diff options
author | Piotr Dymacz <pepe2k@gmail.com> | 2017-12-28 11:07:54 +0100 |
---|---|---|
committer | Piotr Dymacz <pepe2k@gmail.com> | 2018-01-15 00:12:13 +0100 |
commit | af8f0629df080bb057dea6cc77a1faacc648ae0d (patch) | |
tree | 2e2d903e580e1ba2af7b2f37bb96c17112678537 /target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c | |
parent | 1f06144cdec1487122201faa9350825ed565d99c (diff) | |
download | upstream-af8f0629df080bb057dea6cc77a1faacc648ae0d.tar.gz upstream-af8f0629df080bb057dea6cc77a1faacc648ae0d.tar.bz2 upstream-af8f0629df080bb057dea6cc77a1faacc648ae0d.zip |
ar71xx: add support for ALFA Network R36A
ALFA Network R36A is a successor of the previous model, the R36 (Ralink
RT3050F based). New version is based on Qualcomm/Atheros QCA9531 v2.
Specification:
- 650/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R (QCA9531) 2.4 GHz, 2x u.fl connectors on PCB
- 1x USB 2.0 (power controlled by GPIO)
- 6x LED (5 of them are driven by GPIO)
- 2x button (reset, wifi/wps)
- external h/w watchdog (EM6324QYSP5B, disabled and not used)
- DC jack for main power input (12 V)
- UART header on PCB
Flash instruction:
You can use sysupgrade image directly in vendor firmware which is based
on LEDE/OpenWrt. Alternatively, you can use web recovery mode in U-Boot:
1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with one of RJ45 ports, press the reset button, power up
device, wait for first blink of all LEDs (indicates network setup),
then keep button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c')
0 files changed, 0 insertions, 0 deletions