ar71xx: drop target

This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 181 deletions

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c
deleted file mode 100644
index 6b83c4cdf4..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * MR900 board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define MR900_GPIO_LED_LAN		12
-#define MR900_GPIO_LED_WLAN_2G		13
-#define MR900_GPIO_LED_STATUS_GREEN	19
-#define MR900_GPIO_LED_STATUS_RED	21
-#define MR900_GPIO_LED_POWER		22
-#define MR900_GPIO_LED_WLAN_5G		23
-
-#define MR900_GPIO_BTN_RESET		17
-
-#define MR900_KEYS_POLL_INTERVAL	20	/* msecs */
-#define MR900_KEYS_DEBOUNCE_INTERVAL	(3 * MR900_KEYS_POLL_INTERVAL)
-
-#define MR900_MAC0_OFFSET		0
-#define MR900_WMAC_CALDATA_OFFSET	0x1000
-#define MR900_PCIE_CALDATA_OFFSET	0x5000
-
-static struct gpio_led mr900_leds_gpio[] __initdata = {
-	{
-		.name		= "mr900:blue:power",
-		.gpio		= MR900_GPIO_LED_POWER,
-		.active_low	= 1,
-	},
-	{
-		.name		= "mr900:blue:wan",
-		.gpio		= MR900_GPIO_LED_LAN,
-		.active_low	= 1,
-	},
-	{
-		.name		= "mr900:blue:wlan24",
-		.gpio		= MR900_GPIO_LED_WLAN_2G,
-		.active_low	= 1,
-	},
-	{
-		.name		= "mr900:blue:wlan58",
-		.gpio		= MR900_GPIO_LED_WLAN_5G,
-		.active_low	= 1,
-	},
-	{
-		.name		= "mr900:green:status",
-		.gpio		= MR900_GPIO_LED_STATUS_GREEN,
-		.active_low	= 1,
-	},
-	{
-		.name		= "mr900:red:status",
-		.gpio		= MR900_GPIO_LED_STATUS_RED,
-		.active_low	= 1,
-	},
-};
-
-static struct gpio_keys_button mr900_gpio_keys[] __initdata = {
-	{
-		.desc		= "Reset button",
-		.type		= EV_KEY,
-		.code		= KEY_RESTART,
-		.debounce_interval = MR900_KEYS_DEBOUNCE_INTERVAL,
-		.gpio		= MR900_GPIO_BTN_RESET,
-		.active_low	= 1,
-	},
-};
-
-static struct at803x_platform_data mr900_at803x_data = {
-	.disable_smarteee = 1,
-	.enable_rgmii_rx_delay = 1,
-	.enable_rgmii_tx_delay = 0,
-	.fixup_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info mr900_mdio0_info[] = {
-	{
-		.bus_id = "ag71xx-mdio.0",
-		.mdio_addr = 5,
-		.platform_data = &mr900_at803x_data,
-	},
-};
-
-static void __init mr900_setup_qca955x_eth_cfg(u32 mask,
-					       unsigned int rxd,
-					       unsigned int rxdv,
-					       unsigned int txd,
-					       unsigned int txe)
-{
-	void __iomem *base;
-	u32 t;
-
-	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
-	t = mask;
-	t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
-	t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
-	t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
-	t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
-
-	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
-	iounmap(base);
-}
-
-static void __init mr900_setup(void)
-{
-	u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
-	u8 mac[6], pcie_mac[6];
-	struct ath9k_platform_data *pdata;
-
-	ath79_eth0_pll_data.pll_1000 = 0xae000000;
-	ath79_eth0_pll_data.pll_100 = 0xa0000101;
-	ath79_eth0_pll_data.pll_10 = 0xa0001313;
-
-	ath79_register_m25p80(NULL);
-
-	ath79_register_leds_gpio(-1, ARRAY_SIZE(mr900_leds_gpio),
-				 mr900_leds_gpio);
-	ath79_register_gpio_keys_polled(-1, MR900_KEYS_POLL_INTERVAL,
-					ARRAY_SIZE(mr900_gpio_keys),
-					mr900_gpio_keys);
-
-	ath79_init_mac(mac, art + MR900_MAC0_OFFSET, 1);
-	ath79_register_wmac(art + MR900_WMAC_CALDATA_OFFSET, mac);
-	ath79_init_mac(pcie_mac, art + MR900_MAC0_OFFSET, 16);
-	ap91_pci_init(art + MR900_PCIE_CALDATA_OFFSET, pcie_mac);
-	pdata = ap9x_pci_get_wmac_data(0);
-	if (!pdata) {
-		pr_err("mr900: unable to get address of wlan data\n");
-		return;
-	}
-	pdata->use_eeprom = true;
-
-	mr900_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
-	ath79_register_mdio(0, 0x0);
-
-	mdiobus_register_board_info(mr900_mdio0_info,
-				    ARRAY_SIZE(mr900_mdio0_info));
-
-	ath79_init_mac(ath79_eth0_data.mac_addr, art + MR900_MAC0_OFFSET, 0);
-
-	/* GMAC0 is connected to the RMGII interface */
-	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-	ath79_eth0_data.phy_mask = BIT(5);
-	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
-	ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_MR900, "MR900", "OpenMesh MR900", mr900_setup);
-MIPS_MACHINE(ATH79_MACH_MR900v2, "MR900v2", "OpenMesh MR900v2", mr900_setup);