ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 218 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
deleted file mode 100644
index 61ff6a755d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- *  OpenMesh OM5P support
- *
- *  Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
- *  Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define OM5P_GPIO_LED_POWER	13
-#define OM5P_GPIO_LED_GREEN	16
-#define OM5P_GPIO_LED_RED	19
-#define OM5P_GPIO_LED_YELLOW	17
-#define OM5P_GPIO_LED_LAN	14
-#define OM5P_GPIO_LED_WAN	15
-#define OM5P_GPIO_BTN_RESET	4
-#define OM5P_GPIO_I2C_SCL	20
-#define OM5P_GPIO_I2C_SDA	21
-
-#define OM5P_KEYS_POLL_INTERVAL		20	/* msecs */
-#define OM5P_KEYS_DEBOUNCE_INTERVAL	(3 * OM5P_KEYS_POLL_INTERVAL)
-
-#define OM5P_WMAC_CALDATA_OFFSET	0x1000
-#define OM5P_PCI_CALDATA_OFFSET		0x5000
-
-static struct gpio_led om5p_leds_gpio[] __initdata = {
-	{
-		.name		= "om5p:blue:power",
-		.gpio		= OM5P_GPIO_LED_POWER,
-		.active_low	= 1,
-	}, {
-		.name		= "om5p:red:wifi",
-		.gpio		= OM5P_GPIO_LED_RED,
-		.active_low	= 1,
-	}, {
-		.name		= "om5p:yellow:wifi",
-		.gpio		= OM5P_GPIO_LED_YELLOW,
-		.active_low	= 1,
-	}, {
-		.name		= "om5p:green:wifi",
-		.gpio		= OM5P_GPIO_LED_GREEN,
-		.active_low	= 1,
-	}, {
-		.name		= "om5p:blue:lan",
-		.gpio		= OM5P_GPIO_LED_LAN,
-		.active_low	= 1,
-	}, {
-		.name		= "om5p:blue:wan",
-		.gpio		= OM5P_GPIO_LED_WAN,
-		.active_low	= 1,
-	}
-};
-
-static struct gpio_keys_button om5p_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = OM5P_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= OM5P_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}
-};
-
-static struct flash_platform_data om5p_flash_data = {
-	.type = "mx25l12805d",
-};
-
-static void __init om5p_setup(void)
-{
-	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
-	u8 mac[6];
-
-	/* make lan / wan leds software controllable */
-	ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
-	ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
-
-	ath79_register_m25p80(&om5p_flash_data);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
-				 om5p_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, OM5P_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(om5p_gpio_keys),
-					om5p_gpio_keys);
-
-	ath79_init_mac(mac, art, 2);
-	ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
-
-	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-	ath79_register_mdio(1, 0x0);
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
-	ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
-
-	/* GMAC0 is connected to the PHY0 of the internal switch */
-	ath79_switch_data.phy4_mii_en = 1;
-	ath79_switch_data.phy_poll_mask = BIT(0);
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
-	ath79_eth0_data.phy_mask = BIT(0);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-	ath79_register_eth(0);
-
-	/* GMAC1 is connected to the internal switch */
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-	ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM5P, "OM5P", "OpenMesh OM5P", om5p_setup);
-
-static struct i2c_gpio_platform_data om5pan_i2c_device_platdata = {
-	.sda_pin		= OM5P_GPIO_I2C_SDA,
-	.scl_pin		= OM5P_GPIO_I2C_SCL,
-	.udelay			= 10,
-	.sda_is_open_drain	= 1,
-	.scl_is_open_drain	= 1,
-};
-
-static struct platform_device om5pan_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &om5pan_i2c_device_platdata,
-	},
-};
-
-static struct i2c_board_info om5pan_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("tmp423", 0x4c),
-	},
-};
-
-static struct at803x_platform_data om5p_an_at803x_data = {
-	.disable_smarteee = 1,
-	.enable_rgmii_rx_delay = 1,
-	.enable_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info om5p_an_mdio0_info[] = {
-	{
-		.bus_id = "ag71xx-mdio.0",
-		.mdio_addr = 7,
-		.platform_data = &om5p_an_at803x_data,
-	},
-};
-
-static void __init om5p_an_setup(void)
-{
-	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
-	u8 mac[6];
-
-	/* temperature sensor */
-	platform_device_register(&om5pan_i2c_device);
-	i2c_register_board_info(0, om5pan_i2c_devs,
-				ARRAY_SIZE(om5pan_i2c_devs));
-
-	/* make lan / wan leds software controllable */
-	ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
-	ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
-
-	ath79_register_m25p80(&om5p_flash_data);
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
-				 om5p_leds_gpio);
-
-	ath79_init_mac(mac, art, 0x02);
-	ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
-
-	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-	ath79_setup_ar934x_eth_rx_delay(2, 2);
-	ath79_register_mdio(0, 0x0);
-	ath79_register_mdio(1, 0x0);
-
-	mdiobus_register_board_info(om5p_an_mdio0_info,
-				    ARRAY_SIZE(om5p_an_mdio0_info));
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
-	ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
-
-	/* GMAC0 is connected to the PHY7 */
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-	ath79_eth0_data.phy_mask = BIT(7);
-	ath79_eth0_pll_data.pll_1000 = 0x02000000;
-	ath79_eth0_pll_data.pll_100 = 0x00000101;
-	ath79_eth0_pll_data.pll_10 = 0x00001313;
-	ath79_register_eth(0);
-
-	/* GMAC1 is connected to the internal switch */
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-	ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
-	ath79_register_eth(1);
-
-	ath79_init_mac(mac, art, 0x10);
-	ap91_pci_init(art + OM5P_PCI_CALDATA_OFFSET, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM5P_AN, "OM5P-AN", "OpenMesh OM5P AN", om5p_an_setup);