ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 220 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c
deleted file mode 100644
index ca007779ec..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  Zyxel NBG 460N/550N/550NH board support
- *
- *  Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
- *
- *  based on mach-tl-wr1043nd.c
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-/* LEDs */
-#define NBG460N_GPIO_LED_WPS		3
-#define NBG460N_GPIO_LED_WAN		6
-#define NBG460N_GPIO_LED_POWER		14
-#define NBG460N_GPIO_LED_WLAN		15
-
-/* Buttons */
-#define NBG460N_GPIO_BTN_WPS		12
-#define NBG460N_GPIO_BTN_RESET		21
-
-#define NBG460N_KEYS_POLL_INTERVAL	20	/* msecs */
-#define NBG460N_KEYS_DEBOUNCE_INTERVAL	(3 * NBG460N_KEYS_POLL_INTERVAL)
-
-/* RTC chip PCF8563 I2C interface */
-#define NBG460N_GPIO_PCF8563_SDA	8
-#define NBG460N_GPIO_PCF8563_SCK	7
-
-/* Switch configuration I2C interface */
-#define NBG460N_GPIO_RTL8366_SDA	16
-#define NBG460N_GPIO_RTL8366_SCK	18
-
-static struct mtd_partition nbg460n_partitions[] = {
-	{
-		.name		= "Bootbase",
-		.offset		= 0,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "U-Boot Config",
-		.offset		= 0x010000,
-		.size		= 0x030000,
-	}, {
-		.name		= "U-Boot",
-		.offset		= 0x040000,
-		.size		= 0x030000,
-	}, {
-		.name		= "linux",
-		.offset		= 0x070000,
-		.size		= 0x0e0000,
-	}, {
-		.name		= "rootfs",
-		.offset		= 0x150000,
-		.size		= 0x2a0000,
-	}, {
-		.name		= "CalibData",
-		.offset		= 0x3f0000,
-		.size		= 0x010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "firmware",
-		.offset		= 0x070000,
-		.size		= 0x380000,
-	}
-};
-
-static struct flash_platform_data nbg460n_flash_data = {
-	.parts		= nbg460n_partitions,
-	.nr_parts       = ARRAY_SIZE(nbg460n_partitions),
-};
-
-static struct gpio_led nbg460n_leds_gpio[] __initdata = {
-	{
-		.name		= "nbg460n:green:power",
-		.gpio		= NBG460N_GPIO_LED_POWER,
-		.active_low	= 0,
-		.default_trigger = "default-on",
-	}, {
-		.name		= "nbg460n:green:wps",
-		.gpio		= NBG460N_GPIO_LED_WPS,
-		.active_low	= 0,
-	}, {
-		.name		= "nbg460n:green:wlan",
-		.gpio		= NBG460N_GPIO_LED_WLAN,
-		.active_low	= 0,
-	}, {
-		/* Not really for controlling the LED,
-		   when set low the LED blinks uncontrollable  */
-		.name		= "nbg460n:green:wan",
-		.gpio		= NBG460N_GPIO_LED_WAN,
-		.active_low	= 0,
-	}
-};
-
-static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = {
-	{
-		.desc		= "reset",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= NBG460N_GPIO_BTN_RESET,
-		.active_low	= 1,
-	}, {
-		.desc		= "wps",
-		.type		= EV_KEY,
-		.code		= KEY_WPS_BUTTON,
-		.debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= NBG460N_GPIO_BTN_WPS,
-		.active_low	= 1,
-	}
-};
-
-static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
-	.sda_pin	= NBG460N_GPIO_PCF8563_SDA,
-	.scl_pin	= NBG460N_GPIO_PCF8563_SCK,
-	.udelay		= 10,
-};
-
-static struct platform_device nbg460n_i2c_device = {
-	.name		= "i2c-gpio",
-	.id		= -1,
-	.num_resources	= 0,
-	.resource	= NULL,
-	.dev		= {
-		.platform_data	= &nbg460n_i2c_device_platdata,
-	},
-};
-
-static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static void nbg460n_i2c_init(void)
-{
-	/* The gpio interface */
-	platform_device_register(&nbg460n_i2c_device);
-	/* I2C devices */
-	i2c_register_board_info(0, nbg460n_i2c_devs,
-				ARRAY_SIZE(nbg460n_i2c_devs));
-}
-
-
-static struct rtl8366_platform_data nbg460n_rtl8366s_data = {
-	.gpio_sda	= NBG460N_GPIO_RTL8366_SDA,
-	.gpio_sck	= NBG460N_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device nbg460n_rtl8366s_device = {
-	.name		= RTL8366S_DRIVER_NAME,
-	.id		= -1,
-	.dev = {
-		.platform_data	= &nbg460n_rtl8366s_data,
-	}
-};
-
-static void __init nbg460n_setup(void)
-{
-	/* end of bootloader sector contains mac address */
-	u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
-	/* last sector contains wlan calib data */
-	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
-	/* LAN Port */
-	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-	ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.speed = SPEED_1000;
-	ath79_eth0_data.duplex = DUPLEX_FULL;
-
-	/* WAN Port */
-	ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-	ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
-	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth1_data.phy_mask = 0x10;
-
-	ath79_register_eth(0);
-	ath79_register_eth(1);
-
-	/* register the switch phy */
-	platform_device_register(&nbg460n_rtl8366s_device);
-
-	/* register flash */
-	ath79_register_m25p80(&nbg460n_flash_data);
-
-	ath79_register_wmac(eeprom, mac);
-
-	/* register RTC chip */
-	nbg460n_i2c_init();
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
-				 nbg460n_leds_gpio);
-
-	ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(nbg460n_gpio_keys),
-					nbg460n_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH",
-	     nbg460n_setup);