-                        return bi->flags;
-        }
-
-        return 0;
-}
-
-static void __init rb922gs_setup(void)
-{
-	const struct rb_info *info;
-	char buf[64];
-	u32 flags;
-
-	info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
-	if (!info)
-		return;
-
-	scnprintf(buf, sizeof(buf), "MikroTik RouterBOARD %s",
-		  (info->board_name) ? info->board_name : "");
-	mips_set_machine_name(buf);
-
-	rb922gs_init_partitions(info);
-	ath79_register_m25p80(&rb922gs_spi_flash_data);
-
-	rb922gs_nand_init();
-
-	ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
-	ath79_register_mdio(0, 0x0);
-
-	mdiobus_register_board_info(rb922gs_mdio0_info,
-				    ARRAY_SIZE(rb922gs_mdio0_info));
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = BIT(RB922_PHY_ADDR);
-	if (strcmp(info->board_name, "921GS-5HPacD r2") == 0 ||
-	    strcmp(info->board_name, "922UAGS-5HPacD") == 0)
-	{
-		ath79_eth0_pll_data.pll_10 = 0xa0001313;
-		ath79_eth0_pll_data.pll_100 = 0xa0000101;
-		ath79_eth0_pll_data.pll_1000 = 0x8f000000;
-	}
-	else {
-		ath79_eth0_pll_data.pll_10 = 0x81001313;
-		ath79_eth0_pll_data.pll_100 = 0x81000101;
-		ath79_eth0_pll_data.pll_1000 = 0x8f000000;
-	}
-
-	ath79_register_eth(0);
-
-	flags = rb92x_get_flags(info);
-
-        if (flags & RB92X_FLAG_USB)
-                ath79_register_usb();
-
-        if (flags & RB92X_FLAG_USB_POWER)
-                gpio_request_one(RB922_GPIO_USB_POWER, GPIOF_OUT_INIT_LOW |
-			GPIOF_EXPORT_DIR_FIXED, "USB power");
-
-        if (flags & RB92X_FLAG_PCIE)
-                ath79_register_pci();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(rb922gs_leds), rb922gs_leds);
-	ath79_register_gpio_keys_polled(-1, RB922_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(rb922gs_gpio_keys),
-					rb922gs_gpio_keys);
-
-	/* NOTE:
-	 * This only supports the RB911G-5HPacD board for now. For other boards
-	 * more devices must be registered based on the hardware options which
-	 * can be found in the hardware configuration of RouterBOOT.
-	 */
-}
-
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_922GS, "922gs", rb922gs_setup);